AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3

brand: DIYTECH SKU:DT3750-03

$6.67

Description:
This is a programmer expansion shield that allows your Arduino board to modify the fuse bits and burn bootloader into external chip and other Arduino boards.
On-board buzzer and LED indicators, indicating whether the burning is successful, it is convenient for Arduino board designers to batch burning. According to OPEN-SMART user manual, it is very easy to use.

Features:

Compatibility: As it uses SPI pins of ICSP interface, compatible with Arduino UNO R3 / Arduino Mega2560, can change to the bootloader burner when it is directly plugged onto the two boards.
Operating voltage: 5V
Operating current: 500mA (max)
Arduino board to be burned: support Arduino UNO R3 / Mega2560 / Nano / pro mini (5V 16M)
On-board buzzer, if the fuse bit is successfully modified, it will sound once, and then if burning bootloader is OK, it will sound once again. If it is not two beeps, burning is failed. You can capture the sound instead of LED lights, so this will improve the efficiency of burning.
On-board LED indicators, HEART BEAT led lights up like a breathing light when powered normally. During programming, the PROG indicator flashes until it finishes. If the programming is unsuccessful, the ERROR indicator (red) will light.
Onboard 28P locking seat for Atmega328P, Atmega168P, Atmega8 bootloader burning
Onboard ISP_6PIN interface, for the external Arduino board bootloader burning
On-board ISP_10PIN interface
On-board FT232RL and CH340G USB to TTL programmer interface for uploading code to the chip on the 28P locking seat.

Package Included:
1 X AVR ISP Shield Burning Bootloader

Batch

3pcs 10pcs

Quantity

guaranteeQuality checked
Special gift cardsSpecial gift cards
Free return Within 60 days
Consultancyservice@diytech.cc

Description

Compatibility: As it uses SPI pins of ICSP interface, compatible with Arduino UNO R3 / Arduino Mega2560, can change to the bootloader burner when it is directly plugged onto the two boards.
Operating voltage: 5V
Operating current: 500mA (max)
Arduino board to be burned: support Arduino UNO R3 / Mega2560 / Nano / pro mini (5V 16M)
On-board buzzer, if the fuse bit is successfully modified, it will sound once, and then if burning bootloader is OK, it will sound once again. If it is not two beeps, burning is failed. You can capture the sound instead of LED lights, so this will improve the efficiency of burning.
On-board LED indicators, HEART BEAT led lights up like a breathing light when powered normally. During programming, the PROG indicator flashes until it finishes. If the programming is unsuccessful, the ERROR indicator (red) will light.
Onboard 28P locking seat for Atmega328P, Atmega168P, Atmega8 bootloader burning
Onboard ISP_6PIN interface, for the external Arduino board bootloader burning
On-board ISP_10PIN interface
On-board FT232RL and CH340G USB to TTL programmer interface for uploading code to the chip on the 28P locking seat.

Package Included:
1 X AVR ISP Shield Burning Bootloader

Manual

Other Customers also buy:

10pcs WH148 Potentiometer Knobs 6mm dia Shaft Hole control knobs caps

$0.06
{"id":4518021464151,"title":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3","handle":"avr-isp-shield-burning-burn-bootloader-programmer-for-arduino-uno-r3","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThis is a programmer expansion shield that allows your Arduino board to modify the fuse bits and burn bootloader into external chip and other Arduino boards.\u003cbr\u003eOn-board buzzer and LED indicators, indicating whether the burning is successful, it is convenient for Arduino board designers to batch burning. According to OPEN-SMART user manual, it is very easy to use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: As it uses SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560, can change to the bootloader burner when it is directly plugged onto the two boards.\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V\u003c\/li\u003e\n\u003cli\u003eOperating current: 500mA (max)\u003c\/li\u003e\n\u003cli\u003eArduino board to be burned: support Arduino UNO R3 \/ Mega2560 \/ Nano \/ pro mini (5V 16M)\u003c\/li\u003e\n\u003cli\u003eOn-board buzzer, if the fuse bit is successfully modified, it will sound once, and then if burning bootloader is OK, it will sound once again. If it is not two beeps, burning is failed. You can capture the sound instead of LED lights, so this will improve the efficiency of burning.\u003c\/li\u003e\n\u003cli\u003eOn-board LED indicators, HEART BEAT led lights up like a breathing light when powered normally. During programming, the PROG indicator flashes until it finishes. If the programming is unsuccessful, the ERROR indicator (red) will light.\u003c\/li\u003e\n\u003cli\u003eOnboard 28P locking seat for Atmega328P, Atmega168P, Atmega8 bootloader burning\u003c\/li\u003e\n\u003cli\u003eOnboard ISP_6PIN interface, for the external Arduino board bootloader burning\u003c\/li\u003e\n\u003cli\u003eOn-board ISP_10PIN interface\u003c\/li\u003e\n\u003cli\u003eOn-board FT232RL and CH340G USB to TTL programmer interface for uploading code to the chip on the 28P locking seat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 X AVR ISP Shield Burning Bootloader","published_at":"2020-05-20T02:43:03+08:00","created_at":"2020-05-20T02:43:05+08:00","vendor":"DIYTECH","type":"Programmer module","tags":["Arduino","For Arduino","Nano","Shield","UNO R3"],"price":667,"price_min":667,"price_max":1978,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179542556759,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3750-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3 - 3pcs","public_title":"3pcs","options":["3pcs"],"price":667,"weight":111,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179542589527,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3750-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3 - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1978,"weight":370,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867","options":["Batch"],"media":[{"alt":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3","id":6257412014167,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThis is a programmer expansion shield that allows your Arduino board to modify the fuse bits and burn bootloader into external chip and other Arduino boards.\u003cbr\u003eOn-board buzzer and LED indicators, indicating whether the burning is successful, it is convenient for Arduino board designers to batch burning. According to OPEN-SMART user manual, it is very easy to use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: As it uses SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560, can change to the bootloader burner when it is directly plugged onto the two boards.\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V\u003c\/li\u003e\n\u003cli\u003eOperating current: 500mA (max)\u003c\/li\u003e\n\u003cli\u003eArduino board to be burned: support Arduino UNO R3 \/ Mega2560 \/ Nano \/ pro mini (5V 16M)\u003c\/li\u003e\n\u003cli\u003eOn-board buzzer, if the fuse bit is successfully modified, it will sound once, and then if burning bootloader is OK, it will sound once again. If it is not two beeps, burning is failed. You can capture the sound instead of LED lights, so this will improve the efficiency of burning.\u003c\/li\u003e\n\u003cli\u003eOn-board LED indicators, HEART BEAT led lights up like a breathing light when powered normally. During programming, the PROG indicator flashes until it finishes. If the programming is unsuccessful, the ERROR indicator (red) will light.\u003c\/li\u003e\n\u003cli\u003eOnboard 28P locking seat for Atmega328P, Atmega168P, Atmega8 bootloader burning\u003c\/li\u003e\n\u003cli\u003eOnboard ISP_6PIN interface, for the external Arduino board bootloader burning\u003c\/li\u003e\n\u003cli\u003eOn-board ISP_10PIN interface\u003c\/li\u003e\n\u003cli\u003eOn-board FT232RL and CH340G USB to TTL programmer interface for uploading code to the chip on the 28P locking seat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 X AVR ISP Shield Burning Bootloader"}
NFC Smart Card Tag 1k S50 13.56MHz IC Read Write RFID Arduino

$0.06
{"id":4518021464151,"title":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3","handle":"avr-isp-shield-burning-burn-bootloader-programmer-for-arduino-uno-r3","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThis is a programmer expansion shield that allows your Arduino board to modify the fuse bits and burn bootloader into external chip and other Arduino boards.\u003cbr\u003eOn-board buzzer and LED indicators, indicating whether the burning is successful, it is convenient for Arduino board designers to batch burning. According to OPEN-SMART user manual, it is very easy to use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: As it uses SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560, can change to the bootloader burner when it is directly plugged onto the two boards.\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V\u003c\/li\u003e\n\u003cli\u003eOperating current: 500mA (max)\u003c\/li\u003e\n\u003cli\u003eArduino board to be burned: support Arduino UNO R3 \/ Mega2560 \/ Nano \/ pro mini (5V 16M)\u003c\/li\u003e\n\u003cli\u003eOn-board buzzer, if the fuse bit is successfully modified, it will sound once, and then if burning bootloader is OK, it will sound once again. If it is not two beeps, burning is failed. You can capture the sound instead of LED lights, so this will improve the efficiency of burning.\u003c\/li\u003e\n\u003cli\u003eOn-board LED indicators, HEART BEAT led lights up like a breathing light when powered normally. During programming, the PROG indicator flashes until it finishes. If the programming is unsuccessful, the ERROR indicator (red) will light.\u003c\/li\u003e\n\u003cli\u003eOnboard 28P locking seat for Atmega328P, Atmega168P, Atmega8 bootloader burning\u003c\/li\u003e\n\u003cli\u003eOnboard ISP_6PIN interface, for the external Arduino board bootloader burning\u003c\/li\u003e\n\u003cli\u003eOn-board ISP_10PIN interface\u003c\/li\u003e\n\u003cli\u003eOn-board FT232RL and CH340G USB to TTL programmer interface for uploading code to the chip on the 28P locking seat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 X AVR ISP Shield Burning Bootloader","published_at":"2020-05-20T02:43:03+08:00","created_at":"2020-05-20T02:43:05+08:00","vendor":"DIYTECH","type":"Programmer module","tags":["Arduino","For Arduino","Nano","Shield","UNO R3"],"price":667,"price_min":667,"price_max":1978,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179542556759,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3750-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3 - 3pcs","public_title":"3pcs","options":["3pcs"],"price":667,"weight":111,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179542589527,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3750-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3 - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1978,"weight":370,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867","options":["Batch"],"media":[{"alt":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3","id":6257412014167,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThis is a programmer expansion shield that allows your Arduino board to modify the fuse bits and burn bootloader into external chip and other Arduino boards.\u003cbr\u003eOn-board buzzer and LED indicators, indicating whether the burning is successful, it is convenient for Arduino board designers to batch burning. According to OPEN-SMART user manual, it is very easy to use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: As it uses SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560, can change to the bootloader burner when it is directly plugged onto the two boards.\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V\u003c\/li\u003e\n\u003cli\u003eOperating current: 500mA (max)\u003c\/li\u003e\n\u003cli\u003eArduino board to be burned: support Arduino UNO R3 \/ Mega2560 \/ Nano \/ pro mini (5V 16M)\u003c\/li\u003e\n\u003cli\u003eOn-board buzzer, if the fuse bit is successfully modified, it will sound once, and then if burning bootloader is OK, it will sound once again. If it is not two beeps, burning is failed. You can capture the sound instead of LED lights, so this will improve the efficiency of burning.\u003c\/li\u003e\n\u003cli\u003eOn-board LED indicators, HEART BEAT led lights up like a breathing light when powered normally. During programming, the PROG indicator flashes until it finishes. If the programming is unsuccessful, the ERROR indicator (red) will light.\u003c\/li\u003e\n\u003cli\u003eOnboard 28P locking seat for Atmega328P, Atmega168P, Atmega8 bootloader burning\u003c\/li\u003e\n\u003cli\u003eOnboard ISP_6PIN interface, for the external Arduino board bootloader burning\u003c\/li\u003e\n\u003cli\u003eOn-board ISP_10PIN interface\u003c\/li\u003e\n\u003cli\u003eOn-board FT232RL and CH340G USB to TTL programmer interface for uploading code to the chip on the 28P locking seat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 X AVR ISP Shield Burning Bootloader"}
USB Female Port Connector Breakout Board Power 2.54mm Header for Arduino

$0.09
{"id":4518021464151,"title":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3","handle":"avr-isp-shield-burning-burn-bootloader-programmer-for-arduino-uno-r3","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThis is a programmer expansion shield that allows your Arduino board to modify the fuse bits and burn bootloader into external chip and other Arduino boards.\u003cbr\u003eOn-board buzzer and LED indicators, indicating whether the burning is successful, it is convenient for Arduino board designers to batch burning. According to OPEN-SMART user manual, it is very easy to use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: As it uses SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560, can change to the bootloader burner when it is directly plugged onto the two boards.\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V\u003c\/li\u003e\n\u003cli\u003eOperating current: 500mA (max)\u003c\/li\u003e\n\u003cli\u003eArduino board to be burned: support Arduino UNO R3 \/ Mega2560 \/ Nano \/ pro mini (5V 16M)\u003c\/li\u003e\n\u003cli\u003eOn-board buzzer, if the fuse bit is successfully modified, it will sound once, and then if burning bootloader is OK, it will sound once again. If it is not two beeps, burning is failed. You can capture the sound instead of LED lights, so this will improve the efficiency of burning.\u003c\/li\u003e\n\u003cli\u003eOn-board LED indicators, HEART BEAT led lights up like a breathing light when powered normally. During programming, the PROG indicator flashes until it finishes. If the programming is unsuccessful, the ERROR indicator (red) will light.\u003c\/li\u003e\n\u003cli\u003eOnboard 28P locking seat for Atmega328P, Atmega168P, Atmega8 bootloader burning\u003c\/li\u003e\n\u003cli\u003eOnboard ISP_6PIN interface, for the external Arduino board bootloader burning\u003c\/li\u003e\n\u003cli\u003eOn-board ISP_10PIN interface\u003c\/li\u003e\n\u003cli\u003eOn-board FT232RL and CH340G USB to TTL programmer interface for uploading code to the chip on the 28P locking seat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 X AVR ISP Shield Burning Bootloader","published_at":"2020-05-20T02:43:03+08:00","created_at":"2020-05-20T02:43:05+08:00","vendor":"DIYTECH","type":"Programmer module","tags":["Arduino","For Arduino","Nano","Shield","UNO R3"],"price":667,"price_min":667,"price_max":1978,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179542556759,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3750-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3 - 3pcs","public_title":"3pcs","options":["3pcs"],"price":667,"weight":111,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179542589527,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3750-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3 - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1978,"weight":370,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867","options":["Batch"],"media":[{"alt":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3","id":6257412014167,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThis is a programmer expansion shield that allows your Arduino board to modify the fuse bits and burn bootloader into external chip and other Arduino boards.\u003cbr\u003eOn-board buzzer and LED indicators, indicating whether the burning is successful, it is convenient for Arduino board designers to batch burning. According to OPEN-SMART user manual, it is very easy to use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: As it uses SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560, can change to the bootloader burner when it is directly plugged onto the two boards.\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V\u003c\/li\u003e\n\u003cli\u003eOperating current: 500mA (max)\u003c\/li\u003e\n\u003cli\u003eArduino board to be burned: support Arduino UNO R3 \/ Mega2560 \/ Nano \/ pro mini (5V 16M)\u003c\/li\u003e\n\u003cli\u003eOn-board buzzer, if the fuse bit is successfully modified, it will sound once, and then if burning bootloader is OK, it will sound once again. If it is not two beeps, burning is failed. You can capture the sound instead of LED lights, so this will improve the efficiency of burning.\u003c\/li\u003e\n\u003cli\u003eOn-board LED indicators, HEART BEAT led lights up like a breathing light when powered normally. During programming, the PROG indicator flashes until it finishes. If the programming is unsuccessful, the ERROR indicator (red) will light.\u003c\/li\u003e\n\u003cli\u003eOnboard 28P locking seat for Atmega328P, Atmega168P, Atmega8 bootloader burning\u003c\/li\u003e\n\u003cli\u003eOnboard ISP_6PIN interface, for the external Arduino board bootloader burning\u003c\/li\u003e\n\u003cli\u003eOn-board ISP_10PIN interface\u003c\/li\u003e\n\u003cli\u003eOn-board FT232RL and CH340G USB to TTL programmer interface for uploading code to the chip on the 28P locking seat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 X AVR ISP Shield Burning Bootloader"}
100PCS Carbon Film Resistor 5% 1/4W 0.25W 1R 1M Ohm 1K 2.2K 4.7K 5.1K 6.8K 10K 15K Resistance 1% +1% 1% Diy Electronic

$0.11
{"id":4518021464151,"title":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3","handle":"avr-isp-shield-burning-burn-bootloader-programmer-for-arduino-uno-r3","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThis is a programmer expansion shield that allows your Arduino board to modify the fuse bits and burn bootloader into external chip and other Arduino boards.\u003cbr\u003eOn-board buzzer and LED indicators, indicating whether the burning is successful, it is convenient for Arduino board designers to batch burning. According to OPEN-SMART user manual, it is very easy to use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: As it uses SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560, can change to the bootloader burner when it is directly plugged onto the two boards.\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V\u003c\/li\u003e\n\u003cli\u003eOperating current: 500mA (max)\u003c\/li\u003e\n\u003cli\u003eArduino board to be burned: support Arduino UNO R3 \/ Mega2560 \/ Nano \/ pro mini (5V 16M)\u003c\/li\u003e\n\u003cli\u003eOn-board buzzer, if the fuse bit is successfully modified, it will sound once, and then if burning bootloader is OK, it will sound once again. If it is not two beeps, burning is failed. You can capture the sound instead of LED lights, so this will improve the efficiency of burning.\u003c\/li\u003e\n\u003cli\u003eOn-board LED indicators, HEART BEAT led lights up like a breathing light when powered normally. During programming, the PROG indicator flashes until it finishes. If the programming is unsuccessful, the ERROR indicator (red) will light.\u003c\/li\u003e\n\u003cli\u003eOnboard 28P locking seat for Atmega328P, Atmega168P, Atmega8 bootloader burning\u003c\/li\u003e\n\u003cli\u003eOnboard ISP_6PIN interface, for the external Arduino board bootloader burning\u003c\/li\u003e\n\u003cli\u003eOn-board ISP_10PIN interface\u003c\/li\u003e\n\u003cli\u003eOn-board FT232RL and CH340G USB to TTL programmer interface for uploading code to the chip on the 28P locking seat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 X AVR ISP Shield Burning Bootloader","published_at":"2020-05-20T02:43:03+08:00","created_at":"2020-05-20T02:43:05+08:00","vendor":"DIYTECH","type":"Programmer module","tags":["Arduino","For Arduino","Nano","Shield","UNO R3"],"price":667,"price_min":667,"price_max":1978,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179542556759,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3750-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3 - 3pcs","public_title":"3pcs","options":["3pcs"],"price":667,"weight":111,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179542589527,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3750-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3 - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1978,"weight":370,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867","options":["Batch"],"media":[{"alt":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3","id":6257412014167,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThis is a programmer expansion shield that allows your Arduino board to modify the fuse bits and burn bootloader into external chip and other Arduino boards.\u003cbr\u003eOn-board buzzer and LED indicators, indicating whether the burning is successful, it is convenient for Arduino board designers to batch burning. According to OPEN-SMART user manual, it is very easy to use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: As it uses SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560, can change to the bootloader burner when it is directly plugged onto the two boards.\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V\u003c\/li\u003e\n\u003cli\u003eOperating current: 500mA (max)\u003c\/li\u003e\n\u003cli\u003eArduino board to be burned: support Arduino UNO R3 \/ Mega2560 \/ Nano \/ pro mini (5V 16M)\u003c\/li\u003e\n\u003cli\u003eOn-board buzzer, if the fuse bit is successfully modified, it will sound once, and then if burning bootloader is OK, it will sound once again. If it is not two beeps, burning is failed. You can capture the sound instead of LED lights, so this will improve the efficiency of burning.\u003c\/li\u003e\n\u003cli\u003eOn-board LED indicators, HEART BEAT led lights up like a breathing light when powered normally. During programming, the PROG indicator flashes until it finishes. If the programming is unsuccessful, the ERROR indicator (red) will light.\u003c\/li\u003e\n\u003cli\u003eOnboard 28P locking seat for Atmega328P, Atmega168P, Atmega8 bootloader burning\u003c\/li\u003e\n\u003cli\u003eOnboard ISP_6PIN interface, for the external Arduino board bootloader burning\u003c\/li\u003e\n\u003cli\u003eOn-board ISP_10PIN interface\u003c\/li\u003e\n\u003cli\u003eOn-board FT232RL and CH340G USB to TTL programmer interface for uploading code to the chip on the 28P locking seat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 X AVR ISP Shield Burning Bootloader"}
3-6V DC 0.35-0.4A R130 motor Type 130 Hobby micro motors 8000 RPM UK CF

$0.11
{"id":4518021464151,"title":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3","handle":"avr-isp-shield-burning-burn-bootloader-programmer-for-arduino-uno-r3","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThis is a programmer expansion shield that allows your Arduino board to modify the fuse bits and burn bootloader into external chip and other Arduino boards.\u003cbr\u003eOn-board buzzer and LED indicators, indicating whether the burning is successful, it is convenient for Arduino board designers to batch burning. According to OPEN-SMART user manual, it is very easy to use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: As it uses SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560, can change to the bootloader burner when it is directly plugged onto the two boards.\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V\u003c\/li\u003e\n\u003cli\u003eOperating current: 500mA (max)\u003c\/li\u003e\n\u003cli\u003eArduino board to be burned: support Arduino UNO R3 \/ Mega2560 \/ Nano \/ pro mini (5V 16M)\u003c\/li\u003e\n\u003cli\u003eOn-board buzzer, if the fuse bit is successfully modified, it will sound once, and then if burning bootloader is OK, it will sound once again. If it is not two beeps, burning is failed. You can capture the sound instead of LED lights, so this will improve the efficiency of burning.\u003c\/li\u003e\n\u003cli\u003eOn-board LED indicators, HEART BEAT led lights up like a breathing light when powered normally. During programming, the PROG indicator flashes until it finishes. If the programming is unsuccessful, the ERROR indicator (red) will light.\u003c\/li\u003e\n\u003cli\u003eOnboard 28P locking seat for Atmega328P, Atmega168P, Atmega8 bootloader burning\u003c\/li\u003e\n\u003cli\u003eOnboard ISP_6PIN interface, for the external Arduino board bootloader burning\u003c\/li\u003e\n\u003cli\u003eOn-board ISP_10PIN interface\u003c\/li\u003e\n\u003cli\u003eOn-board FT232RL and CH340G USB to TTL programmer interface for uploading code to the chip on the 28P locking seat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 X AVR ISP Shield Burning Bootloader","published_at":"2020-05-20T02:43:03+08:00","created_at":"2020-05-20T02:43:05+08:00","vendor":"DIYTECH","type":"Programmer module","tags":["Arduino","For Arduino","Nano","Shield","UNO R3"],"price":667,"price_min":667,"price_max":1978,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179542556759,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3750-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3 - 3pcs","public_title":"3pcs","options":["3pcs"],"price":667,"weight":111,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179542589527,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3750-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3 - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1978,"weight":370,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867","options":["Batch"],"media":[{"alt":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3","id":6257412014167,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThis is a programmer expansion shield that allows your Arduino board to modify the fuse bits and burn bootloader into external chip and other Arduino boards.\u003cbr\u003eOn-board buzzer and LED indicators, indicating whether the burning is successful, it is convenient for Arduino board designers to batch burning. According to OPEN-SMART user manual, it is very easy to use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: As it uses SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560, can change to the bootloader burner when it is directly plugged onto the two boards.\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V\u003c\/li\u003e\n\u003cli\u003eOperating current: 500mA (max)\u003c\/li\u003e\n\u003cli\u003eArduino board to be burned: support Arduino UNO R3 \/ Mega2560 \/ Nano \/ pro mini (5V 16M)\u003c\/li\u003e\n\u003cli\u003eOn-board buzzer, if the fuse bit is successfully modified, it will sound once, and then if burning bootloader is OK, it will sound once again. If it is not two beeps, burning is failed. You can capture the sound instead of LED lights, so this will improve the efficiency of burning.\u003c\/li\u003e\n\u003cli\u003eOn-board LED indicators, HEART BEAT led lights up like a breathing light when powered normally. During programming, the PROG indicator flashes until it finishes. If the programming is unsuccessful, the ERROR indicator (red) will light.\u003c\/li\u003e\n\u003cli\u003eOnboard 28P locking seat for Atmega328P, Atmega168P, Atmega8 bootloader burning\u003c\/li\u003e\n\u003cli\u003eOnboard ISP_6PIN interface, for the external Arduino board bootloader burning\u003c\/li\u003e\n\u003cli\u003eOn-board ISP_10PIN interface\u003c\/li\u003e\n\u003cli\u003eOn-board FT232RL and CH340G USB to TTL programmer interface for uploading code to the chip on the 28P locking seat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 X AVR ISP Shield Burning Bootloader"}
6.0V-12V to 5V AMS1117-5.0V Power Supply Module AMS1117-5.0

$0.11
{"id":4518021464151,"title":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3","handle":"avr-isp-shield-burning-burn-bootloader-programmer-for-arduino-uno-r3","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThis is a programmer expansion shield that allows your Arduino board to modify the fuse bits and burn bootloader into external chip and other Arduino boards.\u003cbr\u003eOn-board buzzer and LED indicators, indicating whether the burning is successful, it is convenient for Arduino board designers to batch burning. According to OPEN-SMART user manual, it is very easy to use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: As it uses SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560, can change to the bootloader burner when it is directly plugged onto the two boards.\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V\u003c\/li\u003e\n\u003cli\u003eOperating current: 500mA (max)\u003c\/li\u003e\n\u003cli\u003eArduino board to be burned: support Arduino UNO R3 \/ Mega2560 \/ Nano \/ pro mini (5V 16M)\u003c\/li\u003e\n\u003cli\u003eOn-board buzzer, if the fuse bit is successfully modified, it will sound once, and then if burning bootloader is OK, it will sound once again. If it is not two beeps, burning is failed. You can capture the sound instead of LED lights, so this will improve the efficiency of burning.\u003c\/li\u003e\n\u003cli\u003eOn-board LED indicators, HEART BEAT led lights up like a breathing light when powered normally. During programming, the PROG indicator flashes until it finishes. If the programming is unsuccessful, the ERROR indicator (red) will light.\u003c\/li\u003e\n\u003cli\u003eOnboard 28P locking seat for Atmega328P, Atmega168P, Atmega8 bootloader burning\u003c\/li\u003e\n\u003cli\u003eOnboard ISP_6PIN interface, for the external Arduino board bootloader burning\u003c\/li\u003e\n\u003cli\u003eOn-board ISP_10PIN interface\u003c\/li\u003e\n\u003cli\u003eOn-board FT232RL and CH340G USB to TTL programmer interface for uploading code to the chip on the 28P locking seat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 X AVR ISP Shield Burning Bootloader","published_at":"2020-05-20T02:43:03+08:00","created_at":"2020-05-20T02:43:05+08:00","vendor":"DIYTECH","type":"Programmer module","tags":["Arduino","For Arduino","Nano","Shield","UNO R3"],"price":667,"price_min":667,"price_max":1978,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179542556759,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3750-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3 - 3pcs","public_title":"3pcs","options":["3pcs"],"price":667,"weight":111,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179542589527,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3750-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3 - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1978,"weight":370,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867","options":["Batch"],"media":[{"alt":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3","id":6257412014167,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1530083598_KceXx.jpg?v=1592419867","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThis is a programmer expansion shield that allows your Arduino board to modify the fuse bits and burn bootloader into external chip and other Arduino boards.\u003cbr\u003eOn-board buzzer and LED indicators, indicating whether the burning is successful, it is convenient for Arduino board designers to batch burning. According to OPEN-SMART user manual, it is very easy to use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: As it uses SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560, can change to the bootloader burner when it is directly plugged onto the two boards.\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V\u003c\/li\u003e\n\u003cli\u003eOperating current: 500mA (max)\u003c\/li\u003e\n\u003cli\u003eArduino board to be burned: support Arduino UNO R3 \/ Mega2560 \/ Nano \/ pro mini (5V 16M)\u003c\/li\u003e\n\u003cli\u003eOn-board buzzer, if the fuse bit is successfully modified, it will sound once, and then if burning bootloader is OK, it will sound once again. If it is not two beeps, burning is failed. You can capture the sound instead of LED lights, so this will improve the efficiency of burning.\u003c\/li\u003e\n\u003cli\u003eOn-board LED indicators, HEART BEAT led lights up like a breathing light when powered normally. During programming, the PROG indicator flashes until it finishes. If the programming is unsuccessful, the ERROR indicator (red) will light.\u003c\/li\u003e\n\u003cli\u003eOnboard 28P locking seat for Atmega328P, Atmega168P, Atmega8 bootloader burning\u003c\/li\u003e\n\u003cli\u003eOnboard ISP_6PIN interface, for the external Arduino board bootloader burning\u003c\/li\u003e\n\u003cli\u003eOn-board ISP_10PIN interface\u003c\/li\u003e\n\u003cli\u003eOn-board FT232RL and CH340G USB to TTL programmer interface for uploading code to the chip on the 28P locking seat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 X AVR ISP Shield Burning Bootloader"}

Compare Box
Images
Name
Price
Vendor
Type
Variant
Available
Remove
Detail

AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3

Login

Reset your password

Register