30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V
30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V
brand: DIYTECH SKU:DT2848-03
Regular price
$3.01
![]()
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancyservice@diytech.cc
Instructions for use:
Module size 40mm * 10 * 1.2 (mm), for width> = 10mm of the hard light or other lamps;
Using a wide voltage work program, the input voltage 9V to 24V can be,
Note that the output load voltage is approximately equal to the input voltage;
Module anti-interference and self-adaptability is better, widely used in civilian hard-light type control
The status of this version LED is always on.
This series is a four-in-one version of the model, The default factory setting is one-way dimming.
Description:
1. Input voltage: 9v-24v
2. Output voltage: 9v-24v
3. Load power: 30W
4. Load current: 3A
5. Standby current: 10mA
6. Standby power consumption: 0.1w
7. Operating temperature: -20 a??~ 65 a??
8. Type: Touch_S (L40W10)
9. Size: 40mm * 10mm * 1.2mm
(Note: test conditions Vin = 12V)
1.Touch_Sensor_S00 (general switch):
S00 mode, fast touch switch lamp on / off state, no dimming function. Effect gradient.
2.Touch_Sensor_S01 (Unidirectional dimming):
S01 mode, fast touch switch lamps on / off state;
In the case of open, long touch to enter one-way dimming
(keep touching, dimming to maximum or minimum brightness, automatically stop dimming),
Let go lock the brightness,
The switching brightness is the last lock brightness.
In the off condition, the long touch will be dimmed
from the previous brightness to the brighter direction.
Effect gradient.
3.Touch_Sensor_S02 (Cycle Dimming)
S02 mode, fast touch switch lighting on / off state;
In the case of open, long touch into the cycle dimming (keep touching, dimming to the highest or lowest brightness,
4.automatically in the opposite direction of light, so the cycle), let go lock the brightness,
The switching brightness is the last lock brightness.
In the off condition, the long touch will be dimmed from the
previous brightness to the brighter direction. Effect gradient.
Touch_Sensor_S03 (three-segment dimming)
S03 mode, fast touch switch lighting status. Brightness of three,
respectively, 30%, 60%, 100%, switching effect gradient.
Note:
It is required to install and then power on. If the power supply is installed,
May change the environmental parameters, may affect the sensitivity.
Touch spring installation, please avoid contact
with the electromagnetic signal changes in the complex contacts,
Try to avoid the use of heavy water for vapor environment,
to prevent possible malfunctions.
Please understand the product operating parameters before use.
Package Included:
1PCS *9V-24V 30W Touch Switch Capacitive Touch Sensor Module
Other Customers also buy:
-
$14.69{"id":4518042927191,"title":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V","handle":"30w-touch-sensor-switch-capacitive-touch-module-led-dimming-control-board-9v-24v","description":"\u003cp\u003e\u003cstrong\u003eInstructions for use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eModule size 40mm * 10 * 1.2 (mm), for width\u0026gt; = 10mm of the hard light or other lamps;\u003cbr\u003eUsing a wide voltage work program, the input voltage 9V to 24V can be,\u003cbr\u003eNote that the output load voltage is approximately equal to the input voltage;\u003cbr\u003eModule anti-interference and self-adaptability is better, widely used in civilian hard-light type control\u003cbr\u003eThe status of this version LED is always on.\u003cbr\u003eThis series is a four-in-one version of the model, The default factory setting is one-way dimming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. Input voltage: 9v-24v\u003cbr\u003e2. Output voltage: 9v-24v\u003cbr\u003e3. Load power: 30W\u003cbr\u003e4. Load current: 3A\u003cbr\u003e5. Standby current: 10mA\u003cbr\u003e6. Standby power consumption: 0.1w\u003cbr\u003e7. Operating temperature: -20 a??~ 65 a??\u003cbr\u003e8. Type: Touch_S (L40W10)\u003cbr\u003e9. Size: 40mm * 10mm * 1.2mm\u003cbr\u003e(Note: test conditions Vin = 12V)\u003cbr\u003e\u003cbr\u003e1.Touch_Sensor_S00 (general switch):\u003cbr\u003eS00 mode, fast touch switch lamp on \/ off state, no dimming function. Effect gradient.\u003cbr\u003e2.Touch_Sensor_S01 (Unidirectional dimming):\u003cbr\u003eS01 mode, fast touch switch lamps on \/ off state;\u003cbr\u003eIn the case of open, long touch to enter one-way dimming\u003cbr\u003e(keep touching, dimming to maximum or minimum brightness, automatically stop dimming),\u003cbr\u003eLet go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed\u003cbr\u003efrom the previous brightness to the brighter direction.\u003cbr\u003eEffect gradient.\u003cbr\u003e3.Touch_Sensor_S02 (Cycle Dimming)\u003cbr\u003eS02 mode, fast touch switch lighting on \/ off state;\u003cbr\u003eIn the case of open, long touch into the cycle dimming (keep touching, dimming to the highest or lowest brightness,\u003cbr\u003e4.automatically in the opposite direction of light, so the cycle), let go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed from the\u003cbr\u003eprevious brightness to the brighter direction. Effect gradient.\u003cbr\u003eTouch_Sensor_S03 (three-segment dimming)\u003cbr\u003eS03 mode, fast touch switch lighting status. Brightness of three,\u003cbr\u003erespectively, 30%, 60%, 100%, switching effect gradient.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIt is required to install and then power on. If the power supply is installed,\u003cbr\u003eMay change the environmental parameters, may affect the sensitivity.\u003cbr\u003eTouch spring installation, please avoid contact\u003cbr\u003ewith the electromagnetic signal changes in the complex contacts,\u003cbr\u003eTry to avoid the use of heavy water for vapor environment,\u003cbr\u003eto prevent possible malfunctions.\u003cbr\u003ePlease understand the product operating parameters before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1PCS *9V-24V 30W Touch Switch Capacitive Touch Sensor Module\u003c\/p\u003e","published_at":"2020-05-20T02:54:13+08:00","created_at":"2020-05-20T02:54:15+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":[],"price":301,"price_min":301,"price_max":892,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179563593815,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT2848-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V - 3pcs","public_title":"3pcs","options":["3pcs"],"price":301,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179563626583,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT2848-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V - 10pcs","public_title":"10pcs","options":["10pcs"],"price":892,"weight":120,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011","options":["Batch"],"media":[{"alt":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V","id":6257475190871,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eInstructions for use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eModule size 40mm * 10 * 1.2 (mm), for width\u0026gt; = 10mm of the hard light or other lamps;\u003cbr\u003eUsing a wide voltage work program, the input voltage 9V to 24V can be,\u003cbr\u003eNote that the output load voltage is approximately equal to the input voltage;\u003cbr\u003eModule anti-interference and self-adaptability is better, widely used in civilian hard-light type control\u003cbr\u003eThe status of this version LED is always on.\u003cbr\u003eThis series is a four-in-one version of the model, The default factory setting is one-way dimming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. Input voltage: 9v-24v\u003cbr\u003e2. Output voltage: 9v-24v\u003cbr\u003e3. Load power: 30W\u003cbr\u003e4. Load current: 3A\u003cbr\u003e5. Standby current: 10mA\u003cbr\u003e6. Standby power consumption: 0.1w\u003cbr\u003e7. Operating temperature: -20 a??~ 65 a??\u003cbr\u003e8. Type: Touch_S (L40W10)\u003cbr\u003e9. Size: 40mm * 10mm * 1.2mm\u003cbr\u003e(Note: test conditions Vin = 12V)\u003cbr\u003e\u003cbr\u003e1.Touch_Sensor_S00 (general switch):\u003cbr\u003eS00 mode, fast touch switch lamp on \/ off state, no dimming function. Effect gradient.\u003cbr\u003e2.Touch_Sensor_S01 (Unidirectional dimming):\u003cbr\u003eS01 mode, fast touch switch lamps on \/ off state;\u003cbr\u003eIn the case of open, long touch to enter one-way dimming\u003cbr\u003e(keep touching, dimming to maximum or minimum brightness, automatically stop dimming),\u003cbr\u003eLet go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed\u003cbr\u003efrom the previous brightness to the brighter direction.\u003cbr\u003eEffect gradient.\u003cbr\u003e3.Touch_Sensor_S02 (Cycle Dimming)\u003cbr\u003eS02 mode, fast touch switch lighting on \/ off state;\u003cbr\u003eIn the case of open, long touch into the cycle dimming (keep touching, dimming to the highest or lowest brightness,\u003cbr\u003e4.automatically in the opposite direction of light, so the cycle), let go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed from the\u003cbr\u003eprevious brightness to the brighter direction. Effect gradient.\u003cbr\u003eTouch_Sensor_S03 (three-segment dimming)\u003cbr\u003eS03 mode, fast touch switch lighting status. Brightness of three,\u003cbr\u003erespectively, 30%, 60%, 100%, switching effect gradient.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIt is required to install and then power on. If the power supply is installed,\u003cbr\u003eMay change the environmental parameters, may affect the sensitivity.\u003cbr\u003eTouch spring installation, please avoid contact\u003cbr\u003ewith the electromagnetic signal changes in the complex contacts,\u003cbr\u003eTry to avoid the use of heavy water for vapor environment,\u003cbr\u003eto prevent possible malfunctions.\u003cbr\u003ePlease understand the product operating parameters before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1PCS *9V-24V 30W Touch Switch Capacitive Touch Sensor Module\u003c\/p\u003e"} -
$9.65{"id":4518042927191,"title":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V","handle":"30w-touch-sensor-switch-capacitive-touch-module-led-dimming-control-board-9v-24v","description":"\u003cp\u003e\u003cstrong\u003eInstructions for use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eModule size 40mm * 10 * 1.2 (mm), for width\u0026gt; = 10mm of the hard light or other lamps;\u003cbr\u003eUsing a wide voltage work program, the input voltage 9V to 24V can be,\u003cbr\u003eNote that the output load voltage is approximately equal to the input voltage;\u003cbr\u003eModule anti-interference and self-adaptability is better, widely used in civilian hard-light type control\u003cbr\u003eThe status of this version LED is always on.\u003cbr\u003eThis series is a four-in-one version of the model, The default factory setting is one-way dimming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. Input voltage: 9v-24v\u003cbr\u003e2. Output voltage: 9v-24v\u003cbr\u003e3. Load power: 30W\u003cbr\u003e4. Load current: 3A\u003cbr\u003e5. Standby current: 10mA\u003cbr\u003e6. Standby power consumption: 0.1w\u003cbr\u003e7. Operating temperature: -20 a??~ 65 a??\u003cbr\u003e8. Type: Touch_S (L40W10)\u003cbr\u003e9. Size: 40mm * 10mm * 1.2mm\u003cbr\u003e(Note: test conditions Vin = 12V)\u003cbr\u003e\u003cbr\u003e1.Touch_Sensor_S00 (general switch):\u003cbr\u003eS00 mode, fast touch switch lamp on \/ off state, no dimming function. Effect gradient.\u003cbr\u003e2.Touch_Sensor_S01 (Unidirectional dimming):\u003cbr\u003eS01 mode, fast touch switch lamps on \/ off state;\u003cbr\u003eIn the case of open, long touch to enter one-way dimming\u003cbr\u003e(keep touching, dimming to maximum or minimum brightness, automatically stop dimming),\u003cbr\u003eLet go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed\u003cbr\u003efrom the previous brightness to the brighter direction.\u003cbr\u003eEffect gradient.\u003cbr\u003e3.Touch_Sensor_S02 (Cycle Dimming)\u003cbr\u003eS02 mode, fast touch switch lighting on \/ off state;\u003cbr\u003eIn the case of open, long touch into the cycle dimming (keep touching, dimming to the highest or lowest brightness,\u003cbr\u003e4.automatically in the opposite direction of light, so the cycle), let go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed from the\u003cbr\u003eprevious brightness to the brighter direction. Effect gradient.\u003cbr\u003eTouch_Sensor_S03 (three-segment dimming)\u003cbr\u003eS03 mode, fast touch switch lighting status. Brightness of three,\u003cbr\u003erespectively, 30%, 60%, 100%, switching effect gradient.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIt is required to install and then power on. If the power supply is installed,\u003cbr\u003eMay change the environmental parameters, may affect the sensitivity.\u003cbr\u003eTouch spring installation, please avoid contact\u003cbr\u003ewith the electromagnetic signal changes in the complex contacts,\u003cbr\u003eTry to avoid the use of heavy water for vapor environment,\u003cbr\u003eto prevent possible malfunctions.\u003cbr\u003ePlease understand the product operating parameters before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1PCS *9V-24V 30W Touch Switch Capacitive Touch Sensor Module\u003c\/p\u003e","published_at":"2020-05-20T02:54:13+08:00","created_at":"2020-05-20T02:54:15+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":[],"price":301,"price_min":301,"price_max":892,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179563593815,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT2848-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V - 3pcs","public_title":"3pcs","options":["3pcs"],"price":301,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179563626583,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT2848-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V - 10pcs","public_title":"10pcs","options":["10pcs"],"price":892,"weight":120,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011","options":["Batch"],"media":[{"alt":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V","id":6257475190871,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eInstructions for use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eModule size 40mm * 10 * 1.2 (mm), for width\u0026gt; = 10mm of the hard light or other lamps;\u003cbr\u003eUsing a wide voltage work program, the input voltage 9V to 24V can be,\u003cbr\u003eNote that the output load voltage is approximately equal to the input voltage;\u003cbr\u003eModule anti-interference and self-adaptability is better, widely used in civilian hard-light type control\u003cbr\u003eThe status of this version LED is always on.\u003cbr\u003eThis series is a four-in-one version of the model, The default factory setting is one-way dimming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. Input voltage: 9v-24v\u003cbr\u003e2. Output voltage: 9v-24v\u003cbr\u003e3. Load power: 30W\u003cbr\u003e4. Load current: 3A\u003cbr\u003e5. Standby current: 10mA\u003cbr\u003e6. Standby power consumption: 0.1w\u003cbr\u003e7. Operating temperature: -20 a??~ 65 a??\u003cbr\u003e8. Type: Touch_S (L40W10)\u003cbr\u003e9. Size: 40mm * 10mm * 1.2mm\u003cbr\u003e(Note: test conditions Vin = 12V)\u003cbr\u003e\u003cbr\u003e1.Touch_Sensor_S00 (general switch):\u003cbr\u003eS00 mode, fast touch switch lamp on \/ off state, no dimming function. Effect gradient.\u003cbr\u003e2.Touch_Sensor_S01 (Unidirectional dimming):\u003cbr\u003eS01 mode, fast touch switch lamps on \/ off state;\u003cbr\u003eIn the case of open, long touch to enter one-way dimming\u003cbr\u003e(keep touching, dimming to maximum or minimum brightness, automatically stop dimming),\u003cbr\u003eLet go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed\u003cbr\u003efrom the previous brightness to the brighter direction.\u003cbr\u003eEffect gradient.\u003cbr\u003e3.Touch_Sensor_S02 (Cycle Dimming)\u003cbr\u003eS02 mode, fast touch switch lighting on \/ off state;\u003cbr\u003eIn the case of open, long touch into the cycle dimming (keep touching, dimming to the highest or lowest brightness,\u003cbr\u003e4.automatically in the opposite direction of light, so the cycle), let go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed from the\u003cbr\u003eprevious brightness to the brighter direction. Effect gradient.\u003cbr\u003eTouch_Sensor_S03 (three-segment dimming)\u003cbr\u003eS03 mode, fast touch switch lighting status. Brightness of three,\u003cbr\u003erespectively, 30%, 60%, 100%, switching effect gradient.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIt is required to install and then power on. If the power supply is installed,\u003cbr\u003eMay change the environmental parameters, may affect the sensitivity.\u003cbr\u003eTouch spring installation, please avoid contact\u003cbr\u003ewith the electromagnetic signal changes in the complex contacts,\u003cbr\u003eTry to avoid the use of heavy water for vapor environment,\u003cbr\u003eto prevent possible malfunctions.\u003cbr\u003ePlease understand the product operating parameters before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1PCS *9V-24V 30W Touch Switch Capacitive Touch Sensor Module\u003c\/p\u003e"} -
$7.21{"id":4518042927191,"title":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V","handle":"30w-touch-sensor-switch-capacitive-touch-module-led-dimming-control-board-9v-24v","description":"\u003cp\u003e\u003cstrong\u003eInstructions for use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eModule size 40mm * 10 * 1.2 (mm), for width\u0026gt; = 10mm of the hard light or other lamps;\u003cbr\u003eUsing a wide voltage work program, the input voltage 9V to 24V can be,\u003cbr\u003eNote that the output load voltage is approximately equal to the input voltage;\u003cbr\u003eModule anti-interference and self-adaptability is better, widely used in civilian hard-light type control\u003cbr\u003eThe status of this version LED is always on.\u003cbr\u003eThis series is a four-in-one version of the model, The default factory setting is one-way dimming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. Input voltage: 9v-24v\u003cbr\u003e2. Output voltage: 9v-24v\u003cbr\u003e3. Load power: 30W\u003cbr\u003e4. Load current: 3A\u003cbr\u003e5. Standby current: 10mA\u003cbr\u003e6. Standby power consumption: 0.1w\u003cbr\u003e7. Operating temperature: -20 a??~ 65 a??\u003cbr\u003e8. Type: Touch_S (L40W10)\u003cbr\u003e9. Size: 40mm * 10mm * 1.2mm\u003cbr\u003e(Note: test conditions Vin = 12V)\u003cbr\u003e\u003cbr\u003e1.Touch_Sensor_S00 (general switch):\u003cbr\u003eS00 mode, fast touch switch lamp on \/ off state, no dimming function. Effect gradient.\u003cbr\u003e2.Touch_Sensor_S01 (Unidirectional dimming):\u003cbr\u003eS01 mode, fast touch switch lamps on \/ off state;\u003cbr\u003eIn the case of open, long touch to enter one-way dimming\u003cbr\u003e(keep touching, dimming to maximum or minimum brightness, automatically stop dimming),\u003cbr\u003eLet go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed\u003cbr\u003efrom the previous brightness to the brighter direction.\u003cbr\u003eEffect gradient.\u003cbr\u003e3.Touch_Sensor_S02 (Cycle Dimming)\u003cbr\u003eS02 mode, fast touch switch lighting on \/ off state;\u003cbr\u003eIn the case of open, long touch into the cycle dimming (keep touching, dimming to the highest or lowest brightness,\u003cbr\u003e4.automatically in the opposite direction of light, so the cycle), let go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed from the\u003cbr\u003eprevious brightness to the brighter direction. Effect gradient.\u003cbr\u003eTouch_Sensor_S03 (three-segment dimming)\u003cbr\u003eS03 mode, fast touch switch lighting status. Brightness of three,\u003cbr\u003erespectively, 30%, 60%, 100%, switching effect gradient.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIt is required to install and then power on. If the power supply is installed,\u003cbr\u003eMay change the environmental parameters, may affect the sensitivity.\u003cbr\u003eTouch spring installation, please avoid contact\u003cbr\u003ewith the electromagnetic signal changes in the complex contacts,\u003cbr\u003eTry to avoid the use of heavy water for vapor environment,\u003cbr\u003eto prevent possible malfunctions.\u003cbr\u003ePlease understand the product operating parameters before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1PCS *9V-24V 30W Touch Switch Capacitive Touch Sensor Module\u003c\/p\u003e","published_at":"2020-05-20T02:54:13+08:00","created_at":"2020-05-20T02:54:15+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":[],"price":301,"price_min":301,"price_max":892,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179563593815,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT2848-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V - 3pcs","public_title":"3pcs","options":["3pcs"],"price":301,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179563626583,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT2848-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V - 10pcs","public_title":"10pcs","options":["10pcs"],"price":892,"weight":120,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011","options":["Batch"],"media":[{"alt":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V","id":6257475190871,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eInstructions for use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eModule size 40mm * 10 * 1.2 (mm), for width\u0026gt; = 10mm of the hard light or other lamps;\u003cbr\u003eUsing a wide voltage work program, the input voltage 9V to 24V can be,\u003cbr\u003eNote that the output load voltage is approximately equal to the input voltage;\u003cbr\u003eModule anti-interference and self-adaptability is better, widely used in civilian hard-light type control\u003cbr\u003eThe status of this version LED is always on.\u003cbr\u003eThis series is a four-in-one version of the model, The default factory setting is one-way dimming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. Input voltage: 9v-24v\u003cbr\u003e2. Output voltage: 9v-24v\u003cbr\u003e3. Load power: 30W\u003cbr\u003e4. Load current: 3A\u003cbr\u003e5. Standby current: 10mA\u003cbr\u003e6. Standby power consumption: 0.1w\u003cbr\u003e7. Operating temperature: -20 a??~ 65 a??\u003cbr\u003e8. Type: Touch_S (L40W10)\u003cbr\u003e9. Size: 40mm * 10mm * 1.2mm\u003cbr\u003e(Note: test conditions Vin = 12V)\u003cbr\u003e\u003cbr\u003e1.Touch_Sensor_S00 (general switch):\u003cbr\u003eS00 mode, fast touch switch lamp on \/ off state, no dimming function. Effect gradient.\u003cbr\u003e2.Touch_Sensor_S01 (Unidirectional dimming):\u003cbr\u003eS01 mode, fast touch switch lamps on \/ off state;\u003cbr\u003eIn the case of open, long touch to enter one-way dimming\u003cbr\u003e(keep touching, dimming to maximum or minimum brightness, automatically stop dimming),\u003cbr\u003eLet go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed\u003cbr\u003efrom the previous brightness to the brighter direction.\u003cbr\u003eEffect gradient.\u003cbr\u003e3.Touch_Sensor_S02 (Cycle Dimming)\u003cbr\u003eS02 mode, fast touch switch lighting on \/ off state;\u003cbr\u003eIn the case of open, long touch into the cycle dimming (keep touching, dimming to the highest or lowest brightness,\u003cbr\u003e4.automatically in the opposite direction of light, so the cycle), let go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed from the\u003cbr\u003eprevious brightness to the brighter direction. Effect gradient.\u003cbr\u003eTouch_Sensor_S03 (three-segment dimming)\u003cbr\u003eS03 mode, fast touch switch lighting status. Brightness of three,\u003cbr\u003erespectively, 30%, 60%, 100%, switching effect gradient.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIt is required to install and then power on. If the power supply is installed,\u003cbr\u003eMay change the environmental parameters, may affect the sensitivity.\u003cbr\u003eTouch spring installation, please avoid contact\u003cbr\u003ewith the electromagnetic signal changes in the complex contacts,\u003cbr\u003eTry to avoid the use of heavy water for vapor environment,\u003cbr\u003eto prevent possible malfunctions.\u003cbr\u003ePlease understand the product operating parameters before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1PCS *9V-24V 30W Touch Switch Capacitive Touch Sensor Module\u003c\/p\u003e"} -
$5.80{"id":4518042927191,"title":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V","handle":"30w-touch-sensor-switch-capacitive-touch-module-led-dimming-control-board-9v-24v","description":"\u003cp\u003e\u003cstrong\u003eInstructions for use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eModule size 40mm * 10 * 1.2 (mm), for width\u0026gt; = 10mm of the hard light or other lamps;\u003cbr\u003eUsing a wide voltage work program, the input voltage 9V to 24V can be,\u003cbr\u003eNote that the output load voltage is approximately equal to the input voltage;\u003cbr\u003eModule anti-interference and self-adaptability is better, widely used in civilian hard-light type control\u003cbr\u003eThe status of this version LED is always on.\u003cbr\u003eThis series is a four-in-one version of the model, The default factory setting is one-way dimming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. Input voltage: 9v-24v\u003cbr\u003e2. Output voltage: 9v-24v\u003cbr\u003e3. Load power: 30W\u003cbr\u003e4. Load current: 3A\u003cbr\u003e5. Standby current: 10mA\u003cbr\u003e6. Standby power consumption: 0.1w\u003cbr\u003e7. Operating temperature: -20 a??~ 65 a??\u003cbr\u003e8. Type: Touch_S (L40W10)\u003cbr\u003e9. Size: 40mm * 10mm * 1.2mm\u003cbr\u003e(Note: test conditions Vin = 12V)\u003cbr\u003e\u003cbr\u003e1.Touch_Sensor_S00 (general switch):\u003cbr\u003eS00 mode, fast touch switch lamp on \/ off state, no dimming function. Effect gradient.\u003cbr\u003e2.Touch_Sensor_S01 (Unidirectional dimming):\u003cbr\u003eS01 mode, fast touch switch lamps on \/ off state;\u003cbr\u003eIn the case of open, long touch to enter one-way dimming\u003cbr\u003e(keep touching, dimming to maximum or minimum brightness, automatically stop dimming),\u003cbr\u003eLet go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed\u003cbr\u003efrom the previous brightness to the brighter direction.\u003cbr\u003eEffect gradient.\u003cbr\u003e3.Touch_Sensor_S02 (Cycle Dimming)\u003cbr\u003eS02 mode, fast touch switch lighting on \/ off state;\u003cbr\u003eIn the case of open, long touch into the cycle dimming (keep touching, dimming to the highest or lowest brightness,\u003cbr\u003e4.automatically in the opposite direction of light, so the cycle), let go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed from the\u003cbr\u003eprevious brightness to the brighter direction. Effect gradient.\u003cbr\u003eTouch_Sensor_S03 (three-segment dimming)\u003cbr\u003eS03 mode, fast touch switch lighting status. Brightness of three,\u003cbr\u003erespectively, 30%, 60%, 100%, switching effect gradient.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIt is required to install and then power on. If the power supply is installed,\u003cbr\u003eMay change the environmental parameters, may affect the sensitivity.\u003cbr\u003eTouch spring installation, please avoid contact\u003cbr\u003ewith the electromagnetic signal changes in the complex contacts,\u003cbr\u003eTry to avoid the use of heavy water for vapor environment,\u003cbr\u003eto prevent possible malfunctions.\u003cbr\u003ePlease understand the product operating parameters before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1PCS *9V-24V 30W Touch Switch Capacitive Touch Sensor Module\u003c\/p\u003e","published_at":"2020-05-20T02:54:13+08:00","created_at":"2020-05-20T02:54:15+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":[],"price":301,"price_min":301,"price_max":892,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179563593815,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT2848-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V - 3pcs","public_title":"3pcs","options":["3pcs"],"price":301,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179563626583,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT2848-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V - 10pcs","public_title":"10pcs","options":["10pcs"],"price":892,"weight":120,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011","options":["Batch"],"media":[{"alt":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V","id":6257475190871,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eInstructions for use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eModule size 40mm * 10 * 1.2 (mm), for width\u0026gt; = 10mm of the hard light or other lamps;\u003cbr\u003eUsing a wide voltage work program, the input voltage 9V to 24V can be,\u003cbr\u003eNote that the output load voltage is approximately equal to the input voltage;\u003cbr\u003eModule anti-interference and self-adaptability is better, widely used in civilian hard-light type control\u003cbr\u003eThe status of this version LED is always on.\u003cbr\u003eThis series is a four-in-one version of the model, The default factory setting is one-way dimming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. Input voltage: 9v-24v\u003cbr\u003e2. Output voltage: 9v-24v\u003cbr\u003e3. Load power: 30W\u003cbr\u003e4. Load current: 3A\u003cbr\u003e5. Standby current: 10mA\u003cbr\u003e6. Standby power consumption: 0.1w\u003cbr\u003e7. Operating temperature: -20 a??~ 65 a??\u003cbr\u003e8. Type: Touch_S (L40W10)\u003cbr\u003e9. Size: 40mm * 10mm * 1.2mm\u003cbr\u003e(Note: test conditions Vin = 12V)\u003cbr\u003e\u003cbr\u003e1.Touch_Sensor_S00 (general switch):\u003cbr\u003eS00 mode, fast touch switch lamp on \/ off state, no dimming function. Effect gradient.\u003cbr\u003e2.Touch_Sensor_S01 (Unidirectional dimming):\u003cbr\u003eS01 mode, fast touch switch lamps on \/ off state;\u003cbr\u003eIn the case of open, long touch to enter one-way dimming\u003cbr\u003e(keep touching, dimming to maximum or minimum brightness, automatically stop dimming),\u003cbr\u003eLet go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed\u003cbr\u003efrom the previous brightness to the brighter direction.\u003cbr\u003eEffect gradient.\u003cbr\u003e3.Touch_Sensor_S02 (Cycle Dimming)\u003cbr\u003eS02 mode, fast touch switch lighting on \/ off state;\u003cbr\u003eIn the case of open, long touch into the cycle dimming (keep touching, dimming to the highest or lowest brightness,\u003cbr\u003e4.automatically in the opposite direction of light, so the cycle), let go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed from the\u003cbr\u003eprevious brightness to the brighter direction. Effect gradient.\u003cbr\u003eTouch_Sensor_S03 (three-segment dimming)\u003cbr\u003eS03 mode, fast touch switch lighting status. Brightness of three,\u003cbr\u003erespectively, 30%, 60%, 100%, switching effect gradient.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIt is required to install and then power on. If the power supply is installed,\u003cbr\u003eMay change the environmental parameters, may affect the sensitivity.\u003cbr\u003eTouch spring installation, please avoid contact\u003cbr\u003ewith the electromagnetic signal changes in the complex contacts,\u003cbr\u003eTry to avoid the use of heavy water for vapor environment,\u003cbr\u003eto prevent possible malfunctions.\u003cbr\u003ePlease understand the product operating parameters before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1PCS *9V-24V 30W Touch Switch Capacitive Touch Sensor Module\u003c\/p\u003e"} -
$3.80{"id":4518042927191,"title":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V","handle":"30w-touch-sensor-switch-capacitive-touch-module-led-dimming-control-board-9v-24v","description":"\u003cp\u003e\u003cstrong\u003eInstructions for use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eModule size 40mm * 10 * 1.2 (mm), for width\u0026gt; = 10mm of the hard light or other lamps;\u003cbr\u003eUsing a wide voltage work program, the input voltage 9V to 24V can be,\u003cbr\u003eNote that the output load voltage is approximately equal to the input voltage;\u003cbr\u003eModule anti-interference and self-adaptability is better, widely used in civilian hard-light type control\u003cbr\u003eThe status of this version LED is always on.\u003cbr\u003eThis series is a four-in-one version of the model, The default factory setting is one-way dimming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. Input voltage: 9v-24v\u003cbr\u003e2. Output voltage: 9v-24v\u003cbr\u003e3. Load power: 30W\u003cbr\u003e4. Load current: 3A\u003cbr\u003e5. Standby current: 10mA\u003cbr\u003e6. Standby power consumption: 0.1w\u003cbr\u003e7. Operating temperature: -20 a??~ 65 a??\u003cbr\u003e8. Type: Touch_S (L40W10)\u003cbr\u003e9. Size: 40mm * 10mm * 1.2mm\u003cbr\u003e(Note: test conditions Vin = 12V)\u003cbr\u003e\u003cbr\u003e1.Touch_Sensor_S00 (general switch):\u003cbr\u003eS00 mode, fast touch switch lamp on \/ off state, no dimming function. Effect gradient.\u003cbr\u003e2.Touch_Sensor_S01 (Unidirectional dimming):\u003cbr\u003eS01 mode, fast touch switch lamps on \/ off state;\u003cbr\u003eIn the case of open, long touch to enter one-way dimming\u003cbr\u003e(keep touching, dimming to maximum or minimum brightness, automatically stop dimming),\u003cbr\u003eLet go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed\u003cbr\u003efrom the previous brightness to the brighter direction.\u003cbr\u003eEffect gradient.\u003cbr\u003e3.Touch_Sensor_S02 (Cycle Dimming)\u003cbr\u003eS02 mode, fast touch switch lighting on \/ off state;\u003cbr\u003eIn the case of open, long touch into the cycle dimming (keep touching, dimming to the highest or lowest brightness,\u003cbr\u003e4.automatically in the opposite direction of light, so the cycle), let go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed from the\u003cbr\u003eprevious brightness to the brighter direction. Effect gradient.\u003cbr\u003eTouch_Sensor_S03 (three-segment dimming)\u003cbr\u003eS03 mode, fast touch switch lighting status. Brightness of three,\u003cbr\u003erespectively, 30%, 60%, 100%, switching effect gradient.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIt is required to install and then power on. If the power supply is installed,\u003cbr\u003eMay change the environmental parameters, may affect the sensitivity.\u003cbr\u003eTouch spring installation, please avoid contact\u003cbr\u003ewith the electromagnetic signal changes in the complex contacts,\u003cbr\u003eTry to avoid the use of heavy water for vapor environment,\u003cbr\u003eto prevent possible malfunctions.\u003cbr\u003ePlease understand the product operating parameters before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1PCS *9V-24V 30W Touch Switch Capacitive Touch Sensor Module\u003c\/p\u003e","published_at":"2020-05-20T02:54:13+08:00","created_at":"2020-05-20T02:54:15+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":[],"price":301,"price_min":301,"price_max":892,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179563593815,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT2848-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V - 3pcs","public_title":"3pcs","options":["3pcs"],"price":301,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179563626583,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT2848-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V - 10pcs","public_title":"10pcs","options":["10pcs"],"price":892,"weight":120,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011","options":["Batch"],"media":[{"alt":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V","id":6257475190871,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eInstructions for use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eModule size 40mm * 10 * 1.2 (mm), for width\u0026gt; = 10mm of the hard light or other lamps;\u003cbr\u003eUsing a wide voltage work program, the input voltage 9V to 24V can be,\u003cbr\u003eNote that the output load voltage is approximately equal to the input voltage;\u003cbr\u003eModule anti-interference and self-adaptability is better, widely used in civilian hard-light type control\u003cbr\u003eThe status of this version LED is always on.\u003cbr\u003eThis series is a four-in-one version of the model, The default factory setting is one-way dimming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. Input voltage: 9v-24v\u003cbr\u003e2. Output voltage: 9v-24v\u003cbr\u003e3. Load power: 30W\u003cbr\u003e4. Load current: 3A\u003cbr\u003e5. Standby current: 10mA\u003cbr\u003e6. Standby power consumption: 0.1w\u003cbr\u003e7. Operating temperature: -20 a??~ 65 a??\u003cbr\u003e8. Type: Touch_S (L40W10)\u003cbr\u003e9. Size: 40mm * 10mm * 1.2mm\u003cbr\u003e(Note: test conditions Vin = 12V)\u003cbr\u003e\u003cbr\u003e1.Touch_Sensor_S00 (general switch):\u003cbr\u003eS00 mode, fast touch switch lamp on \/ off state, no dimming function. Effect gradient.\u003cbr\u003e2.Touch_Sensor_S01 (Unidirectional dimming):\u003cbr\u003eS01 mode, fast touch switch lamps on \/ off state;\u003cbr\u003eIn the case of open, long touch to enter one-way dimming\u003cbr\u003e(keep touching, dimming to maximum or minimum brightness, automatically stop dimming),\u003cbr\u003eLet go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed\u003cbr\u003efrom the previous brightness to the brighter direction.\u003cbr\u003eEffect gradient.\u003cbr\u003e3.Touch_Sensor_S02 (Cycle Dimming)\u003cbr\u003eS02 mode, fast touch switch lighting on \/ off state;\u003cbr\u003eIn the case of open, long touch into the cycle dimming (keep touching, dimming to the highest or lowest brightness,\u003cbr\u003e4.automatically in the opposite direction of light, so the cycle), let go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed from the\u003cbr\u003eprevious brightness to the brighter direction. Effect gradient.\u003cbr\u003eTouch_Sensor_S03 (three-segment dimming)\u003cbr\u003eS03 mode, fast touch switch lighting status. Brightness of three,\u003cbr\u003erespectively, 30%, 60%, 100%, switching effect gradient.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIt is required to install and then power on. If the power supply is installed,\u003cbr\u003eMay change the environmental parameters, may affect the sensitivity.\u003cbr\u003eTouch spring installation, please avoid contact\u003cbr\u003ewith the electromagnetic signal changes in the complex contacts,\u003cbr\u003eTry to avoid the use of heavy water for vapor environment,\u003cbr\u003eto prevent possible malfunctions.\u003cbr\u003ePlease understand the product operating parameters before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1PCS *9V-24V 30W Touch Switch Capacitive Touch Sensor Module\u003c\/p\u003e"} -
$2.89{"id":4518042927191,"title":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V","handle":"30w-touch-sensor-switch-capacitive-touch-module-led-dimming-control-board-9v-24v","description":"\u003cp\u003e\u003cstrong\u003eInstructions for use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eModule size 40mm * 10 * 1.2 (mm), for width\u0026gt; = 10mm of the hard light or other lamps;\u003cbr\u003eUsing a wide voltage work program, the input voltage 9V to 24V can be,\u003cbr\u003eNote that the output load voltage is approximately equal to the input voltage;\u003cbr\u003eModule anti-interference and self-adaptability is better, widely used in civilian hard-light type control\u003cbr\u003eThe status of this version LED is always on.\u003cbr\u003eThis series is a four-in-one version of the model, The default factory setting is one-way dimming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. Input voltage: 9v-24v\u003cbr\u003e2. Output voltage: 9v-24v\u003cbr\u003e3. Load power: 30W\u003cbr\u003e4. Load current: 3A\u003cbr\u003e5. Standby current: 10mA\u003cbr\u003e6. Standby power consumption: 0.1w\u003cbr\u003e7. Operating temperature: -20 a??~ 65 a??\u003cbr\u003e8. Type: Touch_S (L40W10)\u003cbr\u003e9. Size: 40mm * 10mm * 1.2mm\u003cbr\u003e(Note: test conditions Vin = 12V)\u003cbr\u003e\u003cbr\u003e1.Touch_Sensor_S00 (general switch):\u003cbr\u003eS00 mode, fast touch switch lamp on \/ off state, no dimming function. Effect gradient.\u003cbr\u003e2.Touch_Sensor_S01 (Unidirectional dimming):\u003cbr\u003eS01 mode, fast touch switch lamps on \/ off state;\u003cbr\u003eIn the case of open, long touch to enter one-way dimming\u003cbr\u003e(keep touching, dimming to maximum or minimum brightness, automatically stop dimming),\u003cbr\u003eLet go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed\u003cbr\u003efrom the previous brightness to the brighter direction.\u003cbr\u003eEffect gradient.\u003cbr\u003e3.Touch_Sensor_S02 (Cycle Dimming)\u003cbr\u003eS02 mode, fast touch switch lighting on \/ off state;\u003cbr\u003eIn the case of open, long touch into the cycle dimming (keep touching, dimming to the highest or lowest brightness,\u003cbr\u003e4.automatically in the opposite direction of light, so the cycle), let go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed from the\u003cbr\u003eprevious brightness to the brighter direction. Effect gradient.\u003cbr\u003eTouch_Sensor_S03 (three-segment dimming)\u003cbr\u003eS03 mode, fast touch switch lighting status. Brightness of three,\u003cbr\u003erespectively, 30%, 60%, 100%, switching effect gradient.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIt is required to install and then power on. If the power supply is installed,\u003cbr\u003eMay change the environmental parameters, may affect the sensitivity.\u003cbr\u003eTouch spring installation, please avoid contact\u003cbr\u003ewith the electromagnetic signal changes in the complex contacts,\u003cbr\u003eTry to avoid the use of heavy water for vapor environment,\u003cbr\u003eto prevent possible malfunctions.\u003cbr\u003ePlease understand the product operating parameters before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1PCS *9V-24V 30W Touch Switch Capacitive Touch Sensor Module\u003c\/p\u003e","published_at":"2020-05-20T02:54:13+08:00","created_at":"2020-05-20T02:54:15+08:00","vendor":"DIYTECH","type":"Sensor Module","tags":[],"price":301,"price_min":301,"price_max":892,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179563593815,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT2848-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V - 3pcs","public_title":"3pcs","options":["3pcs"],"price":301,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179563626583,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT2848-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V - 10pcs","public_title":"10pcs","options":["10pcs"],"price":892,"weight":120,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011","options":["Batch"],"media":[{"alt":"30W Touch Sensor Switch Capacitive Touch Module LED Dimming Control Board 9V-24V","id":6257475190871,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1538130370_nko7I.jpg?v=1592420011","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eInstructions for use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eModule size 40mm * 10 * 1.2 (mm), for width\u0026gt; = 10mm of the hard light or other lamps;\u003cbr\u003eUsing a wide voltage work program, the input voltage 9V to 24V can be,\u003cbr\u003eNote that the output load voltage is approximately equal to the input voltage;\u003cbr\u003eModule anti-interference and self-adaptability is better, widely used in civilian hard-light type control\u003cbr\u003eThe status of this version LED is always on.\u003cbr\u003eThis series is a four-in-one version of the model, The default factory setting is one-way dimming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. Input voltage: 9v-24v\u003cbr\u003e2. Output voltage: 9v-24v\u003cbr\u003e3. Load power: 30W\u003cbr\u003e4. Load current: 3A\u003cbr\u003e5. Standby current: 10mA\u003cbr\u003e6. Standby power consumption: 0.1w\u003cbr\u003e7. Operating temperature: -20 a??~ 65 a??\u003cbr\u003e8. Type: Touch_S (L40W10)\u003cbr\u003e9. Size: 40mm * 10mm * 1.2mm\u003cbr\u003e(Note: test conditions Vin = 12V)\u003cbr\u003e\u003cbr\u003e1.Touch_Sensor_S00 (general switch):\u003cbr\u003eS00 mode, fast touch switch lamp on \/ off state, no dimming function. Effect gradient.\u003cbr\u003e2.Touch_Sensor_S01 (Unidirectional dimming):\u003cbr\u003eS01 mode, fast touch switch lamps on \/ off state;\u003cbr\u003eIn the case of open, long touch to enter one-way dimming\u003cbr\u003e(keep touching, dimming to maximum or minimum brightness, automatically stop dimming),\u003cbr\u003eLet go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed\u003cbr\u003efrom the previous brightness to the brighter direction.\u003cbr\u003eEffect gradient.\u003cbr\u003e3.Touch_Sensor_S02 (Cycle Dimming)\u003cbr\u003eS02 mode, fast touch switch lighting on \/ off state;\u003cbr\u003eIn the case of open, long touch into the cycle dimming (keep touching, dimming to the highest or lowest brightness,\u003cbr\u003e4.automatically in the opposite direction of light, so the cycle), let go lock the brightness,\u003cbr\u003eThe switching brightness is the last lock brightness.\u003cbr\u003eIn the off condition, the long touch will be dimmed from the\u003cbr\u003eprevious brightness to the brighter direction. Effect gradient.\u003cbr\u003eTouch_Sensor_S03 (three-segment dimming)\u003cbr\u003eS03 mode, fast touch switch lighting status. Brightness of three,\u003cbr\u003erespectively, 30%, 60%, 100%, switching effect gradient.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIt is required to install and then power on. If the power supply is installed,\u003cbr\u003eMay change the environmental parameters, may affect the sensitivity.\u003cbr\u003eTouch spring installation, please avoid contact\u003cbr\u003ewith the electromagnetic signal changes in the complex contacts,\u003cbr\u003eTry to avoid the use of heavy water for vapor environment,\u003cbr\u003eto prevent possible malfunctions.\u003cbr\u003ePlease understand the product operating parameters before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1PCS *9V-24V 30W Touch Switch Capacitive Touch Sensor Module\u003c\/p\u003e"}
