24V LED Automation Delay Timer Control Switch Relay Module with Case
24V LED Automation Delay Timer Control Switch Relay Module with Case
brand: DIYTECH SKU:DT5170-03
Regular price
$11.35
![]()
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancyservice@diytech.cc
Description£º
1. Increase the supply anti-reversefunction.
2. The use of opto isolated input and output,enhanced anti-jamming capabilit consumption.
3. Set parameter after power for ever memories.
4. Signal terminal voltage signal can be maintained for a longtime.
5. to ensure stability,industrial grade board,class PLC.
?
Parameters:
1. Size:64.2mm*34.8mm*18.5mm.
2. Relay Specifications:AC 220V 10A or DC 30V 10A.
3. Quiescent Current:20mA,Operating Current:50mA.
4. Working voltage:10~16V (if other ranges can be customized).
5. Signal voltage:4V~20V (if other ranges can be customized).
6. life:about100,000times,Working temperature:-40~85'C.
?
Working mode selection:
After power on,long press K12 seconds later into the select function mode, P1-1~P1-4 for choose.
P1-1 operating modes:a signal to trigger relay, time is up, the relay disconnect users,You can set relay time T,click K2 the hundreddigital tube starts flashing,then press K3, the hundred digital change; click K2 ten digital tube starts flashing,then press K3,ten digit changes;click K2 bit digital tube starts flashing, then press K3, single-digit change; then click K2; digital pipe does not blink,then press the K3, shifting the decimalpoint,the decimalpointin abitindicates 0-999minutesin ten represents 0 to 99.9 seconds withou tadecimalpointrepresents 0-999 seconds; goodchoice, bringing the time setting is completed. Short press K1,enterfunction offine-tuning settings, trigger the efault delay period is invalid, press K1, during the delay trigger active(re-timing), click on the K1, during the delay reset (timer turned off,the relay reset) press again to repeat the default settings for the first time.
?
P1-2 operating modes: A signal trigger ,digital countdown begins, X seconds after, there lay open Y seconds, then close. Users can set the relay time X,Y; P1-1different time settings similar to the blue lights that set the relay time,blue light indicates setting relay off time. Short press K1, enter function offine-tuning the set, the default trigger is invalid during the delay, pressK1, during the delay trigger active(re-timing), then click the first repeat default settings.
P1-3 operating modes: Open X seconds, disconnect Yseconds, infinite loop. Users can set the relay timeX, Y; time setting similar to P1-2. Short press K1,enter function offine-tuning set, The default function is: set up an electric circuit the relay first open, press the K1,there lay first close. Press again to repeat the default functionality.
?
P1-4 operating modes: a signal to trigger the relay open but do not start the timer,when the trigger signal disappears, digital count down begins, X time after, the relayclose; During the delay,again to the signal, digital count down canceled, stays energized, the signal disappears, restart count down; (equivalentto release the button to start timing, commonly usedin power-offdelay). Users canset the relay time X; time setting similar to P1-1.
Package Included:
1 x 24V LED Automation Delay Timer Control
1. Increase the supply anti-reversefunction.
2. The use of opto isolated input and output,enhanced anti-jamming capabilit consumption.
3. Set parameter after power for ever memories.
4. Signal terminal voltage signal can be maintained for a longtime.
5. to ensure stability,industrial grade board,class PLC.
?
Parameters:
1. Size:64.2mm*34.8mm*18.5mm.
2. Relay Specifications:AC 220V 10A or DC 30V 10A.
3. Quiescent Current:20mA,Operating Current:50mA.
4. Working voltage:10~16V (if other ranges can be customized).
5. Signal voltage:4V~20V (if other ranges can be customized).
6. life:about100,000times,Working temperature:-40~85'C.
?
Working mode selection:
After power on,long press K12 seconds later into the select function mode, P1-1~P1-4 for choose.
P1-1 operating modes:a signal to trigger relay, time is up, the relay disconnect users,You can set relay time T,click K2 the hundreddigital tube starts flashing,then press K3, the hundred digital change; click K2 ten digital tube starts flashing,then press K3,ten digit changes;click K2 bit digital tube starts flashing, then press K3, single-digit change; then click K2; digital pipe does not blink,then press the K3, shifting the decimalpoint,the decimalpointin abitindicates 0-999minutesin ten represents 0 to 99.9 seconds withou tadecimalpointrepresents 0-999 seconds; goodchoice, bringing the time setting is completed. Short press K1,enterfunction offine-tuning settings, trigger the efault delay period is invalid, press K1, during the delay trigger active(re-timing), click on the K1, during the delay reset (timer turned off,the relay reset) press again to repeat the default settings for the first time.
?
P1-2 operating modes: A signal trigger ,digital countdown begins, X seconds after, there lay open Y seconds, then close. Users can set the relay time X,Y; P1-1different time settings similar to the blue lights that set the relay time,blue light indicates setting relay off time. Short press K1, enter function offine-tuning the set, the default trigger is invalid during the delay, pressK1, during the delay trigger active(re-timing), then click the first repeat default settings.
P1-3 operating modes: Open X seconds, disconnect Yseconds, infinite loop. Users can set the relay timeX, Y; time setting similar to P1-2. Short press K1,enter function offine-tuning set, The default function is: set up an electric circuit the relay first open, press the K1,there lay first close. Press again to repeat the default functionality.
?
P1-4 operating modes: a signal to trigger the relay open but do not start the timer,when the trigger signal disappears, digital count down begins, X time after, the relayclose; During the delay,again to the signal, digital count down canceled, stays energized, the signal disappears, restart count down; (equivalentto release the button to start timing, commonly usedin power-offdelay). Users canset the relay time X; time setting similar to P1-1.
Package Included:
1 x 24V LED Automation Delay Timer Control
Other Customers also buy:
-
$14.69{"id":4518011437143,"title":"24V LED Automation Delay Timer Control Switch Relay Module with Case","handle":"24v-led-automation-delay-timer-control-switch-relay-module-with-case","description":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e1. Increase the supply anti-reversefunction.\u003cbr\u003e2. The use of opto isolated input and output,enhanced anti-jamming capabilit consumption.\u003cbr\u003e3. Set parameter after power for ever memories.\u003cbr\u003e4. Signal terminal voltage signal can be maintained for a longtime.\u003cbr\u003e5. to ensure stability,industrial grade board,class PLC.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e1. Size:64.2mm*34.8mm*18.5mm.\u003cbr\u003e2. Relay Specifications:AC 220V 10A or DC 30V 10A.\u003cbr\u003e3. Quiescent Current:20mA,Operating Current:50mA.\u003cbr\u003e4. Working voltage:10~16V (if other ranges can be customized).\u003cbr\u003e5. Signal voltage:4V~20V (if other ranges can be customized).\u003cbr\u003e6. life:about100,000times,Working temperature:-40~85'C.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eWorking mode selection:\u003c\/strong\u003e\u003cbr\u003eAfter power on,long press K12 seconds later into the select function mode, P1-1~P1-4 for choose.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-1 operating modes:\u003c\/strong\u003ea signal to trigger relay, time is up, the relay disconnect users,You can set relay time T,click K2 the hundreddigital tube starts flashing,then press K3, the hundred digital change; click K2 ten digital tube starts flashing,then press K3,ten digit changes;click K2 bit digital tube starts flashing, then press K3, single-digit change; then click K2; digital pipe does not blink,then press the K3, shifting the decimalpoint,the decimalpointin abitindicates 0-999minutesin ten represents 0 to 99.9 seconds withou tadecimalpointrepresents 0-999 seconds; goodchoice, bringing the time setting is completed. Short press K1,enterfunction offine-tuning settings, trigger the efault delay period is invalid, press K1, during the delay trigger active(re-timing), click on the K1, during the delay reset (timer turned off,the relay reset) press again to repeat the default settings for the first time.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-2 operating modes:\u003c\/strong\u003e A signal trigger ,digital countdown begins, X seconds after, there lay open Y seconds, then close. Users can set the relay time X,Y; P1-1different time settings similar to the blue lights that set the relay time,blue light indicates setting relay off time. Short press K1, enter function offine-tuning the set, the default trigger is invalid during the delay, pressK1, during the delay trigger active(re-timing), then click the first repeat default settings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-3 operating modes:\u003c\/strong\u003e Open X seconds, disconnect Yseconds, infinite loop. Users can set the relay timeX, Y; time setting similar to P1-2. Short press K1,enter function offine-tuning set, The default function is: set up an electric circuit the relay first open, press the K1,there lay first close. Press again to repeat the default functionality.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-4 operating modes:\u003c\/strong\u003e a signal to trigger the relay open but do not start the timer,when the trigger signal disappears, digital count down begins, X time after, the relayclose; During the delay,again to the signal, digital count down canceled, stays energized, the signal disappears, restart count down; (equivalentto release the button to start timing, commonly usedin power-offdelay). Users canset the relay time X; time setting similar to P1-1.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 24V LED Automation Delay Timer Control","published_at":"2020-05-20T02:36:45+08:00","created_at":"2020-05-20T02:36:46+08:00","vendor":"DIYTECH","type":"Time Delay Relay","tags":["Relay","Relays"],"price":1135,"price_min":1135,"price_max":3367,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179534200919,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT5170-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"24V LED Automation Delay Timer Control Switch Relay Module with Case - 3pcs","public_title":"3pcs","options":["3pcs"],"price":1135,"weight":135,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179534233687,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT5170-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"24V LED Automation Delay Timer Control Switch Relay Module with Case - 10pcs","public_title":"10pcs","options":["10pcs"],"price":3367,"weight":450,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800","options":["Batch"],"media":[{"alt":"24V LED Automation Delay Timer Control Switch Relay Module with Case","id":6257378099287,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e1. Increase the supply anti-reversefunction.\u003cbr\u003e2. The use of opto isolated input and output,enhanced anti-jamming capabilit consumption.\u003cbr\u003e3. Set parameter after power for ever memories.\u003cbr\u003e4. Signal terminal voltage signal can be maintained for a longtime.\u003cbr\u003e5. to ensure stability,industrial grade board,class PLC.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e1. Size:64.2mm*34.8mm*18.5mm.\u003cbr\u003e2. Relay Specifications:AC 220V 10A or DC 30V 10A.\u003cbr\u003e3. Quiescent Current:20mA,Operating Current:50mA.\u003cbr\u003e4. Working voltage:10~16V (if other ranges can be customized).\u003cbr\u003e5. Signal voltage:4V~20V (if other ranges can be customized).\u003cbr\u003e6. life:about100,000times,Working temperature:-40~85'C.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eWorking mode selection:\u003c\/strong\u003e\u003cbr\u003eAfter power on,long press K12 seconds later into the select function mode, P1-1~P1-4 for choose.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-1 operating modes:\u003c\/strong\u003ea signal to trigger relay, time is up, the relay disconnect users,You can set relay time T,click K2 the hundreddigital tube starts flashing,then press K3, the hundred digital change; click K2 ten digital tube starts flashing,then press K3,ten digit changes;click K2 bit digital tube starts flashing, then press K3, single-digit change; then click K2; digital pipe does not blink,then press the K3, shifting the decimalpoint,the decimalpointin abitindicates 0-999minutesin ten represents 0 to 99.9 seconds withou tadecimalpointrepresents 0-999 seconds; goodchoice, bringing the time setting is completed. Short press K1,enterfunction offine-tuning settings, trigger the efault delay period is invalid, press K1, during the delay trigger active(re-timing), click on the K1, during the delay reset (timer turned off,the relay reset) press again to repeat the default settings for the first time.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-2 operating modes:\u003c\/strong\u003e A signal trigger ,digital countdown begins, X seconds after, there lay open Y seconds, then close. Users can set the relay time X,Y; P1-1different time settings similar to the blue lights that set the relay time,blue light indicates setting relay off time. Short press K1, enter function offine-tuning the set, the default trigger is invalid during the delay, pressK1, during the delay trigger active(re-timing), then click the first repeat default settings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-3 operating modes:\u003c\/strong\u003e Open X seconds, disconnect Yseconds, infinite loop. Users can set the relay timeX, Y; time setting similar to P1-2. Short press K1,enter function offine-tuning set, The default function is: set up an electric circuit the relay first open, press the K1,there lay first close. Press again to repeat the default functionality.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-4 operating modes:\u003c\/strong\u003e a signal to trigger the relay open but do not start the timer,when the trigger signal disappears, digital count down begins, X time after, the relayclose; During the delay,again to the signal, digital count down canceled, stays energized, the signal disappears, restart count down; (equivalentto release the button to start timing, commonly usedin power-offdelay). Users canset the relay time X; time setting similar to P1-1.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 24V LED Automation Delay Timer Control"} -
$9.65{"id":4518011437143,"title":"24V LED Automation Delay Timer Control Switch Relay Module with Case","handle":"24v-led-automation-delay-timer-control-switch-relay-module-with-case","description":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e1. Increase the supply anti-reversefunction.\u003cbr\u003e2. The use of opto isolated input and output,enhanced anti-jamming capabilit consumption.\u003cbr\u003e3. Set parameter after power for ever memories.\u003cbr\u003e4. Signal terminal voltage signal can be maintained for a longtime.\u003cbr\u003e5. to ensure stability,industrial grade board,class PLC.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e1. Size:64.2mm*34.8mm*18.5mm.\u003cbr\u003e2. Relay Specifications:AC 220V 10A or DC 30V 10A.\u003cbr\u003e3. Quiescent Current:20mA,Operating Current:50mA.\u003cbr\u003e4. Working voltage:10~16V (if other ranges can be customized).\u003cbr\u003e5. Signal voltage:4V~20V (if other ranges can be customized).\u003cbr\u003e6. life:about100,000times,Working temperature:-40~85'C.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eWorking mode selection:\u003c\/strong\u003e\u003cbr\u003eAfter power on,long press K12 seconds later into the select function mode, P1-1~P1-4 for choose.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-1 operating modes:\u003c\/strong\u003ea signal to trigger relay, time is up, the relay disconnect users,You can set relay time T,click K2 the hundreddigital tube starts flashing,then press K3, the hundred digital change; click K2 ten digital tube starts flashing,then press K3,ten digit changes;click K2 bit digital tube starts flashing, then press K3, single-digit change; then click K2; digital pipe does not blink,then press the K3, shifting the decimalpoint,the decimalpointin abitindicates 0-999minutesin ten represents 0 to 99.9 seconds withou tadecimalpointrepresents 0-999 seconds; goodchoice, bringing the time setting is completed. Short press K1,enterfunction offine-tuning settings, trigger the efault delay period is invalid, press K1, during the delay trigger active(re-timing), click on the K1, during the delay reset (timer turned off,the relay reset) press again to repeat the default settings for the first time.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-2 operating modes:\u003c\/strong\u003e A signal trigger ,digital countdown begins, X seconds after, there lay open Y seconds, then close. Users can set the relay time X,Y; P1-1different time settings similar to the blue lights that set the relay time,blue light indicates setting relay off time. Short press K1, enter function offine-tuning the set, the default trigger is invalid during the delay, pressK1, during the delay trigger active(re-timing), then click the first repeat default settings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-3 operating modes:\u003c\/strong\u003e Open X seconds, disconnect Yseconds, infinite loop. Users can set the relay timeX, Y; time setting similar to P1-2. Short press K1,enter function offine-tuning set, The default function is: set up an electric circuit the relay first open, press the K1,there lay first close. Press again to repeat the default functionality.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-4 operating modes:\u003c\/strong\u003e a signal to trigger the relay open but do not start the timer,when the trigger signal disappears, digital count down begins, X time after, the relayclose; During the delay,again to the signal, digital count down canceled, stays energized, the signal disappears, restart count down; (equivalentto release the button to start timing, commonly usedin power-offdelay). Users canset the relay time X; time setting similar to P1-1.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 24V LED Automation Delay Timer Control","published_at":"2020-05-20T02:36:45+08:00","created_at":"2020-05-20T02:36:46+08:00","vendor":"DIYTECH","type":"Time Delay Relay","tags":["Relay","Relays"],"price":1135,"price_min":1135,"price_max":3367,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179534200919,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT5170-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"24V LED Automation Delay Timer Control Switch Relay Module with Case - 3pcs","public_title":"3pcs","options":["3pcs"],"price":1135,"weight":135,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179534233687,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT5170-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"24V LED Automation Delay Timer Control Switch Relay Module with Case - 10pcs","public_title":"10pcs","options":["10pcs"],"price":3367,"weight":450,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800","options":["Batch"],"media":[{"alt":"24V LED Automation Delay Timer Control Switch Relay Module with Case","id":6257378099287,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e1. Increase the supply anti-reversefunction.\u003cbr\u003e2. The use of opto isolated input and output,enhanced anti-jamming capabilit consumption.\u003cbr\u003e3. Set parameter after power for ever memories.\u003cbr\u003e4. Signal terminal voltage signal can be maintained for a longtime.\u003cbr\u003e5. to ensure stability,industrial grade board,class PLC.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e1. Size:64.2mm*34.8mm*18.5mm.\u003cbr\u003e2. Relay Specifications:AC 220V 10A or DC 30V 10A.\u003cbr\u003e3. Quiescent Current:20mA,Operating Current:50mA.\u003cbr\u003e4. Working voltage:10~16V (if other ranges can be customized).\u003cbr\u003e5. Signal voltage:4V~20V (if other ranges can be customized).\u003cbr\u003e6. life:about100,000times,Working temperature:-40~85'C.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eWorking mode selection:\u003c\/strong\u003e\u003cbr\u003eAfter power on,long press K12 seconds later into the select function mode, P1-1~P1-4 for choose.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-1 operating modes:\u003c\/strong\u003ea signal to trigger relay, time is up, the relay disconnect users,You can set relay time T,click K2 the hundreddigital tube starts flashing,then press K3, the hundred digital change; click K2 ten digital tube starts flashing,then press K3,ten digit changes;click K2 bit digital tube starts flashing, then press K3, single-digit change; then click K2; digital pipe does not blink,then press the K3, shifting the decimalpoint,the decimalpointin abitindicates 0-999minutesin ten represents 0 to 99.9 seconds withou tadecimalpointrepresents 0-999 seconds; goodchoice, bringing the time setting is completed. Short press K1,enterfunction offine-tuning settings, trigger the efault delay period is invalid, press K1, during the delay trigger active(re-timing), click on the K1, during the delay reset (timer turned off,the relay reset) press again to repeat the default settings for the first time.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-2 operating modes:\u003c\/strong\u003e A signal trigger ,digital countdown begins, X seconds after, there lay open Y seconds, then close. Users can set the relay time X,Y; P1-1different time settings similar to the blue lights that set the relay time,blue light indicates setting relay off time. Short press K1, enter function offine-tuning the set, the default trigger is invalid during the delay, pressK1, during the delay trigger active(re-timing), then click the first repeat default settings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-3 operating modes:\u003c\/strong\u003e Open X seconds, disconnect Yseconds, infinite loop. Users can set the relay timeX, Y; time setting similar to P1-2. Short press K1,enter function offine-tuning set, The default function is: set up an electric circuit the relay first open, press the K1,there lay first close. Press again to repeat the default functionality.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-4 operating modes:\u003c\/strong\u003e a signal to trigger the relay open but do not start the timer,when the trigger signal disappears, digital count down begins, X time after, the relayclose; During the delay,again to the signal, digital count down canceled, stays energized, the signal disappears, restart count down; (equivalentto release the button to start timing, commonly usedin power-offdelay). Users canset the relay time X; time setting similar to P1-1.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 24V LED Automation Delay Timer Control"} -
$7.21{"id":4518011437143,"title":"24V LED Automation Delay Timer Control Switch Relay Module with Case","handle":"24v-led-automation-delay-timer-control-switch-relay-module-with-case","description":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e1. Increase the supply anti-reversefunction.\u003cbr\u003e2. The use of opto isolated input and output,enhanced anti-jamming capabilit consumption.\u003cbr\u003e3. Set parameter after power for ever memories.\u003cbr\u003e4. Signal terminal voltage signal can be maintained for a longtime.\u003cbr\u003e5. to ensure stability,industrial grade board,class PLC.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e1. Size:64.2mm*34.8mm*18.5mm.\u003cbr\u003e2. Relay Specifications:AC 220V 10A or DC 30V 10A.\u003cbr\u003e3. Quiescent Current:20mA,Operating Current:50mA.\u003cbr\u003e4. Working voltage:10~16V (if other ranges can be customized).\u003cbr\u003e5. Signal voltage:4V~20V (if other ranges can be customized).\u003cbr\u003e6. life:about100,000times,Working temperature:-40~85'C.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eWorking mode selection:\u003c\/strong\u003e\u003cbr\u003eAfter power on,long press K12 seconds later into the select function mode, P1-1~P1-4 for choose.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-1 operating modes:\u003c\/strong\u003ea signal to trigger relay, time is up, the relay disconnect users,You can set relay time T,click K2 the hundreddigital tube starts flashing,then press K3, the hundred digital change; click K2 ten digital tube starts flashing,then press K3,ten digit changes;click K2 bit digital tube starts flashing, then press K3, single-digit change; then click K2; digital pipe does not blink,then press the K3, shifting the decimalpoint,the decimalpointin abitindicates 0-999minutesin ten represents 0 to 99.9 seconds withou tadecimalpointrepresents 0-999 seconds; goodchoice, bringing the time setting is completed. Short press K1,enterfunction offine-tuning settings, trigger the efault delay period is invalid, press K1, during the delay trigger active(re-timing), click on the K1, during the delay reset (timer turned off,the relay reset) press again to repeat the default settings for the first time.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-2 operating modes:\u003c\/strong\u003e A signal trigger ,digital countdown begins, X seconds after, there lay open Y seconds, then close. Users can set the relay time X,Y; P1-1different time settings similar to the blue lights that set the relay time,blue light indicates setting relay off time. Short press K1, enter function offine-tuning the set, the default trigger is invalid during the delay, pressK1, during the delay trigger active(re-timing), then click the first repeat default settings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-3 operating modes:\u003c\/strong\u003e Open X seconds, disconnect Yseconds, infinite loop. Users can set the relay timeX, Y; time setting similar to P1-2. Short press K1,enter function offine-tuning set, The default function is: set up an electric circuit the relay first open, press the K1,there lay first close. Press again to repeat the default functionality.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-4 operating modes:\u003c\/strong\u003e a signal to trigger the relay open but do not start the timer,when the trigger signal disappears, digital count down begins, X time after, the relayclose; During the delay,again to the signal, digital count down canceled, stays energized, the signal disappears, restart count down; (equivalentto release the button to start timing, commonly usedin power-offdelay). Users canset the relay time X; time setting similar to P1-1.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 24V LED Automation Delay Timer Control","published_at":"2020-05-20T02:36:45+08:00","created_at":"2020-05-20T02:36:46+08:00","vendor":"DIYTECH","type":"Time Delay Relay","tags":["Relay","Relays"],"price":1135,"price_min":1135,"price_max":3367,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179534200919,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT5170-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"24V LED Automation Delay Timer Control Switch Relay Module with Case - 3pcs","public_title":"3pcs","options":["3pcs"],"price":1135,"weight":135,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179534233687,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT5170-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"24V LED Automation Delay Timer Control Switch Relay Module with Case - 10pcs","public_title":"10pcs","options":["10pcs"],"price":3367,"weight":450,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800","options":["Batch"],"media":[{"alt":"24V LED Automation Delay Timer Control Switch Relay Module with Case","id":6257378099287,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e1. Increase the supply anti-reversefunction.\u003cbr\u003e2. The use of opto isolated input and output,enhanced anti-jamming capabilit consumption.\u003cbr\u003e3. Set parameter after power for ever memories.\u003cbr\u003e4. Signal terminal voltage signal can be maintained for a longtime.\u003cbr\u003e5. to ensure stability,industrial grade board,class PLC.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e1. Size:64.2mm*34.8mm*18.5mm.\u003cbr\u003e2. Relay Specifications:AC 220V 10A or DC 30V 10A.\u003cbr\u003e3. Quiescent Current:20mA,Operating Current:50mA.\u003cbr\u003e4. Working voltage:10~16V (if other ranges can be customized).\u003cbr\u003e5. Signal voltage:4V~20V (if other ranges can be customized).\u003cbr\u003e6. life:about100,000times,Working temperature:-40~85'C.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eWorking mode selection:\u003c\/strong\u003e\u003cbr\u003eAfter power on,long press K12 seconds later into the select function mode, P1-1~P1-4 for choose.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-1 operating modes:\u003c\/strong\u003ea signal to trigger relay, time is up, the relay disconnect users,You can set relay time T,click K2 the hundreddigital tube starts flashing,then press K3, the hundred digital change; click K2 ten digital tube starts flashing,then press K3,ten digit changes;click K2 bit digital tube starts flashing, then press K3, single-digit change; then click K2; digital pipe does not blink,then press the K3, shifting the decimalpoint,the decimalpointin abitindicates 0-999minutesin ten represents 0 to 99.9 seconds withou tadecimalpointrepresents 0-999 seconds; goodchoice, bringing the time setting is completed. Short press K1,enterfunction offine-tuning settings, trigger the efault delay period is invalid, press K1, during the delay trigger active(re-timing), click on the K1, during the delay reset (timer turned off,the relay reset) press again to repeat the default settings for the first time.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-2 operating modes:\u003c\/strong\u003e A signal trigger ,digital countdown begins, X seconds after, there lay open Y seconds, then close. Users can set the relay time X,Y; P1-1different time settings similar to the blue lights that set the relay time,blue light indicates setting relay off time. Short press K1, enter function offine-tuning the set, the default trigger is invalid during the delay, pressK1, during the delay trigger active(re-timing), then click the first repeat default settings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-3 operating modes:\u003c\/strong\u003e Open X seconds, disconnect Yseconds, infinite loop. Users can set the relay timeX, Y; time setting similar to P1-2. Short press K1,enter function offine-tuning set, The default function is: set up an electric circuit the relay first open, press the K1,there lay first close. Press again to repeat the default functionality.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-4 operating modes:\u003c\/strong\u003e a signal to trigger the relay open but do not start the timer,when the trigger signal disappears, digital count down begins, X time after, the relayclose; During the delay,again to the signal, digital count down canceled, stays energized, the signal disappears, restart count down; (equivalentto release the button to start timing, commonly usedin power-offdelay). Users canset the relay time X; time setting similar to P1-1.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 24V LED Automation Delay Timer Control"} -
$5.80{"id":4518011437143,"title":"24V LED Automation Delay Timer Control Switch Relay Module with Case","handle":"24v-led-automation-delay-timer-control-switch-relay-module-with-case","description":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e1. Increase the supply anti-reversefunction.\u003cbr\u003e2. The use of opto isolated input and output,enhanced anti-jamming capabilit consumption.\u003cbr\u003e3. Set parameter after power for ever memories.\u003cbr\u003e4. Signal terminal voltage signal can be maintained for a longtime.\u003cbr\u003e5. to ensure stability,industrial grade board,class PLC.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e1. Size:64.2mm*34.8mm*18.5mm.\u003cbr\u003e2. Relay Specifications:AC 220V 10A or DC 30V 10A.\u003cbr\u003e3. Quiescent Current:20mA,Operating Current:50mA.\u003cbr\u003e4. Working voltage:10~16V (if other ranges can be customized).\u003cbr\u003e5. Signal voltage:4V~20V (if other ranges can be customized).\u003cbr\u003e6. life:about100,000times,Working temperature:-40~85'C.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eWorking mode selection:\u003c\/strong\u003e\u003cbr\u003eAfter power on,long press K12 seconds later into the select function mode, P1-1~P1-4 for choose.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-1 operating modes:\u003c\/strong\u003ea signal to trigger relay, time is up, the relay disconnect users,You can set relay time T,click K2 the hundreddigital tube starts flashing,then press K3, the hundred digital change; click K2 ten digital tube starts flashing,then press K3,ten digit changes;click K2 bit digital tube starts flashing, then press K3, single-digit change; then click K2; digital pipe does not blink,then press the K3, shifting the decimalpoint,the decimalpointin abitindicates 0-999minutesin ten represents 0 to 99.9 seconds withou tadecimalpointrepresents 0-999 seconds; goodchoice, bringing the time setting is completed. Short press K1,enterfunction offine-tuning settings, trigger the efault delay period is invalid, press K1, during the delay trigger active(re-timing), click on the K1, during the delay reset (timer turned off,the relay reset) press again to repeat the default settings for the first time.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-2 operating modes:\u003c\/strong\u003e A signal trigger ,digital countdown begins, X seconds after, there lay open Y seconds, then close. Users can set the relay time X,Y; P1-1different time settings similar to the blue lights that set the relay time,blue light indicates setting relay off time. Short press K1, enter function offine-tuning the set, the default trigger is invalid during the delay, pressK1, during the delay trigger active(re-timing), then click the first repeat default settings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-3 operating modes:\u003c\/strong\u003e Open X seconds, disconnect Yseconds, infinite loop. Users can set the relay timeX, Y; time setting similar to P1-2. Short press K1,enter function offine-tuning set, The default function is: set up an electric circuit the relay first open, press the K1,there lay first close. Press again to repeat the default functionality.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-4 operating modes:\u003c\/strong\u003e a signal to trigger the relay open but do not start the timer,when the trigger signal disappears, digital count down begins, X time after, the relayclose; During the delay,again to the signal, digital count down canceled, stays energized, the signal disappears, restart count down; (equivalentto release the button to start timing, commonly usedin power-offdelay). Users canset the relay time X; time setting similar to P1-1.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 24V LED Automation Delay Timer Control","published_at":"2020-05-20T02:36:45+08:00","created_at":"2020-05-20T02:36:46+08:00","vendor":"DIYTECH","type":"Time Delay Relay","tags":["Relay","Relays"],"price":1135,"price_min":1135,"price_max":3367,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179534200919,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT5170-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"24V LED Automation Delay Timer Control Switch Relay Module with Case - 3pcs","public_title":"3pcs","options":["3pcs"],"price":1135,"weight":135,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179534233687,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT5170-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"24V LED Automation Delay Timer Control Switch Relay Module with Case - 10pcs","public_title":"10pcs","options":["10pcs"],"price":3367,"weight":450,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800","options":["Batch"],"media":[{"alt":"24V LED Automation Delay Timer Control Switch Relay Module with Case","id":6257378099287,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e1. Increase the supply anti-reversefunction.\u003cbr\u003e2. The use of opto isolated input and output,enhanced anti-jamming capabilit consumption.\u003cbr\u003e3. Set parameter after power for ever memories.\u003cbr\u003e4. Signal terminal voltage signal can be maintained for a longtime.\u003cbr\u003e5. to ensure stability,industrial grade board,class PLC.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e1. Size:64.2mm*34.8mm*18.5mm.\u003cbr\u003e2. Relay Specifications:AC 220V 10A or DC 30V 10A.\u003cbr\u003e3. Quiescent Current:20mA,Operating Current:50mA.\u003cbr\u003e4. Working voltage:10~16V (if other ranges can be customized).\u003cbr\u003e5. Signal voltage:4V~20V (if other ranges can be customized).\u003cbr\u003e6. life:about100,000times,Working temperature:-40~85'C.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eWorking mode selection:\u003c\/strong\u003e\u003cbr\u003eAfter power on,long press K12 seconds later into the select function mode, P1-1~P1-4 for choose.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-1 operating modes:\u003c\/strong\u003ea signal to trigger relay, time is up, the relay disconnect users,You can set relay time T,click K2 the hundreddigital tube starts flashing,then press K3, the hundred digital change; click K2 ten digital tube starts flashing,then press K3,ten digit changes;click K2 bit digital tube starts flashing, then press K3, single-digit change; then click K2; digital pipe does not blink,then press the K3, shifting the decimalpoint,the decimalpointin abitindicates 0-999minutesin ten represents 0 to 99.9 seconds withou tadecimalpointrepresents 0-999 seconds; goodchoice, bringing the time setting is completed. Short press K1,enterfunction offine-tuning settings, trigger the efault delay period is invalid, press K1, during the delay trigger active(re-timing), click on the K1, during the delay reset (timer turned off,the relay reset) press again to repeat the default settings for the first time.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-2 operating modes:\u003c\/strong\u003e A signal trigger ,digital countdown begins, X seconds after, there lay open Y seconds, then close. Users can set the relay time X,Y; P1-1different time settings similar to the blue lights that set the relay time,blue light indicates setting relay off time. Short press K1, enter function offine-tuning the set, the default trigger is invalid during the delay, pressK1, during the delay trigger active(re-timing), then click the first repeat default settings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-3 operating modes:\u003c\/strong\u003e Open X seconds, disconnect Yseconds, infinite loop. Users can set the relay timeX, Y; time setting similar to P1-2. Short press K1,enter function offine-tuning set, The default function is: set up an electric circuit the relay first open, press the K1,there lay first close. Press again to repeat the default functionality.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-4 operating modes:\u003c\/strong\u003e a signal to trigger the relay open but do not start the timer,when the trigger signal disappears, digital count down begins, X time after, the relayclose; During the delay,again to the signal, digital count down canceled, stays energized, the signal disappears, restart count down; (equivalentto release the button to start timing, commonly usedin power-offdelay). Users canset the relay time X; time setting similar to P1-1.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 24V LED Automation Delay Timer Control"} -
$3.80{"id":4518011437143,"title":"24V LED Automation Delay Timer Control Switch Relay Module with Case","handle":"24v-led-automation-delay-timer-control-switch-relay-module-with-case","description":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e1. Increase the supply anti-reversefunction.\u003cbr\u003e2. The use of opto isolated input and output,enhanced anti-jamming capabilit consumption.\u003cbr\u003e3. Set parameter after power for ever memories.\u003cbr\u003e4. Signal terminal voltage signal can be maintained for a longtime.\u003cbr\u003e5. to ensure stability,industrial grade board,class PLC.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e1. Size:64.2mm*34.8mm*18.5mm.\u003cbr\u003e2. Relay Specifications:AC 220V 10A or DC 30V 10A.\u003cbr\u003e3. Quiescent Current:20mA,Operating Current:50mA.\u003cbr\u003e4. Working voltage:10~16V (if other ranges can be customized).\u003cbr\u003e5. Signal voltage:4V~20V (if other ranges can be customized).\u003cbr\u003e6. life:about100,000times,Working temperature:-40~85'C.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eWorking mode selection:\u003c\/strong\u003e\u003cbr\u003eAfter power on,long press K12 seconds later into the select function mode, P1-1~P1-4 for choose.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-1 operating modes:\u003c\/strong\u003ea signal to trigger relay, time is up, the relay disconnect users,You can set relay time T,click K2 the hundreddigital tube starts flashing,then press K3, the hundred digital change; click K2 ten digital tube starts flashing,then press K3,ten digit changes;click K2 bit digital tube starts flashing, then press K3, single-digit change; then click K2; digital pipe does not blink,then press the K3, shifting the decimalpoint,the decimalpointin abitindicates 0-999minutesin ten represents 0 to 99.9 seconds withou tadecimalpointrepresents 0-999 seconds; goodchoice, bringing the time setting is completed. Short press K1,enterfunction offine-tuning settings, trigger the efault delay period is invalid, press K1, during the delay trigger active(re-timing), click on the K1, during the delay reset (timer turned off,the relay reset) press again to repeat the default settings for the first time.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-2 operating modes:\u003c\/strong\u003e A signal trigger ,digital countdown begins, X seconds after, there lay open Y seconds, then close. Users can set the relay time X,Y; P1-1different time settings similar to the blue lights that set the relay time,blue light indicates setting relay off time. Short press K1, enter function offine-tuning the set, the default trigger is invalid during the delay, pressK1, during the delay trigger active(re-timing), then click the first repeat default settings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-3 operating modes:\u003c\/strong\u003e Open X seconds, disconnect Yseconds, infinite loop. Users can set the relay timeX, Y; time setting similar to P1-2. Short press K1,enter function offine-tuning set, The default function is: set up an electric circuit the relay first open, press the K1,there lay first close. Press again to repeat the default functionality.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-4 operating modes:\u003c\/strong\u003e a signal to trigger the relay open but do not start the timer,when the trigger signal disappears, digital count down begins, X time after, the relayclose; During the delay,again to the signal, digital count down canceled, stays energized, the signal disappears, restart count down; (equivalentto release the button to start timing, commonly usedin power-offdelay). Users canset the relay time X; time setting similar to P1-1.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 24V LED Automation Delay Timer Control","published_at":"2020-05-20T02:36:45+08:00","created_at":"2020-05-20T02:36:46+08:00","vendor":"DIYTECH","type":"Time Delay Relay","tags":["Relay","Relays"],"price":1135,"price_min":1135,"price_max":3367,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179534200919,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT5170-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"24V LED Automation Delay Timer Control Switch Relay Module with Case - 3pcs","public_title":"3pcs","options":["3pcs"],"price":1135,"weight":135,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179534233687,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT5170-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"24V LED Automation Delay Timer Control Switch Relay Module with Case - 10pcs","public_title":"10pcs","options":["10pcs"],"price":3367,"weight":450,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800","options":["Batch"],"media":[{"alt":"24V LED Automation Delay Timer Control Switch Relay Module with Case","id":6257378099287,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e1. Increase the supply anti-reversefunction.\u003cbr\u003e2. The use of opto isolated input and output,enhanced anti-jamming capabilit consumption.\u003cbr\u003e3. Set parameter after power for ever memories.\u003cbr\u003e4. Signal terminal voltage signal can be maintained for a longtime.\u003cbr\u003e5. to ensure stability,industrial grade board,class PLC.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e1. Size:64.2mm*34.8mm*18.5mm.\u003cbr\u003e2. Relay Specifications:AC 220V 10A or DC 30V 10A.\u003cbr\u003e3. Quiescent Current:20mA,Operating Current:50mA.\u003cbr\u003e4. Working voltage:10~16V (if other ranges can be customized).\u003cbr\u003e5. Signal voltage:4V~20V (if other ranges can be customized).\u003cbr\u003e6. life:about100,000times,Working temperature:-40~85'C.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eWorking mode selection:\u003c\/strong\u003e\u003cbr\u003eAfter power on,long press K12 seconds later into the select function mode, P1-1~P1-4 for choose.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-1 operating modes:\u003c\/strong\u003ea signal to trigger relay, time is up, the relay disconnect users,You can set relay time T,click K2 the hundreddigital tube starts flashing,then press K3, the hundred digital change; click K2 ten digital tube starts flashing,then press K3,ten digit changes;click K2 bit digital tube starts flashing, then press K3, single-digit change; then click K2; digital pipe does not blink,then press the K3, shifting the decimalpoint,the decimalpointin abitindicates 0-999minutesin ten represents 0 to 99.9 seconds withou tadecimalpointrepresents 0-999 seconds; goodchoice, bringing the time setting is completed. Short press K1,enterfunction offine-tuning settings, trigger the efault delay period is invalid, press K1, during the delay trigger active(re-timing), click on the K1, during the delay reset (timer turned off,the relay reset) press again to repeat the default settings for the first time.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-2 operating modes:\u003c\/strong\u003e A signal trigger ,digital countdown begins, X seconds after, there lay open Y seconds, then close. Users can set the relay time X,Y; P1-1different time settings similar to the blue lights that set the relay time,blue light indicates setting relay off time. Short press K1, enter function offine-tuning the set, the default trigger is invalid during the delay, pressK1, during the delay trigger active(re-timing), then click the first repeat default settings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-3 operating modes:\u003c\/strong\u003e Open X seconds, disconnect Yseconds, infinite loop. Users can set the relay timeX, Y; time setting similar to P1-2. Short press K1,enter function offine-tuning set, The default function is: set up an electric circuit the relay first open, press the K1,there lay first close. Press again to repeat the default functionality.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-4 operating modes:\u003c\/strong\u003e a signal to trigger the relay open but do not start the timer,when the trigger signal disappears, digital count down begins, X time after, the relayclose; During the delay,again to the signal, digital count down canceled, stays energized, the signal disappears, restart count down; (equivalentto release the button to start timing, commonly usedin power-offdelay). Users canset the relay time X; time setting similar to P1-1.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 24V LED Automation Delay Timer Control"} -
$2.89{"id":4518011437143,"title":"24V LED Automation Delay Timer Control Switch Relay Module with Case","handle":"24v-led-automation-delay-timer-control-switch-relay-module-with-case","description":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e1. Increase the supply anti-reversefunction.\u003cbr\u003e2. The use of opto isolated input and output,enhanced anti-jamming capabilit consumption.\u003cbr\u003e3. Set parameter after power for ever memories.\u003cbr\u003e4. Signal terminal voltage signal can be maintained for a longtime.\u003cbr\u003e5. to ensure stability,industrial grade board,class PLC.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e1. Size:64.2mm*34.8mm*18.5mm.\u003cbr\u003e2. Relay Specifications:AC 220V 10A or DC 30V 10A.\u003cbr\u003e3. Quiescent Current:20mA,Operating Current:50mA.\u003cbr\u003e4. Working voltage:10~16V (if other ranges can be customized).\u003cbr\u003e5. Signal voltage:4V~20V (if other ranges can be customized).\u003cbr\u003e6. life:about100,000times,Working temperature:-40~85'C.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eWorking mode selection:\u003c\/strong\u003e\u003cbr\u003eAfter power on,long press K12 seconds later into the select function mode, P1-1~P1-4 for choose.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-1 operating modes:\u003c\/strong\u003ea signal to trigger relay, time is up, the relay disconnect users,You can set relay time T,click K2 the hundreddigital tube starts flashing,then press K3, the hundred digital change; click K2 ten digital tube starts flashing,then press K3,ten digit changes;click K2 bit digital tube starts flashing, then press K3, single-digit change; then click K2; digital pipe does not blink,then press the K3, shifting the decimalpoint,the decimalpointin abitindicates 0-999minutesin ten represents 0 to 99.9 seconds withou tadecimalpointrepresents 0-999 seconds; goodchoice, bringing the time setting is completed. Short press K1,enterfunction offine-tuning settings, trigger the efault delay period is invalid, press K1, during the delay trigger active(re-timing), click on the K1, during the delay reset (timer turned off,the relay reset) press again to repeat the default settings for the first time.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-2 operating modes:\u003c\/strong\u003e A signal trigger ,digital countdown begins, X seconds after, there lay open Y seconds, then close. Users can set the relay time X,Y; P1-1different time settings similar to the blue lights that set the relay time,blue light indicates setting relay off time. Short press K1, enter function offine-tuning the set, the default trigger is invalid during the delay, pressK1, during the delay trigger active(re-timing), then click the first repeat default settings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-3 operating modes:\u003c\/strong\u003e Open X seconds, disconnect Yseconds, infinite loop. Users can set the relay timeX, Y; time setting similar to P1-2. Short press K1,enter function offine-tuning set, The default function is: set up an electric circuit the relay first open, press the K1,there lay first close. Press again to repeat the default functionality.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-4 operating modes:\u003c\/strong\u003e a signal to trigger the relay open but do not start the timer,when the trigger signal disappears, digital count down begins, X time after, the relayclose; During the delay,again to the signal, digital count down canceled, stays energized, the signal disappears, restart count down; (equivalentto release the button to start timing, commonly usedin power-offdelay). Users canset the relay time X; time setting similar to P1-1.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 24V LED Automation Delay Timer Control","published_at":"2020-05-20T02:36:45+08:00","created_at":"2020-05-20T02:36:46+08:00","vendor":"DIYTECH","type":"Time Delay Relay","tags":["Relay","Relays"],"price":1135,"price_min":1135,"price_max":3367,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32179534200919,"title":"3pcs","option1":"3pcs","option2":null,"option3":null,"sku":"DT5170-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"24V LED Automation Delay Timer Control Switch Relay Module with Case - 3pcs","public_title":"3pcs","options":["3pcs"],"price":1135,"weight":135,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32179534233687,"title":"10pcs","option1":"10pcs","option2":null,"option3":null,"sku":"DT5170-10","requires_shipping":false,"taxable":false,"featured_image":null,"available":true,"name":"24V LED Automation Delay Timer Control Switch Relay Module with Case - 10pcs","public_title":"10pcs","options":["10pcs"],"price":3367,"weight":450,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800","options":["Batch"],"media":[{"alt":"24V LED Automation Delay Timer Control Switch Relay Module with Case","id":6257378099287,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/1543629654_T07EC.jpg?v=1592419800","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription£º\u003c\/strong\u003e\u003cbr\u003e1. Increase the supply anti-reversefunction.\u003cbr\u003e2. The use of opto isolated input and output,enhanced anti-jamming capabilit consumption.\u003cbr\u003e3. Set parameter after power for ever memories.\u003cbr\u003e4. Signal terminal voltage signal can be maintained for a longtime.\u003cbr\u003e5. to ensure stability,industrial grade board,class PLC.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e1. Size:64.2mm*34.8mm*18.5mm.\u003cbr\u003e2. Relay Specifications:AC 220V 10A or DC 30V 10A.\u003cbr\u003e3. Quiescent Current:20mA,Operating Current:50mA.\u003cbr\u003e4. Working voltage:10~16V (if other ranges can be customized).\u003cbr\u003e5. Signal voltage:4V~20V (if other ranges can be customized).\u003cbr\u003e6. life:about100,000times,Working temperature:-40~85'C.\u003cbr\u003e\u003cstrong\u003e?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eWorking mode selection:\u003c\/strong\u003e\u003cbr\u003eAfter power on,long press K12 seconds later into the select function mode, P1-1~P1-4 for choose.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-1 operating modes:\u003c\/strong\u003ea signal to trigger relay, time is up, the relay disconnect users,You can set relay time T,click K2 the hundreddigital tube starts flashing,then press K3, the hundred digital change; click K2 ten digital tube starts flashing,then press K3,ten digit changes;click K2 bit digital tube starts flashing, then press K3, single-digit change; then click K2; digital pipe does not blink,then press the K3, shifting the decimalpoint,the decimalpointin abitindicates 0-999minutesin ten represents 0 to 99.9 seconds withou tadecimalpointrepresents 0-999 seconds; goodchoice, bringing the time setting is completed. Short press K1,enterfunction offine-tuning settings, trigger the efault delay period is invalid, press K1, during the delay trigger active(re-timing), click on the K1, during the delay reset (timer turned off,the relay reset) press again to repeat the default settings for the first time.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-2 operating modes:\u003c\/strong\u003e A signal trigger ,digital countdown begins, X seconds after, there lay open Y seconds, then close. Users can set the relay time X,Y; P1-1different time settings similar to the blue lights that set the relay time,blue light indicates setting relay off time. Short press K1, enter function offine-tuning the set, the default trigger is invalid during the delay, pressK1, during the delay trigger active(re-timing), then click the first repeat default settings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eP1-3 operating modes:\u003c\/strong\u003e Open X seconds, disconnect Yseconds, infinite loop. Users can set the relay timeX, Y; time setting similar to P1-2. Short press K1,enter function offine-tuning set, The default function is: set up an electric circuit the relay first open, press the K1,there lay first close. Press again to repeat the default functionality.\u003cbr\u003e?\u003cbr\u003e\u003cstrong\u003eP1-4 operating modes:\u003c\/strong\u003e a signal to trigger the relay open but do not start the timer,when the trigger signal disappears, digital count down begins, X time after, the relayclose; During the delay,again to the signal, digital count down canceled, stays energized, the signal disappears, restart count down; (equivalentto release the button to start timing, commonly usedin power-offdelay). Users canset the relay time X; time setting similar to P1-1.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 24V LED Automation Delay Timer Control"}
