DC5.5 12V M328 LCD 12864 Transistor Tester DIY Kit Diode Triode Capacitance LCR Meter kit

DC5.5 12V M328 LCD 12864 Transistor Tester DIY Kit Diode Triode Capacitance LCR Meter kit

brand: DIYTECH SKU:DT7690
Regular price $10.99

Features:

Digital 12864 LCD display, easy to read.
Can be powered by a 9V battery(not included).
Automatically detect NPN and PNP transistors, N-channel and P-channel MOSFET, JFETs, diodes, inductors, resistors, capacitors, thyristors, or other devices.
Support 2 resistors measurement, also support potentiometer measurement.
Automatically test the pins of a component and show it on the display.
Measure the gate threshold voltage and gate capacitance of the MOSFET.
Measure bipolar transistor current amplification factor and base-emitter threshold voltage.
Short detection time: only 2 seconds. It costs more time for bulk capacitor detection.
Can be used as a signal generator and frequency meter. Different built-in square signals from 1Hz-2Mhz are available to choose from. It can generate 1-99% PWM(pulse width modulation) signals.

Specifications:

Display: 12864
Voltage: DC5.5-12V
Current: 24mA
Power Supply: 9V Battery(not included)
Resistance Measurement: Max.50MΩ
Resistance Resolution: 0.1Ω
Capacitance Measurement: 25pF~100mF
Capacitance Resolution: 1pF
Inductance Measurement: 0.01MH~20H
Screen Size: 5 * 3.5cm / 2 * 1.4in
PCB Size: 7.5 * 6cm / 3 * 2.4in
Package Weight: 66g

How to use:

1. Resistor welding. If you are not familiar with the chromatic circles, please check the resistance with a multimeter.
2. Other components welding. Please make sure the transistor type and direction are correct.
3. Connect with power supply(9V battery or 5.5V-12V external DC power supply) instead of connecting with M328 and the LCD. Then measure the voltage between pin 7 and pin 22 with a multimeter. If the voltage is +5V, it means the meter is working in normal condition.
4. Cut off the power supply, connect with M328 and the LCD. When all installation finished, connect with the power supply.

Note:
1. The testing picture is just for reference, please in kind prevail.
2. Due to manual measurement, there is some error in the size.

Package included:
1 × M328 LCD Transistor Tester DIY Kit
 
trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancyservice@diytech.cc
Features:

Digital 12864 LCD display, easy to read.
Can be powered by a 9V battery(not included).
Automatically detect NPN and PNP transistors, N-channel and P-channel MOSFET, JFETs, diodes, inductors, resistors, capacitors, thyristors, or other devices.
Support 2 resistors measurement, also support potentiometer measurement.
Automatically test the pins of a component and show it on the display.
Measure the gate threshold voltage and gate capacitance of the MOSFET.
Measure bipolar transistor current amplification factor and base-emitter threshold voltage.
Short detection time: only 2 seconds. It costs more time for bulk capacitor detection.
Can be used as a signal generator and frequency meter. Different built-in square signals from 1Hz-2Mhz are available to choose from. It can generate 1-99% PWM(pulse width modulation) signals.

Specifications:

Display: 12864
Voltage: DC5.5-12V
Current: 24mA
Power Supply: 9V Battery(not included)
Resistance Measurement: Max.50MΩ
Resistance Resolution: 0.1Ω
Capacitance Measurement: 25pF~100mF
Capacitance Resolution: 1pF
Inductance Measurement: 0.01MH~20H
Screen Size: 5 * 3.5cm / 2 * 1.4in
PCB Size: 7.5 * 6cm / 3 * 2.4in
Package Weight: 66g

How to use:

1. Resistor welding. If you are not familiar with the chromatic circles, please check the resistance with a multimeter.
2. Other components welding. Please make sure the transistor type and direction are correct.
3. Connect with power supply(9V battery or 5.5V-12V external DC power supply) instead of connecting with M328 and the LCD. Then measure the voltage between pin 7 and pin 22 with a multimeter. If the voltage is +5V, it means the meter is working in normal condition.
4. Cut off the power supply, connect with M328 and the LCD. When all installation finished, connect with the power supply.

Note:
1. The testing picture is just for reference, please in kind prevail.
2. Due to manual measurement, there is some error in the size.

Package included:
1 × M328 LCD Transistor Tester DIY Kit