Description£º
1. Increase the supply anti-reversefunction.
2. The use of opto isolated input and output,enhanced anti-jamming capabilit consumption.
3. Set parameter after power for ever memories.
4. Signal terminal voltage signal can be maintained for a longtime.
5. to ensure stability,industrial grade board,class PLC.
?
Parameters:
1. Size:64.2mm*34.8mm*18.5mm.
2. Relay Specifications:AC 220V 10A or DC 30V 10A.
3. Quiescent Current:20mA,Operating Current:50mA.
4. Working voltage:10~16V (if other ranges can be customized).
5. Signal voltage:4V~20V (if other ranges can be customized).
6. life:about100,000times,Working temperature:-40~85'C.
?
Working mode selection:
After power on,long press K12 seconds later into the select function mode, P1-1~P1-4 for choose.

P1-1 operating modes:a signal to trigger relay, time is up, the relay disconnect users,You can set relay time T,click K2 the hundreddigital tube starts flashing,then press K3, the hundred digital change; click K2 ten digital tube starts flashing,then press K3,ten digit changes;click K2 bit digital tube starts flashing, then press K3, single-digit change; then click K2; digital pipe does not blink,then press the K3, shifting the decimalpoint,the decimalpointin abitindicates 0-999minutesin ten represents 0 to 99.9 seconds withou tadecimalpointrepresents 0-999 seconds; goodchoice, bringing the time setting is completed. Short press K1,enterfunction offine-tuning settings, trigger the efault delay period is invalid, press K1, during the delay trigger active(re-timing), click on the K1, during the delay reset (timer turned off,the relay reset) press again to repeat the default settings for the first time.
?
P1-2 operating modes: A signal trigger ,digital countdown begins, X seconds after, there lay open Y seconds, then close. Users can set the relay time X,Y; P1-1different time settings similar to the blue lights that set the relay time,blue light indicates setting relay off time. Short press K1, enter function offine-tuning the set, the default trigger is invalid during the delay, pressK1, during the delay trigger active(re-timing), then click the first repeat default settings.

P1-3 operating modes: Open X seconds, disconnect Yseconds, infinite loop. Users can set the relay timeX, Y; time setting similar to P1-2. Short press K1,enter function offine-tuning set, The default function is: set up an electric circuit the relay first open, press the K1,there lay first close. Press again to repeat the default functionality.
?
P1-4 operating modes: a signal to trigger the relay open but do not start the timer,when the trigger signal disappears, digital count down begins, X time after, the relayclose; During the delay,again to the signal, digital count down canceled, stays energized, the signal disappears, restart count down; (equivalentto release the button to start timing, commonly usedin power-offdelay). Users canset the relay time X; time setting similar to P1-1.

Package Included:
1 x 24V LED Automation Delay Timer Control