84*48 LCD Module White/Blue Backlight Adapter PCB for Nokia 5110 Arduino
84*48 LCD Module White/Blue Backlight Adapter PCB for Nokia 5110 Arduino
brand: DIYTECH SKU:DT4190
Regular price
$2.99
Sale price
$2.02
![]()
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancyservice@diytech.cc
Specification:
1. "LIGHT" linked with GND, the backlight to be lit.
2. Need you to compress the screen and PCB tighter, might got loose after the delivery.
3 Use a 3.3V controller, otherwise the display could be quite vague.
LCD5110 Module:
Power supply voltage:2.7V-3.3V,5V is OK,but part of the screen becomes black when tested
Data interface level:2.7-5V
Backlight power supply voltage:highest 3.3V
Installation diameter:2mm
Backlight:White/Blue
Document for Download:Data
1£®RST--------- reset
2£®CE------------chip selection
3£®DC-----------data/commands choice
4£®DIN-----------serial data line
5£®CLK------------serial Clock Speed
6£®3.3V------------VCC
7£®LIGHT--------- backlight control terminal
8£®GND-----------power negative
Features:
84 X 48 dot matrix LCD,can show 4 lines of characters
Use serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time.
Can use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.
LCD controller/driver chip has been bound to LCD chip,the volume of LCD is small
Low power supply,the working current in normal situation is lower than 200¦ÌA,and has power-down mode.
Shipping Included:
1PCS*Nokia 5110 LCD Disply Module
1. "LIGHT" linked with GND, the backlight to be lit.
2. Need you to compress the screen and PCB tighter, might got loose after the delivery.
3 Use a 3.3V controller, otherwise the display could be quite vague.
LCD5110 Module:
Power supply voltage:2.7V-3.3V,5V is OK,but part of the screen becomes black when tested
Data interface level:2.7-5V
Backlight power supply voltage:highest 3.3V
Installation diameter:2mm
Backlight:White/Blue
Document for Download:Data
1£®RST--------- reset
2£®CE------------chip selection
3£®DC-----------data/commands choice
4£®DIN-----------serial data line
5£®CLK------------serial Clock Speed
6£®3.3V------------VCC
7£®LIGHT--------- backlight control terminal
8£®GND-----------power negative
Features:
84 X 48 dot matrix LCD,can show 4 lines of characters
Use serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time.
Can use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.
LCD controller/driver chip has been bound to LCD chip,the volume of LCD is small
Low power supply,the working current in normal situation is lower than 200¦ÌA,and has power-down mode.
Shipping Included:
1PCS*Nokia 5110 LCD Disply Module
Other Customers also buy:
-
Translation missing: en.products.product.regular_price$0.06 On Sale{"id":4518026936407,"title":"84*48 LCD Module White\/Blue Backlight Adapter PCB for Nokia 5110 Arduino","handle":"84-48-lcd-module-white-blue-backlight-adapter-pcb-for-nokia-5110-arduino","description":"\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. \"LIGHT\" linked with GND, the backlight to be lit.\u003cbr\u003e2. Need you to compress the screen and PCB tighter, might got loose after the delivery.\u003cbr\u003e3 Use a 3.3V controller, otherwise the display could be quite vague.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLCD5110 Module:\u003c\/strong\u003e\u003cbr\u003ePower supply voltage:2.7V-3.3V,5V is OK,but part of the screen becomes black when tested\u003cbr\u003eData interface level:2.7-5V\u003cbr\u003eBacklight power supply voltage:highest 3.3V\u003cbr\u003eInstallation diameter:2mm\u003cbr\u003eBacklight:White\/Blue\u003cbr\u003eDocument for Download:Data\u003cbr\u003e1£®RST--------- reset\u003cbr\u003e2£®CE------------chip selection\u003cbr\u003e3£®DC-----------data\/commands choice\u003cbr\u003e4£®DIN-----------serial data line\u003cbr\u003e5£®CLK------------serial Clock Speed\u003cbr\u003e6£®3.3V------------VCC\u003cbr\u003e7£®LIGHT--------- backlight control terminal\u003cbr\u003e8£®GND-----------power negative\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e84 X 48 dot matrix LCD,can show 4 lines of characters\u003cbr\u003eUse serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time.\u003cbr\u003eCan use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.\u003cbr\u003eLCD controller\/driver chip has been bound to LCD chip,the volume of LCD is small\u003cbr\u003eLow power supply,the working current in normal situation is lower than 200¦ÌA,and has power-down mode.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShipping Included:\u003c\/strong\u003e\u003cbr\u003e1PCS*Nokia 5110 LCD Disply Module","published_at":"2020-05-20T02:45:56+08:00","created_at":"2020-05-20T02:46:01+08:00","vendor":"DIYTECH","type":"LCD","tags":["Arduino","Display","For Arduino"],"price":202,"price_min":202,"price_max":202,"available":true,"price_varies":false,"compare_at_price":299,"compare_at_price_min":299,"compare_at_price_max":299,"compare_at_price_varies":false,"variants":[{"id":32011184832599,"title":"White","option1":"White","option2":null,"option3":null,"sku":"DT4190","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"84*48 LCD Module White\/Blue Backlight Adapter PCB for Nokia 5110 Arduino - White","public_title":"White","options":["White"],"price":202,"weight":15,"compare_at_price":299,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32011184865367,"title":"Blue","option1":"Blue","option2":null,"option3":null,"sku":"DT4189","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"84*48 LCD Module White\/Blue Backlight Adapter PCB for Nokia 5110 Arduino - Blue","public_title":"Blue","options":["Blue"],"price":202,"weight":15,"compare_at_price":299,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961","\/\/diytech.cc\/cdn\/shop\/products\/HTB1CuRpJFXXXXchXVXXq6xXFXXXV.jpg?v=1600426451","\/\/diytech.cc\/cdn\/shop\/products\/HTB1t6NKJFXXXXXLXpXXq6xXFXXXp.jpg?v=1600426451","\/\/diytech.cc\/cdn\/shop\/products\/1495444899_9449.jpg?v=1600426451"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961","options":["Color"],"media":[{"alt":"84*48 Lcd Module White\/blue Backlight Adapter Pcb For Nokia 5110 Arduino Display","id":6257428496471,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961","width":500},{"alt":null,"id":6756336762967,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2481,"width":2481,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1CuRpJFXXXXchXVXXq6xXFXXXV.jpg?v=1600426451"},"aspect_ratio":1.0,"height":2481,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1CuRpJFXXXXchXVXXq6xXFXXXV.jpg?v=1600426451","width":2481},{"alt":null,"id":6756336795735,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1912,"width":1912,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1t6NKJFXXXXXLXpXXq6xXFXXXp.jpg?v=1600426451"},"aspect_ratio":1.0,"height":1912,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1t6NKJFXXXXXLXpXXq6xXFXXXp.jpg?v=1600426451","width":1912},{"alt":"84*48 Lcd Module White\/blue Backlight Adapter Pcb For Nokia 5110 Arduino Display","id":6257428529239,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_9449.jpg?v=1600426451"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_9449.jpg?v=1600426451","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. \"LIGHT\" linked with GND, the backlight to be lit.\u003cbr\u003e2. Need you to compress the screen and PCB tighter, might got loose after the delivery.\u003cbr\u003e3 Use a 3.3V controller, otherwise the display could be quite vague.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLCD5110 Module:\u003c\/strong\u003e\u003cbr\u003ePower supply voltage:2.7V-3.3V,5V is OK,but part of the screen becomes black when tested\u003cbr\u003eData interface level:2.7-5V\u003cbr\u003eBacklight power supply voltage:highest 3.3V\u003cbr\u003eInstallation diameter:2mm\u003cbr\u003eBacklight:White\/Blue\u003cbr\u003eDocument for Download:Data\u003cbr\u003e1£®RST--------- reset\u003cbr\u003e2£®CE------------chip selection\u003cbr\u003e3£®DC-----------data\/commands choice\u003cbr\u003e4£®DIN-----------serial data line\u003cbr\u003e5£®CLK------------serial Clock Speed\u003cbr\u003e6£®3.3V------------VCC\u003cbr\u003e7£®LIGHT--------- backlight control terminal\u003cbr\u003e8£®GND-----------power negative\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e84 X 48 dot matrix LCD,can show 4 lines of characters\u003cbr\u003eUse serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time.\u003cbr\u003eCan use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.\u003cbr\u003eLCD controller\/driver chip has been bound to LCD chip,the volume of LCD is small\u003cbr\u003eLow power supply,the working current in normal situation is lower than 200¦ÌA,and has power-down mode.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShipping Included:\u003c\/strong\u003e\u003cbr\u003e1PCS*Nokia 5110 LCD Disply Module"} -
Translation missing: en.products.product.regular_price$0.06 On Sale{"id":4518026936407,"title":"84*48 LCD Module White\/Blue Backlight Adapter PCB for Nokia 5110 Arduino","handle":"84-48-lcd-module-white-blue-backlight-adapter-pcb-for-nokia-5110-arduino","description":"\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. \"LIGHT\" linked with GND, the backlight to be lit.\u003cbr\u003e2. Need you to compress the screen and PCB tighter, might got loose after the delivery.\u003cbr\u003e3 Use a 3.3V controller, otherwise the display could be quite vague.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLCD5110 Module:\u003c\/strong\u003e\u003cbr\u003ePower supply voltage:2.7V-3.3V,5V is OK,but part of the screen becomes black when tested\u003cbr\u003eData interface level:2.7-5V\u003cbr\u003eBacklight power supply voltage:highest 3.3V\u003cbr\u003eInstallation diameter:2mm\u003cbr\u003eBacklight:White\/Blue\u003cbr\u003eDocument for Download:Data\u003cbr\u003e1£®RST--------- reset\u003cbr\u003e2£®CE------------chip selection\u003cbr\u003e3£®DC-----------data\/commands choice\u003cbr\u003e4£®DIN-----------serial data line\u003cbr\u003e5£®CLK------------serial Clock Speed\u003cbr\u003e6£®3.3V------------VCC\u003cbr\u003e7£®LIGHT--------- backlight control terminal\u003cbr\u003e8£®GND-----------power negative\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e84 X 48 dot matrix LCD,can show 4 lines of characters\u003cbr\u003eUse serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time.\u003cbr\u003eCan use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.\u003cbr\u003eLCD controller\/driver chip has been bound to LCD chip,the volume of LCD is small\u003cbr\u003eLow power supply,the working current in normal situation is lower than 200¦ÌA,and has power-down mode.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShipping Included:\u003c\/strong\u003e\u003cbr\u003e1PCS*Nokia 5110 LCD Disply Module","published_at":"2020-05-20T02:45:56+08:00","created_at":"2020-05-20T02:46:01+08:00","vendor":"DIYTECH","type":"LCD","tags":["Arduino","Display","For Arduino"],"price":202,"price_min":202,"price_max":202,"available":true,"price_varies":false,"compare_at_price":299,"compare_at_price_min":299,"compare_at_price_max":299,"compare_at_price_varies":false,"variants":[{"id":32011184832599,"title":"White","option1":"White","option2":null,"option3":null,"sku":"DT4190","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"84*48 LCD Module White\/Blue Backlight Adapter PCB for Nokia 5110 Arduino - White","public_title":"White","options":["White"],"price":202,"weight":15,"compare_at_price":299,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32011184865367,"title":"Blue","option1":"Blue","option2":null,"option3":null,"sku":"DT4189","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"84*48 LCD Module White\/Blue Backlight Adapter PCB for Nokia 5110 Arduino - Blue","public_title":"Blue","options":["Blue"],"price":202,"weight":15,"compare_at_price":299,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961","\/\/diytech.cc\/cdn\/shop\/products\/HTB1CuRpJFXXXXchXVXXq6xXFXXXV.jpg?v=1600426451","\/\/diytech.cc\/cdn\/shop\/products\/HTB1t6NKJFXXXXXLXpXXq6xXFXXXp.jpg?v=1600426451","\/\/diytech.cc\/cdn\/shop\/products\/1495444899_9449.jpg?v=1600426451"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961","options":["Color"],"media":[{"alt":"84*48 Lcd Module White\/blue Backlight Adapter Pcb For Nokia 5110 Arduino Display","id":6257428496471,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961","width":500},{"alt":null,"id":6756336762967,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2481,"width":2481,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1CuRpJFXXXXchXVXXq6xXFXXXV.jpg?v=1600426451"},"aspect_ratio":1.0,"height":2481,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1CuRpJFXXXXchXVXXq6xXFXXXV.jpg?v=1600426451","width":2481},{"alt":null,"id":6756336795735,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1912,"width":1912,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1t6NKJFXXXXXLXpXXq6xXFXXXp.jpg?v=1600426451"},"aspect_ratio":1.0,"height":1912,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1t6NKJFXXXXXLXpXXq6xXFXXXp.jpg?v=1600426451","width":1912},{"alt":"84*48 Lcd Module White\/blue Backlight Adapter Pcb For Nokia 5110 Arduino Display","id":6257428529239,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_9449.jpg?v=1600426451"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_9449.jpg?v=1600426451","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. \"LIGHT\" linked with GND, the backlight to be lit.\u003cbr\u003e2. Need you to compress the screen and PCB tighter, might got loose after the delivery.\u003cbr\u003e3 Use a 3.3V controller, otherwise the display could be quite vague.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLCD5110 Module:\u003c\/strong\u003e\u003cbr\u003ePower supply voltage:2.7V-3.3V,5V is OK,but part of the screen becomes black when tested\u003cbr\u003eData interface level:2.7-5V\u003cbr\u003eBacklight power supply voltage:highest 3.3V\u003cbr\u003eInstallation diameter:2mm\u003cbr\u003eBacklight:White\/Blue\u003cbr\u003eDocument for Download:Data\u003cbr\u003e1£®RST--------- reset\u003cbr\u003e2£®CE------------chip selection\u003cbr\u003e3£®DC-----------data\/commands choice\u003cbr\u003e4£®DIN-----------serial data line\u003cbr\u003e5£®CLK------------serial Clock Speed\u003cbr\u003e6£®3.3V------------VCC\u003cbr\u003e7£®LIGHT--------- backlight control terminal\u003cbr\u003e8£®GND-----------power negative\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e84 X 48 dot matrix LCD,can show 4 lines of characters\u003cbr\u003eUse serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time.\u003cbr\u003eCan use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.\u003cbr\u003eLCD controller\/driver chip has been bound to LCD chip,the volume of LCD is small\u003cbr\u003eLow power supply,the working current in normal situation is lower than 200¦ÌA,and has power-down mode.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShipping Included:\u003c\/strong\u003e\u003cbr\u003e1PCS*Nokia 5110 LCD Disply Module"} -
Translation missing: en.products.product.regular_price$0.99$0.09 On Sale{"id":4518026936407,"title":"84*48 LCD Module White\/Blue Backlight Adapter PCB for Nokia 5110 Arduino","handle":"84-48-lcd-module-white-blue-backlight-adapter-pcb-for-nokia-5110-arduino","description":"\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. \"LIGHT\" linked with GND, the backlight to be lit.\u003cbr\u003e2. Need you to compress the screen and PCB tighter, might got loose after the delivery.\u003cbr\u003e3 Use a 3.3V controller, otherwise the display could be quite vague.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLCD5110 Module:\u003c\/strong\u003e\u003cbr\u003ePower supply voltage:2.7V-3.3V,5V is OK,but part of the screen becomes black when tested\u003cbr\u003eData interface level:2.7-5V\u003cbr\u003eBacklight power supply voltage:highest 3.3V\u003cbr\u003eInstallation diameter:2mm\u003cbr\u003eBacklight:White\/Blue\u003cbr\u003eDocument for Download:Data\u003cbr\u003e1£®RST--------- reset\u003cbr\u003e2£®CE------------chip selection\u003cbr\u003e3£®DC-----------data\/commands choice\u003cbr\u003e4£®DIN-----------serial data line\u003cbr\u003e5£®CLK------------serial Clock Speed\u003cbr\u003e6£®3.3V------------VCC\u003cbr\u003e7£®LIGHT--------- backlight control terminal\u003cbr\u003e8£®GND-----------power negative\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e84 X 48 dot matrix LCD,can show 4 lines of characters\u003cbr\u003eUse serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time.\u003cbr\u003eCan use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.\u003cbr\u003eLCD controller\/driver chip has been bound to LCD chip,the volume of LCD is small\u003cbr\u003eLow power supply,the working current in normal situation is lower than 200¦ÌA,and has power-down mode.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShipping Included:\u003c\/strong\u003e\u003cbr\u003e1PCS*Nokia 5110 LCD Disply Module","published_at":"2020-05-20T02:45:56+08:00","created_at":"2020-05-20T02:46:01+08:00","vendor":"DIYTECH","type":"LCD","tags":["Arduino","Display","For Arduino"],"price":202,"price_min":202,"price_max":202,"available":true,"price_varies":false,"compare_at_price":299,"compare_at_price_min":299,"compare_at_price_max":299,"compare_at_price_varies":false,"variants":[{"id":32011184832599,"title":"White","option1":"White","option2":null,"option3":null,"sku":"DT4190","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"84*48 LCD Module White\/Blue Backlight Adapter PCB for Nokia 5110 Arduino - White","public_title":"White","options":["White"],"price":202,"weight":15,"compare_at_price":299,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32011184865367,"title":"Blue","option1":"Blue","option2":null,"option3":null,"sku":"DT4189","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"84*48 LCD Module White\/Blue Backlight Adapter PCB for Nokia 5110 Arduino - Blue","public_title":"Blue","options":["Blue"],"price":202,"weight":15,"compare_at_price":299,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961","\/\/diytech.cc\/cdn\/shop\/products\/HTB1CuRpJFXXXXchXVXXq6xXFXXXV.jpg?v=1600426451","\/\/diytech.cc\/cdn\/shop\/products\/HTB1t6NKJFXXXXXLXpXXq6xXFXXXp.jpg?v=1600426451","\/\/diytech.cc\/cdn\/shop\/products\/1495444899_9449.jpg?v=1600426451"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961","options":["Color"],"media":[{"alt":"84*48 Lcd Module White\/blue Backlight Adapter Pcb For Nokia 5110 Arduino Display","id":6257428496471,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961","width":500},{"alt":null,"id":6756336762967,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2481,"width":2481,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1CuRpJFXXXXchXVXXq6xXFXXXV.jpg?v=1600426451"},"aspect_ratio":1.0,"height":2481,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1CuRpJFXXXXchXVXXq6xXFXXXV.jpg?v=1600426451","width":2481},{"alt":null,"id":6756336795735,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1912,"width":1912,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1t6NKJFXXXXXLXpXXq6xXFXXXp.jpg?v=1600426451"},"aspect_ratio":1.0,"height":1912,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1t6NKJFXXXXXLXpXXq6xXFXXXp.jpg?v=1600426451","width":1912},{"alt":"84*48 Lcd Module White\/blue Backlight Adapter Pcb For Nokia 5110 Arduino Display","id":6257428529239,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_9449.jpg?v=1600426451"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_9449.jpg?v=1600426451","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. \"LIGHT\" linked with GND, the backlight to be lit.\u003cbr\u003e2. Need you to compress the screen and PCB tighter, might got loose after the delivery.\u003cbr\u003e3 Use a 3.3V controller, otherwise the display could be quite vague.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLCD5110 Module:\u003c\/strong\u003e\u003cbr\u003ePower supply voltage:2.7V-3.3V,5V is OK,but part of the screen becomes black when tested\u003cbr\u003eData interface level:2.7-5V\u003cbr\u003eBacklight power supply voltage:highest 3.3V\u003cbr\u003eInstallation diameter:2mm\u003cbr\u003eBacklight:White\/Blue\u003cbr\u003eDocument for Download:Data\u003cbr\u003e1£®RST--------- reset\u003cbr\u003e2£®CE------------chip selection\u003cbr\u003e3£®DC-----------data\/commands choice\u003cbr\u003e4£®DIN-----------serial data line\u003cbr\u003e5£®CLK------------serial Clock Speed\u003cbr\u003e6£®3.3V------------VCC\u003cbr\u003e7£®LIGHT--------- backlight control terminal\u003cbr\u003e8£®GND-----------power negative\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e84 X 48 dot matrix LCD,can show 4 lines of characters\u003cbr\u003eUse serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time.\u003cbr\u003eCan use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.\u003cbr\u003eLCD controller\/driver chip has been bound to LCD chip,the volume of LCD is small\u003cbr\u003eLow power supply,the working current in normal situation is lower than 200¦ÌA,and has power-down mode.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShipping Included:\u003c\/strong\u003e\u003cbr\u003e1PCS*Nokia 5110 LCD Disply Module"} -
Translation missing: en.products.product.regular_price$0.50$0.11 On Sale{"id":4518026936407,"title":"84*48 LCD Module White\/Blue Backlight Adapter PCB for Nokia 5110 Arduino","handle":"84-48-lcd-module-white-blue-backlight-adapter-pcb-for-nokia-5110-arduino","description":"\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. \"LIGHT\" linked with GND, the backlight to be lit.\u003cbr\u003e2. Need you to compress the screen and PCB tighter, might got loose after the delivery.\u003cbr\u003e3 Use a 3.3V controller, otherwise the display could be quite vague.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLCD5110 Module:\u003c\/strong\u003e\u003cbr\u003ePower supply voltage:2.7V-3.3V,5V is OK,but part of the screen becomes black when tested\u003cbr\u003eData interface level:2.7-5V\u003cbr\u003eBacklight power supply voltage:highest 3.3V\u003cbr\u003eInstallation diameter:2mm\u003cbr\u003eBacklight:White\/Blue\u003cbr\u003eDocument for Download:Data\u003cbr\u003e1£®RST--------- reset\u003cbr\u003e2£®CE------------chip selection\u003cbr\u003e3£®DC-----------data\/commands choice\u003cbr\u003e4£®DIN-----------serial data line\u003cbr\u003e5£®CLK------------serial Clock Speed\u003cbr\u003e6£®3.3V------------VCC\u003cbr\u003e7£®LIGHT--------- backlight control terminal\u003cbr\u003e8£®GND-----------power negative\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e84 X 48 dot matrix LCD,can show 4 lines of characters\u003cbr\u003eUse serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time.\u003cbr\u003eCan use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.\u003cbr\u003eLCD controller\/driver chip has been bound to LCD chip,the volume of LCD is small\u003cbr\u003eLow power supply,the working current in normal situation is lower than 200¦ÌA,and has power-down mode.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShipping Included:\u003c\/strong\u003e\u003cbr\u003e1PCS*Nokia 5110 LCD Disply Module","published_at":"2020-05-20T02:45:56+08:00","created_at":"2020-05-20T02:46:01+08:00","vendor":"DIYTECH","type":"LCD","tags":["Arduino","Display","For Arduino"],"price":202,"price_min":202,"price_max":202,"available":true,"price_varies":false,"compare_at_price":299,"compare_at_price_min":299,"compare_at_price_max":299,"compare_at_price_varies":false,"variants":[{"id":32011184832599,"title":"White","option1":"White","option2":null,"option3":null,"sku":"DT4190","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"84*48 LCD Module White\/Blue Backlight Adapter PCB for Nokia 5110 Arduino - White","public_title":"White","options":["White"],"price":202,"weight":15,"compare_at_price":299,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32011184865367,"title":"Blue","option1":"Blue","option2":null,"option3":null,"sku":"DT4189","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"84*48 LCD Module White\/Blue Backlight Adapter PCB for Nokia 5110 Arduino - Blue","public_title":"Blue","options":["Blue"],"price":202,"weight":15,"compare_at_price":299,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961","\/\/diytech.cc\/cdn\/shop\/products\/HTB1CuRpJFXXXXchXVXXq6xXFXXXV.jpg?v=1600426451","\/\/diytech.cc\/cdn\/shop\/products\/HTB1t6NKJFXXXXXLXpXXq6xXFXXXp.jpg?v=1600426451","\/\/diytech.cc\/cdn\/shop\/products\/1495444899_9449.jpg?v=1600426451"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961","options":["Color"],"media":[{"alt":"84*48 Lcd Module White\/blue Backlight Adapter Pcb For Nokia 5110 Arduino Display","id":6257428496471,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961","width":500},{"alt":null,"id":6756336762967,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2481,"width":2481,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1CuRpJFXXXXchXVXXq6xXFXXXV.jpg?v=1600426451"},"aspect_ratio":1.0,"height":2481,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1CuRpJFXXXXchXVXXq6xXFXXXV.jpg?v=1600426451","width":2481},{"alt":null,"id":6756336795735,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1912,"width":1912,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1t6NKJFXXXXXLXpXXq6xXFXXXp.jpg?v=1600426451"},"aspect_ratio":1.0,"height":1912,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1t6NKJFXXXXXLXpXXq6xXFXXXp.jpg?v=1600426451","width":1912},{"alt":"84*48 Lcd Module White\/blue Backlight Adapter Pcb For Nokia 5110 Arduino Display","id":6257428529239,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_9449.jpg?v=1600426451"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_9449.jpg?v=1600426451","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. \"LIGHT\" linked with GND, the backlight to be lit.\u003cbr\u003e2. Need you to compress the screen and PCB tighter, might got loose after the delivery.\u003cbr\u003e3 Use a 3.3V controller, otherwise the display could be quite vague.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLCD5110 Module:\u003c\/strong\u003e\u003cbr\u003ePower supply voltage:2.7V-3.3V,5V is OK,but part of the screen becomes black when tested\u003cbr\u003eData interface level:2.7-5V\u003cbr\u003eBacklight power supply voltage:highest 3.3V\u003cbr\u003eInstallation diameter:2mm\u003cbr\u003eBacklight:White\/Blue\u003cbr\u003eDocument for Download:Data\u003cbr\u003e1£®RST--------- reset\u003cbr\u003e2£®CE------------chip selection\u003cbr\u003e3£®DC-----------data\/commands choice\u003cbr\u003e4£®DIN-----------serial data line\u003cbr\u003e5£®CLK------------serial Clock Speed\u003cbr\u003e6£®3.3V------------VCC\u003cbr\u003e7£®LIGHT--------- backlight control terminal\u003cbr\u003e8£®GND-----------power negative\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e84 X 48 dot matrix LCD,can show 4 lines of characters\u003cbr\u003eUse serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time.\u003cbr\u003eCan use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.\u003cbr\u003eLCD controller\/driver chip has been bound to LCD chip,the volume of LCD is small\u003cbr\u003eLow power supply,the working current in normal situation is lower than 200¦ÌA,and has power-down mode.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShipping Included:\u003c\/strong\u003e\u003cbr\u003e1PCS*Nokia 5110 LCD Disply Module"} -
Translation missing: en.products.product.regular_price$0.11 On Sale{"id":4518026936407,"title":"84*48 LCD Module White\/Blue Backlight Adapter PCB for Nokia 5110 Arduino","handle":"84-48-lcd-module-white-blue-backlight-adapter-pcb-for-nokia-5110-arduino","description":"\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. \"LIGHT\" linked with GND, the backlight to be lit.\u003cbr\u003e2. Need you to compress the screen and PCB tighter, might got loose after the delivery.\u003cbr\u003e3 Use a 3.3V controller, otherwise the display could be quite vague.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLCD5110 Module:\u003c\/strong\u003e\u003cbr\u003ePower supply voltage:2.7V-3.3V,5V is OK,but part of the screen becomes black when tested\u003cbr\u003eData interface level:2.7-5V\u003cbr\u003eBacklight power supply voltage:highest 3.3V\u003cbr\u003eInstallation diameter:2mm\u003cbr\u003eBacklight:White\/Blue\u003cbr\u003eDocument for Download:Data\u003cbr\u003e1£®RST--------- reset\u003cbr\u003e2£®CE------------chip selection\u003cbr\u003e3£®DC-----------data\/commands choice\u003cbr\u003e4£®DIN-----------serial data line\u003cbr\u003e5£®CLK------------serial Clock Speed\u003cbr\u003e6£®3.3V------------VCC\u003cbr\u003e7£®LIGHT--------- backlight control terminal\u003cbr\u003e8£®GND-----------power negative\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e84 X 48 dot matrix LCD,can show 4 lines of characters\u003cbr\u003eUse serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time.\u003cbr\u003eCan use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.\u003cbr\u003eLCD controller\/driver chip has been bound to LCD chip,the volume of LCD is small\u003cbr\u003eLow power supply,the working current in normal situation is lower than 200¦ÌA,and has power-down mode.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShipping Included:\u003c\/strong\u003e\u003cbr\u003e1PCS*Nokia 5110 LCD Disply Module","published_at":"2020-05-20T02:45:56+08:00","created_at":"2020-05-20T02:46:01+08:00","vendor":"DIYTECH","type":"LCD","tags":["Arduino","Display","For Arduino"],"price":202,"price_min":202,"price_max":202,"available":true,"price_varies":false,"compare_at_price":299,"compare_at_price_min":299,"compare_at_price_max":299,"compare_at_price_varies":false,"variants":[{"id":32011184832599,"title":"White","option1":"White","option2":null,"option3":null,"sku":"DT4190","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"84*48 LCD Module White\/Blue Backlight Adapter PCB for Nokia 5110 Arduino - White","public_title":"White","options":["White"],"price":202,"weight":15,"compare_at_price":299,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32011184865367,"title":"Blue","option1":"Blue","option2":null,"option3":null,"sku":"DT4189","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"84*48 LCD Module White\/Blue Backlight Adapter PCB for Nokia 5110 Arduino - Blue","public_title":"Blue","options":["Blue"],"price":202,"weight":15,"compare_at_price":299,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961","\/\/diytech.cc\/cdn\/shop\/products\/HTB1CuRpJFXXXXchXVXXq6xXFXXXV.jpg?v=1600426451","\/\/diytech.cc\/cdn\/shop\/products\/HTB1t6NKJFXXXXXLXpXXq6xXFXXXp.jpg?v=1600426451","\/\/diytech.cc\/cdn\/shop\/products\/1495444899_9449.jpg?v=1600426451"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961","options":["Color"],"media":[{"alt":"84*48 Lcd Module White\/blue Backlight Adapter Pcb For Nokia 5110 Arduino Display","id":6257428496471,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961","width":500},{"alt":null,"id":6756336762967,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2481,"width":2481,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1CuRpJFXXXXchXVXXq6xXFXXXV.jpg?v=1600426451"},"aspect_ratio":1.0,"height":2481,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1CuRpJFXXXXchXVXXq6xXFXXXV.jpg?v=1600426451","width":2481},{"alt":null,"id":6756336795735,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1912,"width":1912,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1t6NKJFXXXXXLXpXXq6xXFXXXp.jpg?v=1600426451"},"aspect_ratio":1.0,"height":1912,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1t6NKJFXXXXXLXpXXq6xXFXXXp.jpg?v=1600426451","width":1912},{"alt":"84*48 Lcd Module White\/blue Backlight Adapter Pcb For Nokia 5110 Arduino Display","id":6257428529239,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_9449.jpg?v=1600426451"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_9449.jpg?v=1600426451","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. \"LIGHT\" linked with GND, the backlight to be lit.\u003cbr\u003e2. Need you to compress the screen and PCB tighter, might got loose after the delivery.\u003cbr\u003e3 Use a 3.3V controller, otherwise the display could be quite vague.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLCD5110 Module:\u003c\/strong\u003e\u003cbr\u003ePower supply voltage:2.7V-3.3V,5V is OK,but part of the screen becomes black when tested\u003cbr\u003eData interface level:2.7-5V\u003cbr\u003eBacklight power supply voltage:highest 3.3V\u003cbr\u003eInstallation diameter:2mm\u003cbr\u003eBacklight:White\/Blue\u003cbr\u003eDocument for Download:Data\u003cbr\u003e1£®RST--------- reset\u003cbr\u003e2£®CE------------chip selection\u003cbr\u003e3£®DC-----------data\/commands choice\u003cbr\u003e4£®DIN-----------serial data line\u003cbr\u003e5£®CLK------------serial Clock Speed\u003cbr\u003e6£®3.3V------------VCC\u003cbr\u003e7£®LIGHT--------- backlight control terminal\u003cbr\u003e8£®GND-----------power negative\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e84 X 48 dot matrix LCD,can show 4 lines of characters\u003cbr\u003eUse serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time.\u003cbr\u003eCan use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.\u003cbr\u003eLCD controller\/driver chip has been bound to LCD chip,the volume of LCD is small\u003cbr\u003eLow power supply,the working current in normal situation is lower than 200¦ÌA,and has power-down mode.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShipping Included:\u003c\/strong\u003e\u003cbr\u003e1PCS*Nokia 5110 LCD Disply Module"} -
Translation missing: en.products.product.regular_price$0.11 On Sale{"id":4518026936407,"title":"84*48 LCD Module White\/Blue Backlight Adapter PCB for Nokia 5110 Arduino","handle":"84-48-lcd-module-white-blue-backlight-adapter-pcb-for-nokia-5110-arduino","description":"\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. \"LIGHT\" linked with GND, the backlight to be lit.\u003cbr\u003e2. Need you to compress the screen and PCB tighter, might got loose after the delivery.\u003cbr\u003e3 Use a 3.3V controller, otherwise the display could be quite vague.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLCD5110 Module:\u003c\/strong\u003e\u003cbr\u003ePower supply voltage:2.7V-3.3V,5V is OK,but part of the screen becomes black when tested\u003cbr\u003eData interface level:2.7-5V\u003cbr\u003eBacklight power supply voltage:highest 3.3V\u003cbr\u003eInstallation diameter:2mm\u003cbr\u003eBacklight:White\/Blue\u003cbr\u003eDocument for Download:Data\u003cbr\u003e1£®RST--------- reset\u003cbr\u003e2£®CE------------chip selection\u003cbr\u003e3£®DC-----------data\/commands choice\u003cbr\u003e4£®DIN-----------serial data line\u003cbr\u003e5£®CLK------------serial Clock Speed\u003cbr\u003e6£®3.3V------------VCC\u003cbr\u003e7£®LIGHT--------- backlight control terminal\u003cbr\u003e8£®GND-----------power negative\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e84 X 48 dot matrix LCD,can show 4 lines of characters\u003cbr\u003eUse serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time.\u003cbr\u003eCan use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.\u003cbr\u003eLCD controller\/driver chip has been bound to LCD chip,the volume of LCD is small\u003cbr\u003eLow power supply,the working current in normal situation is lower than 200¦ÌA,and has power-down mode.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShipping Included:\u003c\/strong\u003e\u003cbr\u003e1PCS*Nokia 5110 LCD Disply Module","published_at":"2020-05-20T02:45:56+08:00","created_at":"2020-05-20T02:46:01+08:00","vendor":"DIYTECH","type":"LCD","tags":["Arduino","Display","For Arduino"],"price":202,"price_min":202,"price_max":202,"available":true,"price_varies":false,"compare_at_price":299,"compare_at_price_min":299,"compare_at_price_max":299,"compare_at_price_varies":false,"variants":[{"id":32011184832599,"title":"White","option1":"White","option2":null,"option3":null,"sku":"DT4190","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"84*48 LCD Module White\/Blue Backlight Adapter PCB for Nokia 5110 Arduino - White","public_title":"White","options":["White"],"price":202,"weight":15,"compare_at_price":299,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32011184865367,"title":"Blue","option1":"Blue","option2":null,"option3":null,"sku":"DT4189","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"84*48 LCD Module White\/Blue Backlight Adapter PCB for Nokia 5110 Arduino - Blue","public_title":"Blue","options":["Blue"],"price":202,"weight":15,"compare_at_price":299,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961","\/\/diytech.cc\/cdn\/shop\/products\/HTB1CuRpJFXXXXchXVXXq6xXFXXXV.jpg?v=1600426451","\/\/diytech.cc\/cdn\/shop\/products\/HTB1t6NKJFXXXXXLXpXXq6xXFXXXp.jpg?v=1600426451","\/\/diytech.cc\/cdn\/shop\/products\/1495444899_9449.jpg?v=1600426451"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961","options":["Color"],"media":[{"alt":"84*48 Lcd Module White\/blue Backlight Adapter Pcb For Nokia 5110 Arduino Display","id":6257428496471,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_7215.jpg?v=1589913961","width":500},{"alt":null,"id":6756336762967,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2481,"width":2481,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1CuRpJFXXXXchXVXXq6xXFXXXV.jpg?v=1600426451"},"aspect_ratio":1.0,"height":2481,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1CuRpJFXXXXchXVXXq6xXFXXXV.jpg?v=1600426451","width":2481},{"alt":null,"id":6756336795735,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1912,"width":1912,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1t6NKJFXXXXXLXpXXq6xXFXXXp.jpg?v=1600426451"},"aspect_ratio":1.0,"height":1912,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1t6NKJFXXXXXLXpXXq6xXFXXXp.jpg?v=1600426451","width":1912},{"alt":"84*48 Lcd Module White\/blue Backlight Adapter Pcb For Nokia 5110 Arduino Display","id":6257428529239,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_9449.jpg?v=1600426451"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495444899_9449.jpg?v=1600426451","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. \"LIGHT\" linked with GND, the backlight to be lit.\u003cbr\u003e2. Need you to compress the screen and PCB tighter, might got loose after the delivery.\u003cbr\u003e3 Use a 3.3V controller, otherwise the display could be quite vague.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLCD5110 Module:\u003c\/strong\u003e\u003cbr\u003ePower supply voltage:2.7V-3.3V,5V is OK,but part of the screen becomes black when tested\u003cbr\u003eData interface level:2.7-5V\u003cbr\u003eBacklight power supply voltage:highest 3.3V\u003cbr\u003eInstallation diameter:2mm\u003cbr\u003eBacklight:White\/Blue\u003cbr\u003eDocument for Download:Data\u003cbr\u003e1£®RST--------- reset\u003cbr\u003e2£®CE------------chip selection\u003cbr\u003e3£®DC-----------data\/commands choice\u003cbr\u003e4£®DIN-----------serial data line\u003cbr\u003e5£®CLK------------serial Clock Speed\u003cbr\u003e6£®3.3V------------VCC\u003cbr\u003e7£®LIGHT--------- backlight control terminal\u003cbr\u003e8£®GND-----------power negative\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e84 X 48 dot matrix LCD,can show 4 lines of characters\u003cbr\u003eUse serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time.\u003cbr\u003eCan use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.\u003cbr\u003eLCD controller\/driver chip has been bound to LCD chip,the volume of LCD is small\u003cbr\u003eLow power supply,the working current in normal situation is lower than 200¦ÌA,and has power-down mode.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShipping Included:\u003c\/strong\u003e\u003cbr\u003e1PCS*Nokia 5110 LCD Disply Module"}
