ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmissi

ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module

brand: DIYTECH SKU:DT3882-03

$9.36

Overview:
TTL-WiFi is designed and developed based on ESP-M2 WiFi module, which is extracted the TTL, EN, STATE and other pins
Importantly, the TTL-WiFi is already built-in the serial transparent transmission firmware programmed by our company (SZdoit), which can realize the transparent transmit the data to the cloud on the real-time, together with low-power control, status indictor
This board can replace the old wiring serial WiFi device to realize the data collection and control.
Fully compatible with the original electrical interface and physical interface for the serial transparent Bluetooth
?
Features:
Built-in the industrial transparent transmission firmware V3.0 with stability and reliability by using the Web Configuration;
Built-in the high performance WiFi module ESP-M2 with size: 34mm17mm4mm
Working voltage: 4.5V~6.0V, TTL working voltage: 3.3V (compatible with 5.0V)
Provided pins: STATE, TXD, RXD,EN
Average current: 80mA; when data sent, it is 170mA; but it is 20¦ÌA at deep sleep mode;
Support serial AT command
Support re-programmable, OTA firmware update
Seamless transparent transmission between serial and WiFi
Built-in HTTP Web Server, support configure parameters by web page
Support re-connect automatically at WiFi STA mode and TCP Client
Support set baud rate, data bit, parity check, stop bits, and/or subcontracting time;
Support baud rate (bps): 300/600/1200/2400/4800/9600/19200/38400/57600/74800/115200/
230400/460800/921600/1843200/3686400
Support AP enable, self-defined SSID/password, self-defined IP and network duration;
Automatically scan the peripheral WiFi hotspot, support STA enable, DHCP, self-defined IP;
Support TCP Server, TCP Client, UDP Server, UDP Client and UDP local broadcast;
Support DNS resolution automatically for the remote sever address
Support checking the status by AT command
Provide IO4 to show the WiFi status
Working temperature: -40 Degrees Celsius-125 Degrees Celsius
?
Applications:
smart home, wireless data connection and transparent transmission, smart car control, wireless serial printer, LED light industrial control etc.

Package Included:
1*ESP8285 ESP-M2 WIFI Serial Board

Batch

3pcs 10pcs

Quantity

guaranteeQuality checked
Special gift cardsSpecial gift cards
Free return Within 60 days
Consultancyservice@diytech.cc

Description

Manual

Other Customers also buy:

10pcs WH148 Potentiometer Knobs 6mm dia Shaft Hole control knobs caps

$0.06
{"id":4518013337687,"title":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module","handle":"esp8285-esp-m2-wireless-wifi-serial-board-ttl-port-for-wifi-transmission-module","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eTTL-WiFi is designed and developed based on ESP-M2 WiFi module, which is extracted the TTL, EN, STATE and other pins\u003cbr\u003eImportantly, the TTL-WiFi is already built-in the serial transparent transmission firmware programmed by our company (SZdoit), which can realize the transparent transmit the data to the cloud on the real-time, together with low-power control, status indictor\u003cbr\u003eThis board can replace the old wiring serial WiFi device to realize the data collection and control.\u003cbr\u003eFully compatible with the original electrical interface and physical interface for the serial transparent Bluetooth\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eBuilt-in the industrial transparent transmission firmware V3.0 with stability and reliability by using the Web Configuration;\u003cbr\u003eBuilt-in the high performance WiFi module ESP-M2 with size: 34mm17mm4mm\u003cbr\u003eWorking voltage: 4.5V~6.0V, TTL working voltage: 3.3V (compatible with 5.0V)\u003cbr\u003eProvided pins: STATE, TXD, RXD,EN\u003cbr\u003eAverage current: 80mA; when data sent, it is 170mA; but it is 20¦ÌA at deep sleep mode;\u003cbr\u003eSupport serial AT command\u003cbr\u003eSupport re-programmable, OTA firmware update\u003cbr\u003eSeamless transparent transmission between serial and WiFi\u003cbr\u003eBuilt-in HTTP Web Server, support configure parameters by web page\u003cbr\u003eSupport re-connect automatically at WiFi STA mode and TCP Client\u003cbr\u003eSupport set baud rate, data bit, parity check, stop bits, and\/or subcontracting time;\u003cbr\u003eSupport baud rate (bps): 300\/600\/1200\/2400\/4800\/9600\/19200\/38400\/57600\/74800\/115200\/\u003cbr\u003e230400\/460800\/921600\/1843200\/3686400\u003cbr\u003eSupport AP enable, self-defined SSID\/password, self-defined IP and network duration;\u003cbr\u003eAutomatically scan the peripheral WiFi hotspot, support STA enable, DHCP, self-defined IP;\u003cbr\u003eSupport TCP Server, TCP Client, UDP Server, UDP Client and UDP local broadcast;\u003cbr\u003eSupport DNS resolution automatically for the remote sever address\u003cbr\u003eSupport checking the status by AT command\u003cbr\u003eProvide IO4 to show the WiFi status\u003cbr\u003eWorking temperature: -40 Degrees Celsius-125 Degrees Celsius\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cbr\u003esmart home, wireless data connection and transparent transmission, smart car control, wireless serial printer, LED light industrial control etc.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP8285 ESP-M2 WIFI Serial Board\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","published_at":"2020-05-20T02:38:02+08:00","created_at":"2020-05-20T02:38:04+08:00","vendor":"DIYTECH","type":"WIFI Module","tags":["Wireless"],"price":936,"price_min":936,"price_max":2778,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179539312727,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3882-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module - 3pcs","public_title":"3pcs","options":["3pcs"],"price":936,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179539345495,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3882-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module - 10pcs","public_title":"10pcs","options":["10pcs"],"price":2778,"weight":120,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843","options":["Batch"],"media":[{"alt":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module","id":6257384882263,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eTTL-WiFi is designed and developed based on ESP-M2 WiFi module, which is extracted the TTL, EN, STATE and other pins\u003cbr\u003eImportantly, the TTL-WiFi is already built-in the serial transparent transmission firmware programmed by our company (SZdoit), which can realize the transparent transmit the data to the cloud on the real-time, together with low-power control, status indictor\u003cbr\u003eThis board can replace the old wiring serial WiFi device to realize the data collection and control.\u003cbr\u003eFully compatible with the original electrical interface and physical interface for the serial transparent Bluetooth\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eBuilt-in the industrial transparent transmission firmware V3.0 with stability and reliability by using the Web Configuration;\u003cbr\u003eBuilt-in the high performance WiFi module ESP-M2 with size: 34mm17mm4mm\u003cbr\u003eWorking voltage: 4.5V~6.0V, TTL working voltage: 3.3V (compatible with 5.0V)\u003cbr\u003eProvided pins: STATE, TXD, RXD,EN\u003cbr\u003eAverage current: 80mA; when data sent, it is 170mA; but it is 20¦ÌA at deep sleep mode;\u003cbr\u003eSupport serial AT command\u003cbr\u003eSupport re-programmable, OTA firmware update\u003cbr\u003eSeamless transparent transmission between serial and WiFi\u003cbr\u003eBuilt-in HTTP Web Server, support configure parameters by web page\u003cbr\u003eSupport re-connect automatically at WiFi STA mode and TCP Client\u003cbr\u003eSupport set baud rate, data bit, parity check, stop bits, and\/or subcontracting time;\u003cbr\u003eSupport baud rate (bps): 300\/600\/1200\/2400\/4800\/9600\/19200\/38400\/57600\/74800\/115200\/\u003cbr\u003e230400\/460800\/921600\/1843200\/3686400\u003cbr\u003eSupport AP enable, self-defined SSID\/password, self-defined IP and network duration;\u003cbr\u003eAutomatically scan the peripheral WiFi hotspot, support STA enable, DHCP, self-defined IP;\u003cbr\u003eSupport TCP Server, TCP Client, UDP Server, UDP Client and UDP local broadcast;\u003cbr\u003eSupport DNS resolution automatically for the remote sever address\u003cbr\u003eSupport checking the status by AT command\u003cbr\u003eProvide IO4 to show the WiFi status\u003cbr\u003eWorking temperature: -40 Degrees Celsius-125 Degrees Celsius\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cbr\u003esmart home, wireless data connection and transparent transmission, smart car control, wireless serial printer, LED light industrial control etc.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP8285 ESP-M2 WIFI Serial Board\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e"}
NFC Smart Card Tag 1k S50 13.56MHz IC Read Write RFID Arduino

$0.06
{"id":4518013337687,"title":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module","handle":"esp8285-esp-m2-wireless-wifi-serial-board-ttl-port-for-wifi-transmission-module","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eTTL-WiFi is designed and developed based on ESP-M2 WiFi module, which is extracted the TTL, EN, STATE and other pins\u003cbr\u003eImportantly, the TTL-WiFi is already built-in the serial transparent transmission firmware programmed by our company (SZdoit), which can realize the transparent transmit the data to the cloud on the real-time, together with low-power control, status indictor\u003cbr\u003eThis board can replace the old wiring serial WiFi device to realize the data collection and control.\u003cbr\u003eFully compatible with the original electrical interface and physical interface for the serial transparent Bluetooth\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eBuilt-in the industrial transparent transmission firmware V3.0 with stability and reliability by using the Web Configuration;\u003cbr\u003eBuilt-in the high performance WiFi module ESP-M2 with size: 34mm17mm4mm\u003cbr\u003eWorking voltage: 4.5V~6.0V, TTL working voltage: 3.3V (compatible with 5.0V)\u003cbr\u003eProvided pins: STATE, TXD, RXD,EN\u003cbr\u003eAverage current: 80mA; when data sent, it is 170mA; but it is 20¦ÌA at deep sleep mode;\u003cbr\u003eSupport serial AT command\u003cbr\u003eSupport re-programmable, OTA firmware update\u003cbr\u003eSeamless transparent transmission between serial and WiFi\u003cbr\u003eBuilt-in HTTP Web Server, support configure parameters by web page\u003cbr\u003eSupport re-connect automatically at WiFi STA mode and TCP Client\u003cbr\u003eSupport set baud rate, data bit, parity check, stop bits, and\/or subcontracting time;\u003cbr\u003eSupport baud rate (bps): 300\/600\/1200\/2400\/4800\/9600\/19200\/38400\/57600\/74800\/115200\/\u003cbr\u003e230400\/460800\/921600\/1843200\/3686400\u003cbr\u003eSupport AP enable, self-defined SSID\/password, self-defined IP and network duration;\u003cbr\u003eAutomatically scan the peripheral WiFi hotspot, support STA enable, DHCP, self-defined IP;\u003cbr\u003eSupport TCP Server, TCP Client, UDP Server, UDP Client and UDP local broadcast;\u003cbr\u003eSupport DNS resolution automatically for the remote sever address\u003cbr\u003eSupport checking the status by AT command\u003cbr\u003eProvide IO4 to show the WiFi status\u003cbr\u003eWorking temperature: -40 Degrees Celsius-125 Degrees Celsius\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cbr\u003esmart home, wireless data connection and transparent transmission, smart car control, wireless serial printer, LED light industrial control etc.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP8285 ESP-M2 WIFI Serial Board\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","published_at":"2020-05-20T02:38:02+08:00","created_at":"2020-05-20T02:38:04+08:00","vendor":"DIYTECH","type":"WIFI Module","tags":["Wireless"],"price":936,"price_min":936,"price_max":2778,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179539312727,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3882-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module - 3pcs","public_title":"3pcs","options":["3pcs"],"price":936,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179539345495,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3882-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module - 10pcs","public_title":"10pcs","options":["10pcs"],"price":2778,"weight":120,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843","options":["Batch"],"media":[{"alt":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module","id":6257384882263,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eTTL-WiFi is designed and developed based on ESP-M2 WiFi module, which is extracted the TTL, EN, STATE and other pins\u003cbr\u003eImportantly, the TTL-WiFi is already built-in the serial transparent transmission firmware programmed by our company (SZdoit), which can realize the transparent transmit the data to the cloud on the real-time, together with low-power control, status indictor\u003cbr\u003eThis board can replace the old wiring serial WiFi device to realize the data collection and control.\u003cbr\u003eFully compatible with the original electrical interface and physical interface for the serial transparent Bluetooth\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eBuilt-in the industrial transparent transmission firmware V3.0 with stability and reliability by using the Web Configuration;\u003cbr\u003eBuilt-in the high performance WiFi module ESP-M2 with size: 34mm17mm4mm\u003cbr\u003eWorking voltage: 4.5V~6.0V, TTL working voltage: 3.3V (compatible with 5.0V)\u003cbr\u003eProvided pins: STATE, TXD, RXD,EN\u003cbr\u003eAverage current: 80mA; when data sent, it is 170mA; but it is 20¦ÌA at deep sleep mode;\u003cbr\u003eSupport serial AT command\u003cbr\u003eSupport re-programmable, OTA firmware update\u003cbr\u003eSeamless transparent transmission between serial and WiFi\u003cbr\u003eBuilt-in HTTP Web Server, support configure parameters by web page\u003cbr\u003eSupport re-connect automatically at WiFi STA mode and TCP Client\u003cbr\u003eSupport set baud rate, data bit, parity check, stop bits, and\/or subcontracting time;\u003cbr\u003eSupport baud rate (bps): 300\/600\/1200\/2400\/4800\/9600\/19200\/38400\/57600\/74800\/115200\/\u003cbr\u003e230400\/460800\/921600\/1843200\/3686400\u003cbr\u003eSupport AP enable, self-defined SSID\/password, self-defined IP and network duration;\u003cbr\u003eAutomatically scan the peripheral WiFi hotspot, support STA enable, DHCP, self-defined IP;\u003cbr\u003eSupport TCP Server, TCP Client, UDP Server, UDP Client and UDP local broadcast;\u003cbr\u003eSupport DNS resolution automatically for the remote sever address\u003cbr\u003eSupport checking the status by AT command\u003cbr\u003eProvide IO4 to show the WiFi status\u003cbr\u003eWorking temperature: -40 Degrees Celsius-125 Degrees Celsius\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cbr\u003esmart home, wireless data connection and transparent transmission, smart car control, wireless serial printer, LED light industrial control etc.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP8285 ESP-M2 WIFI Serial Board\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e"}
USB Female Port Connector Breakout Board Power 2.54mm Header for Arduino

$0.09
{"id":4518013337687,"title":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module","handle":"esp8285-esp-m2-wireless-wifi-serial-board-ttl-port-for-wifi-transmission-module","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eTTL-WiFi is designed and developed based on ESP-M2 WiFi module, which is extracted the TTL, EN, STATE and other pins\u003cbr\u003eImportantly, the TTL-WiFi is already built-in the serial transparent transmission firmware programmed by our company (SZdoit), which can realize the transparent transmit the data to the cloud on the real-time, together with low-power control, status indictor\u003cbr\u003eThis board can replace the old wiring serial WiFi device to realize the data collection and control.\u003cbr\u003eFully compatible with the original electrical interface and physical interface for the serial transparent Bluetooth\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eBuilt-in the industrial transparent transmission firmware V3.0 with stability and reliability by using the Web Configuration;\u003cbr\u003eBuilt-in the high performance WiFi module ESP-M2 with size: 34mm17mm4mm\u003cbr\u003eWorking voltage: 4.5V~6.0V, TTL working voltage: 3.3V (compatible with 5.0V)\u003cbr\u003eProvided pins: STATE, TXD, RXD,EN\u003cbr\u003eAverage current: 80mA; when data sent, it is 170mA; but it is 20¦ÌA at deep sleep mode;\u003cbr\u003eSupport serial AT command\u003cbr\u003eSupport re-programmable, OTA firmware update\u003cbr\u003eSeamless transparent transmission between serial and WiFi\u003cbr\u003eBuilt-in HTTP Web Server, support configure parameters by web page\u003cbr\u003eSupport re-connect automatically at WiFi STA mode and TCP Client\u003cbr\u003eSupport set baud rate, data bit, parity check, stop bits, and\/or subcontracting time;\u003cbr\u003eSupport baud rate (bps): 300\/600\/1200\/2400\/4800\/9600\/19200\/38400\/57600\/74800\/115200\/\u003cbr\u003e230400\/460800\/921600\/1843200\/3686400\u003cbr\u003eSupport AP enable, self-defined SSID\/password, self-defined IP and network duration;\u003cbr\u003eAutomatically scan the peripheral WiFi hotspot, support STA enable, DHCP, self-defined IP;\u003cbr\u003eSupport TCP Server, TCP Client, UDP Server, UDP Client and UDP local broadcast;\u003cbr\u003eSupport DNS resolution automatically for the remote sever address\u003cbr\u003eSupport checking the status by AT command\u003cbr\u003eProvide IO4 to show the WiFi status\u003cbr\u003eWorking temperature: -40 Degrees Celsius-125 Degrees Celsius\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cbr\u003esmart home, wireless data connection and transparent transmission, smart car control, wireless serial printer, LED light industrial control etc.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP8285 ESP-M2 WIFI Serial Board\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","published_at":"2020-05-20T02:38:02+08:00","created_at":"2020-05-20T02:38:04+08:00","vendor":"DIYTECH","type":"WIFI Module","tags":["Wireless"],"price":936,"price_min":936,"price_max":2778,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179539312727,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3882-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module - 3pcs","public_title":"3pcs","options":["3pcs"],"price":936,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179539345495,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3882-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module - 10pcs","public_title":"10pcs","options":["10pcs"],"price":2778,"weight":120,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843","options":["Batch"],"media":[{"alt":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module","id":6257384882263,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eTTL-WiFi is designed and developed based on ESP-M2 WiFi module, which is extracted the TTL, EN, STATE and other pins\u003cbr\u003eImportantly, the TTL-WiFi is already built-in the serial transparent transmission firmware programmed by our company (SZdoit), which can realize the transparent transmit the data to the cloud on the real-time, together with low-power control, status indictor\u003cbr\u003eThis board can replace the old wiring serial WiFi device to realize the data collection and control.\u003cbr\u003eFully compatible with the original electrical interface and physical interface for the serial transparent Bluetooth\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eBuilt-in the industrial transparent transmission firmware V3.0 with stability and reliability by using the Web Configuration;\u003cbr\u003eBuilt-in the high performance WiFi module ESP-M2 with size: 34mm17mm4mm\u003cbr\u003eWorking voltage: 4.5V~6.0V, TTL working voltage: 3.3V (compatible with 5.0V)\u003cbr\u003eProvided pins: STATE, TXD, RXD,EN\u003cbr\u003eAverage current: 80mA; when data sent, it is 170mA; but it is 20¦ÌA at deep sleep mode;\u003cbr\u003eSupport serial AT command\u003cbr\u003eSupport re-programmable, OTA firmware update\u003cbr\u003eSeamless transparent transmission between serial and WiFi\u003cbr\u003eBuilt-in HTTP Web Server, support configure parameters by web page\u003cbr\u003eSupport re-connect automatically at WiFi STA mode and TCP Client\u003cbr\u003eSupport set baud rate, data bit, parity check, stop bits, and\/or subcontracting time;\u003cbr\u003eSupport baud rate (bps): 300\/600\/1200\/2400\/4800\/9600\/19200\/38400\/57600\/74800\/115200\/\u003cbr\u003e230400\/460800\/921600\/1843200\/3686400\u003cbr\u003eSupport AP enable, self-defined SSID\/password, self-defined IP and network duration;\u003cbr\u003eAutomatically scan the peripheral WiFi hotspot, support STA enable, DHCP, self-defined IP;\u003cbr\u003eSupport TCP Server, TCP Client, UDP Server, UDP Client and UDP local broadcast;\u003cbr\u003eSupport DNS resolution automatically for the remote sever address\u003cbr\u003eSupport checking the status by AT command\u003cbr\u003eProvide IO4 to show the WiFi status\u003cbr\u003eWorking temperature: -40 Degrees Celsius-125 Degrees Celsius\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cbr\u003esmart home, wireless data connection and transparent transmission, smart car control, wireless serial printer, LED light industrial control etc.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP8285 ESP-M2 WIFI Serial Board\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e"}
100PCS Carbon Film Resistor 5% 1/4W 0.25W 1R 1M Ohm 1K 2.2K 4.7K 5.1K 6.8K 10K 15K Resistance 1% +1% 1% Diy Electronic

$0.11
{"id":4518013337687,"title":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module","handle":"esp8285-esp-m2-wireless-wifi-serial-board-ttl-port-for-wifi-transmission-module","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eTTL-WiFi is designed and developed based on ESP-M2 WiFi module, which is extracted the TTL, EN, STATE and other pins\u003cbr\u003eImportantly, the TTL-WiFi is already built-in the serial transparent transmission firmware programmed by our company (SZdoit), which can realize the transparent transmit the data to the cloud on the real-time, together with low-power control, status indictor\u003cbr\u003eThis board can replace the old wiring serial WiFi device to realize the data collection and control.\u003cbr\u003eFully compatible with the original electrical interface and physical interface for the serial transparent Bluetooth\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eBuilt-in the industrial transparent transmission firmware V3.0 with stability and reliability by using the Web Configuration;\u003cbr\u003eBuilt-in the high performance WiFi module ESP-M2 with size: 34mm17mm4mm\u003cbr\u003eWorking voltage: 4.5V~6.0V, TTL working voltage: 3.3V (compatible with 5.0V)\u003cbr\u003eProvided pins: STATE, TXD, RXD,EN\u003cbr\u003eAverage current: 80mA; when data sent, it is 170mA; but it is 20¦ÌA at deep sleep mode;\u003cbr\u003eSupport serial AT command\u003cbr\u003eSupport re-programmable, OTA firmware update\u003cbr\u003eSeamless transparent transmission between serial and WiFi\u003cbr\u003eBuilt-in HTTP Web Server, support configure parameters by web page\u003cbr\u003eSupport re-connect automatically at WiFi STA mode and TCP Client\u003cbr\u003eSupport set baud rate, data bit, parity check, stop bits, and\/or subcontracting time;\u003cbr\u003eSupport baud rate (bps): 300\/600\/1200\/2400\/4800\/9600\/19200\/38400\/57600\/74800\/115200\/\u003cbr\u003e230400\/460800\/921600\/1843200\/3686400\u003cbr\u003eSupport AP enable, self-defined SSID\/password, self-defined IP and network duration;\u003cbr\u003eAutomatically scan the peripheral WiFi hotspot, support STA enable, DHCP, self-defined IP;\u003cbr\u003eSupport TCP Server, TCP Client, UDP Server, UDP Client and UDP local broadcast;\u003cbr\u003eSupport DNS resolution automatically for the remote sever address\u003cbr\u003eSupport checking the status by AT command\u003cbr\u003eProvide IO4 to show the WiFi status\u003cbr\u003eWorking temperature: -40 Degrees Celsius-125 Degrees Celsius\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cbr\u003esmart home, wireless data connection and transparent transmission, smart car control, wireless serial printer, LED light industrial control etc.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP8285 ESP-M2 WIFI Serial Board\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","published_at":"2020-05-20T02:38:02+08:00","created_at":"2020-05-20T02:38:04+08:00","vendor":"DIYTECH","type":"WIFI Module","tags":["Wireless"],"price":936,"price_min":936,"price_max":2778,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179539312727,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3882-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module - 3pcs","public_title":"3pcs","options":["3pcs"],"price":936,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179539345495,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3882-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module - 10pcs","public_title":"10pcs","options":["10pcs"],"price":2778,"weight":120,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843","options":["Batch"],"media":[{"alt":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module","id":6257384882263,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eTTL-WiFi is designed and developed based on ESP-M2 WiFi module, which is extracted the TTL, EN, STATE and other pins\u003cbr\u003eImportantly, the TTL-WiFi is already built-in the serial transparent transmission firmware programmed by our company (SZdoit), which can realize the transparent transmit the data to the cloud on the real-time, together with low-power control, status indictor\u003cbr\u003eThis board can replace the old wiring serial WiFi device to realize the data collection and control.\u003cbr\u003eFully compatible with the original electrical interface and physical interface for the serial transparent Bluetooth\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eBuilt-in the industrial transparent transmission firmware V3.0 with stability and reliability by using the Web Configuration;\u003cbr\u003eBuilt-in the high performance WiFi module ESP-M2 with size: 34mm17mm4mm\u003cbr\u003eWorking voltage: 4.5V~6.0V, TTL working voltage: 3.3V (compatible with 5.0V)\u003cbr\u003eProvided pins: STATE, TXD, RXD,EN\u003cbr\u003eAverage current: 80mA; when data sent, it is 170mA; but it is 20¦ÌA at deep sleep mode;\u003cbr\u003eSupport serial AT command\u003cbr\u003eSupport re-programmable, OTA firmware update\u003cbr\u003eSeamless transparent transmission between serial and WiFi\u003cbr\u003eBuilt-in HTTP Web Server, support configure parameters by web page\u003cbr\u003eSupport re-connect automatically at WiFi STA mode and TCP Client\u003cbr\u003eSupport set baud rate, data bit, parity check, stop bits, and\/or subcontracting time;\u003cbr\u003eSupport baud rate (bps): 300\/600\/1200\/2400\/4800\/9600\/19200\/38400\/57600\/74800\/115200\/\u003cbr\u003e230400\/460800\/921600\/1843200\/3686400\u003cbr\u003eSupport AP enable, self-defined SSID\/password, self-defined IP and network duration;\u003cbr\u003eAutomatically scan the peripheral WiFi hotspot, support STA enable, DHCP, self-defined IP;\u003cbr\u003eSupport TCP Server, TCP Client, UDP Server, UDP Client and UDP local broadcast;\u003cbr\u003eSupport DNS resolution automatically for the remote sever address\u003cbr\u003eSupport checking the status by AT command\u003cbr\u003eProvide IO4 to show the WiFi status\u003cbr\u003eWorking temperature: -40 Degrees Celsius-125 Degrees Celsius\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cbr\u003esmart home, wireless data connection and transparent transmission, smart car control, wireless serial printer, LED light industrial control etc.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP8285 ESP-M2 WIFI Serial Board\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e"}
3-6V DC 0.35-0.4A R130 motor Type 130 Hobby micro motors 8000 RPM UK CF

$0.11
{"id":4518013337687,"title":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module","handle":"esp8285-esp-m2-wireless-wifi-serial-board-ttl-port-for-wifi-transmission-module","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eTTL-WiFi is designed and developed based on ESP-M2 WiFi module, which is extracted the TTL, EN, STATE and other pins\u003cbr\u003eImportantly, the TTL-WiFi is already built-in the serial transparent transmission firmware programmed by our company (SZdoit), which can realize the transparent transmit the data to the cloud on the real-time, together with low-power control, status indictor\u003cbr\u003eThis board can replace the old wiring serial WiFi device to realize the data collection and control.\u003cbr\u003eFully compatible with the original electrical interface and physical interface for the serial transparent Bluetooth\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eBuilt-in the industrial transparent transmission firmware V3.0 with stability and reliability by using the Web Configuration;\u003cbr\u003eBuilt-in the high performance WiFi module ESP-M2 with size: 34mm17mm4mm\u003cbr\u003eWorking voltage: 4.5V~6.0V, TTL working voltage: 3.3V (compatible with 5.0V)\u003cbr\u003eProvided pins: STATE, TXD, RXD,EN\u003cbr\u003eAverage current: 80mA; when data sent, it is 170mA; but it is 20¦ÌA at deep sleep mode;\u003cbr\u003eSupport serial AT command\u003cbr\u003eSupport re-programmable, OTA firmware update\u003cbr\u003eSeamless transparent transmission between serial and WiFi\u003cbr\u003eBuilt-in HTTP Web Server, support configure parameters by web page\u003cbr\u003eSupport re-connect automatically at WiFi STA mode and TCP Client\u003cbr\u003eSupport set baud rate, data bit, parity check, stop bits, and\/or subcontracting time;\u003cbr\u003eSupport baud rate (bps): 300\/600\/1200\/2400\/4800\/9600\/19200\/38400\/57600\/74800\/115200\/\u003cbr\u003e230400\/460800\/921600\/1843200\/3686400\u003cbr\u003eSupport AP enable, self-defined SSID\/password, self-defined IP and network duration;\u003cbr\u003eAutomatically scan the peripheral WiFi hotspot, support STA enable, DHCP, self-defined IP;\u003cbr\u003eSupport TCP Server, TCP Client, UDP Server, UDP Client and UDP local broadcast;\u003cbr\u003eSupport DNS resolution automatically for the remote sever address\u003cbr\u003eSupport checking the status by AT command\u003cbr\u003eProvide IO4 to show the WiFi status\u003cbr\u003eWorking temperature: -40 Degrees Celsius-125 Degrees Celsius\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cbr\u003esmart home, wireless data connection and transparent transmission, smart car control, wireless serial printer, LED light industrial control etc.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP8285 ESP-M2 WIFI Serial Board\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","published_at":"2020-05-20T02:38:02+08:00","created_at":"2020-05-20T02:38:04+08:00","vendor":"DIYTECH","type":"WIFI Module","tags":["Wireless"],"price":936,"price_min":936,"price_max":2778,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179539312727,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3882-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module - 3pcs","public_title":"3pcs","options":["3pcs"],"price":936,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179539345495,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3882-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module - 10pcs","public_title":"10pcs","options":["10pcs"],"price":2778,"weight":120,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843","options":["Batch"],"media":[{"alt":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module","id":6257384882263,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eTTL-WiFi is designed and developed based on ESP-M2 WiFi module, which is extracted the TTL, EN, STATE and other pins\u003cbr\u003eImportantly, the TTL-WiFi is already built-in the serial transparent transmission firmware programmed by our company (SZdoit), which can realize the transparent transmit the data to the cloud on the real-time, together with low-power control, status indictor\u003cbr\u003eThis board can replace the old wiring serial WiFi device to realize the data collection and control.\u003cbr\u003eFully compatible with the original electrical interface and physical interface for the serial transparent Bluetooth\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eBuilt-in the industrial transparent transmission firmware V3.0 with stability and reliability by using the Web Configuration;\u003cbr\u003eBuilt-in the high performance WiFi module ESP-M2 with size: 34mm17mm4mm\u003cbr\u003eWorking voltage: 4.5V~6.0V, TTL working voltage: 3.3V (compatible with 5.0V)\u003cbr\u003eProvided pins: STATE, TXD, RXD,EN\u003cbr\u003eAverage current: 80mA; when data sent, it is 170mA; but it is 20¦ÌA at deep sleep mode;\u003cbr\u003eSupport serial AT command\u003cbr\u003eSupport re-programmable, OTA firmware update\u003cbr\u003eSeamless transparent transmission between serial and WiFi\u003cbr\u003eBuilt-in HTTP Web Server, support configure parameters by web page\u003cbr\u003eSupport re-connect automatically at WiFi STA mode and TCP Client\u003cbr\u003eSupport set baud rate, data bit, parity check, stop bits, and\/or subcontracting time;\u003cbr\u003eSupport baud rate (bps): 300\/600\/1200\/2400\/4800\/9600\/19200\/38400\/57600\/74800\/115200\/\u003cbr\u003e230400\/460800\/921600\/1843200\/3686400\u003cbr\u003eSupport AP enable, self-defined SSID\/password, self-defined IP and network duration;\u003cbr\u003eAutomatically scan the peripheral WiFi hotspot, support STA enable, DHCP, self-defined IP;\u003cbr\u003eSupport TCP Server, TCP Client, UDP Server, UDP Client and UDP local broadcast;\u003cbr\u003eSupport DNS resolution automatically for the remote sever address\u003cbr\u003eSupport checking the status by AT command\u003cbr\u003eProvide IO4 to show the WiFi status\u003cbr\u003eWorking temperature: -40 Degrees Celsius-125 Degrees Celsius\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cbr\u003esmart home, wireless data connection and transparent transmission, smart car control, wireless serial printer, LED light industrial control etc.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP8285 ESP-M2 WIFI Serial Board\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e"}
6.0V-12V to 5V AMS1117-5.0V Power Supply Module AMS1117-5.0

$0.11
{"id":4518013337687,"title":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module","handle":"esp8285-esp-m2-wireless-wifi-serial-board-ttl-port-for-wifi-transmission-module","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eTTL-WiFi is designed and developed based on ESP-M2 WiFi module, which is extracted the TTL, EN, STATE and other pins\u003cbr\u003eImportantly, the TTL-WiFi is already built-in the serial transparent transmission firmware programmed by our company (SZdoit), which can realize the transparent transmit the data to the cloud on the real-time, together with low-power control, status indictor\u003cbr\u003eThis board can replace the old wiring serial WiFi device to realize the data collection and control.\u003cbr\u003eFully compatible with the original electrical interface and physical interface for the serial transparent Bluetooth\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eBuilt-in the industrial transparent transmission firmware V3.0 with stability and reliability by using the Web Configuration;\u003cbr\u003eBuilt-in the high performance WiFi module ESP-M2 with size: 34mm17mm4mm\u003cbr\u003eWorking voltage: 4.5V~6.0V, TTL working voltage: 3.3V (compatible with 5.0V)\u003cbr\u003eProvided pins: STATE, TXD, RXD,EN\u003cbr\u003eAverage current: 80mA; when data sent, it is 170mA; but it is 20¦ÌA at deep sleep mode;\u003cbr\u003eSupport serial AT command\u003cbr\u003eSupport re-programmable, OTA firmware update\u003cbr\u003eSeamless transparent transmission between serial and WiFi\u003cbr\u003eBuilt-in HTTP Web Server, support configure parameters by web page\u003cbr\u003eSupport re-connect automatically at WiFi STA mode and TCP Client\u003cbr\u003eSupport set baud rate, data bit, parity check, stop bits, and\/or subcontracting time;\u003cbr\u003eSupport baud rate (bps): 300\/600\/1200\/2400\/4800\/9600\/19200\/38400\/57600\/74800\/115200\/\u003cbr\u003e230400\/460800\/921600\/1843200\/3686400\u003cbr\u003eSupport AP enable, self-defined SSID\/password, self-defined IP and network duration;\u003cbr\u003eAutomatically scan the peripheral WiFi hotspot, support STA enable, DHCP, self-defined IP;\u003cbr\u003eSupport TCP Server, TCP Client, UDP Server, UDP Client and UDP local broadcast;\u003cbr\u003eSupport DNS resolution automatically for the remote sever address\u003cbr\u003eSupport checking the status by AT command\u003cbr\u003eProvide IO4 to show the WiFi status\u003cbr\u003eWorking temperature: -40 Degrees Celsius-125 Degrees Celsius\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cbr\u003esmart home, wireless data connection and transparent transmission, smart car control, wireless serial printer, LED light industrial control etc.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP8285 ESP-M2 WIFI Serial Board\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","published_at":"2020-05-20T02:38:02+08:00","created_at":"2020-05-20T02:38:04+08:00","vendor":"DIYTECH","type":"WIFI Module","tags":["Wireless"],"price":936,"price_min":936,"price_max":2778,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179539312727,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3882-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module - 3pcs","public_title":"3pcs","options":["3pcs"],"price":936,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179539345495,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3882-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module - 10pcs","public_title":"10pcs","options":["10pcs"],"price":2778,"weight":120,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843","options":["Batch"],"media":[{"alt":"ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module","id":6257384882263,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1524646019_AuIlx.jpg?v=1592419843","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eTTL-WiFi is designed and developed based on ESP-M2 WiFi module, which is extracted the TTL, EN, STATE and other pins\u003cbr\u003eImportantly, the TTL-WiFi is already built-in the serial transparent transmission firmware programmed by our company (SZdoit), which can realize the transparent transmit the data to the cloud on the real-time, together with low-power control, status indictor\u003cbr\u003eThis board can replace the old wiring serial WiFi device to realize the data collection and control.\u003cbr\u003eFully compatible with the original electrical interface and physical interface for the serial transparent Bluetooth\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eBuilt-in the industrial transparent transmission firmware V3.0 with stability and reliability by using the Web Configuration;\u003cbr\u003eBuilt-in the high performance WiFi module ESP-M2 with size: 34mm17mm4mm\u003cbr\u003eWorking voltage: 4.5V~6.0V, TTL working voltage: 3.3V (compatible with 5.0V)\u003cbr\u003eProvided pins: STATE, TXD, RXD,EN\u003cbr\u003eAverage current: 80mA; when data sent, it is 170mA; but it is 20¦ÌA at deep sleep mode;\u003cbr\u003eSupport serial AT command\u003cbr\u003eSupport re-programmable, OTA firmware update\u003cbr\u003eSeamless transparent transmission between serial and WiFi\u003cbr\u003eBuilt-in HTTP Web Server, support configure parameters by web page\u003cbr\u003eSupport re-connect automatically at WiFi STA mode and TCP Client\u003cbr\u003eSupport set baud rate, data bit, parity check, stop bits, and\/or subcontracting time;\u003cbr\u003eSupport baud rate (bps): 300\/600\/1200\/2400\/4800\/9600\/19200\/38400\/57600\/74800\/115200\/\u003cbr\u003e230400\/460800\/921600\/1843200\/3686400\u003cbr\u003eSupport AP enable, self-defined SSID\/password, self-defined IP and network duration;\u003cbr\u003eAutomatically scan the peripheral WiFi hotspot, support STA enable, DHCP, self-defined IP;\u003cbr\u003eSupport TCP Server, TCP Client, UDP Server, UDP Client and UDP local broadcast;\u003cbr\u003eSupport DNS resolution automatically for the remote sever address\u003cbr\u003eSupport checking the status by AT command\u003cbr\u003eProvide IO4 to show the WiFi status\u003cbr\u003eWorking temperature: -40 Degrees Celsius-125 Degrees Celsius\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cbr\u003esmart home, wireless data connection and transparent transmission, smart car control, wireless serial printer, LED light industrial control etc.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP8285 ESP-M2 WIFI Serial Board\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e"}

Compare Box
Images
Name
Price
Vendor
Type
Variant
Available
Remove
Detail

ESP8285 ESP-M2 Wireless WIFI Serial Board TTL Port for WIFI Transmission Module

Login

Reset your password

Register