DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supp

DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver

brand: DIYTECH SKU:DT2551-03

$15.69

Description£º

Module name: 600W boost constant current module
Module Properties: Non-Isolated Boost Module (BOOST)
Input voltage: DC10V-60V
Input current: 10 (MAX)
Static operating current: 10mA (12V 20V, the higher the output voltage, static too much)
Output voltage: 12-60V continuously adjustable (default output 19V shipment, other voltage please pay attention to the dispensers)
Output current: 10A or more 6A Please strengthen the heat dissipation (The larger the difference between the input and output pressure, the smaller the output current)
Constant current range: 0.2-10A
Output power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W,
Operating temperature: -40 to + 85 degrees (enhance heat dissipation if the ambient temperature is too high)
Operating frequency: 150KHz
Conversion efficiency: 92%-96% (efficiency is related to input, output voltage, current, pressure)
Input reverse protection: No (Note that forward and reverse are not reversed)
Installation: 4 3mm screw holes
Wiring method: wiring output
Module size: length 85mm width 52mm height 21mm
Module weight: 80 grams

The output voltage regulation:
1. Adjust the CV-ADJ potentiometer and set the output voltage to your desired voltage based on your battery or LED. Clockwise voltage is very small, counterclockwise adjustable the output current regulation:
?2. Turn the CC-ADJ potentiometer clockwise for about 20 turns. Set the output current to the minimum value and connect it to the LED, CC-ADJ potentiometer to the required current. For charging the battery, place the battery after the charge is complete, then receive the output and adjust the CC-ADJ to the current you need. (For the full charge of the battery, it must be used for charging, because the more charge remaining in the battery, the smaller the charging current.)

Note: Do not use short circuit to adjust the current. The boost module circuit structure cannot be adjusted by short circuit.

Package Included:
1 x 600W 10A DC Converter Step-up Converter

Batch

3pcs 10pcs

Quantity

guaranteeQuality checked
Special gift cardsSpecial gift cards
Free return Within 60 days
Consultancyservice@diytech.cc

Description

Description£º

Module name: 600W boost constant current module
Module Properties: Non-Isolated Boost Module (BOOST)
Input voltage: DC10V-60V
Input current: 10 (MAX)
Static operating current: 10mA (12V 20V, the higher the output voltage, static too much)
Output voltage: 12-60V continuously adjustable (default output 19V shipment, other voltage please pay attention to the dispensers)
Output current: 10A or more 6A Please strengthen the heat dissipation (The larger the difference between the input and output pressure, the smaller the output current)
Constant current range: 0.2-10A
Output power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W,
Operating temperature: -40 to + 85 degrees (enhance heat dissipation if the ambient temperature is too high)
Operating frequency: 150KHz
Conversion efficiency: 92%-96% (efficiency is related to input, output voltage, current, pressure)
Input reverse protection: No (Note that forward and reverse are not reversed)
Installation: 4 3mm screw holes
Wiring method: wiring output
Module size: length 85mm width 52mm height 21mm
Module weight: 80 grams

Manual

Other Customers also buy:

DC 5V-400V 900V 1000V Input Voltage DC 6V-12V Converter Step Up Boost Module

$5.99
{"id":4518044631127,"title":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver","handle":"dc10v-60v-600w-10a-converter-step-up-boost-constant-current-power-supply-driver","description":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModule name: 600W boost constant current module\u003c\/li\u003e\n\u003cli\u003eModule Properties: Non-Isolated Boost Module (BOOST)\u003c\/li\u003e\n\u003cli\u003eInput voltage: DC10V-60V\u003c\/li\u003e\n\u003cli\u003eInput current: 10 (MAX)\u003c\/li\u003e\n\u003cli\u003eStatic operating current: 10mA (12V 20V, the higher the output voltage, static too much)\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 12-60V continuously adjustable (default output 19V shipment, other voltage please pay attention to the dispensers)\u003c\/li\u003e\n\u003cli\u003eOutput current: 10A or more 6A Please strengthen the heat dissipation (The larger the difference between the input and output pressure, the smaller the output current)\u003c\/li\u003e\n\u003cli\u003eConstant current range: 0.2-10A\u003c\/li\u003e\n\u003cli\u003eOutput power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W,\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to + 85 degrees (enhance heat dissipation if the ambient temperature is too high)\u003c\/li\u003e\n\u003cli\u003eOperating frequency: 150KHz\u003c\/li\u003e\n\u003cli\u003eConversion efficiency: 92%-96% (efficiency is related to input, output voltage, current, pressure)\u003c\/li\u003e\n\u003cli\u003eInput reverse protection: No (Note that forward and reverse are not reversed)\u003c\/li\u003e\n\u003cli\u003eInstallation: 4 3mm screw holes\u003c\/li\u003e\n\u003cli\u003eWiring method: wiring output\u003c\/li\u003e\n\u003cli\u003eModule size: length 85mm width 52mm height 21mm\u003c\/li\u003e\n\u003cli\u003eModule weight: 80 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eThe output voltage regulation:\u003c\/strong\u003e\u003cbr\u003e1. Adjust the CV-ADJ potentiometer and set the output voltage to your desired voltage based on your battery or LED. Clockwise voltage is very small, counterclockwise adjustable the output current regulation:\u003cbr\u003e?2. Turn the CC-ADJ potentiometer clockwise for about 20 turns. Set the output current to the minimum value and connect it to the LED, CC-ADJ potentiometer to the required current. For charging the battery, place the battery after the charge is complete, then receive the output and adjust the CC-ADJ to the current you need. (For the full charge of the battery, it must be used for charging, because the more charge remaining in the battery, the smaller the charging current.)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: Do not use short circuit to adjust the current. The boost module circuit structure cannot be adjusted by short circuit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 600W 10A DC Converter Step-up Converter","published_at":"2020-05-20T02:54:46+08:00","created_at":"2020-05-20T02:54:48+08:00","vendor":"DIYTECH","type":"Step Up\/Down Module","tags":[],"price":1569,"price_min":1569,"price_max":4655,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179564806231,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT2551-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver - 3pcs","public_title":"3pcs","options":["3pcs"],"price":1569,"weight":234,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179564838999,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT2551-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver - 10pcs","public_title":"10pcs","options":["10pcs"],"price":4655,"weight":780,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020","options":["Batch"],"media":[{"alt":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver","id":6257479155799,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModule name: 600W boost constant current module\u003c\/li\u003e\n\u003cli\u003eModule Properties: Non-Isolated Boost Module (BOOST)\u003c\/li\u003e\n\u003cli\u003eInput voltage: DC10V-60V\u003c\/li\u003e\n\u003cli\u003eInput current: 10 (MAX)\u003c\/li\u003e\n\u003cli\u003eStatic operating current: 10mA (12V 20V, the higher the output voltage, static too much)\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 12-60V continuously adjustable (default output 19V shipment, other voltage please pay attention to the dispensers)\u003c\/li\u003e\n\u003cli\u003eOutput current: 10A or more 6A Please strengthen the heat dissipation (The larger the difference between the input and output pressure, the smaller the output current)\u003c\/li\u003e\n\u003cli\u003eConstant current range: 0.2-10A\u003c\/li\u003e\n\u003cli\u003eOutput power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W,\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to + 85 degrees (enhance heat dissipation if the ambient temperature is too high)\u003c\/li\u003e\n\u003cli\u003eOperating frequency: 150KHz\u003c\/li\u003e\n\u003cli\u003eConversion efficiency: 92%-96% (efficiency is related to input, output voltage, current, pressure)\u003c\/li\u003e\n\u003cli\u003eInput reverse protection: No (Note that forward and reverse are not reversed)\u003c\/li\u003e\n\u003cli\u003eInstallation: 4 3mm screw holes\u003c\/li\u003e\n\u003cli\u003eWiring method: wiring output\u003c\/li\u003e\n\u003cli\u003eModule size: length 85mm width 52mm height 21mm\u003c\/li\u003e\n\u003cli\u003eModule weight: 80 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eThe output voltage regulation:\u003c\/strong\u003e\u003cbr\u003e1. Adjust the CV-ADJ potentiometer and set the output voltage to your desired voltage based on your battery or LED. Clockwise voltage is very small, counterclockwise adjustable the output current regulation:\u003cbr\u003e?2. Turn the CC-ADJ potentiometer clockwise for about 20 turns. Set the output current to the minimum value and connect it to the LED, CC-ADJ potentiometer to the required current. For charging the battery, place the battery after the charge is complete, then receive the output and adjust the CC-ADJ to the current you need. (For the full charge of the battery, it must be used for charging, because the more charge remaining in the battery, the smaller the charging current.)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: Do not use short circuit to adjust the current. The boost module circuit structure cannot be adjusted by short circuit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 600W 10A DC Converter Step-up Converter"}
6-24V 24V 12V to 5V USB Step Down Module

$2.69
{"id":4518044631127,"title":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver","handle":"dc10v-60v-600w-10a-converter-step-up-boost-constant-current-power-supply-driver","description":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModule name: 600W boost constant current module\u003c\/li\u003e\n\u003cli\u003eModule Properties: Non-Isolated Boost Module (BOOST)\u003c\/li\u003e\n\u003cli\u003eInput voltage: DC10V-60V\u003c\/li\u003e\n\u003cli\u003eInput current: 10 (MAX)\u003c\/li\u003e\n\u003cli\u003eStatic operating current: 10mA (12V 20V, the higher the output voltage, static too much)\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 12-60V continuously adjustable (default output 19V shipment, other voltage please pay attention to the dispensers)\u003c\/li\u003e\n\u003cli\u003eOutput current: 10A or more 6A Please strengthen the heat dissipation (The larger the difference between the input and output pressure, the smaller the output current)\u003c\/li\u003e\n\u003cli\u003eConstant current range: 0.2-10A\u003c\/li\u003e\n\u003cli\u003eOutput power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W,\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to + 85 degrees (enhance heat dissipation if the ambient temperature is too high)\u003c\/li\u003e\n\u003cli\u003eOperating frequency: 150KHz\u003c\/li\u003e\n\u003cli\u003eConversion efficiency: 92%-96% (efficiency is related to input, output voltage, current, pressure)\u003c\/li\u003e\n\u003cli\u003eInput reverse protection: No (Note that forward and reverse are not reversed)\u003c\/li\u003e\n\u003cli\u003eInstallation: 4 3mm screw holes\u003c\/li\u003e\n\u003cli\u003eWiring method: wiring output\u003c\/li\u003e\n\u003cli\u003eModule size: length 85mm width 52mm height 21mm\u003c\/li\u003e\n\u003cli\u003eModule weight: 80 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eThe output voltage regulation:\u003c\/strong\u003e\u003cbr\u003e1. Adjust the CV-ADJ potentiometer and set the output voltage to your desired voltage based on your battery or LED. Clockwise voltage is very small, counterclockwise adjustable the output current regulation:\u003cbr\u003e?2. Turn the CC-ADJ potentiometer clockwise for about 20 turns. Set the output current to the minimum value and connect it to the LED, CC-ADJ potentiometer to the required current. For charging the battery, place the battery after the charge is complete, then receive the output and adjust the CC-ADJ to the current you need. (For the full charge of the battery, it must be used for charging, because the more charge remaining in the battery, the smaller the charging current.)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: Do not use short circuit to adjust the current. The boost module circuit structure cannot be adjusted by short circuit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 600W 10A DC Converter Step-up Converter","published_at":"2020-05-20T02:54:46+08:00","created_at":"2020-05-20T02:54:48+08:00","vendor":"DIYTECH","type":"Step Up\/Down Module","tags":[],"price":1569,"price_min":1569,"price_max":4655,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179564806231,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT2551-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver - 3pcs","public_title":"3pcs","options":["3pcs"],"price":1569,"weight":234,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179564838999,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT2551-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver - 10pcs","public_title":"10pcs","options":["10pcs"],"price":4655,"weight":780,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020","options":["Batch"],"media":[{"alt":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver","id":6257479155799,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModule name: 600W boost constant current module\u003c\/li\u003e\n\u003cli\u003eModule Properties: Non-Isolated Boost Module (BOOST)\u003c\/li\u003e\n\u003cli\u003eInput voltage: DC10V-60V\u003c\/li\u003e\n\u003cli\u003eInput current: 10 (MAX)\u003c\/li\u003e\n\u003cli\u003eStatic operating current: 10mA (12V 20V, the higher the output voltage, static too much)\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 12-60V continuously adjustable (default output 19V shipment, other voltage please pay attention to the dispensers)\u003c\/li\u003e\n\u003cli\u003eOutput current: 10A or more 6A Please strengthen the heat dissipation (The larger the difference between the input and output pressure, the smaller the output current)\u003c\/li\u003e\n\u003cli\u003eConstant current range: 0.2-10A\u003c\/li\u003e\n\u003cli\u003eOutput power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W,\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to + 85 degrees (enhance heat dissipation if the ambient temperature is too high)\u003c\/li\u003e\n\u003cli\u003eOperating frequency: 150KHz\u003c\/li\u003e\n\u003cli\u003eConversion efficiency: 92%-96% (efficiency is related to input, output voltage, current, pressure)\u003c\/li\u003e\n\u003cli\u003eInput reverse protection: No (Note that forward and reverse are not reversed)\u003c\/li\u003e\n\u003cli\u003eInstallation: 4 3mm screw holes\u003c\/li\u003e\n\u003cli\u003eWiring method: wiring output\u003c\/li\u003e\n\u003cli\u003eModule size: length 85mm width 52mm height 21mm\u003c\/li\u003e\n\u003cli\u003eModule weight: 80 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eThe output voltage regulation:\u003c\/strong\u003e\u003cbr\u003e1. Adjust the CV-ADJ potentiometer and set the output voltage to your desired voltage based on your battery or LED. Clockwise voltage is very small, counterclockwise adjustable the output current regulation:\u003cbr\u003e?2. Turn the CC-ADJ potentiometer clockwise for about 20 turns. Set the output current to the minimum value and connect it to the LED, CC-ADJ potentiometer to the required current. For charging the battery, place the battery after the charge is complete, then receive the output and adjust the CC-ADJ to the current you need. (For the full charge of the battery, it must be used for charging, because the more charge remaining in the battery, the smaller the charging current.)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: Do not use short circuit to adjust the current. The boost module circuit structure cannot be adjusted by short circuit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 600W 10A DC Converter Step-up Converter"}
DC 15~26V Adjustable Voltage Current Signal Generator Analog Simulator Output

$43.95
{"id":4518044631127,"title":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver","handle":"dc10v-60v-600w-10a-converter-step-up-boost-constant-current-power-supply-driver","description":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModule name: 600W boost constant current module\u003c\/li\u003e\n\u003cli\u003eModule Properties: Non-Isolated Boost Module (BOOST)\u003c\/li\u003e\n\u003cli\u003eInput voltage: DC10V-60V\u003c\/li\u003e\n\u003cli\u003eInput current: 10 (MAX)\u003c\/li\u003e\n\u003cli\u003eStatic operating current: 10mA (12V 20V, the higher the output voltage, static too much)\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 12-60V continuously adjustable (default output 19V shipment, other voltage please pay attention to the dispensers)\u003c\/li\u003e\n\u003cli\u003eOutput current: 10A or more 6A Please strengthen the heat dissipation (The larger the difference between the input and output pressure, the smaller the output current)\u003c\/li\u003e\n\u003cli\u003eConstant current range: 0.2-10A\u003c\/li\u003e\n\u003cli\u003eOutput power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W,\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to + 85 degrees (enhance heat dissipation if the ambient temperature is too high)\u003c\/li\u003e\n\u003cli\u003eOperating frequency: 150KHz\u003c\/li\u003e\n\u003cli\u003eConversion efficiency: 92%-96% (efficiency is related to input, output voltage, current, pressure)\u003c\/li\u003e\n\u003cli\u003eInput reverse protection: No (Note that forward and reverse are not reversed)\u003c\/li\u003e\n\u003cli\u003eInstallation: 4 3mm screw holes\u003c\/li\u003e\n\u003cli\u003eWiring method: wiring output\u003c\/li\u003e\n\u003cli\u003eModule size: length 85mm width 52mm height 21mm\u003c\/li\u003e\n\u003cli\u003eModule weight: 80 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eThe output voltage regulation:\u003c\/strong\u003e\u003cbr\u003e1. Adjust the CV-ADJ potentiometer and set the output voltage to your desired voltage based on your battery or LED. Clockwise voltage is very small, counterclockwise adjustable the output current regulation:\u003cbr\u003e?2. Turn the CC-ADJ potentiometer clockwise for about 20 turns. Set the output current to the minimum value and connect it to the LED, CC-ADJ potentiometer to the required current. For charging the battery, place the battery after the charge is complete, then receive the output and adjust the CC-ADJ to the current you need. (For the full charge of the battery, it must be used for charging, because the more charge remaining in the battery, the smaller the charging current.)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: Do not use short circuit to adjust the current. The boost module circuit structure cannot be adjusted by short circuit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 600W 10A DC Converter Step-up Converter","published_at":"2020-05-20T02:54:46+08:00","created_at":"2020-05-20T02:54:48+08:00","vendor":"DIYTECH","type":"Step Up\/Down Module","tags":[],"price":1569,"price_min":1569,"price_max":4655,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179564806231,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT2551-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver - 3pcs","public_title":"3pcs","options":["3pcs"],"price":1569,"weight":234,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179564838999,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT2551-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver - 10pcs","public_title":"10pcs","options":["10pcs"],"price":4655,"weight":780,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020","options":["Batch"],"media":[{"alt":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver","id":6257479155799,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModule name: 600W boost constant current module\u003c\/li\u003e\n\u003cli\u003eModule Properties: Non-Isolated Boost Module (BOOST)\u003c\/li\u003e\n\u003cli\u003eInput voltage: DC10V-60V\u003c\/li\u003e\n\u003cli\u003eInput current: 10 (MAX)\u003c\/li\u003e\n\u003cli\u003eStatic operating current: 10mA (12V 20V, the higher the output voltage, static too much)\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 12-60V continuously adjustable (default output 19V shipment, other voltage please pay attention to the dispensers)\u003c\/li\u003e\n\u003cli\u003eOutput current: 10A or more 6A Please strengthen the heat dissipation (The larger the difference between the input and output pressure, the smaller the output current)\u003c\/li\u003e\n\u003cli\u003eConstant current range: 0.2-10A\u003c\/li\u003e\n\u003cli\u003eOutput power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W,\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to + 85 degrees (enhance heat dissipation if the ambient temperature is too high)\u003c\/li\u003e\n\u003cli\u003eOperating frequency: 150KHz\u003c\/li\u003e\n\u003cli\u003eConversion efficiency: 92%-96% (efficiency is related to input, output voltage, current, pressure)\u003c\/li\u003e\n\u003cli\u003eInput reverse protection: No (Note that forward and reverse are not reversed)\u003c\/li\u003e\n\u003cli\u003eInstallation: 4 3mm screw holes\u003c\/li\u003e\n\u003cli\u003eWiring method: wiring output\u003c\/li\u003e\n\u003cli\u003eModule size: length 85mm width 52mm height 21mm\u003c\/li\u003e\n\u003cli\u003eModule weight: 80 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eThe output voltage regulation:\u003c\/strong\u003e\u003cbr\u003e1. Adjust the CV-ADJ potentiometer and set the output voltage to your desired voltage based on your battery or LED. Clockwise voltage is very small, counterclockwise adjustable the output current regulation:\u003cbr\u003e?2. Turn the CC-ADJ potentiometer clockwise for about 20 turns. Set the output current to the minimum value and connect it to the LED, CC-ADJ potentiometer to the required current. For charging the battery, place the battery after the charge is complete, then receive the output and adjust the CC-ADJ to the current you need. (For the full charge of the battery, it must be used for charging, because the more charge remaining in the battery, the smaller the charging current.)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: Do not use short circuit to adjust the current. The boost module circuit structure cannot be adjusted by short circuit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 600W 10A DC Converter Step-up Converter"}
1.2-32V 5A Constant Voltage Current LCD Digital Voltage Current Display Adjustable Buck Step Down Power Supply Module With Case

$4.74
{"id":4518044631127,"title":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver","handle":"dc10v-60v-600w-10a-converter-step-up-boost-constant-current-power-supply-driver","description":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModule name: 600W boost constant current module\u003c\/li\u003e\n\u003cli\u003eModule Properties: Non-Isolated Boost Module (BOOST)\u003c\/li\u003e\n\u003cli\u003eInput voltage: DC10V-60V\u003c\/li\u003e\n\u003cli\u003eInput current: 10 (MAX)\u003c\/li\u003e\n\u003cli\u003eStatic operating current: 10mA (12V 20V, the higher the output voltage, static too much)\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 12-60V continuously adjustable (default output 19V shipment, other voltage please pay attention to the dispensers)\u003c\/li\u003e\n\u003cli\u003eOutput current: 10A or more 6A Please strengthen the heat dissipation (The larger the difference between the input and output pressure, the smaller the output current)\u003c\/li\u003e\n\u003cli\u003eConstant current range: 0.2-10A\u003c\/li\u003e\n\u003cli\u003eOutput power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W,\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to + 85 degrees (enhance heat dissipation if the ambient temperature is too high)\u003c\/li\u003e\n\u003cli\u003eOperating frequency: 150KHz\u003c\/li\u003e\n\u003cli\u003eConversion efficiency: 92%-96% (efficiency is related to input, output voltage, current, pressure)\u003c\/li\u003e\n\u003cli\u003eInput reverse protection: No (Note that forward and reverse are not reversed)\u003c\/li\u003e\n\u003cli\u003eInstallation: 4 3mm screw holes\u003c\/li\u003e\n\u003cli\u003eWiring method: wiring output\u003c\/li\u003e\n\u003cli\u003eModule size: length 85mm width 52mm height 21mm\u003c\/li\u003e\n\u003cli\u003eModule weight: 80 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eThe output voltage regulation:\u003c\/strong\u003e\u003cbr\u003e1. Adjust the CV-ADJ potentiometer and set the output voltage to your desired voltage based on your battery or LED. Clockwise voltage is very small, counterclockwise adjustable the output current regulation:\u003cbr\u003e?2. Turn the CC-ADJ potentiometer clockwise for about 20 turns. Set the output current to the minimum value and connect it to the LED, CC-ADJ potentiometer to the required current. For charging the battery, place the battery after the charge is complete, then receive the output and adjust the CC-ADJ to the current you need. (For the full charge of the battery, it must be used for charging, because the more charge remaining in the battery, the smaller the charging current.)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: Do not use short circuit to adjust the current. The boost module circuit structure cannot be adjusted by short circuit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 600W 10A DC Converter Step-up Converter","published_at":"2020-05-20T02:54:46+08:00","created_at":"2020-05-20T02:54:48+08:00","vendor":"DIYTECH","type":"Step Up\/Down Module","tags":[],"price":1569,"price_min":1569,"price_max":4655,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179564806231,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT2551-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver - 3pcs","public_title":"3pcs","options":["3pcs"],"price":1569,"weight":234,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179564838999,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT2551-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver - 10pcs","public_title":"10pcs","options":["10pcs"],"price":4655,"weight":780,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020","options":["Batch"],"media":[{"alt":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver","id":6257479155799,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModule name: 600W boost constant current module\u003c\/li\u003e\n\u003cli\u003eModule Properties: Non-Isolated Boost Module (BOOST)\u003c\/li\u003e\n\u003cli\u003eInput voltage: DC10V-60V\u003c\/li\u003e\n\u003cli\u003eInput current: 10 (MAX)\u003c\/li\u003e\n\u003cli\u003eStatic operating current: 10mA (12V 20V, the higher the output voltage, static too much)\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 12-60V continuously adjustable (default output 19V shipment, other voltage please pay attention to the dispensers)\u003c\/li\u003e\n\u003cli\u003eOutput current: 10A or more 6A Please strengthen the heat dissipation (The larger the difference between the input and output pressure, the smaller the output current)\u003c\/li\u003e\n\u003cli\u003eConstant current range: 0.2-10A\u003c\/li\u003e\n\u003cli\u003eOutput power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W,\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to + 85 degrees (enhance heat dissipation if the ambient temperature is too high)\u003c\/li\u003e\n\u003cli\u003eOperating frequency: 150KHz\u003c\/li\u003e\n\u003cli\u003eConversion efficiency: 92%-96% (efficiency is related to input, output voltage, current, pressure)\u003c\/li\u003e\n\u003cli\u003eInput reverse protection: No (Note that forward and reverse are not reversed)\u003c\/li\u003e\n\u003cli\u003eInstallation: 4 3mm screw holes\u003c\/li\u003e\n\u003cli\u003eWiring method: wiring output\u003c\/li\u003e\n\u003cli\u003eModule size: length 85mm width 52mm height 21mm\u003c\/li\u003e\n\u003cli\u003eModule weight: 80 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eThe output voltage regulation:\u003c\/strong\u003e\u003cbr\u003e1. Adjust the CV-ADJ potentiometer and set the output voltage to your desired voltage based on your battery or LED. Clockwise voltage is very small, counterclockwise adjustable the output current regulation:\u003cbr\u003e?2. Turn the CC-ADJ potentiometer clockwise for about 20 turns. Set the output current to the minimum value and connect it to the LED, CC-ADJ potentiometer to the required current. For charging the battery, place the battery after the charge is complete, then receive the output and adjust the CC-ADJ to the current you need. (For the full charge of the battery, it must be used for charging, because the more charge remaining in the battery, the smaller the charging current.)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: Do not use short circuit to adjust the current. The boost module circuit structure cannot be adjusted by short circuit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 600W 10A DC Converter Step-up Converter"}
DC 12V 400mA AC-DC Supply Buck Converter Step Down Board Module Convertible Adaptor Board Short Circuit Protection

$3.99
{"id":4518044631127,"title":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver","handle":"dc10v-60v-600w-10a-converter-step-up-boost-constant-current-power-supply-driver","description":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModule name: 600W boost constant current module\u003c\/li\u003e\n\u003cli\u003eModule Properties: Non-Isolated Boost Module (BOOST)\u003c\/li\u003e\n\u003cli\u003eInput voltage: DC10V-60V\u003c\/li\u003e\n\u003cli\u003eInput current: 10 (MAX)\u003c\/li\u003e\n\u003cli\u003eStatic operating current: 10mA (12V 20V, the higher the output voltage, static too much)\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 12-60V continuously adjustable (default output 19V shipment, other voltage please pay attention to the dispensers)\u003c\/li\u003e\n\u003cli\u003eOutput current: 10A or more 6A Please strengthen the heat dissipation (The larger the difference between the input and output pressure, the smaller the output current)\u003c\/li\u003e\n\u003cli\u003eConstant current range: 0.2-10A\u003c\/li\u003e\n\u003cli\u003eOutput power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W,\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to + 85 degrees (enhance heat dissipation if the ambient temperature is too high)\u003c\/li\u003e\n\u003cli\u003eOperating frequency: 150KHz\u003c\/li\u003e\n\u003cli\u003eConversion efficiency: 92%-96% (efficiency is related to input, output voltage, current, pressure)\u003c\/li\u003e\n\u003cli\u003eInput reverse protection: No (Note that forward and reverse are not reversed)\u003c\/li\u003e\n\u003cli\u003eInstallation: 4 3mm screw holes\u003c\/li\u003e\n\u003cli\u003eWiring method: wiring output\u003c\/li\u003e\n\u003cli\u003eModule size: length 85mm width 52mm height 21mm\u003c\/li\u003e\n\u003cli\u003eModule weight: 80 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eThe output voltage regulation:\u003c\/strong\u003e\u003cbr\u003e1. Adjust the CV-ADJ potentiometer and set the output voltage to your desired voltage based on your battery or LED. Clockwise voltage is very small, counterclockwise adjustable the output current regulation:\u003cbr\u003e?2. Turn the CC-ADJ potentiometer clockwise for about 20 turns. Set the output current to the minimum value and connect it to the LED, CC-ADJ potentiometer to the required current. For charging the battery, place the battery after the charge is complete, then receive the output and adjust the CC-ADJ to the current you need. (For the full charge of the battery, it must be used for charging, because the more charge remaining in the battery, the smaller the charging current.)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: Do not use short circuit to adjust the current. The boost module circuit structure cannot be adjusted by short circuit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 600W 10A DC Converter Step-up Converter","published_at":"2020-05-20T02:54:46+08:00","created_at":"2020-05-20T02:54:48+08:00","vendor":"DIYTECH","type":"Step Up\/Down Module","tags":[],"price":1569,"price_min":1569,"price_max":4655,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179564806231,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT2551-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver - 3pcs","public_title":"3pcs","options":["3pcs"],"price":1569,"weight":234,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179564838999,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT2551-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver - 10pcs","public_title":"10pcs","options":["10pcs"],"price":4655,"weight":780,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020","options":["Batch"],"media":[{"alt":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver","id":6257479155799,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModule name: 600W boost constant current module\u003c\/li\u003e\n\u003cli\u003eModule Properties: Non-Isolated Boost Module (BOOST)\u003c\/li\u003e\n\u003cli\u003eInput voltage: DC10V-60V\u003c\/li\u003e\n\u003cli\u003eInput current: 10 (MAX)\u003c\/li\u003e\n\u003cli\u003eStatic operating current: 10mA (12V 20V, the higher the output voltage, static too much)\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 12-60V continuously adjustable (default output 19V shipment, other voltage please pay attention to the dispensers)\u003c\/li\u003e\n\u003cli\u003eOutput current: 10A or more 6A Please strengthen the heat dissipation (The larger the difference between the input and output pressure, the smaller the output current)\u003c\/li\u003e\n\u003cli\u003eConstant current range: 0.2-10A\u003c\/li\u003e\n\u003cli\u003eOutput power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W,\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to + 85 degrees (enhance heat dissipation if the ambient temperature is too high)\u003c\/li\u003e\n\u003cli\u003eOperating frequency: 150KHz\u003c\/li\u003e\n\u003cli\u003eConversion efficiency: 92%-96% (efficiency is related to input, output voltage, current, pressure)\u003c\/li\u003e\n\u003cli\u003eInput reverse protection: No (Note that forward and reverse are not reversed)\u003c\/li\u003e\n\u003cli\u003eInstallation: 4 3mm screw holes\u003c\/li\u003e\n\u003cli\u003eWiring method: wiring output\u003c\/li\u003e\n\u003cli\u003eModule size: length 85mm width 52mm height 21mm\u003c\/li\u003e\n\u003cli\u003eModule weight: 80 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eThe output voltage regulation:\u003c\/strong\u003e\u003cbr\u003e1. Adjust the CV-ADJ potentiometer and set the output voltage to your desired voltage based on your battery or LED. Clockwise voltage is very small, counterclockwise adjustable the output current regulation:\u003cbr\u003e?2. Turn the CC-ADJ potentiometer clockwise for about 20 turns. Set the output current to the minimum value and connect it to the LED, CC-ADJ potentiometer to the required current. For charging the battery, place the battery after the charge is complete, then receive the output and adjust the CC-ADJ to the current you need. (For the full charge of the battery, it must be used for charging, because the more charge remaining in the battery, the smaller the charging current.)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: Do not use short circuit to adjust the current. The boost module circuit structure cannot be adjusted by short circuit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 600W 10A DC Converter Step-up Converter"}
5V 2.1A Out UPS Mobile Power Diy Board Charger Step Up DC DC Converter Boost Module For 3.7V 18650 Lithium Battery

$6.99
{"id":4518044631127,"title":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver","handle":"dc10v-60v-600w-10a-converter-step-up-boost-constant-current-power-supply-driver","description":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModule name: 600W boost constant current module\u003c\/li\u003e\n\u003cli\u003eModule Properties: Non-Isolated Boost Module (BOOST)\u003c\/li\u003e\n\u003cli\u003eInput voltage: DC10V-60V\u003c\/li\u003e\n\u003cli\u003eInput current: 10 (MAX)\u003c\/li\u003e\n\u003cli\u003eStatic operating current: 10mA (12V 20V, the higher the output voltage, static too much)\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 12-60V continuously adjustable (default output 19V shipment, other voltage please pay attention to the dispensers)\u003c\/li\u003e\n\u003cli\u003eOutput current: 10A or more 6A Please strengthen the heat dissipation (The larger the difference between the input and output pressure, the smaller the output current)\u003c\/li\u003e\n\u003cli\u003eConstant current range: 0.2-10A\u003c\/li\u003e\n\u003cli\u003eOutput power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W,\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to + 85 degrees (enhance heat dissipation if the ambient temperature is too high)\u003c\/li\u003e\n\u003cli\u003eOperating frequency: 150KHz\u003c\/li\u003e\n\u003cli\u003eConversion efficiency: 92%-96% (efficiency is related to input, output voltage, current, pressure)\u003c\/li\u003e\n\u003cli\u003eInput reverse protection: No (Note that forward and reverse are not reversed)\u003c\/li\u003e\n\u003cli\u003eInstallation: 4 3mm screw holes\u003c\/li\u003e\n\u003cli\u003eWiring method: wiring output\u003c\/li\u003e\n\u003cli\u003eModule size: length 85mm width 52mm height 21mm\u003c\/li\u003e\n\u003cli\u003eModule weight: 80 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eThe output voltage regulation:\u003c\/strong\u003e\u003cbr\u003e1. Adjust the CV-ADJ potentiometer and set the output voltage to your desired voltage based on your battery or LED. Clockwise voltage is very small, counterclockwise adjustable the output current regulation:\u003cbr\u003e?2. Turn the CC-ADJ potentiometer clockwise for about 20 turns. Set the output current to the minimum value and connect it to the LED, CC-ADJ potentiometer to the required current. For charging the battery, place the battery after the charge is complete, then receive the output and adjust the CC-ADJ to the current you need. (For the full charge of the battery, it must be used for charging, because the more charge remaining in the battery, the smaller the charging current.)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: Do not use short circuit to adjust the current. The boost module circuit structure cannot be adjusted by short circuit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 600W 10A DC Converter Step-up Converter","published_at":"2020-05-20T02:54:46+08:00","created_at":"2020-05-20T02:54:48+08:00","vendor":"DIYTECH","type":"Step Up\/Down Module","tags":[],"price":1569,"price_min":1569,"price_max":4655,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179564806231,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT2551-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver - 3pcs","public_title":"3pcs","options":["3pcs"],"price":1569,"weight":234,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179564838999,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT2551-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver - 10pcs","public_title":"10pcs","options":["10pcs"],"price":4655,"weight":780,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020","options":["Batch"],"media":[{"alt":"DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver","id":6257479155799,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1525252529_A45I6.jpg?v=1592420020","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModule name: 600W boost constant current module\u003c\/li\u003e\n\u003cli\u003eModule Properties: Non-Isolated Boost Module (BOOST)\u003c\/li\u003e\n\u003cli\u003eInput voltage: DC10V-60V\u003c\/li\u003e\n\u003cli\u003eInput current: 10 (MAX)\u003c\/li\u003e\n\u003cli\u003eStatic operating current: 10mA (12V 20V, the higher the output voltage, static too much)\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 12-60V continuously adjustable (default output 19V shipment, other voltage please pay attention to the dispensers)\u003c\/li\u003e\n\u003cli\u003eOutput current: 10A or more 6A Please strengthen the heat dissipation (The larger the difference between the input and output pressure, the smaller the output current)\u003c\/li\u003e\n\u003cli\u003eConstant current range: 0.2-10A\u003c\/li\u003e\n\u003cli\u003eOutput power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W,\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to + 85 degrees (enhance heat dissipation if the ambient temperature is too high)\u003c\/li\u003e\n\u003cli\u003eOperating frequency: 150KHz\u003c\/li\u003e\n\u003cli\u003eConversion efficiency: 92%-96% (efficiency is related to input, output voltage, current, pressure)\u003c\/li\u003e\n\u003cli\u003eInput reverse protection: No (Note that forward and reverse are not reversed)\u003c\/li\u003e\n\u003cli\u003eInstallation: 4 3mm screw holes\u003c\/li\u003e\n\u003cli\u003eWiring method: wiring output\u003c\/li\u003e\n\u003cli\u003eModule size: length 85mm width 52mm height 21mm\u003c\/li\u003e\n\u003cli\u003eModule weight: 80 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eThe output voltage regulation:\u003c\/strong\u003e\u003cbr\u003e1. Adjust the CV-ADJ potentiometer and set the output voltage to your desired voltage based on your battery or LED. Clockwise voltage is very small, counterclockwise adjustable the output current regulation:\u003cbr\u003e?2. Turn the CC-ADJ potentiometer clockwise for about 20 turns. Set the output current to the minimum value and connect it to the LED, CC-ADJ potentiometer to the required current. For charging the battery, place the battery after the charge is complete, then receive the output and adjust the CC-ADJ to the current you need. (For the full charge of the battery, it must be used for charging, because the more charge remaining in the battery, the smaller the charging current.)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: Do not use short circuit to adjust the current. The boost module circuit structure cannot be adjusted by short circuit.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 600W 10A DC Converter Step-up Converter"}

Compare Box
Images
Name
Price
Vendor
Type
Variant
Available
Remove
Detail

DC10V-60V 600W 10A Converter Step-up Boost Constant Current Power Supply Driver

Login

Reset your password

Register