MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino
MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino
brand: DIYTECH SKU:DT36-03- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancyservice@diytech.cc
Overview:
1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.
2.This protuct does everything for you, and can be easily interfaced with any microcontroller,
even one without an analog input.
3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any
breadboard or perfboard).
Specification:
1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero
2. SPI interfaces, high-speed transmission
3. the input voltage is 3-5v DC
4. direct digital output temperature value, no amplifiers, no ADC
5. 14-bit resolution, 0.25 degree temperature accuracy
Note:
1.Works with any K type thermocouple
2 K thermocouples have about ¡À2¡ãC to ¡À6¡ãC accuracy
4.Internal temperature reading
5.3 to 5v power supply and logic level compliant!
6.SPI data output requires any 3 digital I/O pins.
The MAX31855 GND and T- cannot be connected because there is a control switch inside.
Packing Included:
1 x MAX31855 K Type Thermocouple Breakout Board
Other Customers also buy:
-
$4.85{"id":4518033129559,"title":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino","handle":"max31855-k-type-thermocouple-breakout-board-temperature-200c-to-1350-c-for-arduino","description":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ¡À2¡ãC to ¡À6¡ãC accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e","published_at":"2020-05-20T02:48:51+08:00","created_at":"2020-05-20T02:48:53+08:00","vendor":"DIYTECH","type":"Adapter Module","tags":["Amplifier","Arduino","For Arduino"],"price":667,"price_min":667,"price_max":1978,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179551895639,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT36-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":667,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179551928407,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT36-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1978,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961","options":["Batch"],"media":[{"alt":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino","id":6257446256727,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ¡À2¡ãC to ¡À6¡ãC accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e"}
-
$5.49{"id":4518033129559,"title":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino","handle":"max31855-k-type-thermocouple-breakout-board-temperature-200c-to-1350-c-for-arduino","description":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ¡À2¡ãC to ¡À6¡ãC accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e","published_at":"2020-05-20T02:48:51+08:00","created_at":"2020-05-20T02:48:53+08:00","vendor":"DIYTECH","type":"Adapter Module","tags":["Amplifier","Arduino","For Arduino"],"price":667,"price_min":667,"price_max":1978,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179551895639,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT36-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":667,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179551928407,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT36-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1978,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961","options":["Batch"],"media":[{"alt":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino","id":6257446256727,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ¡À2¡ãC to ¡À6¡ãC accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e"}
-
$5.99{"id":4518033129559,"title":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino","handle":"max31855-k-type-thermocouple-breakout-board-temperature-200c-to-1350-c-for-arduino","description":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ¡À2¡ãC to ¡À6¡ãC accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e","published_at":"2020-05-20T02:48:51+08:00","created_at":"2020-05-20T02:48:53+08:00","vendor":"DIYTECH","type":"Adapter Module","tags":["Amplifier","Arduino","For Arduino"],"price":667,"price_min":667,"price_max":1978,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179551895639,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT36-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":667,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179551928407,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT36-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1978,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961","options":["Batch"],"media":[{"alt":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino","id":6257446256727,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ¡À2¡ãC to ¡À6¡ãC accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e"}
-
$16.80{"id":4518033129559,"title":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino","handle":"max31855-k-type-thermocouple-breakout-board-temperature-200c-to-1350-c-for-arduino","description":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ¡À2¡ãC to ¡À6¡ãC accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e","published_at":"2020-05-20T02:48:51+08:00","created_at":"2020-05-20T02:48:53+08:00","vendor":"DIYTECH","type":"Adapter Module","tags":["Amplifier","Arduino","For Arduino"],"price":667,"price_min":667,"price_max":1978,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179551895639,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT36-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":667,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179551928407,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT36-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1978,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961","options":["Batch"],"media":[{"alt":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino","id":6257446256727,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ¡À2¡ãC to ¡À6¡ãC accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e"}
-
$0.66{"id":4518033129559,"title":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino","handle":"max31855-k-type-thermocouple-breakout-board-temperature-200c-to-1350-c-for-arduino","description":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ¡À2¡ãC to ¡À6¡ãC accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e","published_at":"2020-05-20T02:48:51+08:00","created_at":"2020-05-20T02:48:53+08:00","vendor":"DIYTECH","type":"Adapter Module","tags":["Amplifier","Arduino","For Arduino"],"price":667,"price_min":667,"price_max":1978,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179551895639,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT36-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":667,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179551928407,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT36-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1978,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961","options":["Batch"],"media":[{"alt":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino","id":6257446256727,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ¡À2¡ãC to ¡À6¡ãC accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e"}
-
$11.64{"id":4518033129559,"title":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino","handle":"max31855-k-type-thermocouple-breakout-board-temperature-200c-to-1350-c-for-arduino","description":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ¡À2¡ãC to ¡À6¡ãC accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e","published_at":"2020-05-20T02:48:51+08:00","created_at":"2020-05-20T02:48:53+08:00","vendor":"DIYTECH","type":"Adapter Module","tags":["Amplifier","Arduino","For Arduino"],"price":667,"price_min":667,"price_max":1978,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179551895639,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT36-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":667,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179551928407,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT36-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1978,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961","options":["Batch"],"media":[{"alt":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350??C for Arduino","id":6257446256727,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1536895866_httYZ.jpg?v=1592419961","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ¡À2¡ãC to ¡À6¡ãC accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e"}