10DOF I2C/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi
10DOF I2C/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi
brand: DIYTECH SKU:DT3402-03
Regular price
$7.74
![]()
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancyservice@diytech.cc
Overview:
Features:
Package: 2.5 mm x 2.5 mm x 0.93 mm
Digital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)
Supply voltage VDD main supply voltage range: 1.71 V to 3.6 V
VDDIO interface voltage range: 1.2 V to 3.6 V
Current consumption:
1.8 uA @ 1 Hz humidity and temperature
2.8 uA @ 1 Hz pressure and temperature
3.6 uA @ 1 Hz humidity, pressure and temperature
0.1 uA in sleep mode
Operating range -40¡+85 C, 0¡100 % rel. humidity, 300¡1100 hPa- Humidity sensor and pressure sensor can be independently enabled/disabled
Package Included:
1* BME280 Sensor
- BME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity & Pressure Sensor
- The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm
- Default setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd & Vdd_IO.
- If you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!
Features:
Package: 2.5 mm x 2.5 mm x 0.93 mm
Digital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)
Supply voltage VDD main supply voltage range: 1.71 V to 3.6 V
VDDIO interface voltage range: 1.2 V to 3.6 V
Current consumption:
1.8 uA @ 1 Hz humidity and temperature
2.8 uA @ 1 Hz pressure and temperature
3.6 uA @ 1 Hz humidity, pressure and temperature
0.1 uA in sleep mode
Operating range -40¡+85 C, 0¡100 % rel. humidity, 300¡1100 hPa- Humidity sensor and pressure sensor can be independently enabled/disabled
Package Included:
1* BME280 Sensor
Other Customers also buy:
-
$0.06{"id":4518036570199,"title":"10DOF I2C\/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi","handle":"10dof-i2c-spi-mpu9250-bmp280-gy-91-bme280-kompass-barom-for-arduino-raspberry-pi","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eBME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity \u0026amp; Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eThe board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm\u003c\/li\u003e\n\u003cli\u003eDefault setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd \u0026amp; Vdd_IO.\u003c\/li\u003e\n\u003cli\u003eIf you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003ePackage: 2.5 mm x 2.5 mm x 0.93 mm\u003cbr\u003eDigital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)\u003cbr\u003eSupply voltage VDD main supply voltage range: 1.71 V to 3.6 V\u003cbr\u003eVDDIO interface voltage range: 1.2 V to 3.6 V\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCurrent consumption:\u003c\/strong\u003e\u003cbr\u003e1.8 uA @ 1 Hz humidity and temperature\u003cbr\u003e2.8 uA @ 1 Hz pressure and temperature\u003cbr\u003e3.6 uA @ 1 Hz humidity, pressure and temperature\u003cbr\u003e0.1 uA in sleep mode\u003cbr\u003eOperating range -40¡+85 C, 0¡100 % rel. humidity, 300¡1100 hPa- Humidity sensor and pressure sensor can be independently enabled\/disabled\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1* BME280 Sensor\u003cbr\u003e\u003cimg alt=\"6\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"1\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tPL7Xxk98KJjSZFoq6xS6pXa0.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"2\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1mOSWX_TI8KJjSsphq6AFppXaB.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"3\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB17uy_X6nD8KJjSspbq6zbEXXaU.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"4\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"5\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1TdIOXBbM8KJjSZFFq6yynpXah.jpg\"\u003e\u003cbr\u003e","published_at":"2020-05-20T02:50:32+08:00","created_at":"2020-05-20T02:50:33+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Raspberry Pi"],"price":774,"price_min":774,"price_max":2374,"available":true,"price_varies":true,"compare_at_price":459,"compare_at_price_min":459,"compare_at_price_max":459,"compare_at_price_varies":false,"variants":[{"id":32208968187991,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3402-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"10DOF I2C\/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi - 3pcs","public_title":"3pcs","options":["3pcs"],"price":774,"weight":6,"compare_at_price":459,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32208968220759,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3402-10","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"10DOF I2C\/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi - 10pcs","public_title":"10pcs","options":["10pcs"],"price":2374,"weight":20,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809","\/\/diytech.cc\/cdn\/shop\/products\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg?v=1590661824"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809","options":["Batch"],"media":[{"alt":null,"id":6316897173591,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809","width":800},{"alt":null,"id":6316896223319,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg?v=1590661824"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg?v=1590661824","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eBME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity \u0026amp; Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eThe board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm\u003c\/li\u003e\n\u003cli\u003eDefault setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd \u0026amp; Vdd_IO.\u003c\/li\u003e\n\u003cli\u003eIf you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003ePackage: 2.5 mm x 2.5 mm x 0.93 mm\u003cbr\u003eDigital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)\u003cbr\u003eSupply voltage VDD main supply voltage range: 1.71 V to 3.6 V\u003cbr\u003eVDDIO interface voltage range: 1.2 V to 3.6 V\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCurrent consumption:\u003c\/strong\u003e\u003cbr\u003e1.8 uA @ 1 Hz humidity and temperature\u003cbr\u003e2.8 uA @ 1 Hz pressure and temperature\u003cbr\u003e3.6 uA @ 1 Hz humidity, pressure and temperature\u003cbr\u003e0.1 uA in sleep mode\u003cbr\u003eOperating range -40¡+85 C, 0¡100 % rel. humidity, 300¡1100 hPa- Humidity sensor and pressure sensor can be independently enabled\/disabled\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1* BME280 Sensor\u003cbr\u003e\u003cimg alt=\"6\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"1\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tPL7Xxk98KJjSZFoq6xS6pXa0.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"2\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1mOSWX_TI8KJjSsphq6AFppXaB.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"3\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB17uy_X6nD8KJjSspbq6zbEXXaU.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"4\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"5\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1TdIOXBbM8KJjSZFFq6yynpXah.jpg\"\u003e\u003cbr\u003e"} -
$0.06{"id":4518036570199,"title":"10DOF I2C\/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi","handle":"10dof-i2c-spi-mpu9250-bmp280-gy-91-bme280-kompass-barom-for-arduino-raspberry-pi","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eBME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity \u0026amp; Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eThe board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm\u003c\/li\u003e\n\u003cli\u003eDefault setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd \u0026amp; Vdd_IO.\u003c\/li\u003e\n\u003cli\u003eIf you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003ePackage: 2.5 mm x 2.5 mm x 0.93 mm\u003cbr\u003eDigital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)\u003cbr\u003eSupply voltage VDD main supply voltage range: 1.71 V to 3.6 V\u003cbr\u003eVDDIO interface voltage range: 1.2 V to 3.6 V\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCurrent consumption:\u003c\/strong\u003e\u003cbr\u003e1.8 uA @ 1 Hz humidity and temperature\u003cbr\u003e2.8 uA @ 1 Hz pressure and temperature\u003cbr\u003e3.6 uA @ 1 Hz humidity, pressure and temperature\u003cbr\u003e0.1 uA in sleep mode\u003cbr\u003eOperating range -40¡+85 C, 0¡100 % rel. humidity, 300¡1100 hPa- Humidity sensor and pressure sensor can be independently enabled\/disabled\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1* BME280 Sensor\u003cbr\u003e\u003cimg alt=\"6\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"1\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tPL7Xxk98KJjSZFoq6xS6pXa0.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"2\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1mOSWX_TI8KJjSsphq6AFppXaB.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"3\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB17uy_X6nD8KJjSspbq6zbEXXaU.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"4\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"5\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1TdIOXBbM8KJjSZFFq6yynpXah.jpg\"\u003e\u003cbr\u003e","published_at":"2020-05-20T02:50:32+08:00","created_at":"2020-05-20T02:50:33+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Raspberry Pi"],"price":774,"price_min":774,"price_max":2374,"available":true,"price_varies":true,"compare_at_price":459,"compare_at_price_min":459,"compare_at_price_max":459,"compare_at_price_varies":false,"variants":[{"id":32208968187991,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3402-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"10DOF I2C\/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi - 3pcs","public_title":"3pcs","options":["3pcs"],"price":774,"weight":6,"compare_at_price":459,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32208968220759,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3402-10","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"10DOF I2C\/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi - 10pcs","public_title":"10pcs","options":["10pcs"],"price":2374,"weight":20,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809","\/\/diytech.cc\/cdn\/shop\/products\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg?v=1590661824"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809","options":["Batch"],"media":[{"alt":null,"id":6316897173591,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809","width":800},{"alt":null,"id":6316896223319,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg?v=1590661824"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg?v=1590661824","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eBME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity \u0026amp; Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eThe board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm\u003c\/li\u003e\n\u003cli\u003eDefault setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd \u0026amp; Vdd_IO.\u003c\/li\u003e\n\u003cli\u003eIf you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003ePackage: 2.5 mm x 2.5 mm x 0.93 mm\u003cbr\u003eDigital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)\u003cbr\u003eSupply voltage VDD main supply voltage range: 1.71 V to 3.6 V\u003cbr\u003eVDDIO interface voltage range: 1.2 V to 3.6 V\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCurrent consumption:\u003c\/strong\u003e\u003cbr\u003e1.8 uA @ 1 Hz humidity and temperature\u003cbr\u003e2.8 uA @ 1 Hz pressure and temperature\u003cbr\u003e3.6 uA @ 1 Hz humidity, pressure and temperature\u003cbr\u003e0.1 uA in sleep mode\u003cbr\u003eOperating range -40¡+85 C, 0¡100 % rel. humidity, 300¡1100 hPa- Humidity sensor and pressure sensor can be independently enabled\/disabled\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1* BME280 Sensor\u003cbr\u003e\u003cimg alt=\"6\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"1\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tPL7Xxk98KJjSZFoq6xS6pXa0.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"2\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1mOSWX_TI8KJjSsphq6AFppXaB.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"3\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB17uy_X6nD8KJjSspbq6zbEXXaU.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"4\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"5\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1TdIOXBbM8KJjSZFFq6yynpXah.jpg\"\u003e\u003cbr\u003e"} -
$0.09{"id":4518036570199,"title":"10DOF I2C\/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi","handle":"10dof-i2c-spi-mpu9250-bmp280-gy-91-bme280-kompass-barom-for-arduino-raspberry-pi","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eBME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity \u0026amp; Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eThe board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm\u003c\/li\u003e\n\u003cli\u003eDefault setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd \u0026amp; Vdd_IO.\u003c\/li\u003e\n\u003cli\u003eIf you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003ePackage: 2.5 mm x 2.5 mm x 0.93 mm\u003cbr\u003eDigital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)\u003cbr\u003eSupply voltage VDD main supply voltage range: 1.71 V to 3.6 V\u003cbr\u003eVDDIO interface voltage range: 1.2 V to 3.6 V\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCurrent consumption:\u003c\/strong\u003e\u003cbr\u003e1.8 uA @ 1 Hz humidity and temperature\u003cbr\u003e2.8 uA @ 1 Hz pressure and temperature\u003cbr\u003e3.6 uA @ 1 Hz humidity, pressure and temperature\u003cbr\u003e0.1 uA in sleep mode\u003cbr\u003eOperating range -40¡+85 C, 0¡100 % rel. humidity, 300¡1100 hPa- Humidity sensor and pressure sensor can be independently enabled\/disabled\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1* BME280 Sensor\u003cbr\u003e\u003cimg alt=\"6\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"1\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tPL7Xxk98KJjSZFoq6xS6pXa0.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"2\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1mOSWX_TI8KJjSsphq6AFppXaB.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"3\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB17uy_X6nD8KJjSspbq6zbEXXaU.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"4\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"5\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1TdIOXBbM8KJjSZFFq6yynpXah.jpg\"\u003e\u003cbr\u003e","published_at":"2020-05-20T02:50:32+08:00","created_at":"2020-05-20T02:50:33+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Raspberry Pi"],"price":774,"price_min":774,"price_max":2374,"available":true,"price_varies":true,"compare_at_price":459,"compare_at_price_min":459,"compare_at_price_max":459,"compare_at_price_varies":false,"variants":[{"id":32208968187991,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3402-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"10DOF I2C\/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi - 3pcs","public_title":"3pcs","options":["3pcs"],"price":774,"weight":6,"compare_at_price":459,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32208968220759,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3402-10","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"10DOF I2C\/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi - 10pcs","public_title":"10pcs","options":["10pcs"],"price":2374,"weight":20,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809","\/\/diytech.cc\/cdn\/shop\/products\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg?v=1590661824"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809","options":["Batch"],"media":[{"alt":null,"id":6316897173591,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809","width":800},{"alt":null,"id":6316896223319,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg?v=1590661824"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg?v=1590661824","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eBME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity \u0026amp; Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eThe board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm\u003c\/li\u003e\n\u003cli\u003eDefault setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd \u0026amp; Vdd_IO.\u003c\/li\u003e\n\u003cli\u003eIf you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003ePackage: 2.5 mm x 2.5 mm x 0.93 mm\u003cbr\u003eDigital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)\u003cbr\u003eSupply voltage VDD main supply voltage range: 1.71 V to 3.6 V\u003cbr\u003eVDDIO interface voltage range: 1.2 V to 3.6 V\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCurrent consumption:\u003c\/strong\u003e\u003cbr\u003e1.8 uA @ 1 Hz humidity and temperature\u003cbr\u003e2.8 uA @ 1 Hz pressure and temperature\u003cbr\u003e3.6 uA @ 1 Hz humidity, pressure and temperature\u003cbr\u003e0.1 uA in sleep mode\u003cbr\u003eOperating range -40¡+85 C, 0¡100 % rel. humidity, 300¡1100 hPa- Humidity sensor and pressure sensor can be independently enabled\/disabled\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1* BME280 Sensor\u003cbr\u003e\u003cimg alt=\"6\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"1\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tPL7Xxk98KJjSZFoq6xS6pXa0.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"2\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1mOSWX_TI8KJjSsphq6AFppXaB.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"3\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB17uy_X6nD8KJjSspbq6zbEXXaU.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"4\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"5\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1TdIOXBbM8KJjSZFFq6yynpXah.jpg\"\u003e\u003cbr\u003e"} -
$0.11{"id":4518036570199,"title":"10DOF I2C\/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi","handle":"10dof-i2c-spi-mpu9250-bmp280-gy-91-bme280-kompass-barom-for-arduino-raspberry-pi","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eBME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity \u0026amp; Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eThe board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm\u003c\/li\u003e\n\u003cli\u003eDefault setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd \u0026amp; Vdd_IO.\u003c\/li\u003e\n\u003cli\u003eIf you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003ePackage: 2.5 mm x 2.5 mm x 0.93 mm\u003cbr\u003eDigital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)\u003cbr\u003eSupply voltage VDD main supply voltage range: 1.71 V to 3.6 V\u003cbr\u003eVDDIO interface voltage range: 1.2 V to 3.6 V\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCurrent consumption:\u003c\/strong\u003e\u003cbr\u003e1.8 uA @ 1 Hz humidity and temperature\u003cbr\u003e2.8 uA @ 1 Hz pressure and temperature\u003cbr\u003e3.6 uA @ 1 Hz humidity, pressure and temperature\u003cbr\u003e0.1 uA in sleep mode\u003cbr\u003eOperating range -40¡+85 C, 0¡100 % rel. humidity, 300¡1100 hPa- Humidity sensor and pressure sensor can be independently enabled\/disabled\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1* BME280 Sensor\u003cbr\u003e\u003cimg alt=\"6\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"1\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tPL7Xxk98KJjSZFoq6xS6pXa0.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"2\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1mOSWX_TI8KJjSsphq6AFppXaB.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"3\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB17uy_X6nD8KJjSspbq6zbEXXaU.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"4\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"5\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1TdIOXBbM8KJjSZFFq6yynpXah.jpg\"\u003e\u003cbr\u003e","published_at":"2020-05-20T02:50:32+08:00","created_at":"2020-05-20T02:50:33+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Raspberry Pi"],"price":774,"price_min":774,"price_max":2374,"available":true,"price_varies":true,"compare_at_price":459,"compare_at_price_min":459,"compare_at_price_max":459,"compare_at_price_varies":false,"variants":[{"id":32208968187991,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3402-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"10DOF I2C\/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi - 3pcs","public_title":"3pcs","options":["3pcs"],"price":774,"weight":6,"compare_at_price":459,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32208968220759,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3402-10","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"10DOF I2C\/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi - 10pcs","public_title":"10pcs","options":["10pcs"],"price":2374,"weight":20,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809","\/\/diytech.cc\/cdn\/shop\/products\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg?v=1590661824"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809","options":["Batch"],"media":[{"alt":null,"id":6316897173591,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809","width":800},{"alt":null,"id":6316896223319,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg?v=1590661824"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg?v=1590661824","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eBME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity \u0026amp; Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eThe board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm\u003c\/li\u003e\n\u003cli\u003eDefault setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd \u0026amp; Vdd_IO.\u003c\/li\u003e\n\u003cli\u003eIf you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003ePackage: 2.5 mm x 2.5 mm x 0.93 mm\u003cbr\u003eDigital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)\u003cbr\u003eSupply voltage VDD main supply voltage range: 1.71 V to 3.6 V\u003cbr\u003eVDDIO interface voltage range: 1.2 V to 3.6 V\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCurrent consumption:\u003c\/strong\u003e\u003cbr\u003e1.8 uA @ 1 Hz humidity and temperature\u003cbr\u003e2.8 uA @ 1 Hz pressure and temperature\u003cbr\u003e3.6 uA @ 1 Hz humidity, pressure and temperature\u003cbr\u003e0.1 uA in sleep mode\u003cbr\u003eOperating range -40¡+85 C, 0¡100 % rel. humidity, 300¡1100 hPa- Humidity sensor and pressure sensor can be independently enabled\/disabled\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1* BME280 Sensor\u003cbr\u003e\u003cimg alt=\"6\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"1\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tPL7Xxk98KJjSZFoq6xS6pXa0.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"2\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1mOSWX_TI8KJjSsphq6AFppXaB.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"3\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB17uy_X6nD8KJjSspbq6zbEXXaU.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"4\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"5\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1TdIOXBbM8KJjSZFFq6yynpXah.jpg\"\u003e\u003cbr\u003e"} -
$0.11{"id":4518036570199,"title":"10DOF I2C\/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi","handle":"10dof-i2c-spi-mpu9250-bmp280-gy-91-bme280-kompass-barom-for-arduino-raspberry-pi","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eBME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity \u0026amp; Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eThe board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm\u003c\/li\u003e\n\u003cli\u003eDefault setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd \u0026amp; Vdd_IO.\u003c\/li\u003e\n\u003cli\u003eIf you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003ePackage: 2.5 mm x 2.5 mm x 0.93 mm\u003cbr\u003eDigital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)\u003cbr\u003eSupply voltage VDD main supply voltage range: 1.71 V to 3.6 V\u003cbr\u003eVDDIO interface voltage range: 1.2 V to 3.6 V\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCurrent consumption:\u003c\/strong\u003e\u003cbr\u003e1.8 uA @ 1 Hz humidity and temperature\u003cbr\u003e2.8 uA @ 1 Hz pressure and temperature\u003cbr\u003e3.6 uA @ 1 Hz humidity, pressure and temperature\u003cbr\u003e0.1 uA in sleep mode\u003cbr\u003eOperating range -40¡+85 C, 0¡100 % rel. humidity, 300¡1100 hPa- Humidity sensor and pressure sensor can be independently enabled\/disabled\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1* BME280 Sensor\u003cbr\u003e\u003cimg alt=\"6\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"1\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tPL7Xxk98KJjSZFoq6xS6pXa0.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"2\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1mOSWX_TI8KJjSsphq6AFppXaB.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"3\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB17uy_X6nD8KJjSspbq6zbEXXaU.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"4\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"5\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1TdIOXBbM8KJjSZFFq6yynpXah.jpg\"\u003e\u003cbr\u003e","published_at":"2020-05-20T02:50:32+08:00","created_at":"2020-05-20T02:50:33+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Raspberry Pi"],"price":774,"price_min":774,"price_max":2374,"available":true,"price_varies":true,"compare_at_price":459,"compare_at_price_min":459,"compare_at_price_max":459,"compare_at_price_varies":false,"variants":[{"id":32208968187991,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3402-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"10DOF I2C\/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi - 3pcs","public_title":"3pcs","options":["3pcs"],"price":774,"weight":6,"compare_at_price":459,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32208968220759,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3402-10","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"10DOF I2C\/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi - 10pcs","public_title":"10pcs","options":["10pcs"],"price":2374,"weight":20,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809","\/\/diytech.cc\/cdn\/shop\/products\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg?v=1590661824"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809","options":["Batch"],"media":[{"alt":null,"id":6316897173591,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809","width":800},{"alt":null,"id":6316896223319,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg?v=1590661824"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg?v=1590661824","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eBME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity \u0026amp; Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eThe board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm\u003c\/li\u003e\n\u003cli\u003eDefault setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd \u0026amp; Vdd_IO.\u003c\/li\u003e\n\u003cli\u003eIf you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003ePackage: 2.5 mm x 2.5 mm x 0.93 mm\u003cbr\u003eDigital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)\u003cbr\u003eSupply voltage VDD main supply voltage range: 1.71 V to 3.6 V\u003cbr\u003eVDDIO interface voltage range: 1.2 V to 3.6 V\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCurrent consumption:\u003c\/strong\u003e\u003cbr\u003e1.8 uA @ 1 Hz humidity and temperature\u003cbr\u003e2.8 uA @ 1 Hz pressure and temperature\u003cbr\u003e3.6 uA @ 1 Hz humidity, pressure and temperature\u003cbr\u003e0.1 uA in sleep mode\u003cbr\u003eOperating range -40¡+85 C, 0¡100 % rel. humidity, 300¡1100 hPa- Humidity sensor and pressure sensor can be independently enabled\/disabled\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1* BME280 Sensor\u003cbr\u003e\u003cimg alt=\"6\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"1\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tPL7Xxk98KJjSZFoq6xS6pXa0.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"2\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1mOSWX_TI8KJjSsphq6AFppXaB.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"3\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB17uy_X6nD8KJjSspbq6zbEXXaU.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"4\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"5\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1TdIOXBbM8KJjSZFFq6yynpXah.jpg\"\u003e\u003cbr\u003e"} -
$0.11{"id":4518036570199,"title":"10DOF I2C\/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi","handle":"10dof-i2c-spi-mpu9250-bmp280-gy-91-bme280-kompass-barom-for-arduino-raspberry-pi","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eBME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity \u0026amp; Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eThe board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm\u003c\/li\u003e\n\u003cli\u003eDefault setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd \u0026amp; Vdd_IO.\u003c\/li\u003e\n\u003cli\u003eIf you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003ePackage: 2.5 mm x 2.5 mm x 0.93 mm\u003cbr\u003eDigital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)\u003cbr\u003eSupply voltage VDD main supply voltage range: 1.71 V to 3.6 V\u003cbr\u003eVDDIO interface voltage range: 1.2 V to 3.6 V\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCurrent consumption:\u003c\/strong\u003e\u003cbr\u003e1.8 uA @ 1 Hz humidity and temperature\u003cbr\u003e2.8 uA @ 1 Hz pressure and temperature\u003cbr\u003e3.6 uA @ 1 Hz humidity, pressure and temperature\u003cbr\u003e0.1 uA in sleep mode\u003cbr\u003eOperating range -40¡+85 C, 0¡100 % rel. humidity, 300¡1100 hPa- Humidity sensor and pressure sensor can be independently enabled\/disabled\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1* BME280 Sensor\u003cbr\u003e\u003cimg alt=\"6\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"1\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tPL7Xxk98KJjSZFoq6xS6pXa0.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"2\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1mOSWX_TI8KJjSsphq6AFppXaB.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"3\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB17uy_X6nD8KJjSspbq6zbEXXaU.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"4\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"5\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1TdIOXBbM8KJjSZFFq6yynpXah.jpg\"\u003e\u003cbr\u003e","published_at":"2020-05-20T02:50:32+08:00","created_at":"2020-05-20T02:50:33+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Raspberry Pi"],"price":774,"price_min":774,"price_max":2374,"available":true,"price_varies":true,"compare_at_price":459,"compare_at_price_min":459,"compare_at_price_max":459,"compare_at_price_varies":false,"variants":[{"id":32208968187991,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3402-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"10DOF I2C\/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi - 3pcs","public_title":"3pcs","options":["3pcs"],"price":774,"weight":6,"compare_at_price":459,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32208968220759,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3402-10","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"10DOF I2C\/SPI MPU9250 BMP280 GY-91 BME280 Kompass Barom for Arduino Raspberry Pi - 10pcs","public_title":"10pcs","options":["10pcs"],"price":2374,"weight":20,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809","\/\/diytech.cc\/cdn\/shop\/products\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg?v=1590661824"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809","options":["Batch"],"media":[{"alt":null,"id":6316897173591,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg?v=1590661809","width":800},{"alt":null,"id":6316896223319,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg?v=1590661824"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg?v=1590661824","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eBME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity \u0026amp; Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eThe board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm\u003c\/li\u003e\n\u003cli\u003eDefault setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd \u0026amp; Vdd_IO.\u003c\/li\u003e\n\u003cli\u003eIf you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003ePackage: 2.5 mm x 2.5 mm x 0.93 mm\u003cbr\u003eDigital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)\u003cbr\u003eSupply voltage VDD main supply voltage range: 1.71 V to 3.6 V\u003cbr\u003eVDDIO interface voltage range: 1.2 V to 3.6 V\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCurrent consumption:\u003c\/strong\u003e\u003cbr\u003e1.8 uA @ 1 Hz humidity and temperature\u003cbr\u003e2.8 uA @ 1 Hz pressure and temperature\u003cbr\u003e3.6 uA @ 1 Hz humidity, pressure and temperature\u003cbr\u003e0.1 uA in sleep mode\u003cbr\u003eOperating range -40¡+85 C, 0¡100 % rel. humidity, 300¡1100 hPa- Humidity sensor and pressure sensor can be independently enabled\/disabled\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1* BME280 Sensor\u003cbr\u003e\u003cimg alt=\"6\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tj3JXtHO8KJjSZFHq6zWJFXa3.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"1\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1tPL7Xxk98KJjSZFoq6xS6pXa0.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"2\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1mOSWX_TI8KJjSsphq6AFppXaB.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"3\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB17uy_X6nD8KJjSspbq6zbEXXaU.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"4\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fo3KXwjN8KJjSZFkq6yboXXaE.jpg\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg alt=\"5\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1TdIOXBbM8KJjSZFFq6yynpXah.jpg\"\u003e\u003cbr\u003e"}
