L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560

L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila

brand: DIYTECH SKU:DT428-03

$3.81

Overview:

L293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel
The L293D chip is also what¡¯s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output
2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!
Can drive 4 DC motors or 2 stepper motors or 2 Servo
Up to 4 bi-directional DC motors with individual 8-bit speed selection
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC
Pull down resistors keep motors disabled during power-up
2 external terminal power interface, for seperate logic/motor supplies
Compatible for Arduino Mega,? Arduino UNO,Duemilanove&Diecimila

Package Included:
1*L293D Motor Driver Shield

Batch

3pcs 10pcs

Quantity

guaranteeQuality checked
Special gift cardsSpecial gift cards
Free return Within 60 days
Consultancyservice@diytech.cc

Description

Overview:

L293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel
The L293D chip is also what¡¯s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output
2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!
Can drive 4 DC motors or 2 stepper motors or 2 Servo
Up to 4 bi-directional DC motors with individual 8-bit speed selection
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC
Pull down resistors keep motors disabled during power-up
2 external terminal power interface, for seperate logic/motor supplies
Compatible for Arduino Mega,? Arduino UNO,Duemilanove&Diecimila

Package Included:
1*L293D Motor Driver Shield

Manual

Other Customers also buy:

DC 12V-36V 24V 500W PWM Brushless Motor

$9.99
{"id":4518060785751,"title":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila","handle":"l293d-stepper-motor-driver-shield-expansion-board-for-arduino-mega2560-uno-duemilanove-diecimila","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eL293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel\u003c\/li\u003e\n\u003cli\u003eThe L293D chip is also what¡¯s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output\u003c\/li\u003e\n\u003cli\u003e2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!\u003c\/li\u003e\n\u003cli\u003eCan drive 4 DC motors or 2 stepper motors or 2 Servo\u003c\/li\u003e\n\u003cli\u003eUp to 4 bi-directional DC motors with individual 8-bit speed selection\u003c\/li\u003e\n\u003cli\u003eUp to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.\u003c\/li\u003e\n\u003cli\u003e4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC\u003c\/li\u003e\n\u003cli\u003ePull down resistors keep motors disabled during power-up\u003c\/li\u003e\n\u003cli\u003e2 external terminal power interface, for seperate logic\/motor supplies\u003c\/li\u003e\n\u003cli\u003eCompatible for Arduino Mega,? Arduino UNO,Duemilanove\u0026amp;Diecimila\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*L293D Motor Driver Shield","published_at":"2020-05-20T03:03:08+08:00","created_at":"2020-05-20T03:03:11+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino","MEGA2560","MEGA2560 R3","Shield","UNO R3"],"price":381,"price_min":381,"price_max":1132,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179577454679,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT428-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila - 3pcs","public_title":"3pcs","options":["3pcs"],"price":381,"weight":99,"compare_at_price":null,"inventory_management":null,"barcode":"https:\/\/www.amazon.com\/dp\/B01K3YPSAE","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179577487447,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT428-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1132,"weight":330,"compare_at_price":null,"inventory_management":null,"barcode":"https:\/\/www.amazon.com\/dp\/B01K3YPSAE","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087","options":["Batch"],"media":[{"alt":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila","id":6257524408407,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eL293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel\u003c\/li\u003e\n\u003cli\u003eThe L293D chip is also what¡¯s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output\u003c\/li\u003e\n\u003cli\u003e2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!\u003c\/li\u003e\n\u003cli\u003eCan drive 4 DC motors or 2 stepper motors or 2 Servo\u003c\/li\u003e\n\u003cli\u003eUp to 4 bi-directional DC motors with individual 8-bit speed selection\u003c\/li\u003e\n\u003cli\u003eUp to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.\u003c\/li\u003e\n\u003cli\u003e4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC\u003c\/li\u003e\n\u003cli\u003ePull down resistors keep motors disabled during power-up\u003c\/li\u003e\n\u003cli\u003e2 external terminal power interface, for seperate logic\/motor supplies\u003c\/li\u003e\n\u003cli\u003eCompatible for Arduino Mega,? Arduino UNO,Duemilanove\u0026amp;Diecimila\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*L293D Motor Driver Shield"}
TB6612FNG Motor Drive Module-10pcs

$1.99
{"id":4518060785751,"title":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila","handle":"l293d-stepper-motor-driver-shield-expansion-board-for-arduino-mega2560-uno-duemilanove-diecimila","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eL293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel\u003c\/li\u003e\n\u003cli\u003eThe L293D chip is also what¡¯s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output\u003c\/li\u003e\n\u003cli\u003e2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!\u003c\/li\u003e\n\u003cli\u003eCan drive 4 DC motors or 2 stepper motors or 2 Servo\u003c\/li\u003e\n\u003cli\u003eUp to 4 bi-directional DC motors with individual 8-bit speed selection\u003c\/li\u003e\n\u003cli\u003eUp to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.\u003c\/li\u003e\n\u003cli\u003e4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC\u003c\/li\u003e\n\u003cli\u003ePull down resistors keep motors disabled during power-up\u003c\/li\u003e\n\u003cli\u003e2 external terminal power interface, for seperate logic\/motor supplies\u003c\/li\u003e\n\u003cli\u003eCompatible for Arduino Mega,? Arduino UNO,Duemilanove\u0026amp;Diecimila\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*L293D Motor Driver Shield","published_at":"2020-05-20T03:03:08+08:00","created_at":"2020-05-20T03:03:11+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino","MEGA2560","MEGA2560 R3","Shield","UNO R3"],"price":381,"price_min":381,"price_max":1132,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179577454679,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT428-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila - 3pcs","public_title":"3pcs","options":["3pcs"],"price":381,"weight":99,"compare_at_price":null,"inventory_management":null,"barcode":"https:\/\/www.amazon.com\/dp\/B01K3YPSAE","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179577487447,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT428-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1132,"weight":330,"compare_at_price":null,"inventory_management":null,"barcode":"https:\/\/www.amazon.com\/dp\/B01K3YPSAE","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087","options":["Batch"],"media":[{"alt":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila","id":6257524408407,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eL293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel\u003c\/li\u003e\n\u003cli\u003eThe L293D chip is also what¡¯s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output\u003c\/li\u003e\n\u003cli\u003e2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!\u003c\/li\u003e\n\u003cli\u003eCan drive 4 DC motors or 2 stepper motors or 2 Servo\u003c\/li\u003e\n\u003cli\u003eUp to 4 bi-directional DC motors with individual 8-bit speed selection\u003c\/li\u003e\n\u003cli\u003eUp to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.\u003c\/li\u003e\n\u003cli\u003e4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC\u003c\/li\u003e\n\u003cli\u003ePull down resistors keep motors disabled during power-up\u003c\/li\u003e\n\u003cli\u003e2 external terminal power interface, for seperate logic\/motor supplies\u003c\/li\u003e\n\u003cli\u003eCompatible for Arduino Mega,? Arduino UNO,Duemilanove\u0026amp;Diecimila\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*L293D Motor Driver Shield"}
50W DC 12v 24v Constant Current Power Supply LED Driver Module Board DC LED Chips Light For High Power Non-waterproof

$9.36
{"id":4518060785751,"title":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila","handle":"l293d-stepper-motor-driver-shield-expansion-board-for-arduino-mega2560-uno-duemilanove-diecimila","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eL293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel\u003c\/li\u003e\n\u003cli\u003eThe L293D chip is also what¡¯s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output\u003c\/li\u003e\n\u003cli\u003e2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!\u003c\/li\u003e\n\u003cli\u003eCan drive 4 DC motors or 2 stepper motors or 2 Servo\u003c\/li\u003e\n\u003cli\u003eUp to 4 bi-directional DC motors with individual 8-bit speed selection\u003c\/li\u003e\n\u003cli\u003eUp to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.\u003c\/li\u003e\n\u003cli\u003e4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC\u003c\/li\u003e\n\u003cli\u003ePull down resistors keep motors disabled during power-up\u003c\/li\u003e\n\u003cli\u003e2 external terminal power interface, for seperate logic\/motor supplies\u003c\/li\u003e\n\u003cli\u003eCompatible for Arduino Mega,? Arduino UNO,Duemilanove\u0026amp;Diecimila\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*L293D Motor Driver Shield","published_at":"2020-05-20T03:03:08+08:00","created_at":"2020-05-20T03:03:11+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino","MEGA2560","MEGA2560 R3","Shield","UNO R3"],"price":381,"price_min":381,"price_max":1132,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179577454679,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT428-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila - 3pcs","public_title":"3pcs","options":["3pcs"],"price":381,"weight":99,"compare_at_price":null,"inventory_management":null,"barcode":"https:\/\/www.amazon.com\/dp\/B01K3YPSAE","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179577487447,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT428-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1132,"weight":330,"compare_at_price":null,"inventory_management":null,"barcode":"https:\/\/www.amazon.com\/dp\/B01K3YPSAE","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087","options":["Batch"],"media":[{"alt":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila","id":6257524408407,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eL293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel\u003c\/li\u003e\n\u003cli\u003eThe L293D chip is also what¡¯s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output\u003c\/li\u003e\n\u003cli\u003e2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!\u003c\/li\u003e\n\u003cli\u003eCan drive 4 DC motors or 2 stepper motors or 2 Servo\u003c\/li\u003e\n\u003cli\u003eUp to 4 bi-directional DC motors with individual 8-bit speed selection\u003c\/li\u003e\n\u003cli\u003eUp to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.\u003c\/li\u003e\n\u003cli\u003e4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC\u003c\/li\u003e\n\u003cli\u003ePull down resistors keep motors disabled during power-up\u003c\/li\u003e\n\u003cli\u003e2 external terminal power interface, for seperate logic\/motor supplies\u003c\/li\u003e\n\u003cli\u003eCompatible for Arduino Mega,? Arduino UNO,Duemilanove\u0026amp;Diecimila\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*L293D Motor Driver Shield"}
High-Current MOSFET Switch Module DC Fan Motor LED Strip Driver Drive Steples Diy Electronic Diy Kit Pcb Board

$5.16
{"id":4518060785751,"title":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila","handle":"l293d-stepper-motor-driver-shield-expansion-board-for-arduino-mega2560-uno-duemilanove-diecimila","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eL293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel\u003c\/li\u003e\n\u003cli\u003eThe L293D chip is also what¡¯s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output\u003c\/li\u003e\n\u003cli\u003e2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!\u003c\/li\u003e\n\u003cli\u003eCan drive 4 DC motors or 2 stepper motors or 2 Servo\u003c\/li\u003e\n\u003cli\u003eUp to 4 bi-directional DC motors with individual 8-bit speed selection\u003c\/li\u003e\n\u003cli\u003eUp to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.\u003c\/li\u003e\n\u003cli\u003e4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC\u003c\/li\u003e\n\u003cli\u003ePull down resistors keep motors disabled during power-up\u003c\/li\u003e\n\u003cli\u003e2 external terminal power interface, for seperate logic\/motor supplies\u003c\/li\u003e\n\u003cli\u003eCompatible for Arduino Mega,? Arduino UNO,Duemilanove\u0026amp;Diecimila\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*L293D Motor Driver Shield","published_at":"2020-05-20T03:03:08+08:00","created_at":"2020-05-20T03:03:11+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino","MEGA2560","MEGA2560 R3","Shield","UNO R3"],"price":381,"price_min":381,"price_max":1132,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179577454679,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT428-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila - 3pcs","public_title":"3pcs","options":["3pcs"],"price":381,"weight":99,"compare_at_price":null,"inventory_management":null,"barcode":"https:\/\/www.amazon.com\/dp\/B01K3YPSAE","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179577487447,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT428-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1132,"weight":330,"compare_at_price":null,"inventory_management":null,"barcode":"https:\/\/www.amazon.com\/dp\/B01K3YPSAE","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087","options":["Batch"],"media":[{"alt":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila","id":6257524408407,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eL293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel\u003c\/li\u003e\n\u003cli\u003eThe L293D chip is also what¡¯s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output\u003c\/li\u003e\n\u003cli\u003e2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!\u003c\/li\u003e\n\u003cli\u003eCan drive 4 DC motors or 2 stepper motors or 2 Servo\u003c\/li\u003e\n\u003cli\u003eUp to 4 bi-directional DC motors with individual 8-bit speed selection\u003c\/li\u003e\n\u003cli\u003eUp to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.\u003c\/li\u003e\n\u003cli\u003e4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC\u003c\/li\u003e\n\u003cli\u003ePull down resistors keep motors disabled during power-up\u003c\/li\u003e\n\u003cli\u003e2 external terminal power interface, for seperate logic\/motor supplies\u003c\/li\u003e\n\u003cli\u003eCompatible for Arduino Mega,? Arduino UNO,Duemilanove\u0026amp;Diecimila\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*L293D Motor Driver Shield"}
H-Bridge Dual Motor Drive Module Board DC MOSFET IRF3205 3V-36V 10A 30A Peak 30A

$32.59
{"id":4518060785751,"title":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila","handle":"l293d-stepper-motor-driver-shield-expansion-board-for-arduino-mega2560-uno-duemilanove-diecimila","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eL293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel\u003c\/li\u003e\n\u003cli\u003eThe L293D chip is also what¡¯s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output\u003c\/li\u003e\n\u003cli\u003e2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!\u003c\/li\u003e\n\u003cli\u003eCan drive 4 DC motors or 2 stepper motors or 2 Servo\u003c\/li\u003e\n\u003cli\u003eUp to 4 bi-directional DC motors with individual 8-bit speed selection\u003c\/li\u003e\n\u003cli\u003eUp to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.\u003c\/li\u003e\n\u003cli\u003e4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC\u003c\/li\u003e\n\u003cli\u003ePull down resistors keep motors disabled during power-up\u003c\/li\u003e\n\u003cli\u003e2 external terminal power interface, for seperate logic\/motor supplies\u003c\/li\u003e\n\u003cli\u003eCompatible for Arduino Mega,? Arduino UNO,Duemilanove\u0026amp;Diecimila\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*L293D Motor Driver Shield","published_at":"2020-05-20T03:03:08+08:00","created_at":"2020-05-20T03:03:11+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino","MEGA2560","MEGA2560 R3","Shield","UNO R3"],"price":381,"price_min":381,"price_max":1132,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179577454679,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT428-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila - 3pcs","public_title":"3pcs","options":["3pcs"],"price":381,"weight":99,"compare_at_price":null,"inventory_management":null,"barcode":"https:\/\/www.amazon.com\/dp\/B01K3YPSAE","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179577487447,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT428-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1132,"weight":330,"compare_at_price":null,"inventory_management":null,"barcode":"https:\/\/www.amazon.com\/dp\/B01K3YPSAE","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087","options":["Batch"],"media":[{"alt":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila","id":6257524408407,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eL293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel\u003c\/li\u003e\n\u003cli\u003eThe L293D chip is also what¡¯s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output\u003c\/li\u003e\n\u003cli\u003e2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!\u003c\/li\u003e\n\u003cli\u003eCan drive 4 DC motors or 2 stepper motors or 2 Servo\u003c\/li\u003e\n\u003cli\u003eUp to 4 bi-directional DC motors with individual 8-bit speed selection\u003c\/li\u003e\n\u003cli\u003eUp to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.\u003c\/li\u003e\n\u003cli\u003e4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC\u003c\/li\u003e\n\u003cli\u003ePull down resistors keep motors disabled during power-up\u003c\/li\u003e\n\u003cli\u003e2 external terminal power interface, for seperate logic\/motor supplies\u003c\/li\u003e\n\u003cli\u003eCompatible for Arduino Mega,? Arduino UNO,Duemilanove\u0026amp;Diecimila\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*L293D Motor Driver Shield"}
4 Channel 4CH HG7881 Chip H-bridge DC 2.5-12V Stepper Motor Driver Module Controller PCB Board 4 Way 2 Phase for Arduino

$5.16
{"id":4518060785751,"title":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila","handle":"l293d-stepper-motor-driver-shield-expansion-board-for-arduino-mega2560-uno-duemilanove-diecimila","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eL293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel\u003c\/li\u003e\n\u003cli\u003eThe L293D chip is also what¡¯s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output\u003c\/li\u003e\n\u003cli\u003e2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!\u003c\/li\u003e\n\u003cli\u003eCan drive 4 DC motors or 2 stepper motors or 2 Servo\u003c\/li\u003e\n\u003cli\u003eUp to 4 bi-directional DC motors with individual 8-bit speed selection\u003c\/li\u003e\n\u003cli\u003eUp to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.\u003c\/li\u003e\n\u003cli\u003e4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC\u003c\/li\u003e\n\u003cli\u003ePull down resistors keep motors disabled during power-up\u003c\/li\u003e\n\u003cli\u003e2 external terminal power interface, for seperate logic\/motor supplies\u003c\/li\u003e\n\u003cli\u003eCompatible for Arduino Mega,? Arduino UNO,Duemilanove\u0026amp;Diecimila\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*L293D Motor Driver Shield","published_at":"2020-05-20T03:03:08+08:00","created_at":"2020-05-20T03:03:11+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino","MEGA2560","MEGA2560 R3","Shield","UNO R3"],"price":381,"price_min":381,"price_max":1132,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179577454679,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT428-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila - 3pcs","public_title":"3pcs","options":["3pcs"],"price":381,"weight":99,"compare_at_price":null,"inventory_management":null,"barcode":"https:\/\/www.amazon.com\/dp\/B01K3YPSAE","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179577487447,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT428-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1132,"weight":330,"compare_at_price":null,"inventory_management":null,"barcode":"https:\/\/www.amazon.com\/dp\/B01K3YPSAE","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087","options":["Batch"],"media":[{"alt":"L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila","id":6257524408407,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1495427362_1107.jpg?v=1592420087","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eL293D is a monolithic integrated, high voltage, high current, 4-channel driver.Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel\u003c\/li\u003e\n\u003cli\u003eThe L293D chip is also what¡¯s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output\u003c\/li\u003e\n\u003cli\u003e2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!\u003c\/li\u003e\n\u003cli\u003eCan drive 4 DC motors or 2 stepper motors or 2 Servo\u003c\/li\u003e\n\u003cli\u003eUp to 4 bi-directional DC motors with individual 8-bit speed selection\u003c\/li\u003e\n\u003cli\u003eUp to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.\u003c\/li\u003e\n\u003cli\u003e4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC\u003c\/li\u003e\n\u003cli\u003ePull down resistors keep motors disabled during power-up\u003c\/li\u003e\n\u003cli\u003e2 external terminal power interface, for seperate logic\/motor supplies\u003c\/li\u003e\n\u003cli\u003eCompatible for Arduino Mega,? Arduino UNO,Duemilanove\u0026amp;Diecimila\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*L293D Motor Driver Shield"}

Compare Box
Images
Name
Price
Vendor
Type
Variant
Available
Remove
Detail

L293D Stepper Motor Driver Shield Expansion Board for Arduino MEGA2560 UNO Duemilanove Diecimila

Login

Reset your password

Register