DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepSti

DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino

brand: DIYTECH SKU:DT4948-03

$3.29

Features:

Simple step and direction control interface
Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates
45 V maximum supply voltage
Built-in regulator (no external logic voltage supply needed)
Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
Short-to-ground and shorted-load protection
4-layer, 2 oz copper PCB for improved heat dissipation
Exposed solderable ground pad below the driver IC on the bottom of the PCB
Module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)

Package Included:
1 x DRV8825 Module
1 x Heatsink

Batch

3pcs 10pcs

Quantity

guaranteeQuality checked
Special gift cardsSpecial gift cards
Free return Within 60 days
Consultancyservice@diytech.cc

Description

Features:

Simple step and direction control interface
Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates
45 V maximum supply voltage
Built-in regulator (no external logic voltage supply needed)
Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
Short-to-ground and shorted-load protection
4-layer, 2 oz copper PCB for improved heat dissipation
Exposed solderable ground pad below the driver IC on the bottom of the PCB
Module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)

Package Included:
1 x DRV8825 Module
1 x Heatsink

Manual

Other Customers also buy:

DC 12V-36V 24V 500W PWM Brushless Motor

$9.99
{"id":4518053544023,"title":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","handle":"arduino-drv8825-stepper-motor-driver-module-3d-printer-ramps1-4-reprap-stepstick","description":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink","published_at":"2020-05-20T02:59:16+08:00","created_at":"2020-05-20T02:59:18+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino"],"price":329,"price_min":329,"price_max":975,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179574046807,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT4948-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":329,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179574079575,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT4948-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":975,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","options":["Batch"],"media":[{"alt":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","id":6257501339735,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink"}
TB6612FNG Motor Drive Module-10pcs

$1.99
{"id":4518053544023,"title":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","handle":"arduino-drv8825-stepper-motor-driver-module-3d-printer-ramps1-4-reprap-stepstick","description":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink","published_at":"2020-05-20T02:59:16+08:00","created_at":"2020-05-20T02:59:18+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino"],"price":329,"price_min":329,"price_max":975,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179574046807,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT4948-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":329,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179574079575,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT4948-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":975,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","options":["Batch"],"media":[{"alt":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","id":6257501339735,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink"}
50W DC 12v 24v Constant Current Power Supply LED Driver Module Board DC LED Chips Light For High Power Non-waterproof

$9.36
{"id":4518053544023,"title":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","handle":"arduino-drv8825-stepper-motor-driver-module-3d-printer-ramps1-4-reprap-stepstick","description":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink","published_at":"2020-05-20T02:59:16+08:00","created_at":"2020-05-20T02:59:18+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino"],"price":329,"price_min":329,"price_max":975,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179574046807,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT4948-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":329,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179574079575,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT4948-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":975,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","options":["Batch"],"media":[{"alt":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","id":6257501339735,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink"}
High-Current MOSFET Switch Module DC Fan Motor LED Strip Driver Drive Steples Diy Electronic Diy Kit Pcb Board

$5.16
{"id":4518053544023,"title":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","handle":"arduino-drv8825-stepper-motor-driver-module-3d-printer-ramps1-4-reprap-stepstick","description":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink","published_at":"2020-05-20T02:59:16+08:00","created_at":"2020-05-20T02:59:18+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino"],"price":329,"price_min":329,"price_max":975,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179574046807,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT4948-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":329,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179574079575,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT4948-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":975,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","options":["Batch"],"media":[{"alt":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","id":6257501339735,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink"}
H-Bridge Dual Motor Drive Module Board DC MOSFET IRF3205 3V-36V 10A 30A Peak 30A

$32.59
{"id":4518053544023,"title":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","handle":"arduino-drv8825-stepper-motor-driver-module-3d-printer-ramps1-4-reprap-stepstick","description":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink","published_at":"2020-05-20T02:59:16+08:00","created_at":"2020-05-20T02:59:18+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino"],"price":329,"price_min":329,"price_max":975,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179574046807,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT4948-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":329,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179574079575,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT4948-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":975,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","options":["Batch"],"media":[{"alt":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","id":6257501339735,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink"}
4 Channel 4CH HG7881 Chip H-bridge DC 2.5-12V Stepper Motor Driver Module Controller PCB Board 4 Way 2 Phase for Arduino

$5.16
{"id":4518053544023,"title":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","handle":"arduino-drv8825-stepper-motor-driver-module-3d-printer-ramps1-4-reprap-stepstick","description":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink","published_at":"2020-05-20T02:59:16+08:00","created_at":"2020-05-20T02:59:18+08:00","vendor":"DIYTECH","type":"Motor Driver Module","tags":["Arduino","For Arduino"],"price":329,"price_min":329,"price_max":975,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179574046807,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT4948-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 3pcs","public_title":"3pcs","options":["3pcs"],"price":329,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179574079575,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT4948-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino - 10pcs","public_title":"10pcs","options":["10pcs"],"price":975,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","options":["Batch"],"media":[{"alt":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","id":6257501339735,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1526446122_xb7dn.jpg?v=1592420062","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor¡¯s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink"}

Compare Box
Images
Name
Price
Vendor
Type
Variant
Available
Remove
Detail

DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino

Login

Reset your password

Register