DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepSti

DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino

brand: DIYTECH SKU:DT4948-03

$3.29

Features:

Simple step and direction control interface
Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates
45 V maximum supply voltage
Built-in regulator (no external logic voltage supply needed)
Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
Short-to-ground and shorted-load protection
4-layer, 2 oz copper PCB for improved heat dissipation
Exposed solderable ground pad below the driver IC on the bottom of the PCB
Module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)

Package Included:
1 x DRV8825 Module
1 x Heatsink

Batch

3pcs 10pcs

Quantity

guaranteeQuality checked
Special gift cardsSpecial gift cards
Free return Within 60 days
Consultancyservice@diytech.cc

Description

Features:

Simple step and direction control interface
Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates
45 V maximum supply voltage
Built-in regulator (no external logic voltage supply needed)
Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
Short-to-ground and shorted-load protection
4-layer, 2 oz copper PCB for improved heat dissipation
Exposed solderable ground pad below the driver IC on the bottom of the PCB
Module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)

Package Included:
1 x DRV8825 Module
1 x Heatsink

Manual

Other Customers also buy:

10pcs WH148 Potentiometer Knobs 6mm dia Shaft Hole control knobs caps

$0.06
{"id":4518053544023,"title":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","handle":"arduino-drv8825-stepper-motor-driver-module-3d-printer-ramps1-4-reprap-stepstick","description":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink","published_at":"2020-05-20T02:59:16+08:00","created_at":"2020-05-20T02:59:18+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino"],"price":329,"price_min":329,"price_max":975,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179574046807,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT4948-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":329,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179574079575,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT4948-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":975,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","options":["Batch"],"media":[{"alt":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","id":6257501339735,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink"}
NFC Smart Card Tag 1k S50 13.56MHz IC Read Write RFID Arduino

$0.06
{"id":4518053544023,"title":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","handle":"arduino-drv8825-stepper-motor-driver-module-3d-printer-ramps1-4-reprap-stepstick","description":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink","published_at":"2020-05-20T02:59:16+08:00","created_at":"2020-05-20T02:59:18+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino"],"price":329,"price_min":329,"price_max":975,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179574046807,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT4948-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":329,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179574079575,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT4948-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":975,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","options":["Batch"],"media":[{"alt":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","id":6257501339735,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink"}
USB Female Port Connector Breakout Board Power 2.54mm Header for Arduino

$0.09
{"id":4518053544023,"title":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","handle":"arduino-drv8825-stepper-motor-driver-module-3d-printer-ramps1-4-reprap-stepstick","description":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink","published_at":"2020-05-20T02:59:16+08:00","created_at":"2020-05-20T02:59:18+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino"],"price":329,"price_min":329,"price_max":975,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179574046807,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT4948-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":329,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179574079575,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT4948-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":975,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","options":["Batch"],"media":[{"alt":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","id":6257501339735,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink"}
100PCS Carbon Film Resistor 5% 1/4W 0.25W 1R 1M Ohm 1K 2.2K 4.7K 5.1K 6.8K 10K 15K Resistance 1% +1% 1% Diy Electronic

$0.11
{"id":4518053544023,"title":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","handle":"arduino-drv8825-stepper-motor-driver-module-3d-printer-ramps1-4-reprap-stepstick","description":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink","published_at":"2020-05-20T02:59:16+08:00","created_at":"2020-05-20T02:59:18+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino"],"price":329,"price_min":329,"price_max":975,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179574046807,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT4948-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":329,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179574079575,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT4948-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":975,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","options":["Batch"],"media":[{"alt":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","id":6257501339735,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink"}
3-6V DC 0.35-0.4A R130 motor Type 130 Hobby micro motors 8000 RPM UK CF

$0.11
{"id":4518053544023,"title":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","handle":"arduino-drv8825-stepper-motor-driver-module-3d-printer-ramps1-4-reprap-stepstick","description":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink","published_at":"2020-05-20T02:59:16+08:00","created_at":"2020-05-20T02:59:18+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino"],"price":329,"price_min":329,"price_max":975,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179574046807,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT4948-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":329,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179574079575,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT4948-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":975,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","options":["Batch"],"media":[{"alt":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","id":6257501339735,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink"}
6.0V-12V to 5V AMS1117-5.0V Power Supply Module AMS1117-5.0

$0.11
{"id":4518053544023,"title":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","handle":"arduino-drv8825-stepper-motor-driver-module-3d-printer-ramps1-4-reprap-stepstick","description":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink","published_at":"2020-05-20T02:59:16+08:00","created_at":"2020-05-20T02:59:18+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino"],"price":329,"price_min":329,"price_max":975,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179574046807,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT4948-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":329,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179574079575,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT4948-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":975,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","options":["Batch"],"media":[{"alt":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","id":6257501339735,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink"}

Compare Box
Images
Name
Price
Vendor
Type
Variant
Available
Remove
Detail

DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino

Login

Reset your password

Register