ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible wi

ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266

brand: DIYTECH SKU:DT3884-03

$5.55

What is ESP8285?
ESP8285 = ESP8266 + 1 m, bearing high temperature 125 ¡æ (one for ESP8266 just 85 ¡æ). More importantly, the code programmed in ESP8266 can be used for ESP8285 intactly
The ESP-M3 encapsulates the high performance ESP8285 chip, which equals the ESP8266 chip plus 1 m of flash memory.
The ESP825 chip is encapsulated by the extended tensilica's L106 32-bit processor, along with SRAM.
The ESP825 has a full and Wi-Fi fuction that can be used alone and alsoused as a slave with other MCU hosters that can start directly from a flash-based. In addition, the built-in high-speed buffer is an allowance for system performance
Especially, the ESP8285 can be used as a Wi-Fi adapter by SPI / SDIO and / or I2C / UART interface, when it is applied to another MCU design

Features:
Ultra-small size
Support serial to Wi-Fi
Wireless Transparent transmission
Long transmission distance with ultra-low power
Having a high temperature of up to 125 ¡ã C, compared to 85 ¡æ for ESP8266

Parameters:

SOC characteristics
Built-in tensilica L106 ultra-low power 32-bit processor, the main frequency supports 80 MHz and160MHz, and rtos
Built-in protocol tcp / ip
Built-in one channel 10-bit high-precision ADC
Hanging interface: hspi, UART, I2C, I2S, IR remote controk, PWM, GPIO
Deep sleep current 10uA, the cutoff current is less than 5uA
Service, connect and transfer the data packet for 2 ms
To consume power less than 1.0 MW (DTIM3), when on stand by status
Built-in 1 m bytes for SPI flash memory

Wi-Fi Features:

Support 802.11 B / G / N / E / I
Station support, soft AP, soft mode AP + sta
Support for Wi-Fi Direct (P2P)
Support for ccmp (CBC-MAC, calculation mode), TKIP (mic, RC4), WAPI (SMS4), WEP (RC4), CRC, etc., for hardware acceleration
P2P search, P2P Go mode / gc mode and P2P power management
WPA / PA2PSK and WPS
802.11 securitycertification: pre-certification and TSN
Support 802.11n (2.4 GHz)
802.1 h / RFC1042 Encapsulation of the frame
Support seam less roaming
Support for remote updates and cloud updates (OTA)
Support for Smart config functions (including Android and iOS devices)

Interface Module:
2 * UART
1 * ADC
1 * en
1 * wake pin
1 * hspi
1 * I2C
1 * I2S
More than 10 * gpios
Operating temperature: -40 ¡æ - + 125 ¡æ
Module size: 26.8 mm * 16 mm

Application:
Electronic devices
Smart Power Plug, smart light
Infant monitor
Sensor networks
Security id tags
Wireless location beacon
Home automation
Mesh networks
IP video camera
Portable Electronics
Wireless recognition location
Industrial wireless control
?
Package Included:
1*ESP-M3 ESP8285 Serial Wireless Wi-Fi Module

Batch

3pcs 10pcs

Quantity

guaranteeQuality checked
Special gift cardsSpecial gift cards
Free return Within 60 days
Consultancyservice@diytech.cc

Description

SOC characteristics
Built-in tensilica L106 ultra-low power 32-bit processor, the main frequency supports 80 MHz and160MHz, and rtos
Built-in protocol tcp / ip
Built-in one channel 10-bit high-precision ADC
Hanging interface: hspi, UART, I2C, I2S, IR remote controk, PWM, GPIO
Deep sleep current 10uA, the cutoff current is less than 5uA
Service, connect and transfer the data packet for 2 ms
To consume power less than 1.0 MW (DTIM3), when on stand by status
Built-in 1 m bytes for SPI flash memory

Wi-Fi Features:

Support 802.11 B / G / N / E / I
Station support, soft AP, soft mode AP + sta
Support for Wi-Fi Direct (P2P)
Support for ccmp (CBC-MAC, calculation mode), TKIP (mic, RC4), WAPI (SMS4), WEP (RC4), CRC, etc., for hardware acceleration
P2P search, P2P Go mode / gc mode and P2P power management
WPA / PA2PSK and WPS
802.11 securitycertification: pre-certification and TSN
Support 802.11n (2.4 GHz)
802.1 h / RFC1042 Encapsulation of the frame
Support seam less roaming
Support for remote updates and cloud updates (OTA)
Support for Smart config functions (including Android and iOS devices)

Manual

Other Customers also buy:

0.91 inch ESP8266 OLED CP2014 Wireless WIFI Development Module for Arduino IOT Module 32M 32Mb Flash PCB Board

$17.20
{"id":4518012026967,"title":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266","handle":"esp-m3-esp8285-serial-wireless-wi-fi-transmission-module-compatible-with-esp8266","description":"\u003cstrong\u003eWhat is ESP8285?\u003c\/strong\u003e\u003cbr\u003eESP8285 = ESP8266 + 1 m, bearing high temperature 125 ¡æ (one for ESP8266 just 85 ¡æ). More importantly, the code programmed in ESP8266 can be used for ESP8285 intactly\u003cbr\u003eThe ESP-M3 encapsulates the high performance ESP8285 chip, which equals the ESP8266 chip plus 1 m of flash memory. \u003cbr\u003eThe ESP825 chip is encapsulated by the extended tensilica's L106 32-bit processor, along with SRAM. \u003cbr\u003eThe ESP825 has a full and Wi-Fi fuction that can be used alone and alsoused as a slave with other MCU hosters that can start directly from a flash-based. In addition, the built-in high-speed buffer is an allowance for system performance\u003cbr\u003eEspecially, the ESP8285 can be used as a Wi-Fi adapter by SPI \/ SDIO and \/ or I2C \/ UART interface, when it is applied to another MCU design\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eUltra-small size\u003cbr\u003eSupport serial to Wi-Fi\u003cbr\u003eWireless Transparent transmission\u003cbr\u003eLong transmission distance with ultra-low power\u003cbr\u003eHaving a high temperature of up to 125 ¡ã C, compared to 85 ¡æ for ESP8266\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSOC characteristics\u003c\/li\u003e\n\u003cli\u003eBuilt-in tensilica L106 ultra-low power 32-bit processor, the main frequency supports 80 MHz and160MHz, and rtos\u003c\/li\u003e\n\u003cli\u003eBuilt-in protocol tcp \/ ip\u003c\/li\u003e\n\u003cli\u003eBuilt-in one channel 10-bit high-precision ADC\u003c\/li\u003e\n\u003cli\u003eHanging interface: hspi, UART, I2C, I2S, IR remote controk, PWM, GPIO\u003c\/li\u003e\n\u003cli\u003eDeep sleep current 10uA, the cutoff current is less than 5uA\u003c\/li\u003e\n\u003cli\u003eService, connect and transfer the data packet for 2 ms\u003c\/li\u003e\n\u003cli\u003eTo consume power less than 1.0 MW (DTIM3), when on stand by status\u003c\/li\u003e\n\u003cli\u003eBuilt-in 1 m bytes for SPI flash memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eWi-Fi Features:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSupport 802.11 B \/ G \/ N \/ E \/ I\u003c\/li\u003e\n\u003cli\u003eStation support, soft AP, soft mode AP + sta\u003c\/li\u003e\n\u003cli\u003eSupport for Wi-Fi Direct (P2P)\u003c\/li\u003e\n\u003cli\u003eSupport for ccmp (CBC-MAC, calculation mode), TKIP (mic, RC4), WAPI (SMS4), WEP (RC4), CRC, etc., for hardware acceleration\u003c\/li\u003e\n\u003cli\u003eP2P search, P2P Go mode \/ gc mode and P2P power management\u003c\/li\u003e\n\u003cli\u003eWPA \/ PA2PSK and WPS\u003c\/li\u003e\n\u003cli\u003e802.11 securitycertification: pre-certification and TSN\u003c\/li\u003e\n\u003cli\u003eSupport 802.11n (2.4 GHz)\u003c\/li\u003e\n\u003cli\u003e802.1 h \/ RFC1042 Encapsulation of the frame\u003c\/li\u003e\n\u003cli\u003eSupport seam less roaming\u003c\/li\u003e\n\u003cli\u003eSupport for remote updates and cloud updates (OTA)\u003c\/li\u003e\n\u003cli\u003eSupport for Smart config functions (including Android and iOS devices)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eInterface Module:\u003c\/strong\u003e\u003cbr\u003e2 * UART\u003cbr\u003e1 * ADC\u003cbr\u003e1 * en\u003cbr\u003e1 * wake pin\u003cbr\u003e1 * hspi\u003cbr\u003e1 * I2C\u003cbr\u003e1 * I2S\u003cbr\u003eMore than 10 * gpios\u003cbr\u003eOperating temperature: -40 ¡æ - + 125 ¡æ\u003cbr\u003eModule size: 26.8 mm * 16 mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003eElectronic devices\u003cbr\u003eSmart Power Plug, smart light\u003cbr\u003eInfant monitor\u003cbr\u003eSensor networks\u003cbr\u003eSecurity id tags\u003cbr\u003eWireless location beacon\u003cbr\u003eHome automation\u003cbr\u003eMesh networks\u003cbr\u003eIP video camera\u003cbr\u003ePortable Electronics\u003cbr\u003eWireless recognition location\u003cbr\u003eIndustrial wireless control\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP-M3 ESP8285 Serial Wireless Wi-Fi Module","published_at":"2020-05-20T02:37:13+08:00","created_at":"2020-05-20T02:37:15+08:00","vendor":"DIYTECH","type":"WIFI Module","tags":["ESP8266","Wireless"],"price":555,"price_min":555,"price_max":1647,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179536855127,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3884-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266 - 3pcs","public_title":"3pcs","options":["3pcs"],"price":555,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179536887895,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3884-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266 - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1647,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823","options":["Batch"],"media":[{"alt":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266","id":6257380687959,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eWhat is ESP8285?\u003c\/strong\u003e\u003cbr\u003eESP8285 = ESP8266 + 1 m, bearing high temperature 125 ¡æ (one for ESP8266 just 85 ¡æ). More importantly, the code programmed in ESP8266 can be used for ESP8285 intactly\u003cbr\u003eThe ESP-M3 encapsulates the high performance ESP8285 chip, which equals the ESP8266 chip plus 1 m of flash memory. \u003cbr\u003eThe ESP825 chip is encapsulated by the extended tensilica's L106 32-bit processor, along with SRAM. \u003cbr\u003eThe ESP825 has a full and Wi-Fi fuction that can be used alone and alsoused as a slave with other MCU hosters that can start directly from a flash-based. In addition, the built-in high-speed buffer is an allowance for system performance\u003cbr\u003eEspecially, the ESP8285 can be used as a Wi-Fi adapter by SPI \/ SDIO and \/ or I2C \/ UART interface, when it is applied to another MCU design\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eUltra-small size\u003cbr\u003eSupport serial to Wi-Fi\u003cbr\u003eWireless Transparent transmission\u003cbr\u003eLong transmission distance with ultra-low power\u003cbr\u003eHaving a high temperature of up to 125 ¡ã C, compared to 85 ¡æ for ESP8266\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSOC characteristics\u003c\/li\u003e\n\u003cli\u003eBuilt-in tensilica L106 ultra-low power 32-bit processor, the main frequency supports 80 MHz and160MHz, and rtos\u003c\/li\u003e\n\u003cli\u003eBuilt-in protocol tcp \/ ip\u003c\/li\u003e\n\u003cli\u003eBuilt-in one channel 10-bit high-precision ADC\u003c\/li\u003e\n\u003cli\u003eHanging interface: hspi, UART, I2C, I2S, IR remote controk, PWM, GPIO\u003c\/li\u003e\n\u003cli\u003eDeep sleep current 10uA, the cutoff current is less than 5uA\u003c\/li\u003e\n\u003cli\u003eService, connect and transfer the data packet for 2 ms\u003c\/li\u003e\n\u003cli\u003eTo consume power less than 1.0 MW (DTIM3), when on stand by status\u003c\/li\u003e\n\u003cli\u003eBuilt-in 1 m bytes for SPI flash memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eWi-Fi Features:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSupport 802.11 B \/ G \/ N \/ E \/ I\u003c\/li\u003e\n\u003cli\u003eStation support, soft AP, soft mode AP + sta\u003c\/li\u003e\n\u003cli\u003eSupport for Wi-Fi Direct (P2P)\u003c\/li\u003e\n\u003cli\u003eSupport for ccmp (CBC-MAC, calculation mode), TKIP (mic, RC4), WAPI (SMS4), WEP (RC4), CRC, etc., for hardware acceleration\u003c\/li\u003e\n\u003cli\u003eP2P search, P2P Go mode \/ gc mode and P2P power management\u003c\/li\u003e\n\u003cli\u003eWPA \/ PA2PSK and WPS\u003c\/li\u003e\n\u003cli\u003e802.11 securitycertification: pre-certification and TSN\u003c\/li\u003e\n\u003cli\u003eSupport 802.11n (2.4 GHz)\u003c\/li\u003e\n\u003cli\u003e802.1 h \/ RFC1042 Encapsulation of the frame\u003c\/li\u003e\n\u003cli\u003eSupport seam less roaming\u003c\/li\u003e\n\u003cli\u003eSupport for remote updates and cloud updates (OTA)\u003c\/li\u003e\n\u003cli\u003eSupport for Smart config functions (including Android and iOS devices)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eInterface Module:\u003c\/strong\u003e\u003cbr\u003e2 * UART\u003cbr\u003e1 * ADC\u003cbr\u003e1 * en\u003cbr\u003e1 * wake pin\u003cbr\u003e1 * hspi\u003cbr\u003e1 * I2C\u003cbr\u003e1 * I2S\u003cbr\u003eMore than 10 * gpios\u003cbr\u003eOperating temperature: -40 ¡æ - + 125 ¡æ\u003cbr\u003eModule size: 26.8 mm * 16 mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003eElectronic devices\u003cbr\u003eSmart Power Plug, smart light\u003cbr\u003eInfant monitor\u003cbr\u003eSensor networks\u003cbr\u003eSecurity id tags\u003cbr\u003eWireless location beacon\u003cbr\u003eHome automation\u003cbr\u003eMesh networks\u003cbr\u003eIP video camera\u003cbr\u003ePortable Electronics\u003cbr\u003eWireless recognition location\u003cbr\u003eIndustrial wireless control\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP-M3 ESP8285 Serial Wireless Wi-Fi Module"}
ESP-M2 ESP8285 Serial Port Wireless WiFi Adapter Transmission Module DC 3.3V For ESP8266 1M Long-range Ultra-low power Antenna

$5.37
{"id":4518012026967,"title":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266","handle":"esp-m3-esp8285-serial-wireless-wi-fi-transmission-module-compatible-with-esp8266","description":"\u003cstrong\u003eWhat is ESP8285?\u003c\/strong\u003e\u003cbr\u003eESP8285 = ESP8266 + 1 m, bearing high temperature 125 ¡æ (one for ESP8266 just 85 ¡æ). More importantly, the code programmed in ESP8266 can be used for ESP8285 intactly\u003cbr\u003eThe ESP-M3 encapsulates the high performance ESP8285 chip, which equals the ESP8266 chip plus 1 m of flash memory. \u003cbr\u003eThe ESP825 chip is encapsulated by the extended tensilica's L106 32-bit processor, along with SRAM. \u003cbr\u003eThe ESP825 has a full and Wi-Fi fuction that can be used alone and alsoused as a slave with other MCU hosters that can start directly from a flash-based. In addition, the built-in high-speed buffer is an allowance for system performance\u003cbr\u003eEspecially, the ESP8285 can be used as a Wi-Fi adapter by SPI \/ SDIO and \/ or I2C \/ UART interface, when it is applied to another MCU design\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eUltra-small size\u003cbr\u003eSupport serial to Wi-Fi\u003cbr\u003eWireless Transparent transmission\u003cbr\u003eLong transmission distance with ultra-low power\u003cbr\u003eHaving a high temperature of up to 125 ¡ã C, compared to 85 ¡æ for ESP8266\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSOC characteristics\u003c\/li\u003e\n\u003cli\u003eBuilt-in tensilica L106 ultra-low power 32-bit processor, the main frequency supports 80 MHz and160MHz, and rtos\u003c\/li\u003e\n\u003cli\u003eBuilt-in protocol tcp \/ ip\u003c\/li\u003e\n\u003cli\u003eBuilt-in one channel 10-bit high-precision ADC\u003c\/li\u003e\n\u003cli\u003eHanging interface: hspi, UART, I2C, I2S, IR remote controk, PWM, GPIO\u003c\/li\u003e\n\u003cli\u003eDeep sleep current 10uA, the cutoff current is less than 5uA\u003c\/li\u003e\n\u003cli\u003eService, connect and transfer the data packet for 2 ms\u003c\/li\u003e\n\u003cli\u003eTo consume power less than 1.0 MW (DTIM3), when on stand by status\u003c\/li\u003e\n\u003cli\u003eBuilt-in 1 m bytes for SPI flash memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eWi-Fi Features:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSupport 802.11 B \/ G \/ N \/ E \/ I\u003c\/li\u003e\n\u003cli\u003eStation support, soft AP, soft mode AP + sta\u003c\/li\u003e\n\u003cli\u003eSupport for Wi-Fi Direct (P2P)\u003c\/li\u003e\n\u003cli\u003eSupport for ccmp (CBC-MAC, calculation mode), TKIP (mic, RC4), WAPI (SMS4), WEP (RC4), CRC, etc., for hardware acceleration\u003c\/li\u003e\n\u003cli\u003eP2P search, P2P Go mode \/ gc mode and P2P power management\u003c\/li\u003e\n\u003cli\u003eWPA \/ PA2PSK and WPS\u003c\/li\u003e\n\u003cli\u003e802.11 securitycertification: pre-certification and TSN\u003c\/li\u003e\n\u003cli\u003eSupport 802.11n (2.4 GHz)\u003c\/li\u003e\n\u003cli\u003e802.1 h \/ RFC1042 Encapsulation of the frame\u003c\/li\u003e\n\u003cli\u003eSupport seam less roaming\u003c\/li\u003e\n\u003cli\u003eSupport for remote updates and cloud updates (OTA)\u003c\/li\u003e\n\u003cli\u003eSupport for Smart config functions (including Android and iOS devices)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eInterface Module:\u003c\/strong\u003e\u003cbr\u003e2 * UART\u003cbr\u003e1 * ADC\u003cbr\u003e1 * en\u003cbr\u003e1 * wake pin\u003cbr\u003e1 * hspi\u003cbr\u003e1 * I2C\u003cbr\u003e1 * I2S\u003cbr\u003eMore than 10 * gpios\u003cbr\u003eOperating temperature: -40 ¡æ - + 125 ¡æ\u003cbr\u003eModule size: 26.8 mm * 16 mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003eElectronic devices\u003cbr\u003eSmart Power Plug, smart light\u003cbr\u003eInfant monitor\u003cbr\u003eSensor networks\u003cbr\u003eSecurity id tags\u003cbr\u003eWireless location beacon\u003cbr\u003eHome automation\u003cbr\u003eMesh networks\u003cbr\u003eIP video camera\u003cbr\u003ePortable Electronics\u003cbr\u003eWireless recognition location\u003cbr\u003eIndustrial wireless control\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP-M3 ESP8285 Serial Wireless Wi-Fi Module","published_at":"2020-05-20T02:37:13+08:00","created_at":"2020-05-20T02:37:15+08:00","vendor":"DIYTECH","type":"WIFI Module","tags":["ESP8266","Wireless"],"price":555,"price_min":555,"price_max":1647,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179536855127,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3884-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266 - 3pcs","public_title":"3pcs","options":["3pcs"],"price":555,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179536887895,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3884-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266 - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1647,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823","options":["Batch"],"media":[{"alt":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266","id":6257380687959,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eWhat is ESP8285?\u003c\/strong\u003e\u003cbr\u003eESP8285 = ESP8266 + 1 m, bearing high temperature 125 ¡æ (one for ESP8266 just 85 ¡æ). More importantly, the code programmed in ESP8266 can be used for ESP8285 intactly\u003cbr\u003eThe ESP-M3 encapsulates the high performance ESP8285 chip, which equals the ESP8266 chip plus 1 m of flash memory. \u003cbr\u003eThe ESP825 chip is encapsulated by the extended tensilica's L106 32-bit processor, along with SRAM. \u003cbr\u003eThe ESP825 has a full and Wi-Fi fuction that can be used alone and alsoused as a slave with other MCU hosters that can start directly from a flash-based. In addition, the built-in high-speed buffer is an allowance for system performance\u003cbr\u003eEspecially, the ESP8285 can be used as a Wi-Fi adapter by SPI \/ SDIO and \/ or I2C \/ UART interface, when it is applied to another MCU design\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eUltra-small size\u003cbr\u003eSupport serial to Wi-Fi\u003cbr\u003eWireless Transparent transmission\u003cbr\u003eLong transmission distance with ultra-low power\u003cbr\u003eHaving a high temperature of up to 125 ¡ã C, compared to 85 ¡æ for ESP8266\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSOC characteristics\u003c\/li\u003e\n\u003cli\u003eBuilt-in tensilica L106 ultra-low power 32-bit processor, the main frequency supports 80 MHz and160MHz, and rtos\u003c\/li\u003e\n\u003cli\u003eBuilt-in protocol tcp \/ ip\u003c\/li\u003e\n\u003cli\u003eBuilt-in one channel 10-bit high-precision ADC\u003c\/li\u003e\n\u003cli\u003eHanging interface: hspi, UART, I2C, I2S, IR remote controk, PWM, GPIO\u003c\/li\u003e\n\u003cli\u003eDeep sleep current 10uA, the cutoff current is less than 5uA\u003c\/li\u003e\n\u003cli\u003eService, connect and transfer the data packet for 2 ms\u003c\/li\u003e\n\u003cli\u003eTo consume power less than 1.0 MW (DTIM3), when on stand by status\u003c\/li\u003e\n\u003cli\u003eBuilt-in 1 m bytes for SPI flash memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eWi-Fi Features:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSupport 802.11 B \/ G \/ N \/ E \/ I\u003c\/li\u003e\n\u003cli\u003eStation support, soft AP, soft mode AP + sta\u003c\/li\u003e\n\u003cli\u003eSupport for Wi-Fi Direct (P2P)\u003c\/li\u003e\n\u003cli\u003eSupport for ccmp (CBC-MAC, calculation mode), TKIP (mic, RC4), WAPI (SMS4), WEP (RC4), CRC, etc., for hardware acceleration\u003c\/li\u003e\n\u003cli\u003eP2P search, P2P Go mode \/ gc mode and P2P power management\u003c\/li\u003e\n\u003cli\u003eWPA \/ PA2PSK and WPS\u003c\/li\u003e\n\u003cli\u003e802.11 securitycertification: pre-certification and TSN\u003c\/li\u003e\n\u003cli\u003eSupport 802.11n (2.4 GHz)\u003c\/li\u003e\n\u003cli\u003e802.1 h \/ RFC1042 Encapsulation of the frame\u003c\/li\u003e\n\u003cli\u003eSupport seam less roaming\u003c\/li\u003e\n\u003cli\u003eSupport for remote updates and cloud updates (OTA)\u003c\/li\u003e\n\u003cli\u003eSupport for Smart config functions (including Android and iOS devices)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eInterface Module:\u003c\/strong\u003e\u003cbr\u003e2 * UART\u003cbr\u003e1 * ADC\u003cbr\u003e1 * en\u003cbr\u003e1 * wake pin\u003cbr\u003e1 * hspi\u003cbr\u003e1 * I2C\u003cbr\u003e1 * I2S\u003cbr\u003eMore than 10 * gpios\u003cbr\u003eOperating temperature: -40 ¡æ - + 125 ¡æ\u003cbr\u003eModule size: 26.8 mm * 16 mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003eElectronic devices\u003cbr\u003eSmart Power Plug, smart light\u003cbr\u003eInfant monitor\u003cbr\u003eSensor networks\u003cbr\u003eSecurity id tags\u003cbr\u003eWireless location beacon\u003cbr\u003eHome automation\u003cbr\u003eMesh networks\u003cbr\u003eIP video camera\u003cbr\u003ePortable Electronics\u003cbr\u003eWireless recognition location\u003cbr\u003eIndustrial wireless control\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP-M3 ESP8285 Serial Wireless Wi-Fi Module"}
ESP-M1 ESP8285 ESP8266 1M Flash Chip Wifi Wireless Module Serial Port Ultra Transmission With External Antenna Interface FZ2735

$5.55
{"id":4518012026967,"title":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266","handle":"esp-m3-esp8285-serial-wireless-wi-fi-transmission-module-compatible-with-esp8266","description":"\u003cstrong\u003eWhat is ESP8285?\u003c\/strong\u003e\u003cbr\u003eESP8285 = ESP8266 + 1 m, bearing high temperature 125 ¡æ (one for ESP8266 just 85 ¡æ). More importantly, the code programmed in ESP8266 can be used for ESP8285 intactly\u003cbr\u003eThe ESP-M3 encapsulates the high performance ESP8285 chip, which equals the ESP8266 chip plus 1 m of flash memory. \u003cbr\u003eThe ESP825 chip is encapsulated by the extended tensilica's L106 32-bit processor, along with SRAM. \u003cbr\u003eThe ESP825 has a full and Wi-Fi fuction that can be used alone and alsoused as a slave with other MCU hosters that can start directly from a flash-based. In addition, the built-in high-speed buffer is an allowance for system performance\u003cbr\u003eEspecially, the ESP8285 can be used as a Wi-Fi adapter by SPI \/ SDIO and \/ or I2C \/ UART interface, when it is applied to another MCU design\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eUltra-small size\u003cbr\u003eSupport serial to Wi-Fi\u003cbr\u003eWireless Transparent transmission\u003cbr\u003eLong transmission distance with ultra-low power\u003cbr\u003eHaving a high temperature of up to 125 ¡ã C, compared to 85 ¡æ for ESP8266\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSOC characteristics\u003c\/li\u003e\n\u003cli\u003eBuilt-in tensilica L106 ultra-low power 32-bit processor, the main frequency supports 80 MHz and160MHz, and rtos\u003c\/li\u003e\n\u003cli\u003eBuilt-in protocol tcp \/ ip\u003c\/li\u003e\n\u003cli\u003eBuilt-in one channel 10-bit high-precision ADC\u003c\/li\u003e\n\u003cli\u003eHanging interface: hspi, UART, I2C, I2S, IR remote controk, PWM, GPIO\u003c\/li\u003e\n\u003cli\u003eDeep sleep current 10uA, the cutoff current is less than 5uA\u003c\/li\u003e\n\u003cli\u003eService, connect and transfer the data packet for 2 ms\u003c\/li\u003e\n\u003cli\u003eTo consume power less than 1.0 MW (DTIM3), when on stand by status\u003c\/li\u003e\n\u003cli\u003eBuilt-in 1 m bytes for SPI flash memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eWi-Fi Features:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSupport 802.11 B \/ G \/ N \/ E \/ I\u003c\/li\u003e\n\u003cli\u003eStation support, soft AP, soft mode AP + sta\u003c\/li\u003e\n\u003cli\u003eSupport for Wi-Fi Direct (P2P)\u003c\/li\u003e\n\u003cli\u003eSupport for ccmp (CBC-MAC, calculation mode), TKIP (mic, RC4), WAPI (SMS4), WEP (RC4), CRC, etc., for hardware acceleration\u003c\/li\u003e\n\u003cli\u003eP2P search, P2P Go mode \/ gc mode and P2P power management\u003c\/li\u003e\n\u003cli\u003eWPA \/ PA2PSK and WPS\u003c\/li\u003e\n\u003cli\u003e802.11 securitycertification: pre-certification and TSN\u003c\/li\u003e\n\u003cli\u003eSupport 802.11n (2.4 GHz)\u003c\/li\u003e\n\u003cli\u003e802.1 h \/ RFC1042 Encapsulation of the frame\u003c\/li\u003e\n\u003cli\u003eSupport seam less roaming\u003c\/li\u003e\n\u003cli\u003eSupport for remote updates and cloud updates (OTA)\u003c\/li\u003e\n\u003cli\u003eSupport for Smart config functions (including Android and iOS devices)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eInterface Module:\u003c\/strong\u003e\u003cbr\u003e2 * UART\u003cbr\u003e1 * ADC\u003cbr\u003e1 * en\u003cbr\u003e1 * wake pin\u003cbr\u003e1 * hspi\u003cbr\u003e1 * I2C\u003cbr\u003e1 * I2S\u003cbr\u003eMore than 10 * gpios\u003cbr\u003eOperating temperature: -40 ¡æ - + 125 ¡æ\u003cbr\u003eModule size: 26.8 mm * 16 mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003eElectronic devices\u003cbr\u003eSmart Power Plug, smart light\u003cbr\u003eInfant monitor\u003cbr\u003eSensor networks\u003cbr\u003eSecurity id tags\u003cbr\u003eWireless location beacon\u003cbr\u003eHome automation\u003cbr\u003eMesh networks\u003cbr\u003eIP video camera\u003cbr\u003ePortable Electronics\u003cbr\u003eWireless recognition location\u003cbr\u003eIndustrial wireless control\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP-M3 ESP8285 Serial Wireless Wi-Fi Module","published_at":"2020-05-20T02:37:13+08:00","created_at":"2020-05-20T02:37:15+08:00","vendor":"DIYTECH","type":"WIFI Module","tags":["ESP8266","Wireless"],"price":555,"price_min":555,"price_max":1647,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179536855127,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3884-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266 - 3pcs","public_title":"3pcs","options":["3pcs"],"price":555,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179536887895,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3884-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266 - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1647,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823","options":["Batch"],"media":[{"alt":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266","id":6257380687959,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eWhat is ESP8285?\u003c\/strong\u003e\u003cbr\u003eESP8285 = ESP8266 + 1 m, bearing high temperature 125 ¡æ (one for ESP8266 just 85 ¡æ). More importantly, the code programmed in ESP8266 can be used for ESP8285 intactly\u003cbr\u003eThe ESP-M3 encapsulates the high performance ESP8285 chip, which equals the ESP8266 chip plus 1 m of flash memory. \u003cbr\u003eThe ESP825 chip is encapsulated by the extended tensilica's L106 32-bit processor, along with SRAM. \u003cbr\u003eThe ESP825 has a full and Wi-Fi fuction that can be used alone and alsoused as a slave with other MCU hosters that can start directly from a flash-based. In addition, the built-in high-speed buffer is an allowance for system performance\u003cbr\u003eEspecially, the ESP8285 can be used as a Wi-Fi adapter by SPI \/ SDIO and \/ or I2C \/ UART interface, when it is applied to another MCU design\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eUltra-small size\u003cbr\u003eSupport serial to Wi-Fi\u003cbr\u003eWireless Transparent transmission\u003cbr\u003eLong transmission distance with ultra-low power\u003cbr\u003eHaving a high temperature of up to 125 ¡ã C, compared to 85 ¡æ for ESP8266\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSOC characteristics\u003c\/li\u003e\n\u003cli\u003eBuilt-in tensilica L106 ultra-low power 32-bit processor, the main frequency supports 80 MHz and160MHz, and rtos\u003c\/li\u003e\n\u003cli\u003eBuilt-in protocol tcp \/ ip\u003c\/li\u003e\n\u003cli\u003eBuilt-in one channel 10-bit high-precision ADC\u003c\/li\u003e\n\u003cli\u003eHanging interface: hspi, UART, I2C, I2S, IR remote controk, PWM, GPIO\u003c\/li\u003e\n\u003cli\u003eDeep sleep current 10uA, the cutoff current is less than 5uA\u003c\/li\u003e\n\u003cli\u003eService, connect and transfer the data packet for 2 ms\u003c\/li\u003e\n\u003cli\u003eTo consume power less than 1.0 MW (DTIM3), when on stand by status\u003c\/li\u003e\n\u003cli\u003eBuilt-in 1 m bytes for SPI flash memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eWi-Fi Features:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSupport 802.11 B \/ G \/ N \/ E \/ I\u003c\/li\u003e\n\u003cli\u003eStation support, soft AP, soft mode AP + sta\u003c\/li\u003e\n\u003cli\u003eSupport for Wi-Fi Direct (P2P)\u003c\/li\u003e\n\u003cli\u003eSupport for ccmp (CBC-MAC, calculation mode), TKIP (mic, RC4), WAPI (SMS4), WEP (RC4), CRC, etc., for hardware acceleration\u003c\/li\u003e\n\u003cli\u003eP2P search, P2P Go mode \/ gc mode and P2P power management\u003c\/li\u003e\n\u003cli\u003eWPA \/ PA2PSK and WPS\u003c\/li\u003e\n\u003cli\u003e802.11 securitycertification: pre-certification and TSN\u003c\/li\u003e\n\u003cli\u003eSupport 802.11n (2.4 GHz)\u003c\/li\u003e\n\u003cli\u003e802.1 h \/ RFC1042 Encapsulation of the frame\u003c\/li\u003e\n\u003cli\u003eSupport seam less roaming\u003c\/li\u003e\n\u003cli\u003eSupport for remote updates and cloud updates (OTA)\u003c\/li\u003e\n\u003cli\u003eSupport for Smart config functions (including Android and iOS devices)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eInterface Module:\u003c\/strong\u003e\u003cbr\u003e2 * UART\u003cbr\u003e1 * ADC\u003cbr\u003e1 * en\u003cbr\u003e1 * wake pin\u003cbr\u003e1 * hspi\u003cbr\u003e1 * I2C\u003cbr\u003e1 * I2S\u003cbr\u003eMore than 10 * gpios\u003cbr\u003eOperating temperature: -40 ¡æ - + 125 ¡æ\u003cbr\u003eModule size: 26.8 mm * 16 mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003eElectronic devices\u003cbr\u003eSmart Power Plug, smart light\u003cbr\u003eInfant monitor\u003cbr\u003eSensor networks\u003cbr\u003eSecurity id tags\u003cbr\u003eWireless location beacon\u003cbr\u003eHome automation\u003cbr\u003eMesh networks\u003cbr\u003eIP video camera\u003cbr\u003ePortable Electronics\u003cbr\u003eWireless recognition location\u003cbr\u003eIndustrial wireless control\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP-M3 ESP8285 Serial Wireless Wi-Fi Module"}
RTL8710 Wireless WiFi Transceiver Module For Arduino Test Development Board Transmitter Receiver Module

$22.04
{"id":4518012026967,"title":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266","handle":"esp-m3-esp8285-serial-wireless-wi-fi-transmission-module-compatible-with-esp8266","description":"\u003cstrong\u003eWhat is ESP8285?\u003c\/strong\u003e\u003cbr\u003eESP8285 = ESP8266 + 1 m, bearing high temperature 125 ¡æ (one for ESP8266 just 85 ¡æ). More importantly, the code programmed in ESP8266 can be used for ESP8285 intactly\u003cbr\u003eThe ESP-M3 encapsulates the high performance ESP8285 chip, which equals the ESP8266 chip plus 1 m of flash memory. \u003cbr\u003eThe ESP825 chip is encapsulated by the extended tensilica's L106 32-bit processor, along with SRAM. \u003cbr\u003eThe ESP825 has a full and Wi-Fi fuction that can be used alone and alsoused as a slave with other MCU hosters that can start directly from a flash-based. In addition, the built-in high-speed buffer is an allowance for system performance\u003cbr\u003eEspecially, the ESP8285 can be used as a Wi-Fi adapter by SPI \/ SDIO and \/ or I2C \/ UART interface, when it is applied to another MCU design\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eUltra-small size\u003cbr\u003eSupport serial to Wi-Fi\u003cbr\u003eWireless Transparent transmission\u003cbr\u003eLong transmission distance with ultra-low power\u003cbr\u003eHaving a high temperature of up to 125 ¡ã C, compared to 85 ¡æ for ESP8266\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSOC characteristics\u003c\/li\u003e\n\u003cli\u003eBuilt-in tensilica L106 ultra-low power 32-bit processor, the main frequency supports 80 MHz and160MHz, and rtos\u003c\/li\u003e\n\u003cli\u003eBuilt-in protocol tcp \/ ip\u003c\/li\u003e\n\u003cli\u003eBuilt-in one channel 10-bit high-precision ADC\u003c\/li\u003e\n\u003cli\u003eHanging interface: hspi, UART, I2C, I2S, IR remote controk, PWM, GPIO\u003c\/li\u003e\n\u003cli\u003eDeep sleep current 10uA, the cutoff current is less than 5uA\u003c\/li\u003e\n\u003cli\u003eService, connect and transfer the data packet for 2 ms\u003c\/li\u003e\n\u003cli\u003eTo consume power less than 1.0 MW (DTIM3), when on stand by status\u003c\/li\u003e\n\u003cli\u003eBuilt-in 1 m bytes for SPI flash memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eWi-Fi Features:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSupport 802.11 B \/ G \/ N \/ E \/ I\u003c\/li\u003e\n\u003cli\u003eStation support, soft AP, soft mode AP + sta\u003c\/li\u003e\n\u003cli\u003eSupport for Wi-Fi Direct (P2P)\u003c\/li\u003e\n\u003cli\u003eSupport for ccmp (CBC-MAC, calculation mode), TKIP (mic, RC4), WAPI (SMS4), WEP (RC4), CRC, etc., for hardware acceleration\u003c\/li\u003e\n\u003cli\u003eP2P search, P2P Go mode \/ gc mode and P2P power management\u003c\/li\u003e\n\u003cli\u003eWPA \/ PA2PSK and WPS\u003c\/li\u003e\n\u003cli\u003e802.11 securitycertification: pre-certification and TSN\u003c\/li\u003e\n\u003cli\u003eSupport 802.11n (2.4 GHz)\u003c\/li\u003e\n\u003cli\u003e802.1 h \/ RFC1042 Encapsulation of the frame\u003c\/li\u003e\n\u003cli\u003eSupport seam less roaming\u003c\/li\u003e\n\u003cli\u003eSupport for remote updates and cloud updates (OTA)\u003c\/li\u003e\n\u003cli\u003eSupport for Smart config functions (including Android and iOS devices)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eInterface Module:\u003c\/strong\u003e\u003cbr\u003e2 * UART\u003cbr\u003e1 * ADC\u003cbr\u003e1 * en\u003cbr\u003e1 * wake pin\u003cbr\u003e1 * hspi\u003cbr\u003e1 * I2C\u003cbr\u003e1 * I2S\u003cbr\u003eMore than 10 * gpios\u003cbr\u003eOperating temperature: -40 ¡æ - + 125 ¡æ\u003cbr\u003eModule size: 26.8 mm * 16 mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003eElectronic devices\u003cbr\u003eSmart Power Plug, smart light\u003cbr\u003eInfant monitor\u003cbr\u003eSensor networks\u003cbr\u003eSecurity id tags\u003cbr\u003eWireless location beacon\u003cbr\u003eHome automation\u003cbr\u003eMesh networks\u003cbr\u003eIP video camera\u003cbr\u003ePortable Electronics\u003cbr\u003eWireless recognition location\u003cbr\u003eIndustrial wireless control\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP-M3 ESP8285 Serial Wireless Wi-Fi Module","published_at":"2020-05-20T02:37:13+08:00","created_at":"2020-05-20T02:37:15+08:00","vendor":"DIYTECH","type":"WIFI Module","tags":["ESP8266","Wireless"],"price":555,"price_min":555,"price_max":1647,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179536855127,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3884-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266 - 3pcs","public_title":"3pcs","options":["3pcs"],"price":555,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179536887895,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3884-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266 - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1647,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823","options":["Batch"],"media":[{"alt":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266","id":6257380687959,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eWhat is ESP8285?\u003c\/strong\u003e\u003cbr\u003eESP8285 = ESP8266 + 1 m, bearing high temperature 125 ¡æ (one for ESP8266 just 85 ¡æ). More importantly, the code programmed in ESP8266 can be used for ESP8285 intactly\u003cbr\u003eThe ESP-M3 encapsulates the high performance ESP8285 chip, which equals the ESP8266 chip plus 1 m of flash memory. \u003cbr\u003eThe ESP825 chip is encapsulated by the extended tensilica's L106 32-bit processor, along with SRAM. \u003cbr\u003eThe ESP825 has a full and Wi-Fi fuction that can be used alone and alsoused as a slave with other MCU hosters that can start directly from a flash-based. In addition, the built-in high-speed buffer is an allowance for system performance\u003cbr\u003eEspecially, the ESP8285 can be used as a Wi-Fi adapter by SPI \/ SDIO and \/ or I2C \/ UART interface, when it is applied to another MCU design\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eUltra-small size\u003cbr\u003eSupport serial to Wi-Fi\u003cbr\u003eWireless Transparent transmission\u003cbr\u003eLong transmission distance with ultra-low power\u003cbr\u003eHaving a high temperature of up to 125 ¡ã C, compared to 85 ¡æ for ESP8266\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSOC characteristics\u003c\/li\u003e\n\u003cli\u003eBuilt-in tensilica L106 ultra-low power 32-bit processor, the main frequency supports 80 MHz and160MHz, and rtos\u003c\/li\u003e\n\u003cli\u003eBuilt-in protocol tcp \/ ip\u003c\/li\u003e\n\u003cli\u003eBuilt-in one channel 10-bit high-precision ADC\u003c\/li\u003e\n\u003cli\u003eHanging interface: hspi, UART, I2C, I2S, IR remote controk, PWM, GPIO\u003c\/li\u003e\n\u003cli\u003eDeep sleep current 10uA, the cutoff current is less than 5uA\u003c\/li\u003e\n\u003cli\u003eService, connect and transfer the data packet for 2 ms\u003c\/li\u003e\n\u003cli\u003eTo consume power less than 1.0 MW (DTIM3), when on stand by status\u003c\/li\u003e\n\u003cli\u003eBuilt-in 1 m bytes for SPI flash memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eWi-Fi Features:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSupport 802.11 B \/ G \/ N \/ E \/ I\u003c\/li\u003e\n\u003cli\u003eStation support, soft AP, soft mode AP + sta\u003c\/li\u003e\n\u003cli\u003eSupport for Wi-Fi Direct (P2P)\u003c\/li\u003e\n\u003cli\u003eSupport for ccmp (CBC-MAC, calculation mode), TKIP (mic, RC4), WAPI (SMS4), WEP (RC4), CRC, etc., for hardware acceleration\u003c\/li\u003e\n\u003cli\u003eP2P search, P2P Go mode \/ gc mode and P2P power management\u003c\/li\u003e\n\u003cli\u003eWPA \/ PA2PSK and WPS\u003c\/li\u003e\n\u003cli\u003e802.11 securitycertification: pre-certification and TSN\u003c\/li\u003e\n\u003cli\u003eSupport 802.11n (2.4 GHz)\u003c\/li\u003e\n\u003cli\u003e802.1 h \/ RFC1042 Encapsulation of the frame\u003c\/li\u003e\n\u003cli\u003eSupport seam less roaming\u003c\/li\u003e\n\u003cli\u003eSupport for remote updates and cloud updates (OTA)\u003c\/li\u003e\n\u003cli\u003eSupport for Smart config functions (including Android and iOS devices)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eInterface Module:\u003c\/strong\u003e\u003cbr\u003e2 * UART\u003cbr\u003e1 * ADC\u003cbr\u003e1 * en\u003cbr\u003e1 * wake pin\u003cbr\u003e1 * hspi\u003cbr\u003e1 * I2C\u003cbr\u003e1 * I2S\u003cbr\u003eMore than 10 * gpios\u003cbr\u003eOperating temperature: -40 ¡æ - + 125 ¡æ\u003cbr\u003eModule size: 26.8 mm * 16 mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003eElectronic devices\u003cbr\u003eSmart Power Plug, smart light\u003cbr\u003eInfant monitor\u003cbr\u003eSensor networks\u003cbr\u003eSecurity id tags\u003cbr\u003eWireless location beacon\u003cbr\u003eHome automation\u003cbr\u003eMesh networks\u003cbr\u003eIP video camera\u003cbr\u003ePortable Electronics\u003cbr\u003eWireless recognition location\u003cbr\u003eIndustrial wireless control\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP-M3 ESP8285 Serial Wireless Wi-Fi Module"}
Bluetooth Serial Transceiver Module Base Board Enable Clear Button For Arduino With LED 3.3V-6V Re-Seach Free Shipping

$0.28
{"id":4518012026967,"title":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266","handle":"esp-m3-esp8285-serial-wireless-wi-fi-transmission-module-compatible-with-esp8266","description":"\u003cstrong\u003eWhat is ESP8285?\u003c\/strong\u003e\u003cbr\u003eESP8285 = ESP8266 + 1 m, bearing high temperature 125 ¡æ (one for ESP8266 just 85 ¡æ). More importantly, the code programmed in ESP8266 can be used for ESP8285 intactly\u003cbr\u003eThe ESP-M3 encapsulates the high performance ESP8285 chip, which equals the ESP8266 chip plus 1 m of flash memory. \u003cbr\u003eThe ESP825 chip is encapsulated by the extended tensilica's L106 32-bit processor, along with SRAM. \u003cbr\u003eThe ESP825 has a full and Wi-Fi fuction that can be used alone and alsoused as a slave with other MCU hosters that can start directly from a flash-based. In addition, the built-in high-speed buffer is an allowance for system performance\u003cbr\u003eEspecially, the ESP8285 can be used as a Wi-Fi adapter by SPI \/ SDIO and \/ or I2C \/ UART interface, when it is applied to another MCU design\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eUltra-small size\u003cbr\u003eSupport serial to Wi-Fi\u003cbr\u003eWireless Transparent transmission\u003cbr\u003eLong transmission distance with ultra-low power\u003cbr\u003eHaving a high temperature of up to 125 ¡ã C, compared to 85 ¡æ for ESP8266\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSOC characteristics\u003c\/li\u003e\n\u003cli\u003eBuilt-in tensilica L106 ultra-low power 32-bit processor, the main frequency supports 80 MHz and160MHz, and rtos\u003c\/li\u003e\n\u003cli\u003eBuilt-in protocol tcp \/ ip\u003c\/li\u003e\n\u003cli\u003eBuilt-in one channel 10-bit high-precision ADC\u003c\/li\u003e\n\u003cli\u003eHanging interface: hspi, UART, I2C, I2S, IR remote controk, PWM, GPIO\u003c\/li\u003e\n\u003cli\u003eDeep sleep current 10uA, the cutoff current is less than 5uA\u003c\/li\u003e\n\u003cli\u003eService, connect and transfer the data packet for 2 ms\u003c\/li\u003e\n\u003cli\u003eTo consume power less than 1.0 MW (DTIM3), when on stand by status\u003c\/li\u003e\n\u003cli\u003eBuilt-in 1 m bytes for SPI flash memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eWi-Fi Features:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSupport 802.11 B \/ G \/ N \/ E \/ I\u003c\/li\u003e\n\u003cli\u003eStation support, soft AP, soft mode AP + sta\u003c\/li\u003e\n\u003cli\u003eSupport for Wi-Fi Direct (P2P)\u003c\/li\u003e\n\u003cli\u003eSupport for ccmp (CBC-MAC, calculation mode), TKIP (mic, RC4), WAPI (SMS4), WEP (RC4), CRC, etc., for hardware acceleration\u003c\/li\u003e\n\u003cli\u003eP2P search, P2P Go mode \/ gc mode and P2P power management\u003c\/li\u003e\n\u003cli\u003eWPA \/ PA2PSK and WPS\u003c\/li\u003e\n\u003cli\u003e802.11 securitycertification: pre-certification and TSN\u003c\/li\u003e\n\u003cli\u003eSupport 802.11n (2.4 GHz)\u003c\/li\u003e\n\u003cli\u003e802.1 h \/ RFC1042 Encapsulation of the frame\u003c\/li\u003e\n\u003cli\u003eSupport seam less roaming\u003c\/li\u003e\n\u003cli\u003eSupport for remote updates and cloud updates (OTA)\u003c\/li\u003e\n\u003cli\u003eSupport for Smart config functions (including Android and iOS devices)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eInterface Module:\u003c\/strong\u003e\u003cbr\u003e2 * UART\u003cbr\u003e1 * ADC\u003cbr\u003e1 * en\u003cbr\u003e1 * wake pin\u003cbr\u003e1 * hspi\u003cbr\u003e1 * I2C\u003cbr\u003e1 * I2S\u003cbr\u003eMore than 10 * gpios\u003cbr\u003eOperating temperature: -40 ¡æ - + 125 ¡æ\u003cbr\u003eModule size: 26.8 mm * 16 mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003eElectronic devices\u003cbr\u003eSmart Power Plug, smart light\u003cbr\u003eInfant monitor\u003cbr\u003eSensor networks\u003cbr\u003eSecurity id tags\u003cbr\u003eWireless location beacon\u003cbr\u003eHome automation\u003cbr\u003eMesh networks\u003cbr\u003eIP video camera\u003cbr\u003ePortable Electronics\u003cbr\u003eWireless recognition location\u003cbr\u003eIndustrial wireless control\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP-M3 ESP8285 Serial Wireless Wi-Fi Module","published_at":"2020-05-20T02:37:13+08:00","created_at":"2020-05-20T02:37:15+08:00","vendor":"DIYTECH","type":"WIFI Module","tags":["ESP8266","Wireless"],"price":555,"price_min":555,"price_max":1647,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179536855127,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3884-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266 - 3pcs","public_title":"3pcs","options":["3pcs"],"price":555,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179536887895,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3884-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266 - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1647,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823","options":["Batch"],"media":[{"alt":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266","id":6257380687959,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eWhat is ESP8285?\u003c\/strong\u003e\u003cbr\u003eESP8285 = ESP8266 + 1 m, bearing high temperature 125 ¡æ (one for ESP8266 just 85 ¡æ). More importantly, the code programmed in ESP8266 can be used for ESP8285 intactly\u003cbr\u003eThe ESP-M3 encapsulates the high performance ESP8285 chip, which equals the ESP8266 chip plus 1 m of flash memory. \u003cbr\u003eThe ESP825 chip is encapsulated by the extended tensilica's L106 32-bit processor, along with SRAM. \u003cbr\u003eThe ESP825 has a full and Wi-Fi fuction that can be used alone and alsoused as a slave with other MCU hosters that can start directly from a flash-based. In addition, the built-in high-speed buffer is an allowance for system performance\u003cbr\u003eEspecially, the ESP8285 can be used as a Wi-Fi adapter by SPI \/ SDIO and \/ or I2C \/ UART interface, when it is applied to another MCU design\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eUltra-small size\u003cbr\u003eSupport serial to Wi-Fi\u003cbr\u003eWireless Transparent transmission\u003cbr\u003eLong transmission distance with ultra-low power\u003cbr\u003eHaving a high temperature of up to 125 ¡ã C, compared to 85 ¡æ for ESP8266\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSOC characteristics\u003c\/li\u003e\n\u003cli\u003eBuilt-in tensilica L106 ultra-low power 32-bit processor, the main frequency supports 80 MHz and160MHz, and rtos\u003c\/li\u003e\n\u003cli\u003eBuilt-in protocol tcp \/ ip\u003c\/li\u003e\n\u003cli\u003eBuilt-in one channel 10-bit high-precision ADC\u003c\/li\u003e\n\u003cli\u003eHanging interface: hspi, UART, I2C, I2S, IR remote controk, PWM, GPIO\u003c\/li\u003e\n\u003cli\u003eDeep sleep current 10uA, the cutoff current is less than 5uA\u003c\/li\u003e\n\u003cli\u003eService, connect and transfer the data packet for 2 ms\u003c\/li\u003e\n\u003cli\u003eTo consume power less than 1.0 MW (DTIM3), when on stand by status\u003c\/li\u003e\n\u003cli\u003eBuilt-in 1 m bytes for SPI flash memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eWi-Fi Features:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSupport 802.11 B \/ G \/ N \/ E \/ I\u003c\/li\u003e\n\u003cli\u003eStation support, soft AP, soft mode AP + sta\u003c\/li\u003e\n\u003cli\u003eSupport for Wi-Fi Direct (P2P)\u003c\/li\u003e\n\u003cli\u003eSupport for ccmp (CBC-MAC, calculation mode), TKIP (mic, RC4), WAPI (SMS4), WEP (RC4), CRC, etc., for hardware acceleration\u003c\/li\u003e\n\u003cli\u003eP2P search, P2P Go mode \/ gc mode and P2P power management\u003c\/li\u003e\n\u003cli\u003eWPA \/ PA2PSK and WPS\u003c\/li\u003e\n\u003cli\u003e802.11 securitycertification: pre-certification and TSN\u003c\/li\u003e\n\u003cli\u003eSupport 802.11n (2.4 GHz)\u003c\/li\u003e\n\u003cli\u003e802.1 h \/ RFC1042 Encapsulation of the frame\u003c\/li\u003e\n\u003cli\u003eSupport seam less roaming\u003c\/li\u003e\n\u003cli\u003eSupport for remote updates and cloud updates (OTA)\u003c\/li\u003e\n\u003cli\u003eSupport for Smart config functions (including Android and iOS devices)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eInterface Module:\u003c\/strong\u003e\u003cbr\u003e2 * UART\u003cbr\u003e1 * ADC\u003cbr\u003e1 * en\u003cbr\u003e1 * wake pin\u003cbr\u003e1 * hspi\u003cbr\u003e1 * I2C\u003cbr\u003e1 * I2S\u003cbr\u003eMore than 10 * gpios\u003cbr\u003eOperating temperature: -40 ¡æ - + 125 ¡æ\u003cbr\u003eModule size: 26.8 mm * 16 mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003eElectronic devices\u003cbr\u003eSmart Power Plug, smart light\u003cbr\u003eInfant monitor\u003cbr\u003eSensor networks\u003cbr\u003eSecurity id tags\u003cbr\u003eWireless location beacon\u003cbr\u003eHome automation\u003cbr\u003eMesh networks\u003cbr\u003eIP video camera\u003cbr\u003ePortable Electronics\u003cbr\u003eWireless recognition location\u003cbr\u003eIndustrial wireless control\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP-M3 ESP8285 Serial Wireless Wi-Fi Module"}
TEA5767 FM Stereo Radio Module for Arduino Radio 76-108MHZ With Free Cable Antenna

$3.88
{"id":4518012026967,"title":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266","handle":"esp-m3-esp8285-serial-wireless-wi-fi-transmission-module-compatible-with-esp8266","description":"\u003cstrong\u003eWhat is ESP8285?\u003c\/strong\u003e\u003cbr\u003eESP8285 = ESP8266 + 1 m, bearing high temperature 125 ¡æ (one for ESP8266 just 85 ¡æ). More importantly, the code programmed in ESP8266 can be used for ESP8285 intactly\u003cbr\u003eThe ESP-M3 encapsulates the high performance ESP8285 chip, which equals the ESP8266 chip plus 1 m of flash memory. \u003cbr\u003eThe ESP825 chip is encapsulated by the extended tensilica's L106 32-bit processor, along with SRAM. \u003cbr\u003eThe ESP825 has a full and Wi-Fi fuction that can be used alone and alsoused as a slave with other MCU hosters that can start directly from a flash-based. In addition, the built-in high-speed buffer is an allowance for system performance\u003cbr\u003eEspecially, the ESP8285 can be used as a Wi-Fi adapter by SPI \/ SDIO and \/ or I2C \/ UART interface, when it is applied to another MCU design\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eUltra-small size\u003cbr\u003eSupport serial to Wi-Fi\u003cbr\u003eWireless Transparent transmission\u003cbr\u003eLong transmission distance with ultra-low power\u003cbr\u003eHaving a high temperature of up to 125 ¡ã C, compared to 85 ¡æ for ESP8266\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSOC characteristics\u003c\/li\u003e\n\u003cli\u003eBuilt-in tensilica L106 ultra-low power 32-bit processor, the main frequency supports 80 MHz and160MHz, and rtos\u003c\/li\u003e\n\u003cli\u003eBuilt-in protocol tcp \/ ip\u003c\/li\u003e\n\u003cli\u003eBuilt-in one channel 10-bit high-precision ADC\u003c\/li\u003e\n\u003cli\u003eHanging interface: hspi, UART, I2C, I2S, IR remote controk, PWM, GPIO\u003c\/li\u003e\n\u003cli\u003eDeep sleep current 10uA, the cutoff current is less than 5uA\u003c\/li\u003e\n\u003cli\u003eService, connect and transfer the data packet for 2 ms\u003c\/li\u003e\n\u003cli\u003eTo consume power less than 1.0 MW (DTIM3), when on stand by status\u003c\/li\u003e\n\u003cli\u003eBuilt-in 1 m bytes for SPI flash memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eWi-Fi Features:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSupport 802.11 B \/ G \/ N \/ E \/ I\u003c\/li\u003e\n\u003cli\u003eStation support, soft AP, soft mode AP + sta\u003c\/li\u003e\n\u003cli\u003eSupport for Wi-Fi Direct (P2P)\u003c\/li\u003e\n\u003cli\u003eSupport for ccmp (CBC-MAC, calculation mode), TKIP (mic, RC4), WAPI (SMS4), WEP (RC4), CRC, etc., for hardware acceleration\u003c\/li\u003e\n\u003cli\u003eP2P search, P2P Go mode \/ gc mode and P2P power management\u003c\/li\u003e\n\u003cli\u003eWPA \/ PA2PSK and WPS\u003c\/li\u003e\n\u003cli\u003e802.11 securitycertification: pre-certification and TSN\u003c\/li\u003e\n\u003cli\u003eSupport 802.11n (2.4 GHz)\u003c\/li\u003e\n\u003cli\u003e802.1 h \/ RFC1042 Encapsulation of the frame\u003c\/li\u003e\n\u003cli\u003eSupport seam less roaming\u003c\/li\u003e\n\u003cli\u003eSupport for remote updates and cloud updates (OTA)\u003c\/li\u003e\n\u003cli\u003eSupport for Smart config functions (including Android and iOS devices)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eInterface Module:\u003c\/strong\u003e\u003cbr\u003e2 * UART\u003cbr\u003e1 * ADC\u003cbr\u003e1 * en\u003cbr\u003e1 * wake pin\u003cbr\u003e1 * hspi\u003cbr\u003e1 * I2C\u003cbr\u003e1 * I2S\u003cbr\u003eMore than 10 * gpios\u003cbr\u003eOperating temperature: -40 ¡æ - + 125 ¡æ\u003cbr\u003eModule size: 26.8 mm * 16 mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003eElectronic devices\u003cbr\u003eSmart Power Plug, smart light\u003cbr\u003eInfant monitor\u003cbr\u003eSensor networks\u003cbr\u003eSecurity id tags\u003cbr\u003eWireless location beacon\u003cbr\u003eHome automation\u003cbr\u003eMesh networks\u003cbr\u003eIP video camera\u003cbr\u003ePortable Electronics\u003cbr\u003eWireless recognition location\u003cbr\u003eIndustrial wireless control\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP-M3 ESP8285 Serial Wireless Wi-Fi Module","published_at":"2020-05-20T02:37:13+08:00","created_at":"2020-05-20T02:37:15+08:00","vendor":"DIYTECH","type":"WIFI Module","tags":["ESP8266","Wireless"],"price":555,"price_min":555,"price_max":1647,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179536855127,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3884-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266 - 3pcs","public_title":"3pcs","options":["3pcs"],"price":555,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179536887895,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3884-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266 - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1647,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823","options":["Batch"],"media":[{"alt":"ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266","id":6257380687959,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1512979670_NsGfc.jpg?v=1592419823","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eWhat is ESP8285?\u003c\/strong\u003e\u003cbr\u003eESP8285 = ESP8266 + 1 m, bearing high temperature 125 ¡æ (one for ESP8266 just 85 ¡æ). More importantly, the code programmed in ESP8266 can be used for ESP8285 intactly\u003cbr\u003eThe ESP-M3 encapsulates the high performance ESP8285 chip, which equals the ESP8266 chip plus 1 m of flash memory. \u003cbr\u003eThe ESP825 chip is encapsulated by the extended tensilica's L106 32-bit processor, along with SRAM. \u003cbr\u003eThe ESP825 has a full and Wi-Fi fuction that can be used alone and alsoused as a slave with other MCU hosters that can start directly from a flash-based. In addition, the built-in high-speed buffer is an allowance for system performance\u003cbr\u003eEspecially, the ESP8285 can be used as a Wi-Fi adapter by SPI \/ SDIO and \/ or I2C \/ UART interface, when it is applied to another MCU design\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eUltra-small size\u003cbr\u003eSupport serial to Wi-Fi\u003cbr\u003eWireless Transparent transmission\u003cbr\u003eLong transmission distance with ultra-low power\u003cbr\u003eHaving a high temperature of up to 125 ¡ã C, compared to 85 ¡æ for ESP8266\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSOC characteristics\u003c\/li\u003e\n\u003cli\u003eBuilt-in tensilica L106 ultra-low power 32-bit processor, the main frequency supports 80 MHz and160MHz, and rtos\u003c\/li\u003e\n\u003cli\u003eBuilt-in protocol tcp \/ ip\u003c\/li\u003e\n\u003cli\u003eBuilt-in one channel 10-bit high-precision ADC\u003c\/li\u003e\n\u003cli\u003eHanging interface: hspi, UART, I2C, I2S, IR remote controk, PWM, GPIO\u003c\/li\u003e\n\u003cli\u003eDeep sleep current 10uA, the cutoff current is less than 5uA\u003c\/li\u003e\n\u003cli\u003eService, connect and transfer the data packet for 2 ms\u003c\/li\u003e\n\u003cli\u003eTo consume power less than 1.0 MW (DTIM3), when on stand by status\u003c\/li\u003e\n\u003cli\u003eBuilt-in 1 m bytes for SPI flash memory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eWi-Fi Features:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSupport 802.11 B \/ G \/ N \/ E \/ I\u003c\/li\u003e\n\u003cli\u003eStation support, soft AP, soft mode AP + sta\u003c\/li\u003e\n\u003cli\u003eSupport for Wi-Fi Direct (P2P)\u003c\/li\u003e\n\u003cli\u003eSupport for ccmp (CBC-MAC, calculation mode), TKIP (mic, RC4), WAPI (SMS4), WEP (RC4), CRC, etc., for hardware acceleration\u003c\/li\u003e\n\u003cli\u003eP2P search, P2P Go mode \/ gc mode and P2P power management\u003c\/li\u003e\n\u003cli\u003eWPA \/ PA2PSK and WPS\u003c\/li\u003e\n\u003cli\u003e802.11 securitycertification: pre-certification and TSN\u003c\/li\u003e\n\u003cli\u003eSupport 802.11n (2.4 GHz)\u003c\/li\u003e\n\u003cli\u003e802.1 h \/ RFC1042 Encapsulation of the frame\u003c\/li\u003e\n\u003cli\u003eSupport seam less roaming\u003c\/li\u003e\n\u003cli\u003eSupport for remote updates and cloud updates (OTA)\u003c\/li\u003e\n\u003cli\u003eSupport for Smart config functions (including Android and iOS devices)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eInterface Module:\u003c\/strong\u003e\u003cbr\u003e2 * UART\u003cbr\u003e1 * ADC\u003cbr\u003e1 * en\u003cbr\u003e1 * wake pin\u003cbr\u003e1 * hspi\u003cbr\u003e1 * I2C\u003cbr\u003e1 * I2S\u003cbr\u003eMore than 10 * gpios\u003cbr\u003eOperating temperature: -40 ¡æ - + 125 ¡æ\u003cbr\u003eModule size: 26.8 mm * 16 mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003eElectronic devices\u003cbr\u003eSmart Power Plug, smart light\u003cbr\u003eInfant monitor\u003cbr\u003eSensor networks\u003cbr\u003eSecurity id tags\u003cbr\u003eWireless location beacon\u003cbr\u003eHome automation\u003cbr\u003eMesh networks\u003cbr\u003eIP video camera\u003cbr\u003ePortable Electronics\u003cbr\u003eWireless recognition location\u003cbr\u003eIndustrial wireless control\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*ESP-M3 ESP8285 Serial Wireless Wi-Fi Module"}

Compare Box
Images
Name
Price
Vendor
Type
Variant
Available
Remove
Detail

ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266

Login

Reset your password

Register