Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For A

Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino

brand: DIYTECH SKU:DT870-03

$0.99

Feature:

Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;
3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;
Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;
Micro SD card connector: yes since the bomb deck for easy card insertion and removal.
Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;
Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write

The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files.

Module features are as follows:
1 Support Micro SD Card, Micro SDHC card (high-speed card)
2 the level conversion circuit board that can interface level is 5V or 3.3V
3 power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
4. Communication interface is a standard SPI interface
5. 4 M2 screw positioning holes for easy installation

Package Include:
1 x Micor SD TF Card Shield Expansion Board for Arduino

Batch

3pcs 10pcs

Quantity

guaranteeQuality checked
Special gift cardsSpecial gift cards
Free return Within 60 days
Consultancyservice@diytech.cc

Description

Feature:

Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;
3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;
Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;
Micro SD card connector: yes since the bomb deck for easy card insertion and removal.
Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;
Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write

Manual

Other Customers also buy:

10pcs WH148 Potentiometer Knobs 6mm dia Shaft Hole control knobs caps

$0.06
{"id":4518043549783,"title":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino","handle":"micro-sd-storage-board-mciro-sd-tf-card-memory-spi-shield-module-for-arduino","description":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e1 Support Micro SD Card, Micro SDHC card (high-speed card)\u003cbr\u003e2 the level conversion circuit board that can interface level is 5V or 3.3V\u003cbr\u003e3 power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003cbr\u003e4. Communication interface is a standard SPI interface\u003cbr\u003e5. 4 M2 screw positioning holes for easy installation \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino","published_at":"2020-05-20T02:54:25+08:00","created_at":"2020-05-20T02:54:27+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Shield"],"price":99,"price_min":99,"price_max":294,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179563266135,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT870-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":99,"weight":21,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179563298903,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT870-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":294,"weight":70,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008","options":["Batch"],"media":[{"alt":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino","id":6257476927575,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e1 Support Micro SD Card, Micro SDHC card (high-speed card)\u003cbr\u003e2 the level conversion circuit board that can interface level is 5V or 3.3V\u003cbr\u003e3 power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003cbr\u003e4. Communication interface is a standard SPI interface\u003cbr\u003e5. 4 M2 screw positioning holes for easy installation \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino"}
NFC Smart Card Tag 1k S50 13.56MHz IC Read Write RFID Arduino

$0.06
{"id":4518043549783,"title":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino","handle":"micro-sd-storage-board-mciro-sd-tf-card-memory-spi-shield-module-for-arduino","description":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e1 Support Micro SD Card, Micro SDHC card (high-speed card)\u003cbr\u003e2 the level conversion circuit board that can interface level is 5V or 3.3V\u003cbr\u003e3 power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003cbr\u003e4. Communication interface is a standard SPI interface\u003cbr\u003e5. 4 M2 screw positioning holes for easy installation \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino","published_at":"2020-05-20T02:54:25+08:00","created_at":"2020-05-20T02:54:27+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Shield"],"price":99,"price_min":99,"price_max":294,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179563266135,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT870-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":99,"weight":21,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179563298903,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT870-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":294,"weight":70,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008","options":["Batch"],"media":[{"alt":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino","id":6257476927575,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e1 Support Micro SD Card, Micro SDHC card (high-speed card)\u003cbr\u003e2 the level conversion circuit board that can interface level is 5V or 3.3V\u003cbr\u003e3 power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003cbr\u003e4. Communication interface is a standard SPI interface\u003cbr\u003e5. 4 M2 screw positioning holes for easy installation \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino"}
USB Female Port Connector Breakout Board Power 2.54mm Header for Arduino

$0.09
{"id":4518043549783,"title":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino","handle":"micro-sd-storage-board-mciro-sd-tf-card-memory-spi-shield-module-for-arduino","description":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e1 Support Micro SD Card, Micro SDHC card (high-speed card)\u003cbr\u003e2 the level conversion circuit board that can interface level is 5V or 3.3V\u003cbr\u003e3 power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003cbr\u003e4. Communication interface is a standard SPI interface\u003cbr\u003e5. 4 M2 screw positioning holes for easy installation \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino","published_at":"2020-05-20T02:54:25+08:00","created_at":"2020-05-20T02:54:27+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Shield"],"price":99,"price_min":99,"price_max":294,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179563266135,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT870-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":99,"weight":21,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179563298903,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT870-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":294,"weight":70,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008","options":["Batch"],"media":[{"alt":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino","id":6257476927575,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e1 Support Micro SD Card, Micro SDHC card (high-speed card)\u003cbr\u003e2 the level conversion circuit board that can interface level is 5V or 3.3V\u003cbr\u003e3 power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003cbr\u003e4. Communication interface is a standard SPI interface\u003cbr\u003e5. 4 M2 screw positioning holes for easy installation \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino"}
100PCS Carbon Film Resistor 5% 1/4W 0.25W 1R 1M Ohm 1K 2.2K 4.7K 5.1K 6.8K 10K 15K Resistance 1% +1% 1% Diy Electronic

$0.11
{"id":4518043549783,"title":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino","handle":"micro-sd-storage-board-mciro-sd-tf-card-memory-spi-shield-module-for-arduino","description":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e1 Support Micro SD Card, Micro SDHC card (high-speed card)\u003cbr\u003e2 the level conversion circuit board that can interface level is 5V or 3.3V\u003cbr\u003e3 power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003cbr\u003e4. Communication interface is a standard SPI interface\u003cbr\u003e5. 4 M2 screw positioning holes for easy installation \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino","published_at":"2020-05-20T02:54:25+08:00","created_at":"2020-05-20T02:54:27+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Shield"],"price":99,"price_min":99,"price_max":294,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179563266135,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT870-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":99,"weight":21,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179563298903,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT870-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":294,"weight":70,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008","options":["Batch"],"media":[{"alt":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino","id":6257476927575,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e1 Support Micro SD Card, Micro SDHC card (high-speed card)\u003cbr\u003e2 the level conversion circuit board that can interface level is 5V or 3.3V\u003cbr\u003e3 power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003cbr\u003e4. Communication interface is a standard SPI interface\u003cbr\u003e5. 4 M2 screw positioning holes for easy installation \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino"}
3-6V DC 0.35-0.4A R130 motor Type 130 Hobby micro motors 8000 RPM UK CF

$0.11
{"id":4518043549783,"title":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino","handle":"micro-sd-storage-board-mciro-sd-tf-card-memory-spi-shield-module-for-arduino","description":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e1 Support Micro SD Card, Micro SDHC card (high-speed card)\u003cbr\u003e2 the level conversion circuit board that can interface level is 5V or 3.3V\u003cbr\u003e3 power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003cbr\u003e4. Communication interface is a standard SPI interface\u003cbr\u003e5. 4 M2 screw positioning holes for easy installation \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino","published_at":"2020-05-20T02:54:25+08:00","created_at":"2020-05-20T02:54:27+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Shield"],"price":99,"price_min":99,"price_max":294,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179563266135,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT870-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":99,"weight":21,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179563298903,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT870-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":294,"weight":70,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008","options":["Batch"],"media":[{"alt":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino","id":6257476927575,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e1 Support Micro SD Card, Micro SDHC card (high-speed card)\u003cbr\u003e2 the level conversion circuit board that can interface level is 5V or 3.3V\u003cbr\u003e3 power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003cbr\u003e4. Communication interface is a standard SPI interface\u003cbr\u003e5. 4 M2 screw positioning holes for easy installation \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino"}
6.0V-12V to 5V AMS1117-5.0V Power Supply Module AMS1117-5.0

$0.11
{"id":4518043549783,"title":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino","handle":"micro-sd-storage-board-mciro-sd-tf-card-memory-spi-shield-module-for-arduino","description":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e1 Support Micro SD Card, Micro SDHC card (high-speed card)\u003cbr\u003e2 the level conversion circuit board that can interface level is 5V or 3.3V\u003cbr\u003e3 power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003cbr\u003e4. Communication interface is a standard SPI interface\u003cbr\u003e5. 4 M2 screw positioning holes for easy installation \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino","published_at":"2020-05-20T02:54:25+08:00","created_at":"2020-05-20T02:54:27+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Shield"],"price":99,"price_min":99,"price_max":294,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179563266135,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT870-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":99,"weight":21,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179563298903,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT870-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":294,"weight":70,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008","options":["Batch"],"media":[{"alt":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino","id":6257476927575,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1541056136_rTy6Y.jpg?v=1592420008","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e1 Support Micro SD Card, Micro SDHC card (high-speed card)\u003cbr\u003e2 the level conversion circuit board that can interface level is 5V or 3.3V\u003cbr\u003e3 power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003cbr\u003e4. Communication interface is a standard SPI interface\u003cbr\u003e5. 4 M2 screw positioning holes for easy installation \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino"}

Compare Box
Images
Name
Price
Vendor
Type
Variant
Available
Remove
Detail

Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino

Login

Reset your password

Register