CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module
CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module
brand: DIYTECH SKU:DT3846-03
Regular price
$5.33
![]()
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancyservice@diytech.cc
Overview:
Features:
Package Included:
1*CS5460A Power Energy Module
- The CS5460A is a converter that contains two ¦¤¦² analog-to-digital converters (ADC), high-speed power calculation and a serial interface To-digital converter with a high degree of integration
- It can be precise measurement and calculation of active energy, instantaneous power, IRMS and VRMS,For the development of single-phase 2-wire or 3-wire meter
- CS5460A the current can be measured using a low-cost shunt or transformer Voltage is measured with a voltage divider resistor or a voltage transformer
- CS5460A with the microcontroller to communicate with the bi-directional serial port, the chip pulse input The frequency is proportional to the active energy
- CS5460A is convenient On-chip AC / DC system calibration.The "bootstrap" feature allows the CS5460A to work independently, After the system power automatically initialized. In the self-boot mode,the CS5460A reads the calibration number from an external EEPROM according to the start instruction
- The CS5460A operates when using this mode when no additional micro-controller, so when the meter for large quantities Residential energy measurement, can reduce the cost of the meter
Features:
- Power Data Linearity: Linearity in 1000: 1 dynamic range Is ¡À 0.1%
- On-chip functions: can measure power (active), I * V, IRMS and VRMS, with power - pulse conversion function
- Can be "self-guided" from the serial EEPROM smart, not micro Controller
- AC or DC system calibration
- A mechanical counter / stepper motor driver
- In line with IEC687 / 1036, JIS industry standards
- Power consumption <12mW
- Optimized shunt interface
- V to I phase compensation
- Single-supply ground reference signal
- 2.5V on-chip reference voltage (maximum temperature drift 60ppm / ¡æ)
- Simple three-wire digital serial interface
- Watchdog Timer
- With a power monitor
- Power supply configuration
- VA + = +5 V; VA- = 0V; VD + = + 3.3V ~ + 5V
Package Included:
1*CS5460A Power Energy Module
Other Customers also buy:
-
$2.99{"id":4518013632599,"title":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module","handle":"cs5460a-serial-single-phase-bi-directional-power-energy-metering-adc-module","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe CS5460A is a converter that contains two ¦¤¦² analog-to-digital converters (ADC), high-speed power calculation and a serial interface To-digital converter with a high degree of integration\u003c\/li\u003e\n\u003cli\u003eIt can be precise measurement and calculation of active energy, instantaneous power, IRMS and VRMS,For the development of single-phase 2-wire or 3-wire meter\u003c\/li\u003e\n\u003cli\u003eCS5460A the current can be measured using a low-cost shunt or transformer Voltage is measured with a voltage divider resistor or a voltage transformer\u003c\/li\u003e\n\u003cli\u003eCS5460A with the microcontroller to communicate with the bi-directional serial port, the chip pulse input The frequency is proportional to the active energy\u003c\/li\u003e\n\u003cli\u003eCS5460A is convenient On-chip AC \/ DC system calibration.The \"bootstrap\" feature allows the CS5460A to work independently, After the system power automatically initialized. In the self-boot mode,the CS5460A reads the calibration number from an external EEPROM according to the start instruction\u003c\/li\u003e\n\u003cli\u003eThe CS5460A operates when using this mode when no additional micro-controller, so when the meter for large quantities Residential energy measurement, can reduce the cost of the meter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003ePower Data Linearity: Linearity in 1000: 1 dynamic range Is ¡À 0.1%\u003c\/li\u003e\n\u003cli\u003eOn-chip functions: can measure power (active), I * V, IRMS and VRMS, with power - pulse conversion function\u003c\/li\u003e\n\u003cli\u003eCan be \"self-guided\" from the serial EEPROM smart, not micro Controller\u003c\/li\u003e\n\u003cli\u003eAC or DC system calibration\u003c\/li\u003e\n\u003cli\u003eA mechanical counter \/ stepper motor driver\u003c\/li\u003e\n\u003cli\u003eIn line with IEC687 \/ 1036, JIS industry standards\u003c\/li\u003e\n\u003cli\u003ePower consumption \u0026lt;12mW\u003c\/li\u003e\n\u003cli\u003eOptimized shunt interface\u003c\/li\u003e\n\u003cli\u003eV to I phase compensation\u003c\/li\u003e\n\u003cli\u003eSingle-supply ground reference signal\u003c\/li\u003e\n\u003cli\u003e2.5V on-chip reference voltage (maximum temperature drift 60ppm \/ ¡æ)\u003c\/li\u003e\n\u003cli\u003eSimple three-wire digital serial interface\u003c\/li\u003e\n\u003cli\u003eWatchdog Timer\u003c\/li\u003e\n\u003cli\u003eWith a power monitor\u003c\/li\u003e\n\u003cli\u003ePower supply configuration\u003c\/li\u003e\n\u003cli\u003eVA + = +5 V; VA- = 0V; VD + = + 3.3V ~ + 5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*CS5460A Power Energy Module\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","published_at":"2020-05-20T02:38:12+08:00","created_at":"2020-05-20T02:38:14+08:00","vendor":"DIYTECH","type":"Testers","tags":[],"price":533,"price_min":533,"price_max":1582,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179539050583,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3846-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module - 3pcs","public_title":"3pcs","options":["3pcs"],"price":533,"weight":21,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179539083351,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3846-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1582,"weight":70,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840","options":["Batch"],"media":[{"alt":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module","id":6257385766999,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe CS5460A is a converter that contains two ¦¤¦² analog-to-digital converters (ADC), high-speed power calculation and a serial interface To-digital converter with a high degree of integration\u003c\/li\u003e\n\u003cli\u003eIt can be precise measurement and calculation of active energy, instantaneous power, IRMS and VRMS,For the development of single-phase 2-wire or 3-wire meter\u003c\/li\u003e\n\u003cli\u003eCS5460A the current can be measured using a low-cost shunt or transformer Voltage is measured with a voltage divider resistor or a voltage transformer\u003c\/li\u003e\n\u003cli\u003eCS5460A with the microcontroller to communicate with the bi-directional serial port, the chip pulse input The frequency is proportional to the active energy\u003c\/li\u003e\n\u003cli\u003eCS5460A is convenient On-chip AC \/ DC system calibration.The \"bootstrap\" feature allows the CS5460A to work independently, After the system power automatically initialized. In the self-boot mode,the CS5460A reads the calibration number from an external EEPROM according to the start instruction\u003c\/li\u003e\n\u003cli\u003eThe CS5460A operates when using this mode when no additional micro-controller, so when the meter for large quantities Residential energy measurement, can reduce the cost of the meter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003ePower Data Linearity: Linearity in 1000: 1 dynamic range Is ¡À 0.1%\u003c\/li\u003e\n\u003cli\u003eOn-chip functions: can measure power (active), I * V, IRMS and VRMS, with power - pulse conversion function\u003c\/li\u003e\n\u003cli\u003eCan be \"self-guided\" from the serial EEPROM smart, not micro Controller\u003c\/li\u003e\n\u003cli\u003eAC or DC system calibration\u003c\/li\u003e\n\u003cli\u003eA mechanical counter \/ stepper motor driver\u003c\/li\u003e\n\u003cli\u003eIn line with IEC687 \/ 1036, JIS industry standards\u003c\/li\u003e\n\u003cli\u003ePower consumption \u0026lt;12mW\u003c\/li\u003e\n\u003cli\u003eOptimized shunt interface\u003c\/li\u003e\n\u003cli\u003eV to I phase compensation\u003c\/li\u003e\n\u003cli\u003eSingle-supply ground reference signal\u003c\/li\u003e\n\u003cli\u003e2.5V on-chip reference voltage (maximum temperature drift 60ppm \/ ¡æ)\u003c\/li\u003e\n\u003cli\u003eSimple three-wire digital serial interface\u003c\/li\u003e\n\u003cli\u003eWatchdog Timer\u003c\/li\u003e\n\u003cli\u003eWith a power monitor\u003c\/li\u003e\n\u003cli\u003ePower supply configuration\u003c\/li\u003e\n\u003cli\u003eVA + = +5 V; VA- = 0V; VD + = + 3.3V ~ + 5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*CS5460A Power Energy Module\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e"} -
$29.89{"id":4518013632599,"title":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module","handle":"cs5460a-serial-single-phase-bi-directional-power-energy-metering-adc-module","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe CS5460A is a converter that contains two ¦¤¦² analog-to-digital converters (ADC), high-speed power calculation and a serial interface To-digital converter with a high degree of integration\u003c\/li\u003e\n\u003cli\u003eIt can be precise measurement and calculation of active energy, instantaneous power, IRMS and VRMS,For the development of single-phase 2-wire or 3-wire meter\u003c\/li\u003e\n\u003cli\u003eCS5460A the current can be measured using a low-cost shunt or transformer Voltage is measured with a voltage divider resistor or a voltage transformer\u003c\/li\u003e\n\u003cli\u003eCS5460A with the microcontroller to communicate with the bi-directional serial port, the chip pulse input The frequency is proportional to the active energy\u003c\/li\u003e\n\u003cli\u003eCS5460A is convenient On-chip AC \/ DC system calibration.The \"bootstrap\" feature allows the CS5460A to work independently, After the system power automatically initialized. In the self-boot mode,the CS5460A reads the calibration number from an external EEPROM according to the start instruction\u003c\/li\u003e\n\u003cli\u003eThe CS5460A operates when using this mode when no additional micro-controller, so when the meter for large quantities Residential energy measurement, can reduce the cost of the meter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003ePower Data Linearity: Linearity in 1000: 1 dynamic range Is ¡À 0.1%\u003c\/li\u003e\n\u003cli\u003eOn-chip functions: can measure power (active), I * V, IRMS and VRMS, with power - pulse conversion function\u003c\/li\u003e\n\u003cli\u003eCan be \"self-guided\" from the serial EEPROM smart, not micro Controller\u003c\/li\u003e\n\u003cli\u003eAC or DC system calibration\u003c\/li\u003e\n\u003cli\u003eA mechanical counter \/ stepper motor driver\u003c\/li\u003e\n\u003cli\u003eIn line with IEC687 \/ 1036, JIS industry standards\u003c\/li\u003e\n\u003cli\u003ePower consumption \u0026lt;12mW\u003c\/li\u003e\n\u003cli\u003eOptimized shunt interface\u003c\/li\u003e\n\u003cli\u003eV to I phase compensation\u003c\/li\u003e\n\u003cli\u003eSingle-supply ground reference signal\u003c\/li\u003e\n\u003cli\u003e2.5V on-chip reference voltage (maximum temperature drift 60ppm \/ ¡æ)\u003c\/li\u003e\n\u003cli\u003eSimple three-wire digital serial interface\u003c\/li\u003e\n\u003cli\u003eWatchdog Timer\u003c\/li\u003e\n\u003cli\u003eWith a power monitor\u003c\/li\u003e\n\u003cli\u003ePower supply configuration\u003c\/li\u003e\n\u003cli\u003eVA + = +5 V; VA- = 0V; VD + = + 3.3V ~ + 5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*CS5460A Power Energy Module\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","published_at":"2020-05-20T02:38:12+08:00","created_at":"2020-05-20T02:38:14+08:00","vendor":"DIYTECH","type":"Testers","tags":[],"price":533,"price_min":533,"price_max":1582,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179539050583,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3846-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module - 3pcs","public_title":"3pcs","options":["3pcs"],"price":533,"weight":21,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179539083351,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3846-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1582,"weight":70,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840","options":["Batch"],"media":[{"alt":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module","id":6257385766999,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe CS5460A is a converter that contains two ¦¤¦² analog-to-digital converters (ADC), high-speed power calculation and a serial interface To-digital converter with a high degree of integration\u003c\/li\u003e\n\u003cli\u003eIt can be precise measurement and calculation of active energy, instantaneous power, IRMS and VRMS,For the development of single-phase 2-wire or 3-wire meter\u003c\/li\u003e\n\u003cli\u003eCS5460A the current can be measured using a low-cost shunt or transformer Voltage is measured with a voltage divider resistor or a voltage transformer\u003c\/li\u003e\n\u003cli\u003eCS5460A with the microcontroller to communicate with the bi-directional serial port, the chip pulse input The frequency is proportional to the active energy\u003c\/li\u003e\n\u003cli\u003eCS5460A is convenient On-chip AC \/ DC system calibration.The \"bootstrap\" feature allows the CS5460A to work independently, After the system power automatically initialized. In the self-boot mode,the CS5460A reads the calibration number from an external EEPROM according to the start instruction\u003c\/li\u003e\n\u003cli\u003eThe CS5460A operates when using this mode when no additional micro-controller, so when the meter for large quantities Residential energy measurement, can reduce the cost of the meter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003ePower Data Linearity: Linearity in 1000: 1 dynamic range Is ¡À 0.1%\u003c\/li\u003e\n\u003cli\u003eOn-chip functions: can measure power (active), I * V, IRMS and VRMS, with power - pulse conversion function\u003c\/li\u003e\n\u003cli\u003eCan be \"self-guided\" from the serial EEPROM smart, not micro Controller\u003c\/li\u003e\n\u003cli\u003eAC or DC system calibration\u003c\/li\u003e\n\u003cli\u003eA mechanical counter \/ stepper motor driver\u003c\/li\u003e\n\u003cli\u003eIn line with IEC687 \/ 1036, JIS industry standards\u003c\/li\u003e\n\u003cli\u003ePower consumption \u0026lt;12mW\u003c\/li\u003e\n\u003cli\u003eOptimized shunt interface\u003c\/li\u003e\n\u003cli\u003eV to I phase compensation\u003c\/li\u003e\n\u003cli\u003eSingle-supply ground reference signal\u003c\/li\u003e\n\u003cli\u003e2.5V on-chip reference voltage (maximum temperature drift 60ppm \/ ¡æ)\u003c\/li\u003e\n\u003cli\u003eSimple three-wire digital serial interface\u003c\/li\u003e\n\u003cli\u003eWatchdog Timer\u003c\/li\u003e\n\u003cli\u003eWith a power monitor\u003c\/li\u003e\n\u003cli\u003ePower supply configuration\u003c\/li\u003e\n\u003cli\u003eVA + = +5 V; VA- = 0V; VD + = + 3.3V ~ + 5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*CS5460A Power Energy Module\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e"} -
$10.89{"id":4518013632599,"title":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module","handle":"cs5460a-serial-single-phase-bi-directional-power-energy-metering-adc-module","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe CS5460A is a converter that contains two ¦¤¦² analog-to-digital converters (ADC), high-speed power calculation and a serial interface To-digital converter with a high degree of integration\u003c\/li\u003e\n\u003cli\u003eIt can be precise measurement and calculation of active energy, instantaneous power, IRMS and VRMS,For the development of single-phase 2-wire or 3-wire meter\u003c\/li\u003e\n\u003cli\u003eCS5460A the current can be measured using a low-cost shunt or transformer Voltage is measured with a voltage divider resistor or a voltage transformer\u003c\/li\u003e\n\u003cli\u003eCS5460A with the microcontroller to communicate with the bi-directional serial port, the chip pulse input The frequency is proportional to the active energy\u003c\/li\u003e\n\u003cli\u003eCS5460A is convenient On-chip AC \/ DC system calibration.The \"bootstrap\" feature allows the CS5460A to work independently, After the system power automatically initialized. In the self-boot mode,the CS5460A reads the calibration number from an external EEPROM according to the start instruction\u003c\/li\u003e\n\u003cli\u003eThe CS5460A operates when using this mode when no additional micro-controller, so when the meter for large quantities Residential energy measurement, can reduce the cost of the meter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003ePower Data Linearity: Linearity in 1000: 1 dynamic range Is ¡À 0.1%\u003c\/li\u003e\n\u003cli\u003eOn-chip functions: can measure power (active), I * V, IRMS and VRMS, with power - pulse conversion function\u003c\/li\u003e\n\u003cli\u003eCan be \"self-guided\" from the serial EEPROM smart, not micro Controller\u003c\/li\u003e\n\u003cli\u003eAC or DC system calibration\u003c\/li\u003e\n\u003cli\u003eA mechanical counter \/ stepper motor driver\u003c\/li\u003e\n\u003cli\u003eIn line with IEC687 \/ 1036, JIS industry standards\u003c\/li\u003e\n\u003cli\u003ePower consumption \u0026lt;12mW\u003c\/li\u003e\n\u003cli\u003eOptimized shunt interface\u003c\/li\u003e\n\u003cli\u003eV to I phase compensation\u003c\/li\u003e\n\u003cli\u003eSingle-supply ground reference signal\u003c\/li\u003e\n\u003cli\u003e2.5V on-chip reference voltage (maximum temperature drift 60ppm \/ ¡æ)\u003c\/li\u003e\n\u003cli\u003eSimple three-wire digital serial interface\u003c\/li\u003e\n\u003cli\u003eWatchdog Timer\u003c\/li\u003e\n\u003cli\u003eWith a power monitor\u003c\/li\u003e\n\u003cli\u003ePower supply configuration\u003c\/li\u003e\n\u003cli\u003eVA + = +5 V; VA- = 0V; VD + = + 3.3V ~ + 5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*CS5460A Power Energy Module\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","published_at":"2020-05-20T02:38:12+08:00","created_at":"2020-05-20T02:38:14+08:00","vendor":"DIYTECH","type":"Testers","tags":[],"price":533,"price_min":533,"price_max":1582,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179539050583,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3846-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module - 3pcs","public_title":"3pcs","options":["3pcs"],"price":533,"weight":21,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179539083351,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3846-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1582,"weight":70,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840","options":["Batch"],"media":[{"alt":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module","id":6257385766999,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe CS5460A is a converter that contains two ¦¤¦² analog-to-digital converters (ADC), high-speed power calculation and a serial interface To-digital converter with a high degree of integration\u003c\/li\u003e\n\u003cli\u003eIt can be precise measurement and calculation of active energy, instantaneous power, IRMS and VRMS,For the development of single-phase 2-wire or 3-wire meter\u003c\/li\u003e\n\u003cli\u003eCS5460A the current can be measured using a low-cost shunt or transformer Voltage is measured with a voltage divider resistor or a voltage transformer\u003c\/li\u003e\n\u003cli\u003eCS5460A with the microcontroller to communicate with the bi-directional serial port, the chip pulse input The frequency is proportional to the active energy\u003c\/li\u003e\n\u003cli\u003eCS5460A is convenient On-chip AC \/ DC system calibration.The \"bootstrap\" feature allows the CS5460A to work independently, After the system power automatically initialized. In the self-boot mode,the CS5460A reads the calibration number from an external EEPROM according to the start instruction\u003c\/li\u003e\n\u003cli\u003eThe CS5460A operates when using this mode when no additional micro-controller, so when the meter for large quantities Residential energy measurement, can reduce the cost of the meter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003ePower Data Linearity: Linearity in 1000: 1 dynamic range Is ¡À 0.1%\u003c\/li\u003e\n\u003cli\u003eOn-chip functions: can measure power (active), I * V, IRMS and VRMS, with power - pulse conversion function\u003c\/li\u003e\n\u003cli\u003eCan be \"self-guided\" from the serial EEPROM smart, not micro Controller\u003c\/li\u003e\n\u003cli\u003eAC or DC system calibration\u003c\/li\u003e\n\u003cli\u003eA mechanical counter \/ stepper motor driver\u003c\/li\u003e\n\u003cli\u003eIn line with IEC687 \/ 1036, JIS industry standards\u003c\/li\u003e\n\u003cli\u003ePower consumption \u0026lt;12mW\u003c\/li\u003e\n\u003cli\u003eOptimized shunt interface\u003c\/li\u003e\n\u003cli\u003eV to I phase compensation\u003c\/li\u003e\n\u003cli\u003eSingle-supply ground reference signal\u003c\/li\u003e\n\u003cli\u003e2.5V on-chip reference voltage (maximum temperature drift 60ppm \/ ¡æ)\u003c\/li\u003e\n\u003cli\u003eSimple three-wire digital serial interface\u003c\/li\u003e\n\u003cli\u003eWatchdog Timer\u003c\/li\u003e\n\u003cli\u003eWith a power monitor\u003c\/li\u003e\n\u003cli\u003ePower supply configuration\u003c\/li\u003e\n\u003cli\u003eVA + = +5 V; VA- = 0V; VD + = + 3.3V ~ + 5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*CS5460A Power Energy Module\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e"} -
$10.89{"id":4518013632599,"title":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module","handle":"cs5460a-serial-single-phase-bi-directional-power-energy-metering-adc-module","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe CS5460A is a converter that contains two ¦¤¦² analog-to-digital converters (ADC), high-speed power calculation and a serial interface To-digital converter with a high degree of integration\u003c\/li\u003e\n\u003cli\u003eIt can be precise measurement and calculation of active energy, instantaneous power, IRMS and VRMS,For the development of single-phase 2-wire or 3-wire meter\u003c\/li\u003e\n\u003cli\u003eCS5460A the current can be measured using a low-cost shunt or transformer Voltage is measured with a voltage divider resistor or a voltage transformer\u003c\/li\u003e\n\u003cli\u003eCS5460A with the microcontroller to communicate with the bi-directional serial port, the chip pulse input The frequency is proportional to the active energy\u003c\/li\u003e\n\u003cli\u003eCS5460A is convenient On-chip AC \/ DC system calibration.The \"bootstrap\" feature allows the CS5460A to work independently, After the system power automatically initialized. In the self-boot mode,the CS5460A reads the calibration number from an external EEPROM according to the start instruction\u003c\/li\u003e\n\u003cli\u003eThe CS5460A operates when using this mode when no additional micro-controller, so when the meter for large quantities Residential energy measurement, can reduce the cost of the meter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003ePower Data Linearity: Linearity in 1000: 1 dynamic range Is ¡À 0.1%\u003c\/li\u003e\n\u003cli\u003eOn-chip functions: can measure power (active), I * V, IRMS and VRMS, with power - pulse conversion function\u003c\/li\u003e\n\u003cli\u003eCan be \"self-guided\" from the serial EEPROM smart, not micro Controller\u003c\/li\u003e\n\u003cli\u003eAC or DC system calibration\u003c\/li\u003e\n\u003cli\u003eA mechanical counter \/ stepper motor driver\u003c\/li\u003e\n\u003cli\u003eIn line with IEC687 \/ 1036, JIS industry standards\u003c\/li\u003e\n\u003cli\u003ePower consumption \u0026lt;12mW\u003c\/li\u003e\n\u003cli\u003eOptimized shunt interface\u003c\/li\u003e\n\u003cli\u003eV to I phase compensation\u003c\/li\u003e\n\u003cli\u003eSingle-supply ground reference signal\u003c\/li\u003e\n\u003cli\u003e2.5V on-chip reference voltage (maximum temperature drift 60ppm \/ ¡æ)\u003c\/li\u003e\n\u003cli\u003eSimple three-wire digital serial interface\u003c\/li\u003e\n\u003cli\u003eWatchdog Timer\u003c\/li\u003e\n\u003cli\u003eWith a power monitor\u003c\/li\u003e\n\u003cli\u003ePower supply configuration\u003c\/li\u003e\n\u003cli\u003eVA + = +5 V; VA- = 0V; VD + = + 3.3V ~ + 5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*CS5460A Power Energy Module\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","published_at":"2020-05-20T02:38:12+08:00","created_at":"2020-05-20T02:38:14+08:00","vendor":"DIYTECH","type":"Testers","tags":[],"price":533,"price_min":533,"price_max":1582,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179539050583,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3846-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module - 3pcs","public_title":"3pcs","options":["3pcs"],"price":533,"weight":21,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179539083351,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3846-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1582,"weight":70,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840","options":["Batch"],"media":[{"alt":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module","id":6257385766999,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe CS5460A is a converter that contains two ¦¤¦² analog-to-digital converters (ADC), high-speed power calculation and a serial interface To-digital converter with a high degree of integration\u003c\/li\u003e\n\u003cli\u003eIt can be precise measurement and calculation of active energy, instantaneous power, IRMS and VRMS,For the development of single-phase 2-wire or 3-wire meter\u003c\/li\u003e\n\u003cli\u003eCS5460A the current can be measured using a low-cost shunt or transformer Voltage is measured with a voltage divider resistor or a voltage transformer\u003c\/li\u003e\n\u003cli\u003eCS5460A with the microcontroller to communicate with the bi-directional serial port, the chip pulse input The frequency is proportional to the active energy\u003c\/li\u003e\n\u003cli\u003eCS5460A is convenient On-chip AC \/ DC system calibration.The \"bootstrap\" feature allows the CS5460A to work independently, After the system power automatically initialized. In the self-boot mode,the CS5460A reads the calibration number from an external EEPROM according to the start instruction\u003c\/li\u003e\n\u003cli\u003eThe CS5460A operates when using this mode when no additional micro-controller, so when the meter for large quantities Residential energy measurement, can reduce the cost of the meter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003ePower Data Linearity: Linearity in 1000: 1 dynamic range Is ¡À 0.1%\u003c\/li\u003e\n\u003cli\u003eOn-chip functions: can measure power (active), I * V, IRMS and VRMS, with power - pulse conversion function\u003c\/li\u003e\n\u003cli\u003eCan be \"self-guided\" from the serial EEPROM smart, not micro Controller\u003c\/li\u003e\n\u003cli\u003eAC or DC system calibration\u003c\/li\u003e\n\u003cli\u003eA mechanical counter \/ stepper motor driver\u003c\/li\u003e\n\u003cli\u003eIn line with IEC687 \/ 1036, JIS industry standards\u003c\/li\u003e\n\u003cli\u003ePower consumption \u0026lt;12mW\u003c\/li\u003e\n\u003cli\u003eOptimized shunt interface\u003c\/li\u003e\n\u003cli\u003eV to I phase compensation\u003c\/li\u003e\n\u003cli\u003eSingle-supply ground reference signal\u003c\/li\u003e\n\u003cli\u003e2.5V on-chip reference voltage (maximum temperature drift 60ppm \/ ¡æ)\u003c\/li\u003e\n\u003cli\u003eSimple three-wire digital serial interface\u003c\/li\u003e\n\u003cli\u003eWatchdog Timer\u003c\/li\u003e\n\u003cli\u003eWith a power monitor\u003c\/li\u003e\n\u003cli\u003ePower supply configuration\u003c\/li\u003e\n\u003cli\u003eVA + = +5 V; VA- = 0V; VD + = + 3.3V ~ + 5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*CS5460A Power Energy Module\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e"} -
$9.89{"id":4518013632599,"title":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module","handle":"cs5460a-serial-single-phase-bi-directional-power-energy-metering-adc-module","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe CS5460A is a converter that contains two ¦¤¦² analog-to-digital converters (ADC), high-speed power calculation and a serial interface To-digital converter with a high degree of integration\u003c\/li\u003e\n\u003cli\u003eIt can be precise measurement and calculation of active energy, instantaneous power, IRMS and VRMS,For the development of single-phase 2-wire or 3-wire meter\u003c\/li\u003e\n\u003cli\u003eCS5460A the current can be measured using a low-cost shunt or transformer Voltage is measured with a voltage divider resistor or a voltage transformer\u003c\/li\u003e\n\u003cli\u003eCS5460A with the microcontroller to communicate with the bi-directional serial port, the chip pulse input The frequency is proportional to the active energy\u003c\/li\u003e\n\u003cli\u003eCS5460A is convenient On-chip AC \/ DC system calibration.The \"bootstrap\" feature allows the CS5460A to work independently, After the system power automatically initialized. In the self-boot mode,the CS5460A reads the calibration number from an external EEPROM according to the start instruction\u003c\/li\u003e\n\u003cli\u003eThe CS5460A operates when using this mode when no additional micro-controller, so when the meter for large quantities Residential energy measurement, can reduce the cost of the meter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003ePower Data Linearity: Linearity in 1000: 1 dynamic range Is ¡À 0.1%\u003c\/li\u003e\n\u003cli\u003eOn-chip functions: can measure power (active), I * V, IRMS and VRMS, with power - pulse conversion function\u003c\/li\u003e\n\u003cli\u003eCan be \"self-guided\" from the serial EEPROM smart, not micro Controller\u003c\/li\u003e\n\u003cli\u003eAC or DC system calibration\u003c\/li\u003e\n\u003cli\u003eA mechanical counter \/ stepper motor driver\u003c\/li\u003e\n\u003cli\u003eIn line with IEC687 \/ 1036, JIS industry standards\u003c\/li\u003e\n\u003cli\u003ePower consumption \u0026lt;12mW\u003c\/li\u003e\n\u003cli\u003eOptimized shunt interface\u003c\/li\u003e\n\u003cli\u003eV to I phase compensation\u003c\/li\u003e\n\u003cli\u003eSingle-supply ground reference signal\u003c\/li\u003e\n\u003cli\u003e2.5V on-chip reference voltage (maximum temperature drift 60ppm \/ ¡æ)\u003c\/li\u003e\n\u003cli\u003eSimple three-wire digital serial interface\u003c\/li\u003e\n\u003cli\u003eWatchdog Timer\u003c\/li\u003e\n\u003cli\u003eWith a power monitor\u003c\/li\u003e\n\u003cli\u003ePower supply configuration\u003c\/li\u003e\n\u003cli\u003eVA + = +5 V; VA- = 0V; VD + = + 3.3V ~ + 5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*CS5460A Power Energy Module\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","published_at":"2020-05-20T02:38:12+08:00","created_at":"2020-05-20T02:38:14+08:00","vendor":"DIYTECH","type":"Testers","tags":[],"price":533,"price_min":533,"price_max":1582,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179539050583,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3846-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module - 3pcs","public_title":"3pcs","options":["3pcs"],"price":533,"weight":21,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179539083351,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3846-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1582,"weight":70,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840","options":["Batch"],"media":[{"alt":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module","id":6257385766999,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe CS5460A is a converter that contains two ¦¤¦² analog-to-digital converters (ADC), high-speed power calculation and a serial interface To-digital converter with a high degree of integration\u003c\/li\u003e\n\u003cli\u003eIt can be precise measurement and calculation of active energy, instantaneous power, IRMS and VRMS,For the development of single-phase 2-wire or 3-wire meter\u003c\/li\u003e\n\u003cli\u003eCS5460A the current can be measured using a low-cost shunt or transformer Voltage is measured with a voltage divider resistor or a voltage transformer\u003c\/li\u003e\n\u003cli\u003eCS5460A with the microcontroller to communicate with the bi-directional serial port, the chip pulse input The frequency is proportional to the active energy\u003c\/li\u003e\n\u003cli\u003eCS5460A is convenient On-chip AC \/ DC system calibration.The \"bootstrap\" feature allows the CS5460A to work independently, After the system power automatically initialized. In the self-boot mode,the CS5460A reads the calibration number from an external EEPROM according to the start instruction\u003c\/li\u003e\n\u003cli\u003eThe CS5460A operates when using this mode when no additional micro-controller, so when the meter for large quantities Residential energy measurement, can reduce the cost of the meter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003ePower Data Linearity: Linearity in 1000: 1 dynamic range Is ¡À 0.1%\u003c\/li\u003e\n\u003cli\u003eOn-chip functions: can measure power (active), I * V, IRMS and VRMS, with power - pulse conversion function\u003c\/li\u003e\n\u003cli\u003eCan be \"self-guided\" from the serial EEPROM smart, not micro Controller\u003c\/li\u003e\n\u003cli\u003eAC or DC system calibration\u003c\/li\u003e\n\u003cli\u003eA mechanical counter \/ stepper motor driver\u003c\/li\u003e\n\u003cli\u003eIn line with IEC687 \/ 1036, JIS industry standards\u003c\/li\u003e\n\u003cli\u003ePower consumption \u0026lt;12mW\u003c\/li\u003e\n\u003cli\u003eOptimized shunt interface\u003c\/li\u003e\n\u003cli\u003eV to I phase compensation\u003c\/li\u003e\n\u003cli\u003eSingle-supply ground reference signal\u003c\/li\u003e\n\u003cli\u003e2.5V on-chip reference voltage (maximum temperature drift 60ppm \/ ¡æ)\u003c\/li\u003e\n\u003cli\u003eSimple three-wire digital serial interface\u003c\/li\u003e\n\u003cli\u003eWatchdog Timer\u003c\/li\u003e\n\u003cli\u003eWith a power monitor\u003c\/li\u003e\n\u003cli\u003ePower supply configuration\u003c\/li\u003e\n\u003cli\u003eVA + = +5 V; VA- = 0V; VD + = + 3.3V ~ + 5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*CS5460A Power Energy Module\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e"} -
$9.89{"id":4518013632599,"title":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module","handle":"cs5460a-serial-single-phase-bi-directional-power-energy-metering-adc-module","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe CS5460A is a converter that contains two ¦¤¦² analog-to-digital converters (ADC), high-speed power calculation and a serial interface To-digital converter with a high degree of integration\u003c\/li\u003e\n\u003cli\u003eIt can be precise measurement and calculation of active energy, instantaneous power, IRMS and VRMS,For the development of single-phase 2-wire or 3-wire meter\u003c\/li\u003e\n\u003cli\u003eCS5460A the current can be measured using a low-cost shunt or transformer Voltage is measured with a voltage divider resistor or a voltage transformer\u003c\/li\u003e\n\u003cli\u003eCS5460A with the microcontroller to communicate with the bi-directional serial port, the chip pulse input The frequency is proportional to the active energy\u003c\/li\u003e\n\u003cli\u003eCS5460A is convenient On-chip AC \/ DC system calibration.The \"bootstrap\" feature allows the CS5460A to work independently, After the system power automatically initialized. In the self-boot mode,the CS5460A reads the calibration number from an external EEPROM according to the start instruction\u003c\/li\u003e\n\u003cli\u003eThe CS5460A operates when using this mode when no additional micro-controller, so when the meter for large quantities Residential energy measurement, can reduce the cost of the meter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003ePower Data Linearity: Linearity in 1000: 1 dynamic range Is ¡À 0.1%\u003c\/li\u003e\n\u003cli\u003eOn-chip functions: can measure power (active), I * V, IRMS and VRMS, with power - pulse conversion function\u003c\/li\u003e\n\u003cli\u003eCan be \"self-guided\" from the serial EEPROM smart, not micro Controller\u003c\/li\u003e\n\u003cli\u003eAC or DC system calibration\u003c\/li\u003e\n\u003cli\u003eA mechanical counter \/ stepper motor driver\u003c\/li\u003e\n\u003cli\u003eIn line with IEC687 \/ 1036, JIS industry standards\u003c\/li\u003e\n\u003cli\u003ePower consumption \u0026lt;12mW\u003c\/li\u003e\n\u003cli\u003eOptimized shunt interface\u003c\/li\u003e\n\u003cli\u003eV to I phase compensation\u003c\/li\u003e\n\u003cli\u003eSingle-supply ground reference signal\u003c\/li\u003e\n\u003cli\u003e2.5V on-chip reference voltage (maximum temperature drift 60ppm \/ ¡æ)\u003c\/li\u003e\n\u003cli\u003eSimple three-wire digital serial interface\u003c\/li\u003e\n\u003cli\u003eWatchdog Timer\u003c\/li\u003e\n\u003cli\u003eWith a power monitor\u003c\/li\u003e\n\u003cli\u003ePower supply configuration\u003c\/li\u003e\n\u003cli\u003eVA + = +5 V; VA- = 0V; VD + = + 3.3V ~ + 5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*CS5460A Power Energy Module\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","published_at":"2020-05-20T02:38:12+08:00","created_at":"2020-05-20T02:38:14+08:00","vendor":"DIYTECH","type":"Testers","tags":[],"price":533,"price_min":533,"price_max":1582,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179539050583,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT3846-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module - 3pcs","public_title":"3pcs","options":["3pcs"],"price":533,"weight":21,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179539083351,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT3846-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module - 10pcs","public_title":"10pcs","options":["10pcs"],"price":1582,"weight":70,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840","options":["Batch"],"media":[{"alt":"CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module","id":6257385766999,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1528786064_AA6ta.jpg?v=1592419840","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe CS5460A is a converter that contains two ¦¤¦² analog-to-digital converters (ADC), high-speed power calculation and a serial interface To-digital converter with a high degree of integration\u003c\/li\u003e\n\u003cli\u003eIt can be precise measurement and calculation of active energy, instantaneous power, IRMS and VRMS,For the development of single-phase 2-wire or 3-wire meter\u003c\/li\u003e\n\u003cli\u003eCS5460A the current can be measured using a low-cost shunt or transformer Voltage is measured with a voltage divider resistor or a voltage transformer\u003c\/li\u003e\n\u003cli\u003eCS5460A with the microcontroller to communicate with the bi-directional serial port, the chip pulse input The frequency is proportional to the active energy\u003c\/li\u003e\n\u003cli\u003eCS5460A is convenient On-chip AC \/ DC system calibration.The \"bootstrap\" feature allows the CS5460A to work independently, After the system power automatically initialized. In the self-boot mode,the CS5460A reads the calibration number from an external EEPROM according to the start instruction\u003c\/li\u003e\n\u003cli\u003eThe CS5460A operates when using this mode when no additional micro-controller, so when the meter for large quantities Residential energy measurement, can reduce the cost of the meter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003ePower Data Linearity: Linearity in 1000: 1 dynamic range Is ¡À 0.1%\u003c\/li\u003e\n\u003cli\u003eOn-chip functions: can measure power (active), I * V, IRMS and VRMS, with power - pulse conversion function\u003c\/li\u003e\n\u003cli\u003eCan be \"self-guided\" from the serial EEPROM smart, not micro Controller\u003c\/li\u003e\n\u003cli\u003eAC or DC system calibration\u003c\/li\u003e\n\u003cli\u003eA mechanical counter \/ stepper motor driver\u003c\/li\u003e\n\u003cli\u003eIn line with IEC687 \/ 1036, JIS industry standards\u003c\/li\u003e\n\u003cli\u003ePower consumption \u0026lt;12mW\u003c\/li\u003e\n\u003cli\u003eOptimized shunt interface\u003c\/li\u003e\n\u003cli\u003eV to I phase compensation\u003c\/li\u003e\n\u003cli\u003eSingle-supply ground reference signal\u003c\/li\u003e\n\u003cli\u003e2.5V on-chip reference voltage (maximum temperature drift 60ppm \/ ¡æ)\u003c\/li\u003e\n\u003cli\u003eSimple three-wire digital serial interface\u003c\/li\u003e\n\u003cli\u003eWatchdog Timer\u003c\/li\u003e\n\u003cli\u003eWith a power monitor\u003c\/li\u003e\n\u003cli\u003ePower supply configuration\u003c\/li\u003e\n\u003cli\u003eVA + = +5 V; VA- = 0V; VD + = + 3.3V ~ + 5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*CS5460A Power Energy Module\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e"}
