Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe
Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe
brand: DIYTECH SKU:DT2331
Regular price
$3.06
![]()
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancyservice@diytech.cc
Product Introduction:
|
NO. |
Parameter |
Value |
|
1 |
Name |
Soil humidity sensor |
|
2 |
Size |
36*15*7mm |
|
3 |
Voltage |
DC 3.3-12V |
|
4 |
Current |
<20mA; <30mA (output) |
|
5 |
Interface |
+ - DO AO; DO digital value; AO analog value |
|
6 |
Operating Temperature |
-25~85 Celsius |
Application:
It is use?for detecting soil humidity.
?Principle:
The soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.
Using Introduction:
1."+" connects power positive; "-" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, "P" power indicator lamp will be on and the module will operate normally
2.Clockwise/counter clockwise adjust the blue potentiometer, it can improve/reduce the detection sensitivity. Take "Thermal Sensor" as example, if defaults 25?Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25?Celsius,?it can trigger; if counter clockwise adjusting, then higher than 25?Celsius can trigger
3.When clockwise adjusts the potentiometer to "S" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output
4.AO output is analog value (voltage), and it can detect via MCU AD port
When the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor on DO port
No more complex circuits, AO port can collect voltage via MCU AD port
?
Package Included:
1?x? Soil Humidity Hygrometer Moisture Detection Sensor Module with Wire for Arduino
Other Customers also buy:
-
Translation missing: en.products.product.regular_price $0.06{"id":4521847783511,"title":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe","handle":"soil-humidity-moisture-hygrometer-sensor-detection-with-corrosion-probe","description":"\u003cdiv\u003e\n\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan size=\"4\"\u003eProduct Introduction:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eNO.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eParameter\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eValue\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e1\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eName\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSoil humidity sensor\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSize\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e36*15*7mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eVoltage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eDC 3.3-12V\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e4\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eCurrent\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e\u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e5\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eInterface\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e6\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eOperating Temperature\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is use?for detecting soil humidity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e?\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ePrinciple:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUsing Introduction:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25?Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25?Celsius,?it can trigger; if counter clockwise adjusting, then higher than 25?Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/f7628e3392a195d4.jpg\" width=\"655\" height=\"655\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor on DO port\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/cb1cc59bad25c2d3.jpg\" width=\"671\" height=\"671\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eNo more complex circuits, AO port can collect voltage via MCU AD port\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e?\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e1?x? Soil Humidity Hygrometer Moisture Detection Sensor Module with Wire for Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-05-22T21:22:32+08:00","created_at":"2020-05-22T21:22:39+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino"],"price":306,"price_min":306,"price_max":306,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32030449336407,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DT2331","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe","public_title":null,"options":["Default Title"],"price":306,"weight":27,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_1.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_3.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_9.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_7.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_5.jpg?v=1590153760"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759","options":["Title"],"media":[{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276652695639,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276652793943,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_1.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_1.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276652859479,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_3.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_3.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276653088855,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_9.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_9.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276653121623,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_7.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_7.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276653154391,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_5.jpg?v=1590153760"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_5.jpg?v=1590153760","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\n\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan size=\"4\"\u003eProduct Introduction:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eNO.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eParameter\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eValue\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e1\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eName\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSoil humidity sensor\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSize\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e36*15*7mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eVoltage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eDC 3.3-12V\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e4\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eCurrent\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e\u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e5\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eInterface\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e6\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eOperating Temperature\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is use?for detecting soil humidity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e?\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ePrinciple:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUsing Introduction:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25?Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25?Celsius,?it can trigger; if counter clockwise adjusting, then higher than 25?Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/f7628e3392a195d4.jpg\" width=\"655\" height=\"655\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor on DO port\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/cb1cc59bad25c2d3.jpg\" width=\"671\" height=\"671\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eNo more complex circuits, AO port can collect voltage via MCU AD port\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e?\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e1?x? Soil Humidity Hygrometer Moisture Detection Sensor Module with Wire for Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e"} -
Translation missing: en.products.product.regular_price $0.06{"id":4521847783511,"title":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe","handle":"soil-humidity-moisture-hygrometer-sensor-detection-with-corrosion-probe","description":"\u003cdiv\u003e\n\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan size=\"4\"\u003eProduct Introduction:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eNO.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eParameter\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eValue\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e1\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eName\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSoil humidity sensor\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSize\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e36*15*7mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eVoltage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eDC 3.3-12V\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e4\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eCurrent\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e\u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e5\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eInterface\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e6\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eOperating Temperature\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is use?for detecting soil humidity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e?\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ePrinciple:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUsing Introduction:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25?Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25?Celsius,?it can trigger; if counter clockwise adjusting, then higher than 25?Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/f7628e3392a195d4.jpg\" width=\"655\" height=\"655\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor on DO port\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/cb1cc59bad25c2d3.jpg\" width=\"671\" height=\"671\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eNo more complex circuits, AO port can collect voltage via MCU AD port\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e?\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e1?x? Soil Humidity Hygrometer Moisture Detection Sensor Module with Wire for Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-05-22T21:22:32+08:00","created_at":"2020-05-22T21:22:39+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino"],"price":306,"price_min":306,"price_max":306,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32030449336407,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DT2331","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe","public_title":null,"options":["Default Title"],"price":306,"weight":27,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_1.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_3.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_9.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_7.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_5.jpg?v=1590153760"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759","options":["Title"],"media":[{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276652695639,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276652793943,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_1.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_1.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276652859479,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_3.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_3.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276653088855,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_9.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_9.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276653121623,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_7.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_7.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276653154391,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_5.jpg?v=1590153760"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_5.jpg?v=1590153760","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\n\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan size=\"4\"\u003eProduct Introduction:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eNO.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eParameter\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eValue\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e1\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eName\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSoil humidity sensor\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSize\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e36*15*7mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eVoltage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eDC 3.3-12V\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e4\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eCurrent\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e\u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e5\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eInterface\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e6\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eOperating Temperature\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is use?for detecting soil humidity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e?\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ePrinciple:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUsing Introduction:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25?Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25?Celsius,?it can trigger; if counter clockwise adjusting, then higher than 25?Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/f7628e3392a195d4.jpg\" width=\"655\" height=\"655\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor on DO port\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/cb1cc59bad25c2d3.jpg\" width=\"671\" height=\"671\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eNo more complex circuits, AO port can collect voltage via MCU AD port\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e?\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e1?x? Soil Humidity Hygrometer Moisture Detection Sensor Module with Wire for Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e"} -
Translation missing: en.products.product.regular_price $0.09{"id":4521847783511,"title":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe","handle":"soil-humidity-moisture-hygrometer-sensor-detection-with-corrosion-probe","description":"\u003cdiv\u003e\n\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan size=\"4\"\u003eProduct Introduction:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eNO.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eParameter\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eValue\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e1\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eName\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSoil humidity sensor\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSize\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e36*15*7mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eVoltage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eDC 3.3-12V\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e4\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eCurrent\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e\u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e5\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eInterface\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e6\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eOperating Temperature\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is use?for detecting soil humidity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e?\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ePrinciple:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUsing Introduction:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25?Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25?Celsius,?it can trigger; if counter clockwise adjusting, then higher than 25?Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/f7628e3392a195d4.jpg\" width=\"655\" height=\"655\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor on DO port\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/cb1cc59bad25c2d3.jpg\" width=\"671\" height=\"671\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eNo more complex circuits, AO port can collect voltage via MCU AD port\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e?\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e1?x? Soil Humidity Hygrometer Moisture Detection Sensor Module with Wire for Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-05-22T21:22:32+08:00","created_at":"2020-05-22T21:22:39+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino"],"price":306,"price_min":306,"price_max":306,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32030449336407,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DT2331","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe","public_title":null,"options":["Default Title"],"price":306,"weight":27,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_1.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_3.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_9.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_7.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_5.jpg?v=1590153760"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759","options":["Title"],"media":[{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276652695639,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276652793943,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_1.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_1.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276652859479,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_3.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_3.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276653088855,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_9.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_9.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276653121623,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_7.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_7.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276653154391,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_5.jpg?v=1590153760"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_5.jpg?v=1590153760","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\n\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan size=\"4\"\u003eProduct Introduction:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eNO.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eParameter\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eValue\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e1\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eName\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSoil humidity sensor\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSize\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e36*15*7mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eVoltage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eDC 3.3-12V\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e4\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eCurrent\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e\u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e5\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eInterface\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e6\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eOperating Temperature\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is use?for detecting soil humidity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e?\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ePrinciple:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUsing Introduction:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25?Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25?Celsius,?it can trigger; if counter clockwise adjusting, then higher than 25?Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/f7628e3392a195d4.jpg\" width=\"655\" height=\"655\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor on DO port\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/cb1cc59bad25c2d3.jpg\" width=\"671\" height=\"671\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eNo more complex circuits, AO port can collect voltage via MCU AD port\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e?\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e1?x? Soil Humidity Hygrometer Moisture Detection Sensor Module with Wire for Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e"} -
Translation missing: en.products.product.regular_price $0.11{"id":4521847783511,"title":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe","handle":"soil-humidity-moisture-hygrometer-sensor-detection-with-corrosion-probe","description":"\u003cdiv\u003e\n\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan size=\"4\"\u003eProduct Introduction:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eNO.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eParameter\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eValue\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e1\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eName\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSoil humidity sensor\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSize\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e36*15*7mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eVoltage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eDC 3.3-12V\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e4\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eCurrent\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e\u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e5\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eInterface\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e6\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eOperating Temperature\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is use?for detecting soil humidity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e?\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ePrinciple:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUsing Introduction:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25?Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25?Celsius,?it can trigger; if counter clockwise adjusting, then higher than 25?Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/f7628e3392a195d4.jpg\" width=\"655\" height=\"655\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor on DO port\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/cb1cc59bad25c2d3.jpg\" width=\"671\" height=\"671\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eNo more complex circuits, AO port can collect voltage via MCU AD port\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e?\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e1?x? Soil Humidity Hygrometer Moisture Detection Sensor Module with Wire for Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-05-22T21:22:32+08:00","created_at":"2020-05-22T21:22:39+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino"],"price":306,"price_min":306,"price_max":306,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32030449336407,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DT2331","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe","public_title":null,"options":["Default Title"],"price":306,"weight":27,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_1.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_3.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_9.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_7.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_5.jpg?v=1590153760"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759","options":["Title"],"media":[{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276652695639,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276652793943,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_1.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_1.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276652859479,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_3.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_3.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276653088855,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_9.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_9.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276653121623,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_7.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_7.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276653154391,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_5.jpg?v=1590153760"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_5.jpg?v=1590153760","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\n\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan size=\"4\"\u003eProduct Introduction:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eNO.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eParameter\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eValue\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e1\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eName\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSoil humidity sensor\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSize\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e36*15*7mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eVoltage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eDC 3.3-12V\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e4\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eCurrent\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e\u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e5\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eInterface\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e6\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eOperating Temperature\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is use?for detecting soil humidity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e?\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ePrinciple:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUsing Introduction:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25?Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25?Celsius,?it can trigger; if counter clockwise adjusting, then higher than 25?Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/f7628e3392a195d4.jpg\" width=\"655\" height=\"655\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor on DO port\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/cb1cc59bad25c2d3.jpg\" width=\"671\" height=\"671\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eNo more complex circuits, AO port can collect voltage via MCU AD port\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e?\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e1?x? Soil Humidity Hygrometer Moisture Detection Sensor Module with Wire for Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e"} -
Translation missing: en.products.product.regular_price $0.11{"id":4521847783511,"title":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe","handle":"soil-humidity-moisture-hygrometer-sensor-detection-with-corrosion-probe","description":"\u003cdiv\u003e\n\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan size=\"4\"\u003eProduct Introduction:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eNO.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eParameter\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eValue\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e1\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eName\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSoil humidity sensor\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSize\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e36*15*7mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eVoltage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eDC 3.3-12V\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e4\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eCurrent\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e\u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e5\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eInterface\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e6\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eOperating Temperature\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is use?for detecting soil humidity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e?\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ePrinciple:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUsing Introduction:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25?Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25?Celsius,?it can trigger; if counter clockwise adjusting, then higher than 25?Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/f7628e3392a195d4.jpg\" width=\"655\" height=\"655\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor on DO port\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/cb1cc59bad25c2d3.jpg\" width=\"671\" height=\"671\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eNo more complex circuits, AO port can collect voltage via MCU AD port\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e?\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e1?x? Soil Humidity Hygrometer Moisture Detection Sensor Module with Wire for Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-05-22T21:22:32+08:00","created_at":"2020-05-22T21:22:39+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino"],"price":306,"price_min":306,"price_max":306,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32030449336407,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DT2331","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe","public_title":null,"options":["Default Title"],"price":306,"weight":27,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_1.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_3.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_9.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_7.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_5.jpg?v=1590153760"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759","options":["Title"],"media":[{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276652695639,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276652793943,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_1.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_1.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276652859479,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_3.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_3.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276653088855,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_9.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_9.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276653121623,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_7.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_7.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276653154391,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_5.jpg?v=1590153760"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_5.jpg?v=1590153760","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\n\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan size=\"4\"\u003eProduct Introduction:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eNO.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eParameter\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eValue\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e1\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eName\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSoil humidity sensor\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSize\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e36*15*7mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eVoltage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eDC 3.3-12V\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e4\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eCurrent\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e\u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e5\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eInterface\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e6\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eOperating Temperature\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is use?for detecting soil humidity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e?\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ePrinciple:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUsing Introduction:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25?Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25?Celsius,?it can trigger; if counter clockwise adjusting, then higher than 25?Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/f7628e3392a195d4.jpg\" width=\"655\" height=\"655\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor on DO port\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/cb1cc59bad25c2d3.jpg\" width=\"671\" height=\"671\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eNo more complex circuits, AO port can collect voltage via MCU AD port\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e?\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e1?x? Soil Humidity Hygrometer Moisture Detection Sensor Module with Wire for Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e"} -
Translation missing: en.products.product.regular_price $0.11{"id":4521847783511,"title":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe","handle":"soil-humidity-moisture-hygrometer-sensor-detection-with-corrosion-probe","description":"\u003cdiv\u003e\n\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan size=\"4\"\u003eProduct Introduction:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eNO.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eParameter\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eValue\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e1\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eName\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSoil humidity sensor\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSize\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e36*15*7mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eVoltage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eDC 3.3-12V\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e4\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eCurrent\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e\u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e5\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eInterface\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e6\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eOperating Temperature\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is use?for detecting soil humidity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e?\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ePrinciple:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUsing Introduction:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25?Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25?Celsius,?it can trigger; if counter clockwise adjusting, then higher than 25?Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/f7628e3392a195d4.jpg\" width=\"655\" height=\"655\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor on DO port\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/cb1cc59bad25c2d3.jpg\" width=\"671\" height=\"671\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eNo more complex circuits, AO port can collect voltage via MCU AD port\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e?\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e1?x? Soil Humidity Hygrometer Moisture Detection Sensor Module with Wire for Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-05-22T21:22:32+08:00","created_at":"2020-05-22T21:22:39+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino"],"price":306,"price_min":306,"price_max":306,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32030449336407,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DT2331","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe","public_title":null,"options":["Default Title"],"price":306,"weight":27,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_1.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_3.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_9.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_7.jpg?v=1590153759","\/\/diytech.cc\/cdn\/shop\/products\/012796_5.jpg?v=1590153760"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759","options":["Title"],"media":[{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276652695639,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_6.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276652793943,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_1.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_1.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276652859479,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_3.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_3.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276653088855,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_9.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_9.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276653121623,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_7.jpg?v=1590153759"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_7.jpg?v=1590153759","width":1000},{"alt":"Soil Humidity Moisture Hygrometer Sensor Detection With Corrosion Probe Temperature Module","id":6276653154391,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_5.jpg?v=1590153760"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/012796_5.jpg?v=1590153760","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\n\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan size=\"4\"\u003eProduct Introduction:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eNO.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eParameter\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eValue\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e1\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eName\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSoil humidity sensor\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eSize\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e36*15*7mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eVoltage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eDC 3.3-12V\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e4\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eCurrent\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e\u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e5\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eInterface\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"53\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e6\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"188\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003eOperating Temperature\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"328\" valign=\"center\"\u003e\n\u003cp\u003e\u003cspan\u003e-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is use?for detecting soil humidity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e?\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ePrinciple:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUsing Introduction:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25?Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25?Celsius,?it can trigger; if counter clockwise adjusting, then higher than 25?Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/f7628e3392a195d4.jpg\" width=\"655\" height=\"655\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor on DO port\u003cimg src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MzkwNg\/17\/08\/16\/48nwe13pkvoh5tn7\/cb1cc59bad25c2d3.jpg\" width=\"671\" height=\"671\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eNo more complex circuits, AO port can collect voltage via MCU AD port\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e?\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan rwr=\"1\" size=\"4\"\u003e\u003cspan rwr=\"1\"\u003e\u003cspan\u003e1?x? Soil Humidity Hygrometer Moisture Detection Sensor Module with Wire for Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e"}
