BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module

BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi

brand: DIYTECH SKU:DT202-03

$1.27

The BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.
Using a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.
The BMP180 comes fully calibrated and ready to use.
As the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.
Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.

Features:

The BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?
It follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.
The ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?
BMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.

Applications:

Indoor navigation?
GPS-enhancement for dead-reckoning, slope detection, etc.
Sport devices, e.g. altitude profile
Weather forecast
Vertical velocity indication (rise/sink speed)

Package Included:

1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino

Batch

3pcs 10pcs

Quantity

guaranteeQuality checked
Special gift cardsSpecial gift cards
Free return Within 60 days
Consultancyservice@diytech.cc

Description

The BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.
Using a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.
The BMP180 comes fully calibrated and ready to use.
As the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.
Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.

Manual

Other Customers also buy:

XH-A153 Lithium Battery Bluetooth 5.0 Dual-channel 2 Ch Channel Stereo Low Power Amplifier Board 3W+3W DC 5V PAM8403 Chip

$4.20
{"id":4518068027479,"title":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","handle":"diymore-bmp180-digital-temperature-barometric-pressure-sensor-altitude-module-replace-bmp085-digital-measures-air-pressure-sensor-for-arduino-raspberry-pi","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2020-05-20T03:07:35+08:00","created_at":"2020-05-20T03:07:38+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Raspberry Pi"],"price":127,"price_min":127,"price_max":377,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179580534871,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT202-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 3pcs","public_title":"3pcs","options":["3pcs"],"price":127,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179580567639,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT202-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 10pcs","public_title":"10pcs","options":["10pcs"],"price":377,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","options":["Batch"],"media":[{"alt":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","id":6257547640919,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
Step-down power supply module DC4-40v to DC1.25-36v 8A 200w adjustable XL4016E1 DC-DC DC voltage regulator 004

$3.55
{"id":4518068027479,"title":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","handle":"diymore-bmp180-digital-temperature-barometric-pressure-sensor-altitude-module-replace-bmp085-digital-measures-air-pressure-sensor-for-arduino-raspberry-pi","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2020-05-20T03:07:35+08:00","created_at":"2020-05-20T03:07:38+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Raspberry Pi"],"price":127,"price_min":127,"price_max":377,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179580534871,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT202-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 3pcs","public_title":"3pcs","options":["3pcs"],"price":127,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179580567639,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT202-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 10pcs","public_title":"10pcs","options":["10pcs"],"price":377,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","options":["Batch"],"media":[{"alt":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","id":6257547640919,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
DC 6-40V Lithium Battery Charging and Discharging Module Undervoltage Overvoltage Protection Board Precision Auto Off Charger XY

$2.50
{"id":4518068027479,"title":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","handle":"diymore-bmp180-digital-temperature-barometric-pressure-sensor-altitude-module-replace-bmp085-digital-measures-air-pressure-sensor-for-arduino-raspberry-pi","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2020-05-20T03:07:35+08:00","created_at":"2020-05-20T03:07:38+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Raspberry Pi"],"price":127,"price_min":127,"price_max":377,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179580534871,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT202-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 3pcs","public_title":"3pcs","options":["3pcs"],"price":127,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179580567639,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT202-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 10pcs","public_title":"10pcs","options":["10pcs"],"price":377,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","options":["Batch"],"media":[{"alt":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","id":6257547640919,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
10W/15W/20W/30W/40W Stereo Bluetooth Power Amplifier Board 12V/24V High Power Digital Amplifier Module XY-P15W XY-P40W

$1.82
{"id":4518068027479,"title":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","handle":"diymore-bmp180-digital-temperature-barometric-pressure-sensor-altitude-module-replace-bmp085-digital-measures-air-pressure-sensor-for-arduino-raspberry-pi","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2020-05-20T03:07:35+08:00","created_at":"2020-05-20T03:07:38+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Raspberry Pi"],"price":127,"price_min":127,"price_max":377,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179580534871,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT202-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 3pcs","public_title":"3pcs","options":["3pcs"],"price":127,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179580567639,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT202-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 10pcs","public_title":"10pcs","options":["10pcs"],"price":377,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","options":["Batch"],"media":[{"alt":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","id":6257547640919,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
MH-MX8 MP3 Decoder Board Bluetooth 4.2 5.0 Audio Modul Verlustfreie Stereo DIY Refit Lautsprecher Hohe Fidelity HIFI M18 M28 M38

$0.86
{"id":4518068027479,"title":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","handle":"diymore-bmp180-digital-temperature-barometric-pressure-sensor-altitude-module-replace-bmp085-digital-measures-air-pressure-sensor-for-arduino-raspberry-pi","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2020-05-20T03:07:35+08:00","created_at":"2020-05-20T03:07:38+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Raspberry Pi"],"price":127,"price_min":127,"price_max":377,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179580534871,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT202-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 3pcs","public_title":"3pcs","options":["3pcs"],"price":127,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179580567639,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT202-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 10pcs","public_title":"10pcs","options":["10pcs"],"price":377,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","options":["Batch"],"media":[{"alt":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","id":6257547640919,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
1PCS Bluetooth Audio Receiver board Bluetooth 5.0 mp3 lossless decoder board Wireless Stereo Music Module XY-WRBT

$1.34
{"id":4518068027479,"title":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","handle":"diymore-bmp180-digital-temperature-barometric-pressure-sensor-altitude-module-replace-bmp085-digital-measures-air-pressure-sensor-for-arduino-raspberry-pi","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2020-05-20T03:07:35+08:00","created_at":"2020-05-20T03:07:38+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":["Arduino","For Arduino","Raspberry Pi"],"price":127,"price_min":127,"price_max":377,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179580534871,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT202-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 3pcs","public_title":"3pcs","options":["3pcs"],"price":127,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179580567639,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT202-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi - 10pcs","public_title":"10pcs","options":["10pcs"],"price":377,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","options":["Batch"],"media":[{"alt":"BMP180 Digital Temperature Barometric Pressure Sensor Altitude Module Replace BMP085 Digital Measures air Pressure Sensor for Arduino Raspberry Pi","id":6257547640919,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1494845912_3002.jpg?v=1592420107","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 sensor measures the absolute pressure of the environment using a digital barometer. By converting the pressure measured into altitude, you will have a reliable sensor for determining the height of your robot, plane or projectile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing a sensor as capable as the BMP180 you can achieve accurary of 1m,with noise of only 17cm in ultra high resolution noise.The device will operate at only 0.3uA meaning low current draw for battery powered applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe BMP180 comes fully calibrated and ready to use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAs the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUsing I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very high performance, which enables applications in advanced mobile devices, such as smartphones, tablet PCs and sports devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt follows the BMP085 and brings many improvements, like the smaller size and the expansion of digital interfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe ultra-low power consumption down to 3 ¦ÌA makes the BMP180 the leader in power saving for your mobile devices.?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBMP180 is also distinguished by its very stable behavior (performance) with regard to the independency of the supply voltage.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIndoor navigation?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPS-enhancement for dead-reckoning, slope detection, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSport devices, e.g. altitude profile\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeather forecast\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVertical velocity indication (rise\/sink speed)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x BMP180 Replace BMP085 Digital Barometric Pressure Sensor Module For Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}