BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module

BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi

brand: DIYTECH SKU:DT202-03

$1.27

The BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.
Using a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.
The BMP180 comes fully calibrated and ready to use.
As the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.
Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.

Features:

The BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?
It follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.
The ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?
BMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.

Applications:

Indoor navigation?
GPS-enhancement for dead-reckoning, slope detection, etc.
Sport devices, e.g. altitude profile
Weather forecast
Vertical velocity indication (rise/sink speed)

Package Included:

1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino

Batch

3pcs 10pcs

Quantity

guaranteeQuality checked
Special gift cardsSpecial gift cards
Free return Within 60 days
Consultancyservice@diytech.cc

Description

The BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.
Using a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.
The BMP180 comes fully calibrated and ready to use.
As the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.
Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.

Manual

Other Customers also buy:

TDS sensor module for Arduino Quality Monitoring Metal Water Conductivity Simulation

$12.99
{"id":4518068027479,"title":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","handle":"diymore-bmp180-digital-temperature-barometric-pressure-sensor-altitude-module-replace-bmp085-digital-measures-air-pressure-sensor-for-arduino-raspberry-pi","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2020-05-20T03:07:35+08:00","created_at":"2020-05-20T03:07:38+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Raspberry Pi"],"price":127,"price_min":127,"price_max":377,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179580534871,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT202-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 3pcs","public_title":"3pcs","options":["3pcs"],"price":127,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179580567639,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT202-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 10pcs","public_title":"10pcs","options":["10pcs"],"price":377,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","options":["Batch"],"media":[{"alt":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","id":6257547640919,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
XH-M203 Water Level Controller

$3.79
{"id":4518068027479,"title":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","handle":"diymore-bmp180-digital-temperature-barometric-pressure-sensor-altitude-module-replace-bmp085-digital-measures-air-pressure-sensor-for-arduino-raspberry-pi","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2020-05-20T03:07:35+08:00","created_at":"2020-05-20T03:07:38+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Raspberry Pi"],"price":127,"price_min":127,"price_max":377,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179580534871,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT202-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 3pcs","public_title":"3pcs","options":["3pcs"],"price":127,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179580567639,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT202-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 10pcs","public_title":"10pcs","options":["10pcs"],"price":377,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","options":["Batch"],"media":[{"alt":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","id":6257547640919,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
MAX6675 K Type Thermocouple Breakout Board Temperature -200 to 1350 Celsius Module

$11.71
{"id":4518068027479,"title":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","handle":"diymore-bmp180-digital-temperature-barometric-pressure-sensor-altitude-module-replace-bmp085-digital-measures-air-pressure-sensor-for-arduino-raspberry-pi","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2020-05-20T03:07:35+08:00","created_at":"2020-05-20T03:07:38+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Raspberry Pi"],"price":127,"price_min":127,"price_max":377,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179580534871,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT202-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 3pcs","public_title":"3pcs","options":["3pcs"],"price":127,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179580567639,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT202-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 10pcs","public_title":"10pcs","options":["10pcs"],"price":377,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","options":["Batch"],"media":[{"alt":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","id":6257547640919,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
I2C IIC INA226 Voltage Current Power Monitor Module

$22.19
{"id":4518068027479,"title":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","handle":"diymore-bmp180-digital-temperature-barometric-pressure-sensor-altitude-module-replace-bmp085-digital-measures-air-pressure-sensor-for-arduino-raspberry-pi","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2020-05-20T03:07:35+08:00","created_at":"2020-05-20T03:07:38+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Raspberry Pi"],"price":127,"price_min":127,"price_max":377,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179580534871,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT202-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 3pcs","public_title":"3pcs","options":["3pcs"],"price":127,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179580567639,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT202-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 10pcs","public_title":"10pcs","options":["10pcs"],"price":377,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","options":["Batch"],"media":[{"alt":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","id":6257547640919,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
Waterproof DS18B20 Digital Temperature Probe NTC Sensor Thermistor Thermal Cable

$1.45
{"id":4518068027479,"title":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","handle":"diymore-bmp180-digital-temperature-barometric-pressure-sensor-altitude-module-replace-bmp085-digital-measures-air-pressure-sensor-for-arduino-raspberry-pi","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2020-05-20T03:07:35+08:00","created_at":"2020-05-20T03:07:38+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Raspberry Pi"],"price":127,"price_min":127,"price_max":377,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179580534871,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT202-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 3pcs","public_title":"3pcs","options":["3pcs"],"price":127,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179580567639,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT202-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 10pcs","public_title":"10pcs","options":["10pcs"],"price":377,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","options":["Batch"],"media":[{"alt":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","id":6257547640919,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
GP2Y0A02YK0F 4-30cm IR Distance Sensor + Cable

$24.99
{"id":4518068027479,"title":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","handle":"diymore-bmp180-digital-temperature-barometric-pressure-sensor-altitude-module-replace-bmp085-digital-measures-air-pressure-sensor-for-arduino-raspberry-pi","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2020-05-20T03:07:35+08:00","created_at":"2020-05-20T03:07:38+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Raspberry Pi"],"price":127,"price_min":127,"price_max":377,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179580534871,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT202-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 3pcs","public_title":"3pcs","options":["3pcs"],"price":127,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179580567639,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT202-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 10pcs","public_title":"10pcs","options":["10pcs"],"price":377,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","options":["Batch"],"media":[{"alt":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","id":6257547640919,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}