Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro

Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini

brand: DIYTECH SKU:DT3515-03

$11.01

Description:

4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx
Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.
There is a voltage regulator on board so it can accept voltage up to 12VDC.
If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.
This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.
We've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED
Dimensions: 1.3x0.7'

Specification:

ATMega 32U4 running at 5V/16MHz
Supported under Arduino IDE v1.0.1
On-Board micro-USB connector for programming
4 x 10-bit ADC pins
12 x Digital I/Os (5 are PWM capable)
Rx and Tx Hardware Serial Connections
The Smallest Arduino-Compatible Board Yet

Package Included:
1*Leonardo Pro Micro ATmega32U4 Board

Batch

3pcs 10pcs

Quantity

guaranteeQuality checked
Special gift cardsSpecial gift cards
Free return Within 60 days
Consultancyservice@diytech.cc

Description

Description:

4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx
Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.
There is a voltage regulator on board so it can accept voltage up to 12VDC.
If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.
This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.
We've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED
Dimensions: 1.3x0.7'

Specification:

ATMega 32U4 running at 5V/16MHz
Supported under Arduino IDE v1.0.1
On-Board micro-USB connector for programming
4 x 10-bit ADC pins
12 x Digital I/Os (5 are PWM capable)
Rx and Tx Hardware Serial Connections
The Smallest Arduino-Compatible Board Yet

Package Included:
1*Leonardo Pro Micro ATmega32U4 Board

Manual

Other Customers also buy:

10pcs WH148 Potentiometer Knobs 6mm dia Shaft Hole control knobs caps

$0.06
{"id":4518031261783,"title":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","handle":"leonardo-pro-micro-atmega32u4-arduino-bootloader-ide-1-0-3-replace-pro-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7'\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Leonardo Pro Micro ATmega32U4 Board","published_at":"2020-05-20T02:47:51+08:00","created_at":"2020-05-20T02:47:55+08:00","vendor":"DIYTECH","type":"Expansion board","tags":["Arduino","For Arduino","Pro Micro","Pro Mini","Shield"],"price":1101,"price_min":1101,"price_max":3266,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179549896791,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3515-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini - 3pcs","public_title":"3pcs","options":["3pcs"],"price":1101,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179549929559,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3515-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini - 10pcs","public_title":"10pcs","options":["10pcs"],"price":3266,"weight":120,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942","options":["Batch"],"media":[{"alt":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","id":6257442029655,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7'\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Leonardo Pro Micro ATmega32U4 Board"}
NFC Smart Card Tag 1k S50 13.56MHz IC Read Write RFID Arduino

$0.06
{"id":4518031261783,"title":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","handle":"leonardo-pro-micro-atmega32u4-arduino-bootloader-ide-1-0-3-replace-pro-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7'\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Leonardo Pro Micro ATmega32U4 Board","published_at":"2020-05-20T02:47:51+08:00","created_at":"2020-05-20T02:47:55+08:00","vendor":"DIYTECH","type":"Expansion board","tags":["Arduino","For Arduino","Pro Micro","Pro Mini","Shield"],"price":1101,"price_min":1101,"price_max":3266,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179549896791,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3515-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini - 3pcs","public_title":"3pcs","options":["3pcs"],"price":1101,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179549929559,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3515-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini - 10pcs","public_title":"10pcs","options":["10pcs"],"price":3266,"weight":120,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942","options":["Batch"],"media":[{"alt":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","id":6257442029655,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7'\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Leonardo Pro Micro ATmega32U4 Board"}
USB Female Port Connector Breakout Board Power 2.54mm Header for Arduino

$0.09
{"id":4518031261783,"title":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","handle":"leonardo-pro-micro-atmega32u4-arduino-bootloader-ide-1-0-3-replace-pro-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7'\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Leonardo Pro Micro ATmega32U4 Board","published_at":"2020-05-20T02:47:51+08:00","created_at":"2020-05-20T02:47:55+08:00","vendor":"DIYTECH","type":"Expansion board","tags":["Arduino","For Arduino","Pro Micro","Pro Mini","Shield"],"price":1101,"price_min":1101,"price_max":3266,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179549896791,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3515-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini - 3pcs","public_title":"3pcs","options":["3pcs"],"price":1101,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179549929559,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3515-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini - 10pcs","public_title":"10pcs","options":["10pcs"],"price":3266,"weight":120,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942","options":["Batch"],"media":[{"alt":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","id":6257442029655,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7'\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Leonardo Pro Micro ATmega32U4 Board"}
100PCS Carbon Film Resistor 5% 1/4W 0.25W 1R 1M Ohm 1K 2.2K 4.7K 5.1K 6.8K 10K 15K Resistance 1% +1% 1% Diy Electronic

$0.11
{"id":4518031261783,"title":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","handle":"leonardo-pro-micro-atmega32u4-arduino-bootloader-ide-1-0-3-replace-pro-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7'\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Leonardo Pro Micro ATmega32U4 Board","published_at":"2020-05-20T02:47:51+08:00","created_at":"2020-05-20T02:47:55+08:00","vendor":"DIYTECH","type":"Expansion board","tags":["Arduino","For Arduino","Pro Micro","Pro Mini","Shield"],"price":1101,"price_min":1101,"price_max":3266,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179549896791,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3515-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini - 3pcs","public_title":"3pcs","options":["3pcs"],"price":1101,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179549929559,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3515-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini - 10pcs","public_title":"10pcs","options":["10pcs"],"price":3266,"weight":120,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942","options":["Batch"],"media":[{"alt":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","id":6257442029655,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7'\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Leonardo Pro Micro ATmega32U4 Board"}
3-6V DC 0.35-0.4A R130 motor Type 130 Hobby micro motors 8000 RPM UK CF

$0.11
{"id":4518031261783,"title":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","handle":"leonardo-pro-micro-atmega32u4-arduino-bootloader-ide-1-0-3-replace-pro-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7'\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Leonardo Pro Micro ATmega32U4 Board","published_at":"2020-05-20T02:47:51+08:00","created_at":"2020-05-20T02:47:55+08:00","vendor":"DIYTECH","type":"Expansion board","tags":["Arduino","For Arduino","Pro Micro","Pro Mini","Shield"],"price":1101,"price_min":1101,"price_max":3266,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179549896791,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3515-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini - 3pcs","public_title":"3pcs","options":["3pcs"],"price":1101,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179549929559,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3515-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini - 10pcs","public_title":"10pcs","options":["10pcs"],"price":3266,"weight":120,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942","options":["Batch"],"media":[{"alt":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","id":6257442029655,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7'\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Leonardo Pro Micro ATmega32U4 Board"}
6.0V-12V to 5V AMS1117-5.0V Power Supply Module AMS1117-5.0

$0.11
{"id":4518031261783,"title":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","handle":"leonardo-pro-micro-atmega32u4-arduino-bootloader-ide-1-0-3-replace-pro-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7'\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Leonardo Pro Micro ATmega32U4 Board","published_at":"2020-05-20T02:47:51+08:00","created_at":"2020-05-20T02:47:55+08:00","vendor":"DIYTECH","type":"Expansion board","tags":["Arduino","For Arduino","Pro Micro","Pro Mini","Shield"],"price":1101,"price_min":1101,"price_max":3266,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179549896791,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3515-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini - 3pcs","public_title":"3pcs","options":["3pcs"],"price":1101,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179549929559,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3515-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini - 10pcs","public_title":"10pcs","options":["10pcs"],"price":3266,"weight":120,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942","options":["Batch"],"media":[{"alt":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","id":6257442029655,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_4125.jpg?v=1592419942","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7'\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Leonardo Pro Micro ATmega32U4 Board"}

Compare Box
Images
Name
Price
Vendor
Type
Variant
Available
Remove
Detail

Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini

Login

Reset your password

Register