3 In 1 Soil Meter-Square

Description:

• Functions: You can know plant when to water, and if it has sufficient sunlight, also you can test the ph level in the soil that you can adjustment the ph to a appropriate level by using this 3 in 1 moisture meter.

  Easy to Use: This 3-in-1 moisture meter with light & ph test function don’t need batteries, and you can use it indoor or outdoor. Insert probe into soil around 2-4 inches, then toggle switch to tester what you want to measure.

  Accuracy Reading: Moisture Range: 1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet), Relative Light: 0-2000lux (0-200 Low, 200-500 Low+, 500-1000 Nor, 1000-2000 High), pH Range: 3.5-8ph (3.5-6.5 Acid, 7-8 Alkaline).

  Indoor/Outdoor Design: It’s lightweight and Portable design, convenient for indoor and outdoor use.

  Wide Use: This 3-in-1 soil moisture meter is the ideal soil test kits for plant care, home and garden, lawn, farm.

  Jellas 3-In-1 Soil Moisture/ pH/ Sunlight Meter -- Plant Care Helper

  This 3- in-1 soil moisture meter is designed to better know the condition of your plant, monitor the soil moisture, help you control the soil ph acidity and see if plant gets sufficient sunlight to make plants grow healthier.

   

  Specifications:

  Moisture Range: 1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet).

  Relative Light: 0-2000 lux (0-200 Low, 200-500 Low+, 500-1000 Nor, 1000-2000 Hgh).

  pH Range: 3.5-8 pH (3.5-6.5 Acid, 7-8 Alkaline).

  Color: Green

   

  How to use:

  Step 1: toggle switch to moisture/ pH/ light position.

  Step 2: Stick the probe into the soil about 2-4 inches.

  Step 3: Adjust the position of the probe until the pointer on the dial swing slightly.

  Step 4: After 10 minutes, read the moisture/pH/light level in the dial.

  Step 5: Remove probe from soil and wipe clean after each use.

   

  3 In 1 Soil Meter-Round

   

  Step 1: Switch moisture/pH/light position

  Step 2: Stick the probe into the soil about 2-4 inches

  Step 3: Adjust the position of the probe until the pointer on the dial swing slightly

  Step 4: After 10 minutes, Note moisture/pH/light level in the dial

  Step 5: Remove probe from soil and wipe clean after each use

   

  Note:

  1. Don't insert the probe agaist stone or very hard soil in case to damage the probe

  2. Please wipe and clean the probe after each time using.

  3. Don't leave the meter in the soil for a long time

  4. Designed for testing soil, don't use it to test pure water or other liquids.

  5.The indicator will not move If the soil is too dry, please water the plant first and test again later.

   

  pH Range: 3.5-8 Ph (3.5-6.5 ACID, 7 NOR, 7-8 ALKALI)

  Moisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET)

  Relative Light: 0-2000 lux (0-200 LOW, 200-500LOW+, 500-1000 NOR 1000-2000 HGH)

   

  4 In 1 Soil Meter-Round

   

  • Electronic  display 4 in 1 soil analyzer is the latest soil speed measurement device, mainly to test the soil PH, moisture, temperature and light intensity of plants, the use of a section 9V Carbon battery(not include). This instrument through the liquid crystal display measurement parameters. The instrument also has low power indication and automatic power off function. It saves time and energy, high efficiency. This instrument is suitable for flowers and grass planting, garden greening.
     
    Features:
  •  

    1. Measure the light intensity of the current environment
    LOW-, LOW, LOW+, NOR-, NOR, NOR+, HGH-, HGH, HGH+
    2. Measuring the moisture content of the soil
    DRY+, DRY, NOR, WET, WET+
    3. Measure the temperature of the soil. The temperature measurement range is -9~+50°C (16~122°F). (Accuracy: 1°C/1°F)
    4, measuring the pH of the soil, PH measurement range: 3.5-9.0
     
    Parameter:
  •  

    Working temperature: +5°C~+40°C
    Size: 340mm*63mm*36mm
    Probe length: 200mm
    Weight: 200 grams
    Large screen LCD user interface
    Temperature metric conversion function
    Low battery alert function
    Power-saving automatic shutdown function, no operation for 5 minutes, automatic shutdown
    Easy to operate, easy to carry
    Power: 9V battery （Battery Not included）
     
    Using method:
     
    1.Before use, please install the battery, remove the probe protection cover
    1Light measurement
    A.PressONButton to open the instrument
    B.The highest point light source light sensor window.
    C.The intensity of the current light will be displayed on the liquid crystal display.
    be careful:Please do not block the light or light sensor to create a shadow
     
    2,PH Range measurement
    A.The back of thePH/CPush button toPHPosition.
    B.To insert the probe into the soil, the test should be carried out as soon as possible.
    C.Press [ONButton to start measuring.
    D.testPHValue will be displayed on the liquid crystal display
    E.Multiple measurements for several times to get the exact value of the.
     
    be careful:
    1.Perpendicular to the probe, in the middle of the edge of the plant stem.
    2.Please gently push the soil to avoid damaging the probe.
    3.If the measurement of the soil is too dry or fertile can not be measured accuratelyPHValue, the user can sprinkle a little water, half an hour after the measurement again
     
    3,Moisture measurement
    A.The back of thePH/CPush button toPosition of C
    B.As far as possible to insert the soil vertically.
    C.PressNOKey to start measurement
    D.The value of the soil moisture will be displayed on the LCD screen.
    E.Multiple measurements for several times to get the exact value of the.
     
    4.Temperature measurement;
    A.When measuring humidity, the soil temperature will be displayed on the LCD screen at the same time.
    B.Press [C/FahrenheitOFF] button to set the humidity is Fahrenheit or centigrade.
    be carefulIf the user does not insert the probe into the soil, it is shown that the temperature of the outer space is accurate.
     
    English instructions:
    Please install the battery before use, remove the probe cover.
    1, light measurement
    A. Press the ON button to turn on the instrument
    B. Align the highest point light source light sensor window.
    C. The current light intensity will be displayed on the LCD monitor.
     
    Do not block light or create a shadow to the light sensor
    2, PH range measurement
    A. Press the [PH / TEMP] button at the PH position on the back
    B. Insert the probe vertically into the soil and need to be tested as soon as possible. Do not insert the probe too deeply to damage the roots of the plant.
    C. Press the [ON] button to start the measurement.
    D. The PH value of the test will be displayed on the LCD screen
    E. Measure several times to get the exact value needed.
     
    Tips; 1. Vertical insertion of the probe, at the edge of the middle plant stem.
          2. Please gently push the soil to avoid damage to the probe.
          3. If the measured soil is too dry or fertile can not measure the exact PH value, the user can sprinkle water, half an hour after the measurement again
     
    3, moisture measurement
    A Press the [PH / TEMP] button on the back of the TEMP
    B as far as possible into the soil. Do not insert the probe too deeply to damage the roots of the plant.
    C Press the NO button to start the measurement
    D The soil moisture value will be displayed on the LCD screen.
    E Measure several times to get the exact value needed.
     
    4. Temperature measurement;
    A When measuring humidity, the soil moisture value will be displayed on the LCD display at the same time.
    B Press the [° C / ° F OFF OFF] button to set the humidity display to ° C or ° F.
    Tips: If the user does not insert the probe into the soil, then the display is the exact external space ambient temperature

  •  

    4 In 1 Soil Meter-Square

     

    Soil Meter Thermometer 4in1 Plant Earth Soil Ph Moisture Light Temperature Tools             

    Product Features:

    Wide LCD user-friendly display.

    Absolutely Brand new and high quality

    You can take good care of your plants.

    Notice function for low power status.

    For outdoor indoor plants, gardens and grass lawn.

    Easy to operate, lightweight and portable to carry.

    Metric to British system conversion for temperature.

    Automatic off function for energy saving, the unit will be automatically off after 5 minutes disabling.

    Simply insert the meter into the soil, switch to the setting you want to measure and read the scale.

    An ideal and necessary tool for gardeners, vegetable and fruit growers, and all those who plant trees and grass

    To avoid damaging the electrode, please clean the electrode after each use, do not use in soil with stones and insert forcibly.

     

    Specifications:

     

    Power supply: One 9V block battery (Not included)

    Main Unit Size: 122 x 63 x 36 mm

    Test Probe Size: 5 x 200 mm

    Test object: current light intensity, soil moisture, soil PH value, soil temperature

    Temperature measuring range: -9~+50(16~122), (accuracy: 1/1)

    PH measuring range: 3.5-9.0

    Working Temperature: +5~+40

     

    5 In 1 Soil Meter

    ​

    It does not need a power source, and it has 5 functions in one. It can measure soil temperature/humidity, PH value, plant photosynthetic luminosity and environmental humidity.

    Measure the moisture, temperature, PH of the soil in the pot and the intensity of sunlight needed by the plant for photosynthesis.

    Easy to use, good quality.

     

    Specifications:

     

    Material: plastic

    Size :3*6*29cm/1.18*2.36*11.42"

    Probe length: 20cm/7.87"

    Battery: 1 X 9V battery (Not included)

     
  Notes:
   
  1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
  2. Please allow 1-3cm measuring deviation due to manual measurement.
   
•  

Package Included:

• 1 x Digital PH Meter Soil Moisture Monitor （Battery Not Include）
•  
• 
• 
• 
• 
• 
• 
•