EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino

brand: DIYTECH SKU:DT430-03

$3.66

Overview:

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).
EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.
The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!
EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min/max adjustment.
This is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.

Note: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.

Features:

A3967 microstepping driver
MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)
Compatible with 4, 6, and 8 wire stepper motors of any voltage
Adjustable current control from 150mA/phase to 750mA/phase
Power supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds

Package Included:
1*EasyDriver Stepper Motor Driver V44 A3967

Batch

3pcs 10pcs

Quantity

guaranteeQuality checked
Special gift cardsSpecial gift cards
Free return Within 60 days
Consultancyservice@diytech.cc

Description

Overview:

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).
EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.
The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!
EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min/max adjustment.
This is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.

Note: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.

Features:

A3967 microstepping driver
MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)
Compatible with 4, 6, and 8 wire stepper motors of any voltage
Adjustable current control from 150mA/phase to 750mA/phase
Power supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds

Package Included:
1*EasyDriver Stepper Motor Driver V44 A3967

Manual

Other Customers also buy:

10pcs WH148 Potentiometer Knobs 6mm dia Shaft Hole control knobs caps

$0.06
{"id":4518039289943,"title":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","handle":"easydriver-shield-stepping-stepper-motor-driver-v44-a3967-for-arduino","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967","published_at":"2020-05-20T02:52:12+08:00","created_at":"2020-05-20T02:52:14+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino","Shield"],"price":366,"price_min":366,"price_max":1086,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179559628887,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT430-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":366,"weight":21,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179559661655,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT430-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1086,"weight":70,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997","options":["Batch"],"media":[{"alt":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","id":6257463820375,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967"}
NFC Smart Card Tag 1k S50 13.56MHz IC Read Write RFID Arduino

$0.06
{"id":4518039289943,"title":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","handle":"easydriver-shield-stepping-stepper-motor-driver-v44-a3967-for-arduino","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967","published_at":"2020-05-20T02:52:12+08:00","created_at":"2020-05-20T02:52:14+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino","Shield"],"price":366,"price_min":366,"price_max":1086,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179559628887,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT430-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":366,"weight":21,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179559661655,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT430-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1086,"weight":70,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997","options":["Batch"],"media":[{"alt":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","id":6257463820375,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967"}
USB Female Port Connector Breakout Board Power 2.54mm Header for Arduino

$0.09
{"id":4518039289943,"title":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","handle":"easydriver-shield-stepping-stepper-motor-driver-v44-a3967-for-arduino","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967","published_at":"2020-05-20T02:52:12+08:00","created_at":"2020-05-20T02:52:14+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino","Shield"],"price":366,"price_min":366,"price_max":1086,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179559628887,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT430-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":366,"weight":21,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179559661655,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT430-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1086,"weight":70,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997","options":["Batch"],"media":[{"alt":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","id":6257463820375,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967"}
100PCS Carbon Film Resistor 5% 1/4W 0.25W 1R 1M Ohm 1K 2.2K 4.7K 5.1K 6.8K 10K 15K Resistance 1% +1% 1% Diy Electronic

$0.11
{"id":4518039289943,"title":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","handle":"easydriver-shield-stepping-stepper-motor-driver-v44-a3967-for-arduino","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967","published_at":"2020-05-20T02:52:12+08:00","created_at":"2020-05-20T02:52:14+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino","Shield"],"price":366,"price_min":366,"price_max":1086,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179559628887,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT430-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":366,"weight":21,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179559661655,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT430-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1086,"weight":70,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997","options":["Batch"],"media":[{"alt":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","id":6257463820375,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967"}
3-6V DC 0.35-0.4A R130 motor Type 130 Hobby micro motors 8000 RPM UK CF

$0.11
{"id":4518039289943,"title":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","handle":"easydriver-shield-stepping-stepper-motor-driver-v44-a3967-for-arduino","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967","published_at":"2020-05-20T02:52:12+08:00","created_at":"2020-05-20T02:52:14+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino","Shield"],"price":366,"price_min":366,"price_max":1086,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179559628887,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT430-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":366,"weight":21,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179559661655,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT430-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1086,"weight":70,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997","options":["Batch"],"media":[{"alt":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","id":6257463820375,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967"}
6.0V-12V to 5V AMS1117-5.0V Power Supply Module AMS1117-5.0

$0.11
{"id":4518039289943,"title":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","handle":"easydriver-shield-stepping-stepper-motor-driver-v44-a3967-for-arduino","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967","published_at":"2020-05-20T02:52:12+08:00","created_at":"2020-05-20T02:52:14+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino","Shield"],"price":366,"price_min":366,"price_max":1086,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179559628887,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT430-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":366,"weight":21,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179559661655,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT430-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1086,"weight":70,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997","options":["Batch"],"media":[{"alt":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","id":6257463820375,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495433671_6276.jpg?v=1592419997","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967"}

Compare Box
Images
Name
Price
Vendor
Type
Variant
Available
Remove
Detail

EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino

Login

Reset your password

Register