1.2-32V 5A Constant Voltage Current LCD Digital Voltage Current Display Adjustable Buck Step Down Power Supply Module With Case
1.2-32V 5A Constant Voltage Current LCD Digital Voltage Current Display Adjustable Buck Step Down Power Supply Module With Case
brand: DIYTECH SKU:DT2242
Regular price
$4.74
![]()
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancyservice@diytech.cc
Description:
ZK-J5X is a DC adjustable constant voltage constant current step down power supply module with LCD display.HD display input voltage and output voltage, current, power and display status.Adjustable stable output voltage and current.Set output current to meet the demand.It can be used as ordinary buck power supply module, charger and LED constant current driver.Simple and efficient, practical.
Features:
High voltage resistant terminal;
With high quality acrylic shell;
Support complete disability output;
Support anti-reverse protection;
Support short circuit protection;
Support enable output;
LCD screen HD display;
Support charging function;
Support select output;
Support display input voltage;
Support display output voltage, current, power;
Support working status indicator;
Multiple parameters are displayed simultaneous;
High current, low heat;
Parameters:
Product Name: 5A Step Down Power Supply Module
Working Voltage:DC 6.5V-36V
Output Voltage:DC 1.2V-32V
Output Current:5A(4.5A need heat sink;3.5A is stable for long time)
Output Power:75W(75W need heat sink;50W is for 3.5A)
Voltage Display Range:1.2~32V
Voltage Display Precision:+/-0.1V
Voltage Display Resolution:0.05V
Current Display Range:0~5A
Current Display Precision:+/-0.05A
Voltage Display Resolution:0.005A
Conversion efficiency:About 94%
Working current:30mA
Soft Starter:Yes(Failure at high power load)
Anti-reverse Protection:Yes
Anti-backflow Protection:No(It is recommended to connect a diode in series at the ‘OUT+')
Working Temperature range:-20°~85°
Working Humidity range:0%-95%RH
Size with shell:70.5*48.4*30mm
Heat Sink Size:20*14*6mm
4.Button/Potentiometer/LED introduction:
1>.Long press means need keep press for more than 3second.
2>.ON/OFF:Short Press to select whether output voltage.Long press is used to restore default settings for next re-power.
3>.IN/OUT:Short Press to switch display input voltage or output voltage.Long press is used to switch display output current or output power.
4>.'+' Button:It is used to regulate output voltage.Increase output voltage.Each time the button is pressed for short press,the output voltage is increased by 0.05V.Long press can continuously increase.Increase 0.1V, 1V in continuous if keep long press again.
5>.' - ' Button:It is used to regulate output voltage.Decrease output voltage.Each time the button is pressed for short press,the output voltage is decreased by 0.05V.Long press can continuously decrease.Decrease 0.1V, 1V in continuous if keep long press again.
6>.ADJ-I Potentiometer:Adjust output current.Increase the output current when rotating clockwise.Module enters constant current output state if load current reach the Set Current Value.Constant current Red LED indicator CC will turn ON.
7>.ON LED:Green LED.Output indicator.It will turn ON when there is a output at output terminal.Otherwise it is OFF.
8>.CC LED:Red LED.Constant current output indicator.It enters the constant current state when the load current reaches the set current and CC constant current indicator turns ON.
9>.FULL LED:Green LED.Charged fully indicator.When battery is charged fully.It will turn ON.It will turn ON if output current is less than 0.2A when the Set Current is 2A.
10>.CHAR LED:Charging indicator.It will turn ON when charging.
5.Using Steps:
1>.As a ordinary step down power module:
1.1>.Connect right input voltage at input terminal;
1.2>.Adjust '+' and ' - ' constant voltage buttons to set output voltage according to require.
1.3>.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.
1.4>.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)
1.5>.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require overcurrent protection value.
1.6>.Test and using(E.g:Module's maximum output current is 2A if display 2A on multimeter.Then the maximum current can only be 2A when use this module.Red LED indicator will turn on if output reach to 2A.Otherwise LED is OFF.)
1.7>.The output voltage will decrease due to the current sampling resistor at the output. The higher the current, the more the voltage is reduced.
2>.As a charger:
2.1>.Tops:Power module can not be used as charger module if it does not support constant current function.The voltage difference between the battery with insufficient voltage and the charger is very large.That causes excessive charging current even damage the battery.So it needs keep charging in constant current mode to reaching a certain level.Then automatically switch back to constant voltage charging.
2.2>.Make sure floating charge voltage and charge current for battery.If the lithium battery's parameter is 3.7V/2200mAh, then the float charge voltage is 4.2V, and the maximum charging current is 1C, which is 2200mA.
2.3>.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).
2.4>.Test output voltage by multimeter and adjust '+' and ' - ' constant voltage buttons to make sure output voltage reach to require floating charge voltage.(If charge a 3.7V lithium battery, adjust the output voltage to 4.2V)
2.5>.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.
2.6>.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)
2.7>.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require charge current value.
2.8>.Connect battery at output terminal and start to charging.
3>.As a high power LED constant current driver:
3.1>.Make sure LED's working current and maximum working voltage.
3.2>.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).
3.3>.Test output voltage by multimeter at output terminal and adjust '+' and ' - ' buttons to set output voltage to LED's maximum working voltage.
3.4>.Rotate ADJ-I potentiometer counterclockwise more than 10 turns.
3.5>.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)
3.6>.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require LED working current.
3.7>.Connect LED and test.
6.Note:
1.Default output voltage is about 5V.
2.It is a step down power supply module,So the output voltage must be lower than input voltage.Otherwise it will not working normally.
3.Please press button ' - ' repeatedly if there is no output voltage.
4.It is a DC power module,So it can not connect to AC power.
5.Please don't short output.
6.Input voltage must be 0.5V higher than output voltage.
7.Please connect input before connect battery when use as charge and make sure output voltage is higher than battery voltage.It is recommended to serial a anti-backflow diode at input positive terminal.
8.'IN-' and ‘OUT-' can not be connect together,otherwise module can not support constant current output.
9.Please make sure input power is more than load power.
10.Please step down output power if module is hot.
11.The module's output voltage and current accuracy are 0.1V and 0.05A.
12.Please read use manual and description before use.
7.Application:
1.Ordinary power supply;
2.Battery charger;
3.LED drive power;
4.Instrument voltage display;
5.Test meter;
6.Circuit test;
7.Power conversion.
Package Included:
1PC*DC-DC 5A CNC Step-down Module
1PC*Shell
Other Customers also buy:
-
Translation missing: en.products.product.regular_price $14.69{"id":4521876848727,"title":"1.2-32V 5A Constant Voltage Current LCD Digital Voltage Current Display Adjustable Buck Step Down Power Supply Module With Case","handle":"1-2-32v-5a-constant-voltage-current-lcd-digital-voltage-current-display-adjustable-buck-step-down-power-supply-module-with-case","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eZK-J5X is a DC adjustable constant voltage constant current step down power supply module with LCD display.HD display input voltage and output voltage, current, power and display status.Adjustable stable output voltage and current.Set output current to meet the demand.It can be used as ordinary buck power supply module, charger and LED constant current driver.Simple and efficient, practical.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eHigh voltage resistant terminal;\u003cbr\u003eWith high quality acrylic shell;\u003cbr\u003eSupport complete disability output;\u003cbr\u003eSupport anti-reverse protection;\u003cbr\u003eSupport short circuit protection;\u003cbr\u003eSupport enable output;\u003cbr\u003eLCD screen HD display;\u003cbr\u003eSupport charging function;\u003cbr\u003eSupport select output;\u003cbr\u003eSupport display input voltage;\u003cbr\u003eSupport display output voltage, current, power;\u003cbr\u003eSupport working status indicator;\u003cbr\u003eMultiple parameters are displayed simultaneous;\u003cbr\u003eHigh current, low heat;\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eProduct Name: 5A Step Down Power Supply Module\u003cbr\u003e\u003cbr\u003eWorking Voltage:DC 6.5V-36V\u003cbr\u003eOutput Voltage:DC 1.2V-32V\u003cbr\u003eOutput Current:5A(4.5A need heat sink;3.5A is stable for long time)\u003cbr\u003eOutput Power:75W(75W need heat sink;50W is for 3.5A)\u003cbr\u003eVoltage Display Range:1.2~32V\u003cbr\u003eVoltage Display Precision:+\/-0.1V\u003cbr\u003eVoltage Display Resolution:0.05V\u003cbr\u003eCurrent Display Range:0~5A\u003cbr\u003eCurrent Display Precision:+\/-0.05A\u003cbr\u003eVoltage Display Resolution:0.005A\u003cbr\u003eConversion efficiency:About 94%\u003cbr\u003eWorking current:30mA\u003cbr\u003eSoft Starter:Yes(Failure at high power load)\u003cbr\u003eAnti-reverse Protection:Yes\u003cbr\u003eAnti-backflow Protection:No(It is recommended to connect a diode in series at the ‘OUT+')\u003cbr\u003eWorking Temperature range:-20°~85°\u003cbr\u003eWorking Humidity range:0%-95%RH\u003cbr\u003eSize with shell:70.5*48.4*30mm\u003cbr\u003eHeat Sink Size:20*14*6mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4.Button\/Potentiometer\/LED introduction:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1\u0026gt;.Long press means need keep press for more than 3second.\u003cbr\u003e2\u0026gt;.ON\/OFF:Short Press to select whether output voltage.Long press is used to restore default settings for next re-power.\u003cbr\u003e3\u0026gt;.IN\/OUT:Short Press to switch display input voltage or output voltage.Long press is used to switch display output current or output power.\u003cbr\u003e4\u0026gt;.'+' Button:It is used to regulate output voltage.Increase output voltage.Each time the button is pressed for short press,the output voltage is increased by 0.05V.Long press can continuously increase.Increase 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e5\u0026gt;.' - ' Button:It is used to regulate output voltage.Decrease output voltage.Each time the button is pressed for short press,the output voltage is decreased by 0.05V.Long press can continuously decrease.Decrease 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e6\u0026gt;.ADJ-I Potentiometer:Adjust output current.Increase the output current when rotating clockwise.Module enters constant current output state if load current reach the Set Current Value.Constant current Red LED indicator CC will turn ON.\u003cbr\u003e7\u0026gt;.ON LED:Green LED.Output indicator.It will turn ON when there is a output at output terminal.Otherwise it is OFF.\u003cbr\u003e8\u0026gt;.CC LED:Red LED.Constant current output indicator.It enters the constant current state when the load current reaches the set current and CC constant current indicator turns ON.\u003cbr\u003e9\u0026gt;.FULL LED:Green LED.Charged fully indicator.When battery is charged fully.It will turn ON.It will turn ON if output current is less than 0.2A when the Set Current is 2A.\u003cbr\u003e10\u0026gt;.CHAR LED:Charging indicator.It will turn ON when charging.\u003cbr\u003e\u003cbr\u003e5.Using Steps:\u003cbr\u003e\u003cbr\u003e1\u0026gt;.As a ordinary step down power module:\u003cbr\u003e1.1\u0026gt;.Connect right input voltage at input terminal;\u003cbr\u003e1.2\u0026gt;.Adjust '+' and ' - ' constant voltage buttons to set output voltage according to require.\u003cbr\u003e1.3\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e1.4\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e1.5\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require overcurrent protection value.\u003cbr\u003e1.6\u0026gt;.Test and using(E.g:Module's maximum output current is 2A if display 2A on multimeter.Then the maximum current can only be 2A when use this module.Red LED indicator will turn on if output reach to 2A.Otherwise LED is OFF.)\u003cbr\u003e1.7\u0026gt;.The output voltage will decrease due to the current sampling resistor at the output. The higher the current, the more the voltage is reduced.\u003cbr\u003e2\u0026gt;.As a charger:\u003cbr\u003e2.1\u0026gt;.Tops:Power module can not be used as charger module if it does not support constant current function.The voltage difference between the battery with insufficient voltage and the charger is very large.That causes excessive charging current even damage the battery.So it needs keep charging in constant current mode to reaching a certain level.Then automatically switch back to constant voltage charging.\u003cbr\u003e2.2\u0026gt;.Make sure floating charge voltage and charge current for battery.If the lithium battery's parameter is 3.7V\/2200mAh, then the float charge voltage is 4.2V, and the maximum charging current is 1C, which is 2200mA.\u003cbr\u003e2.3\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e2.4\u0026gt;.Test output voltage by multimeter and adjust '+' and ' - ' constant voltage buttons to make sure output voltage reach to require floating charge voltage.(If charge a 3.7V lithium battery, adjust the output voltage to 4.2V)\u003cbr\u003e2.5\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e2.6\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e2.7\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require charge current value.\u003cbr\u003e2.8\u0026gt;.Connect battery at output terminal and start to charging.\u003cbr\u003e3\u0026gt;.As a high power LED constant current driver:\u003cbr\u003e3.1\u0026gt;.Make sure LED's working current and maximum working voltage.\u003cbr\u003e3.2\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e3.3\u0026gt;.Test output voltage by multimeter at output terminal and adjust '+' and ' - ' buttons to set output voltage to LED's maximum working voltage.\u003cbr\u003e3.4\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns.\u003cbr\u003e3.5\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e3.6\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require LED working current.\u003cbr\u003e3.7\u0026gt;.Connect LED and test.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6.Note:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Default output voltage is about 5V.\u003cbr\u003e2.It is a step down power supply module,So the output voltage must be lower than input voltage.Otherwise it will not working normally.\u003cbr\u003e3.Please press button ' - ' repeatedly if there is no output voltage.\u003cbr\u003e4.It is a DC power module,So it can not connect to AC power.\u003cbr\u003e5.Please don't short output.\u003cbr\u003e6.Input voltage must be 0.5V higher than output voltage.\u003cbr\u003e7.Please connect input before connect battery when use as charge and make sure output voltage is higher than battery voltage.It is recommended to serial a anti-backflow diode at input positive terminal.\u003cbr\u003e8.'IN-' and ‘OUT-' can not be connect together,otherwise module can not support constant current output.\u003cbr\u003e9.Please make sure input power is more than load power.\u003cbr\u003e10.Please step down output power if module is hot.\u003cbr\u003e11.The module's output voltage and current accuracy are 0.1V and 0.05A.\u003cbr\u003e12.Please read use manual and description before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7.Application:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Ordinary power supply;\u003cbr\u003e2.Battery charger;\u003cbr\u003e3.LED drive power;\u003cbr\u003e4.Instrument voltage display;\u003cbr\u003e5.Test meter;\u003cbr\u003e6.Circuit test;\u003cbr\u003e7.Power conversion.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1PC*DC-DC 5A CNC Step-down Module\u003cbr\u003e1PC*Shell\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H5ad2b60612bb478489a268788acb26e6M.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Hd124e1a6e1ec438387078541012b2a6er.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Ha5780c34dbf1414096b513d49ee81157Y.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/He5228a9f264442fe929fec6bb8a64185W.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H4ec195ebf02c4fa7ae252d6f2a642a51A.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H06bd932f2f8f4ca3854afc9b63768f7dJ.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H19a95ffb00b24b7887439209f2cecd0cj.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H13717b2c8e514f39bfb0728a92c6b03fl.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1yMJBXQ9E3KVjSZFGq6A19XXaz.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fnNzXL1H3KVjSZFHq6zKppXaf.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1kTJAXUGF3KVjSZFvq6z_nXXaQ.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H1b1ce425060940c580c345ab16725a4ez.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-05-22T21:43:35+08:00","created_at":"2020-05-22T21:43:38+08:00","vendor":"DIYTECH","type":"Step Up\/Down Module","tags":["Display"],"price":474,"price_min":474,"price_max":474,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32030545117271,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DT2242","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"1.2-32V 5A Constant Voltage Current LCD Digital Voltage Current Display Adjustable Buck Step Down Power Supply Module With Case","public_title":null,"options":["Default Title"],"price":474,"weight":66,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_LYRik.jpg?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_m8KkK.jpg?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_Fnc78.jpg?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162829_666vZ.jpg?v=1590489807"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807","options":["Title"],"media":[{"alt":null,"id":6299818164311,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807","width":800},{"alt":null,"id":6299819507799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_LYRik.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_LYRik.jpg?v=1590489807","width":1000},{"alt":null,"id":6299821572183,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_m8KkK.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_m8KkK.jpg?v=1590489807","width":1000},{"alt":null,"id":6299821867095,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_Fnc78.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_Fnc78.jpg?v=1590489807","width":1000},{"alt":"1.2-32V 5A Constant Voltage Current Lcd Digital Display Adjustable Buck Step Down Power Supply","id":6276753293399,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162829_666vZ.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162829_666vZ.jpg?v=1590489807","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eZK-J5X is a DC adjustable constant voltage constant current step down power supply module with LCD display.HD display input voltage and output voltage, current, power and display status.Adjustable stable output voltage and current.Set output current to meet the demand.It can be used as ordinary buck power supply module, charger and LED constant current driver.Simple and efficient, practical.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eHigh voltage resistant terminal;\u003cbr\u003eWith high quality acrylic shell;\u003cbr\u003eSupport complete disability output;\u003cbr\u003eSupport anti-reverse protection;\u003cbr\u003eSupport short circuit protection;\u003cbr\u003eSupport enable output;\u003cbr\u003eLCD screen HD display;\u003cbr\u003eSupport charging function;\u003cbr\u003eSupport select output;\u003cbr\u003eSupport display input voltage;\u003cbr\u003eSupport display output voltage, current, power;\u003cbr\u003eSupport working status indicator;\u003cbr\u003eMultiple parameters are displayed simultaneous;\u003cbr\u003eHigh current, low heat;\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eProduct Name: 5A Step Down Power Supply Module\u003cbr\u003e\u003cbr\u003eWorking Voltage:DC 6.5V-36V\u003cbr\u003eOutput Voltage:DC 1.2V-32V\u003cbr\u003eOutput Current:5A(4.5A need heat sink;3.5A is stable for long time)\u003cbr\u003eOutput Power:75W(75W need heat sink;50W is for 3.5A)\u003cbr\u003eVoltage Display Range:1.2~32V\u003cbr\u003eVoltage Display Precision:+\/-0.1V\u003cbr\u003eVoltage Display Resolution:0.05V\u003cbr\u003eCurrent Display Range:0~5A\u003cbr\u003eCurrent Display Precision:+\/-0.05A\u003cbr\u003eVoltage Display Resolution:0.005A\u003cbr\u003eConversion efficiency:About 94%\u003cbr\u003eWorking current:30mA\u003cbr\u003eSoft Starter:Yes(Failure at high power load)\u003cbr\u003eAnti-reverse Protection:Yes\u003cbr\u003eAnti-backflow Protection:No(It is recommended to connect a diode in series at the ‘OUT+')\u003cbr\u003eWorking Temperature range:-20°~85°\u003cbr\u003eWorking Humidity range:0%-95%RH\u003cbr\u003eSize with shell:70.5*48.4*30mm\u003cbr\u003eHeat Sink Size:20*14*6mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4.Button\/Potentiometer\/LED introduction:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1\u0026gt;.Long press means need keep press for more than 3second.\u003cbr\u003e2\u0026gt;.ON\/OFF:Short Press to select whether output voltage.Long press is used to restore default settings for next re-power.\u003cbr\u003e3\u0026gt;.IN\/OUT:Short Press to switch display input voltage or output voltage.Long press is used to switch display output current or output power.\u003cbr\u003e4\u0026gt;.'+' Button:It is used to regulate output voltage.Increase output voltage.Each time the button is pressed for short press,the output voltage is increased by 0.05V.Long press can continuously increase.Increase 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e5\u0026gt;.' - ' Button:It is used to regulate output voltage.Decrease output voltage.Each time the button is pressed for short press,the output voltage is decreased by 0.05V.Long press can continuously decrease.Decrease 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e6\u0026gt;.ADJ-I Potentiometer:Adjust output current.Increase the output current when rotating clockwise.Module enters constant current output state if load current reach the Set Current Value.Constant current Red LED indicator CC will turn ON.\u003cbr\u003e7\u0026gt;.ON LED:Green LED.Output indicator.It will turn ON when there is a output at output terminal.Otherwise it is OFF.\u003cbr\u003e8\u0026gt;.CC LED:Red LED.Constant current output indicator.It enters the constant current state when the load current reaches the set current and CC constant current indicator turns ON.\u003cbr\u003e9\u0026gt;.FULL LED:Green LED.Charged fully indicator.When battery is charged fully.It will turn ON.It will turn ON if output current is less than 0.2A when the Set Current is 2A.\u003cbr\u003e10\u0026gt;.CHAR LED:Charging indicator.It will turn ON when charging.\u003cbr\u003e\u003cbr\u003e5.Using Steps:\u003cbr\u003e\u003cbr\u003e1\u0026gt;.As a ordinary step down power module:\u003cbr\u003e1.1\u0026gt;.Connect right input voltage at input terminal;\u003cbr\u003e1.2\u0026gt;.Adjust '+' and ' - ' constant voltage buttons to set output voltage according to require.\u003cbr\u003e1.3\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e1.4\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e1.5\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require overcurrent protection value.\u003cbr\u003e1.6\u0026gt;.Test and using(E.g:Module's maximum output current is 2A if display 2A on multimeter.Then the maximum current can only be 2A when use this module.Red LED indicator will turn on if output reach to 2A.Otherwise LED is OFF.)\u003cbr\u003e1.7\u0026gt;.The output voltage will decrease due to the current sampling resistor at the output. The higher the current, the more the voltage is reduced.\u003cbr\u003e2\u0026gt;.As a charger:\u003cbr\u003e2.1\u0026gt;.Tops:Power module can not be used as charger module if it does not support constant current function.The voltage difference between the battery with insufficient voltage and the charger is very large.That causes excessive charging current even damage the battery.So it needs keep charging in constant current mode to reaching a certain level.Then automatically switch back to constant voltage charging.\u003cbr\u003e2.2\u0026gt;.Make sure floating charge voltage and charge current for battery.If the lithium battery's parameter is 3.7V\/2200mAh, then the float charge voltage is 4.2V, and the maximum charging current is 1C, which is 2200mA.\u003cbr\u003e2.3\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e2.4\u0026gt;.Test output voltage by multimeter and adjust '+' and ' - ' constant voltage buttons to make sure output voltage reach to require floating charge voltage.(If charge a 3.7V lithium battery, adjust the output voltage to 4.2V)\u003cbr\u003e2.5\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e2.6\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e2.7\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require charge current value.\u003cbr\u003e2.8\u0026gt;.Connect battery at output terminal and start to charging.\u003cbr\u003e3\u0026gt;.As a high power LED constant current driver:\u003cbr\u003e3.1\u0026gt;.Make sure LED's working current and maximum working voltage.\u003cbr\u003e3.2\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e3.3\u0026gt;.Test output voltage by multimeter at output terminal and adjust '+' and ' - ' buttons to set output voltage to LED's maximum working voltage.\u003cbr\u003e3.4\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns.\u003cbr\u003e3.5\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e3.6\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require LED working current.\u003cbr\u003e3.7\u0026gt;.Connect LED and test.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6.Note:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Default output voltage is about 5V.\u003cbr\u003e2.It is a step down power supply module,So the output voltage must be lower than input voltage.Otherwise it will not working normally.\u003cbr\u003e3.Please press button ' - ' repeatedly if there is no output voltage.\u003cbr\u003e4.It is a DC power module,So it can not connect to AC power.\u003cbr\u003e5.Please don't short output.\u003cbr\u003e6.Input voltage must be 0.5V higher than output voltage.\u003cbr\u003e7.Please connect input before connect battery when use as charge and make sure output voltage is higher than battery voltage.It is recommended to serial a anti-backflow diode at input positive terminal.\u003cbr\u003e8.'IN-' and ‘OUT-' can not be connect together,otherwise module can not support constant current output.\u003cbr\u003e9.Please make sure input power is more than load power.\u003cbr\u003e10.Please step down output power if module is hot.\u003cbr\u003e11.The module's output voltage and current accuracy are 0.1V and 0.05A.\u003cbr\u003e12.Please read use manual and description before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7.Application:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Ordinary power supply;\u003cbr\u003e2.Battery charger;\u003cbr\u003e3.LED drive power;\u003cbr\u003e4.Instrument voltage display;\u003cbr\u003e5.Test meter;\u003cbr\u003e6.Circuit test;\u003cbr\u003e7.Power conversion.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1PC*DC-DC 5A CNC Step-down Module\u003cbr\u003e1PC*Shell\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H5ad2b60612bb478489a268788acb26e6M.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Hd124e1a6e1ec438387078541012b2a6er.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Ha5780c34dbf1414096b513d49ee81157Y.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/He5228a9f264442fe929fec6bb8a64185W.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H4ec195ebf02c4fa7ae252d6f2a642a51A.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H06bd932f2f8f4ca3854afc9b63768f7dJ.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H19a95ffb00b24b7887439209f2cecd0cj.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H13717b2c8e514f39bfb0728a92c6b03fl.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1yMJBXQ9E3KVjSZFGq6A19XXaz.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fnNzXL1H3KVjSZFHq6zKppXaf.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1kTJAXUGF3KVjSZFvq6z_nXXaQ.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H1b1ce425060940c580c345ab16725a4ez.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $9.65{"id":4521876848727,"title":"1.2-32V 5A Constant Voltage Current LCD Digital Voltage Current Display Adjustable Buck Step Down Power Supply Module With Case","handle":"1-2-32v-5a-constant-voltage-current-lcd-digital-voltage-current-display-adjustable-buck-step-down-power-supply-module-with-case","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eZK-J5X is a DC adjustable constant voltage constant current step down power supply module with LCD display.HD display input voltage and output voltage, current, power and display status.Adjustable stable output voltage and current.Set output current to meet the demand.It can be used as ordinary buck power supply module, charger and LED constant current driver.Simple and efficient, practical.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eHigh voltage resistant terminal;\u003cbr\u003eWith high quality acrylic shell;\u003cbr\u003eSupport complete disability output;\u003cbr\u003eSupport anti-reverse protection;\u003cbr\u003eSupport short circuit protection;\u003cbr\u003eSupport enable output;\u003cbr\u003eLCD screen HD display;\u003cbr\u003eSupport charging function;\u003cbr\u003eSupport select output;\u003cbr\u003eSupport display input voltage;\u003cbr\u003eSupport display output voltage, current, power;\u003cbr\u003eSupport working status indicator;\u003cbr\u003eMultiple parameters are displayed simultaneous;\u003cbr\u003eHigh current, low heat;\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eProduct Name: 5A Step Down Power Supply Module\u003cbr\u003e\u003cbr\u003eWorking Voltage:DC 6.5V-36V\u003cbr\u003eOutput Voltage:DC 1.2V-32V\u003cbr\u003eOutput Current:5A(4.5A need heat sink;3.5A is stable for long time)\u003cbr\u003eOutput Power:75W(75W need heat sink;50W is for 3.5A)\u003cbr\u003eVoltage Display Range:1.2~32V\u003cbr\u003eVoltage Display Precision:+\/-0.1V\u003cbr\u003eVoltage Display Resolution:0.05V\u003cbr\u003eCurrent Display Range:0~5A\u003cbr\u003eCurrent Display Precision:+\/-0.05A\u003cbr\u003eVoltage Display Resolution:0.005A\u003cbr\u003eConversion efficiency:About 94%\u003cbr\u003eWorking current:30mA\u003cbr\u003eSoft Starter:Yes(Failure at high power load)\u003cbr\u003eAnti-reverse Protection:Yes\u003cbr\u003eAnti-backflow Protection:No(It is recommended to connect a diode in series at the ‘OUT+')\u003cbr\u003eWorking Temperature range:-20°~85°\u003cbr\u003eWorking Humidity range:0%-95%RH\u003cbr\u003eSize with shell:70.5*48.4*30mm\u003cbr\u003eHeat Sink Size:20*14*6mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4.Button\/Potentiometer\/LED introduction:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1\u0026gt;.Long press means need keep press for more than 3second.\u003cbr\u003e2\u0026gt;.ON\/OFF:Short Press to select whether output voltage.Long press is used to restore default settings for next re-power.\u003cbr\u003e3\u0026gt;.IN\/OUT:Short Press to switch display input voltage or output voltage.Long press is used to switch display output current or output power.\u003cbr\u003e4\u0026gt;.'+' Button:It is used to regulate output voltage.Increase output voltage.Each time the button is pressed for short press,the output voltage is increased by 0.05V.Long press can continuously increase.Increase 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e5\u0026gt;.' - ' Button:It is used to regulate output voltage.Decrease output voltage.Each time the button is pressed for short press,the output voltage is decreased by 0.05V.Long press can continuously decrease.Decrease 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e6\u0026gt;.ADJ-I Potentiometer:Adjust output current.Increase the output current when rotating clockwise.Module enters constant current output state if load current reach the Set Current Value.Constant current Red LED indicator CC will turn ON.\u003cbr\u003e7\u0026gt;.ON LED:Green LED.Output indicator.It will turn ON when there is a output at output terminal.Otherwise it is OFF.\u003cbr\u003e8\u0026gt;.CC LED:Red LED.Constant current output indicator.It enters the constant current state when the load current reaches the set current and CC constant current indicator turns ON.\u003cbr\u003e9\u0026gt;.FULL LED:Green LED.Charged fully indicator.When battery is charged fully.It will turn ON.It will turn ON if output current is less than 0.2A when the Set Current is 2A.\u003cbr\u003e10\u0026gt;.CHAR LED:Charging indicator.It will turn ON when charging.\u003cbr\u003e\u003cbr\u003e5.Using Steps:\u003cbr\u003e\u003cbr\u003e1\u0026gt;.As a ordinary step down power module:\u003cbr\u003e1.1\u0026gt;.Connect right input voltage at input terminal;\u003cbr\u003e1.2\u0026gt;.Adjust '+' and ' - ' constant voltage buttons to set output voltage according to require.\u003cbr\u003e1.3\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e1.4\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e1.5\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require overcurrent protection value.\u003cbr\u003e1.6\u0026gt;.Test and using(E.g:Module's maximum output current is 2A if display 2A on multimeter.Then the maximum current can only be 2A when use this module.Red LED indicator will turn on if output reach to 2A.Otherwise LED is OFF.)\u003cbr\u003e1.7\u0026gt;.The output voltage will decrease due to the current sampling resistor at the output. The higher the current, the more the voltage is reduced.\u003cbr\u003e2\u0026gt;.As a charger:\u003cbr\u003e2.1\u0026gt;.Tops:Power module can not be used as charger module if it does not support constant current function.The voltage difference between the battery with insufficient voltage and the charger is very large.That causes excessive charging current even damage the battery.So it needs keep charging in constant current mode to reaching a certain level.Then automatically switch back to constant voltage charging.\u003cbr\u003e2.2\u0026gt;.Make sure floating charge voltage and charge current for battery.If the lithium battery's parameter is 3.7V\/2200mAh, then the float charge voltage is 4.2V, and the maximum charging current is 1C, which is 2200mA.\u003cbr\u003e2.3\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e2.4\u0026gt;.Test output voltage by multimeter and adjust '+' and ' - ' constant voltage buttons to make sure output voltage reach to require floating charge voltage.(If charge a 3.7V lithium battery, adjust the output voltage to 4.2V)\u003cbr\u003e2.5\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e2.6\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e2.7\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require charge current value.\u003cbr\u003e2.8\u0026gt;.Connect battery at output terminal and start to charging.\u003cbr\u003e3\u0026gt;.As a high power LED constant current driver:\u003cbr\u003e3.1\u0026gt;.Make sure LED's working current and maximum working voltage.\u003cbr\u003e3.2\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e3.3\u0026gt;.Test output voltage by multimeter at output terminal and adjust '+' and ' - ' buttons to set output voltage to LED's maximum working voltage.\u003cbr\u003e3.4\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns.\u003cbr\u003e3.5\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e3.6\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require LED working current.\u003cbr\u003e3.7\u0026gt;.Connect LED and test.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6.Note:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Default output voltage is about 5V.\u003cbr\u003e2.It is a step down power supply module,So the output voltage must be lower than input voltage.Otherwise it will not working normally.\u003cbr\u003e3.Please press button ' - ' repeatedly if there is no output voltage.\u003cbr\u003e4.It is a DC power module,So it can not connect to AC power.\u003cbr\u003e5.Please don't short output.\u003cbr\u003e6.Input voltage must be 0.5V higher than output voltage.\u003cbr\u003e7.Please connect input before connect battery when use as charge and make sure output voltage is higher than battery voltage.It is recommended to serial a anti-backflow diode at input positive terminal.\u003cbr\u003e8.'IN-' and ‘OUT-' can not be connect together,otherwise module can not support constant current output.\u003cbr\u003e9.Please make sure input power is more than load power.\u003cbr\u003e10.Please step down output power if module is hot.\u003cbr\u003e11.The module's output voltage and current accuracy are 0.1V and 0.05A.\u003cbr\u003e12.Please read use manual and description before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7.Application:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Ordinary power supply;\u003cbr\u003e2.Battery charger;\u003cbr\u003e3.LED drive power;\u003cbr\u003e4.Instrument voltage display;\u003cbr\u003e5.Test meter;\u003cbr\u003e6.Circuit test;\u003cbr\u003e7.Power conversion.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1PC*DC-DC 5A CNC Step-down Module\u003cbr\u003e1PC*Shell\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H5ad2b60612bb478489a268788acb26e6M.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Hd124e1a6e1ec438387078541012b2a6er.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Ha5780c34dbf1414096b513d49ee81157Y.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/He5228a9f264442fe929fec6bb8a64185W.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H4ec195ebf02c4fa7ae252d6f2a642a51A.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H06bd932f2f8f4ca3854afc9b63768f7dJ.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H19a95ffb00b24b7887439209f2cecd0cj.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H13717b2c8e514f39bfb0728a92c6b03fl.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1yMJBXQ9E3KVjSZFGq6A19XXaz.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fnNzXL1H3KVjSZFHq6zKppXaf.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1kTJAXUGF3KVjSZFvq6z_nXXaQ.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H1b1ce425060940c580c345ab16725a4ez.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-05-22T21:43:35+08:00","created_at":"2020-05-22T21:43:38+08:00","vendor":"DIYTECH","type":"Step Up\/Down Module","tags":["Display"],"price":474,"price_min":474,"price_max":474,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32030545117271,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DT2242","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"1.2-32V 5A Constant Voltage Current LCD Digital Voltage Current Display Adjustable Buck Step Down Power Supply Module With Case","public_title":null,"options":["Default Title"],"price":474,"weight":66,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_LYRik.jpg?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_m8KkK.jpg?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_Fnc78.jpg?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162829_666vZ.jpg?v=1590489807"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807","options":["Title"],"media":[{"alt":null,"id":6299818164311,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807","width":800},{"alt":null,"id":6299819507799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_LYRik.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_LYRik.jpg?v=1590489807","width":1000},{"alt":null,"id":6299821572183,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_m8KkK.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_m8KkK.jpg?v=1590489807","width":1000},{"alt":null,"id":6299821867095,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_Fnc78.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_Fnc78.jpg?v=1590489807","width":1000},{"alt":"1.2-32V 5A Constant Voltage Current Lcd Digital Display Adjustable Buck Step Down Power Supply","id":6276753293399,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162829_666vZ.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162829_666vZ.jpg?v=1590489807","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eZK-J5X is a DC adjustable constant voltage constant current step down power supply module with LCD display.HD display input voltage and output voltage, current, power and display status.Adjustable stable output voltage and current.Set output current to meet the demand.It can be used as ordinary buck power supply module, charger and LED constant current driver.Simple and efficient, practical.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eHigh voltage resistant terminal;\u003cbr\u003eWith high quality acrylic shell;\u003cbr\u003eSupport complete disability output;\u003cbr\u003eSupport anti-reverse protection;\u003cbr\u003eSupport short circuit protection;\u003cbr\u003eSupport enable output;\u003cbr\u003eLCD screen HD display;\u003cbr\u003eSupport charging function;\u003cbr\u003eSupport select output;\u003cbr\u003eSupport display input voltage;\u003cbr\u003eSupport display output voltage, current, power;\u003cbr\u003eSupport working status indicator;\u003cbr\u003eMultiple parameters are displayed simultaneous;\u003cbr\u003eHigh current, low heat;\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eProduct Name: 5A Step Down Power Supply Module\u003cbr\u003e\u003cbr\u003eWorking Voltage:DC 6.5V-36V\u003cbr\u003eOutput Voltage:DC 1.2V-32V\u003cbr\u003eOutput Current:5A(4.5A need heat sink;3.5A is stable for long time)\u003cbr\u003eOutput Power:75W(75W need heat sink;50W is for 3.5A)\u003cbr\u003eVoltage Display Range:1.2~32V\u003cbr\u003eVoltage Display Precision:+\/-0.1V\u003cbr\u003eVoltage Display Resolution:0.05V\u003cbr\u003eCurrent Display Range:0~5A\u003cbr\u003eCurrent Display Precision:+\/-0.05A\u003cbr\u003eVoltage Display Resolution:0.005A\u003cbr\u003eConversion efficiency:About 94%\u003cbr\u003eWorking current:30mA\u003cbr\u003eSoft Starter:Yes(Failure at high power load)\u003cbr\u003eAnti-reverse Protection:Yes\u003cbr\u003eAnti-backflow Protection:No(It is recommended to connect a diode in series at the ‘OUT+')\u003cbr\u003eWorking Temperature range:-20°~85°\u003cbr\u003eWorking Humidity range:0%-95%RH\u003cbr\u003eSize with shell:70.5*48.4*30mm\u003cbr\u003eHeat Sink Size:20*14*6mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4.Button\/Potentiometer\/LED introduction:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1\u0026gt;.Long press means need keep press for more than 3second.\u003cbr\u003e2\u0026gt;.ON\/OFF:Short Press to select whether output voltage.Long press is used to restore default settings for next re-power.\u003cbr\u003e3\u0026gt;.IN\/OUT:Short Press to switch display input voltage or output voltage.Long press is used to switch display output current or output power.\u003cbr\u003e4\u0026gt;.'+' Button:It is used to regulate output voltage.Increase output voltage.Each time the button is pressed for short press,the output voltage is increased by 0.05V.Long press can continuously increase.Increase 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e5\u0026gt;.' - ' Button:It is used to regulate output voltage.Decrease output voltage.Each time the button is pressed for short press,the output voltage is decreased by 0.05V.Long press can continuously decrease.Decrease 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e6\u0026gt;.ADJ-I Potentiometer:Adjust output current.Increase the output current when rotating clockwise.Module enters constant current output state if load current reach the Set Current Value.Constant current Red LED indicator CC will turn ON.\u003cbr\u003e7\u0026gt;.ON LED:Green LED.Output indicator.It will turn ON when there is a output at output terminal.Otherwise it is OFF.\u003cbr\u003e8\u0026gt;.CC LED:Red LED.Constant current output indicator.It enters the constant current state when the load current reaches the set current and CC constant current indicator turns ON.\u003cbr\u003e9\u0026gt;.FULL LED:Green LED.Charged fully indicator.When battery is charged fully.It will turn ON.It will turn ON if output current is less than 0.2A when the Set Current is 2A.\u003cbr\u003e10\u0026gt;.CHAR LED:Charging indicator.It will turn ON when charging.\u003cbr\u003e\u003cbr\u003e5.Using Steps:\u003cbr\u003e\u003cbr\u003e1\u0026gt;.As a ordinary step down power module:\u003cbr\u003e1.1\u0026gt;.Connect right input voltage at input terminal;\u003cbr\u003e1.2\u0026gt;.Adjust '+' and ' - ' constant voltage buttons to set output voltage according to require.\u003cbr\u003e1.3\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e1.4\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e1.5\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require overcurrent protection value.\u003cbr\u003e1.6\u0026gt;.Test and using(E.g:Module's maximum output current is 2A if display 2A on multimeter.Then the maximum current can only be 2A when use this module.Red LED indicator will turn on if output reach to 2A.Otherwise LED is OFF.)\u003cbr\u003e1.7\u0026gt;.The output voltage will decrease due to the current sampling resistor at the output. The higher the current, the more the voltage is reduced.\u003cbr\u003e2\u0026gt;.As a charger:\u003cbr\u003e2.1\u0026gt;.Tops:Power module can not be used as charger module if it does not support constant current function.The voltage difference between the battery with insufficient voltage and the charger is very large.That causes excessive charging current even damage the battery.So it needs keep charging in constant current mode to reaching a certain level.Then automatically switch back to constant voltage charging.\u003cbr\u003e2.2\u0026gt;.Make sure floating charge voltage and charge current for battery.If the lithium battery's parameter is 3.7V\/2200mAh, then the float charge voltage is 4.2V, and the maximum charging current is 1C, which is 2200mA.\u003cbr\u003e2.3\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e2.4\u0026gt;.Test output voltage by multimeter and adjust '+' and ' - ' constant voltage buttons to make sure output voltage reach to require floating charge voltage.(If charge a 3.7V lithium battery, adjust the output voltage to 4.2V)\u003cbr\u003e2.5\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e2.6\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e2.7\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require charge current value.\u003cbr\u003e2.8\u0026gt;.Connect battery at output terminal and start to charging.\u003cbr\u003e3\u0026gt;.As a high power LED constant current driver:\u003cbr\u003e3.1\u0026gt;.Make sure LED's working current and maximum working voltage.\u003cbr\u003e3.2\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e3.3\u0026gt;.Test output voltage by multimeter at output terminal and adjust '+' and ' - ' buttons to set output voltage to LED's maximum working voltage.\u003cbr\u003e3.4\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns.\u003cbr\u003e3.5\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e3.6\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require LED working current.\u003cbr\u003e3.7\u0026gt;.Connect LED and test.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6.Note:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Default output voltage is about 5V.\u003cbr\u003e2.It is a step down power supply module,So the output voltage must be lower than input voltage.Otherwise it will not working normally.\u003cbr\u003e3.Please press button ' - ' repeatedly if there is no output voltage.\u003cbr\u003e4.It is a DC power module,So it can not connect to AC power.\u003cbr\u003e5.Please don't short output.\u003cbr\u003e6.Input voltage must be 0.5V higher than output voltage.\u003cbr\u003e7.Please connect input before connect battery when use as charge and make sure output voltage is higher than battery voltage.It is recommended to serial a anti-backflow diode at input positive terminal.\u003cbr\u003e8.'IN-' and ‘OUT-' can not be connect together,otherwise module can not support constant current output.\u003cbr\u003e9.Please make sure input power is more than load power.\u003cbr\u003e10.Please step down output power if module is hot.\u003cbr\u003e11.The module's output voltage and current accuracy are 0.1V and 0.05A.\u003cbr\u003e12.Please read use manual and description before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7.Application:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Ordinary power supply;\u003cbr\u003e2.Battery charger;\u003cbr\u003e3.LED drive power;\u003cbr\u003e4.Instrument voltage display;\u003cbr\u003e5.Test meter;\u003cbr\u003e6.Circuit test;\u003cbr\u003e7.Power conversion.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1PC*DC-DC 5A CNC Step-down Module\u003cbr\u003e1PC*Shell\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H5ad2b60612bb478489a268788acb26e6M.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Hd124e1a6e1ec438387078541012b2a6er.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Ha5780c34dbf1414096b513d49ee81157Y.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/He5228a9f264442fe929fec6bb8a64185W.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H4ec195ebf02c4fa7ae252d6f2a642a51A.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H06bd932f2f8f4ca3854afc9b63768f7dJ.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H19a95ffb00b24b7887439209f2cecd0cj.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H13717b2c8e514f39bfb0728a92c6b03fl.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1yMJBXQ9E3KVjSZFGq6A19XXaz.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fnNzXL1H3KVjSZFHq6zKppXaf.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1kTJAXUGF3KVjSZFvq6z_nXXaQ.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H1b1ce425060940c580c345ab16725a4ez.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $7.21{"id":4521876848727,"title":"1.2-32V 5A Constant Voltage Current LCD Digital Voltage Current Display Adjustable Buck Step Down Power Supply Module With Case","handle":"1-2-32v-5a-constant-voltage-current-lcd-digital-voltage-current-display-adjustable-buck-step-down-power-supply-module-with-case","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eZK-J5X is a DC adjustable constant voltage constant current step down power supply module with LCD display.HD display input voltage and output voltage, current, power and display status.Adjustable stable output voltage and current.Set output current to meet the demand.It can be used as ordinary buck power supply module, charger and LED constant current driver.Simple and efficient, practical.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eHigh voltage resistant terminal;\u003cbr\u003eWith high quality acrylic shell;\u003cbr\u003eSupport complete disability output;\u003cbr\u003eSupport anti-reverse protection;\u003cbr\u003eSupport short circuit protection;\u003cbr\u003eSupport enable output;\u003cbr\u003eLCD screen HD display;\u003cbr\u003eSupport charging function;\u003cbr\u003eSupport select output;\u003cbr\u003eSupport display input voltage;\u003cbr\u003eSupport display output voltage, current, power;\u003cbr\u003eSupport working status indicator;\u003cbr\u003eMultiple parameters are displayed simultaneous;\u003cbr\u003eHigh current, low heat;\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eProduct Name: 5A Step Down Power Supply Module\u003cbr\u003e\u003cbr\u003eWorking Voltage:DC 6.5V-36V\u003cbr\u003eOutput Voltage:DC 1.2V-32V\u003cbr\u003eOutput Current:5A(4.5A need heat sink;3.5A is stable for long time)\u003cbr\u003eOutput Power:75W(75W need heat sink;50W is for 3.5A)\u003cbr\u003eVoltage Display Range:1.2~32V\u003cbr\u003eVoltage Display Precision:+\/-0.1V\u003cbr\u003eVoltage Display Resolution:0.05V\u003cbr\u003eCurrent Display Range:0~5A\u003cbr\u003eCurrent Display Precision:+\/-0.05A\u003cbr\u003eVoltage Display Resolution:0.005A\u003cbr\u003eConversion efficiency:About 94%\u003cbr\u003eWorking current:30mA\u003cbr\u003eSoft Starter:Yes(Failure at high power load)\u003cbr\u003eAnti-reverse Protection:Yes\u003cbr\u003eAnti-backflow Protection:No(It is recommended to connect a diode in series at the ‘OUT+')\u003cbr\u003eWorking Temperature range:-20°~85°\u003cbr\u003eWorking Humidity range:0%-95%RH\u003cbr\u003eSize with shell:70.5*48.4*30mm\u003cbr\u003eHeat Sink Size:20*14*6mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4.Button\/Potentiometer\/LED introduction:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1\u0026gt;.Long press means need keep press for more than 3second.\u003cbr\u003e2\u0026gt;.ON\/OFF:Short Press to select whether output voltage.Long press is used to restore default settings for next re-power.\u003cbr\u003e3\u0026gt;.IN\/OUT:Short Press to switch display input voltage or output voltage.Long press is used to switch display output current or output power.\u003cbr\u003e4\u0026gt;.'+' Button:It is used to regulate output voltage.Increase output voltage.Each time the button is pressed for short press,the output voltage is increased by 0.05V.Long press can continuously increase.Increase 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e5\u0026gt;.' - ' Button:It is used to regulate output voltage.Decrease output voltage.Each time the button is pressed for short press,the output voltage is decreased by 0.05V.Long press can continuously decrease.Decrease 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e6\u0026gt;.ADJ-I Potentiometer:Adjust output current.Increase the output current when rotating clockwise.Module enters constant current output state if load current reach the Set Current Value.Constant current Red LED indicator CC will turn ON.\u003cbr\u003e7\u0026gt;.ON LED:Green LED.Output indicator.It will turn ON when there is a output at output terminal.Otherwise it is OFF.\u003cbr\u003e8\u0026gt;.CC LED:Red LED.Constant current output indicator.It enters the constant current state when the load current reaches the set current and CC constant current indicator turns ON.\u003cbr\u003e9\u0026gt;.FULL LED:Green LED.Charged fully indicator.When battery is charged fully.It will turn ON.It will turn ON if output current is less than 0.2A when the Set Current is 2A.\u003cbr\u003e10\u0026gt;.CHAR LED:Charging indicator.It will turn ON when charging.\u003cbr\u003e\u003cbr\u003e5.Using Steps:\u003cbr\u003e\u003cbr\u003e1\u0026gt;.As a ordinary step down power module:\u003cbr\u003e1.1\u0026gt;.Connect right input voltage at input terminal;\u003cbr\u003e1.2\u0026gt;.Adjust '+' and ' - ' constant voltage buttons to set output voltage according to require.\u003cbr\u003e1.3\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e1.4\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e1.5\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require overcurrent protection value.\u003cbr\u003e1.6\u0026gt;.Test and using(E.g:Module's maximum output current is 2A if display 2A on multimeter.Then the maximum current can only be 2A when use this module.Red LED indicator will turn on if output reach to 2A.Otherwise LED is OFF.)\u003cbr\u003e1.7\u0026gt;.The output voltage will decrease due to the current sampling resistor at the output. The higher the current, the more the voltage is reduced.\u003cbr\u003e2\u0026gt;.As a charger:\u003cbr\u003e2.1\u0026gt;.Tops:Power module can not be used as charger module if it does not support constant current function.The voltage difference between the battery with insufficient voltage and the charger is very large.That causes excessive charging current even damage the battery.So it needs keep charging in constant current mode to reaching a certain level.Then automatically switch back to constant voltage charging.\u003cbr\u003e2.2\u0026gt;.Make sure floating charge voltage and charge current for battery.If the lithium battery's parameter is 3.7V\/2200mAh, then the float charge voltage is 4.2V, and the maximum charging current is 1C, which is 2200mA.\u003cbr\u003e2.3\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e2.4\u0026gt;.Test output voltage by multimeter and adjust '+' and ' - ' constant voltage buttons to make sure output voltage reach to require floating charge voltage.(If charge a 3.7V lithium battery, adjust the output voltage to 4.2V)\u003cbr\u003e2.5\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e2.6\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e2.7\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require charge current value.\u003cbr\u003e2.8\u0026gt;.Connect battery at output terminal and start to charging.\u003cbr\u003e3\u0026gt;.As a high power LED constant current driver:\u003cbr\u003e3.1\u0026gt;.Make sure LED's working current and maximum working voltage.\u003cbr\u003e3.2\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e3.3\u0026gt;.Test output voltage by multimeter at output terminal and adjust '+' and ' - ' buttons to set output voltage to LED's maximum working voltage.\u003cbr\u003e3.4\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns.\u003cbr\u003e3.5\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e3.6\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require LED working current.\u003cbr\u003e3.7\u0026gt;.Connect LED and test.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6.Note:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Default output voltage is about 5V.\u003cbr\u003e2.It is a step down power supply module,So the output voltage must be lower than input voltage.Otherwise it will not working normally.\u003cbr\u003e3.Please press button ' - ' repeatedly if there is no output voltage.\u003cbr\u003e4.It is a DC power module,So it can not connect to AC power.\u003cbr\u003e5.Please don't short output.\u003cbr\u003e6.Input voltage must be 0.5V higher than output voltage.\u003cbr\u003e7.Please connect input before connect battery when use as charge and make sure output voltage is higher than battery voltage.It is recommended to serial a anti-backflow diode at input positive terminal.\u003cbr\u003e8.'IN-' and ‘OUT-' can not be connect together,otherwise module can not support constant current output.\u003cbr\u003e9.Please make sure input power is more than load power.\u003cbr\u003e10.Please step down output power if module is hot.\u003cbr\u003e11.The module's output voltage and current accuracy are 0.1V and 0.05A.\u003cbr\u003e12.Please read use manual and description before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7.Application:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Ordinary power supply;\u003cbr\u003e2.Battery charger;\u003cbr\u003e3.LED drive power;\u003cbr\u003e4.Instrument voltage display;\u003cbr\u003e5.Test meter;\u003cbr\u003e6.Circuit test;\u003cbr\u003e7.Power conversion.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1PC*DC-DC 5A CNC Step-down Module\u003cbr\u003e1PC*Shell\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H5ad2b60612bb478489a268788acb26e6M.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Hd124e1a6e1ec438387078541012b2a6er.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Ha5780c34dbf1414096b513d49ee81157Y.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/He5228a9f264442fe929fec6bb8a64185W.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H4ec195ebf02c4fa7ae252d6f2a642a51A.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H06bd932f2f8f4ca3854afc9b63768f7dJ.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H19a95ffb00b24b7887439209f2cecd0cj.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H13717b2c8e514f39bfb0728a92c6b03fl.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1yMJBXQ9E3KVjSZFGq6A19XXaz.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fnNzXL1H3KVjSZFHq6zKppXaf.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1kTJAXUGF3KVjSZFvq6z_nXXaQ.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H1b1ce425060940c580c345ab16725a4ez.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-05-22T21:43:35+08:00","created_at":"2020-05-22T21:43:38+08:00","vendor":"DIYTECH","type":"Step Up\/Down Module","tags":["Display"],"price":474,"price_min":474,"price_max":474,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32030545117271,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DT2242","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"1.2-32V 5A Constant Voltage Current LCD Digital Voltage Current Display Adjustable Buck Step Down Power Supply Module With Case","public_title":null,"options":["Default Title"],"price":474,"weight":66,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_LYRik.jpg?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_m8KkK.jpg?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_Fnc78.jpg?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162829_666vZ.jpg?v=1590489807"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807","options":["Title"],"media":[{"alt":null,"id":6299818164311,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807","width":800},{"alt":null,"id":6299819507799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_LYRik.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_LYRik.jpg?v=1590489807","width":1000},{"alt":null,"id":6299821572183,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_m8KkK.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_m8KkK.jpg?v=1590489807","width":1000},{"alt":null,"id":6299821867095,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_Fnc78.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_Fnc78.jpg?v=1590489807","width":1000},{"alt":"1.2-32V 5A Constant Voltage Current Lcd Digital Display Adjustable Buck Step Down Power Supply","id":6276753293399,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162829_666vZ.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162829_666vZ.jpg?v=1590489807","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eZK-J5X is a DC adjustable constant voltage constant current step down power supply module with LCD display.HD display input voltage and output voltage, current, power and display status.Adjustable stable output voltage and current.Set output current to meet the demand.It can be used as ordinary buck power supply module, charger and LED constant current driver.Simple and efficient, practical.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eHigh voltage resistant terminal;\u003cbr\u003eWith high quality acrylic shell;\u003cbr\u003eSupport complete disability output;\u003cbr\u003eSupport anti-reverse protection;\u003cbr\u003eSupport short circuit protection;\u003cbr\u003eSupport enable output;\u003cbr\u003eLCD screen HD display;\u003cbr\u003eSupport charging function;\u003cbr\u003eSupport select output;\u003cbr\u003eSupport display input voltage;\u003cbr\u003eSupport display output voltage, current, power;\u003cbr\u003eSupport working status indicator;\u003cbr\u003eMultiple parameters are displayed simultaneous;\u003cbr\u003eHigh current, low heat;\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eProduct Name: 5A Step Down Power Supply Module\u003cbr\u003e\u003cbr\u003eWorking Voltage:DC 6.5V-36V\u003cbr\u003eOutput Voltage:DC 1.2V-32V\u003cbr\u003eOutput Current:5A(4.5A need heat sink;3.5A is stable for long time)\u003cbr\u003eOutput Power:75W(75W need heat sink;50W is for 3.5A)\u003cbr\u003eVoltage Display Range:1.2~32V\u003cbr\u003eVoltage Display Precision:+\/-0.1V\u003cbr\u003eVoltage Display Resolution:0.05V\u003cbr\u003eCurrent Display Range:0~5A\u003cbr\u003eCurrent Display Precision:+\/-0.05A\u003cbr\u003eVoltage Display Resolution:0.005A\u003cbr\u003eConversion efficiency:About 94%\u003cbr\u003eWorking current:30mA\u003cbr\u003eSoft Starter:Yes(Failure at high power load)\u003cbr\u003eAnti-reverse Protection:Yes\u003cbr\u003eAnti-backflow Protection:No(It is recommended to connect a diode in series at the ‘OUT+')\u003cbr\u003eWorking Temperature range:-20°~85°\u003cbr\u003eWorking Humidity range:0%-95%RH\u003cbr\u003eSize with shell:70.5*48.4*30mm\u003cbr\u003eHeat Sink Size:20*14*6mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4.Button\/Potentiometer\/LED introduction:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1\u0026gt;.Long press means need keep press for more than 3second.\u003cbr\u003e2\u0026gt;.ON\/OFF:Short Press to select whether output voltage.Long press is used to restore default settings for next re-power.\u003cbr\u003e3\u0026gt;.IN\/OUT:Short Press to switch display input voltage or output voltage.Long press is used to switch display output current or output power.\u003cbr\u003e4\u0026gt;.'+' Button:It is used to regulate output voltage.Increase output voltage.Each time the button is pressed for short press,the output voltage is increased by 0.05V.Long press can continuously increase.Increase 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e5\u0026gt;.' - ' Button:It is used to regulate output voltage.Decrease output voltage.Each time the button is pressed for short press,the output voltage is decreased by 0.05V.Long press can continuously decrease.Decrease 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e6\u0026gt;.ADJ-I Potentiometer:Adjust output current.Increase the output current when rotating clockwise.Module enters constant current output state if load current reach the Set Current Value.Constant current Red LED indicator CC will turn ON.\u003cbr\u003e7\u0026gt;.ON LED:Green LED.Output indicator.It will turn ON when there is a output at output terminal.Otherwise it is OFF.\u003cbr\u003e8\u0026gt;.CC LED:Red LED.Constant current output indicator.It enters the constant current state when the load current reaches the set current and CC constant current indicator turns ON.\u003cbr\u003e9\u0026gt;.FULL LED:Green LED.Charged fully indicator.When battery is charged fully.It will turn ON.It will turn ON if output current is less than 0.2A when the Set Current is 2A.\u003cbr\u003e10\u0026gt;.CHAR LED:Charging indicator.It will turn ON when charging.\u003cbr\u003e\u003cbr\u003e5.Using Steps:\u003cbr\u003e\u003cbr\u003e1\u0026gt;.As a ordinary step down power module:\u003cbr\u003e1.1\u0026gt;.Connect right input voltage at input terminal;\u003cbr\u003e1.2\u0026gt;.Adjust '+' and ' - ' constant voltage buttons to set output voltage according to require.\u003cbr\u003e1.3\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e1.4\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e1.5\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require overcurrent protection value.\u003cbr\u003e1.6\u0026gt;.Test and using(E.g:Module's maximum output current is 2A if display 2A on multimeter.Then the maximum current can only be 2A when use this module.Red LED indicator will turn on if output reach to 2A.Otherwise LED is OFF.)\u003cbr\u003e1.7\u0026gt;.The output voltage will decrease due to the current sampling resistor at the output. The higher the current, the more the voltage is reduced.\u003cbr\u003e2\u0026gt;.As a charger:\u003cbr\u003e2.1\u0026gt;.Tops:Power module can not be used as charger module if it does not support constant current function.The voltage difference between the battery with insufficient voltage and the charger is very large.That causes excessive charging current even damage the battery.So it needs keep charging in constant current mode to reaching a certain level.Then automatically switch back to constant voltage charging.\u003cbr\u003e2.2\u0026gt;.Make sure floating charge voltage and charge current for battery.If the lithium battery's parameter is 3.7V\/2200mAh, then the float charge voltage is 4.2V, and the maximum charging current is 1C, which is 2200mA.\u003cbr\u003e2.3\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e2.4\u0026gt;.Test output voltage by multimeter and adjust '+' and ' - ' constant voltage buttons to make sure output voltage reach to require floating charge voltage.(If charge a 3.7V lithium battery, adjust the output voltage to 4.2V)\u003cbr\u003e2.5\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e2.6\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e2.7\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require charge current value.\u003cbr\u003e2.8\u0026gt;.Connect battery at output terminal and start to charging.\u003cbr\u003e3\u0026gt;.As a high power LED constant current driver:\u003cbr\u003e3.1\u0026gt;.Make sure LED's working current and maximum working voltage.\u003cbr\u003e3.2\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e3.3\u0026gt;.Test output voltage by multimeter at output terminal and adjust '+' and ' - ' buttons to set output voltage to LED's maximum working voltage.\u003cbr\u003e3.4\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns.\u003cbr\u003e3.5\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e3.6\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require LED working current.\u003cbr\u003e3.7\u0026gt;.Connect LED and test.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6.Note:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Default output voltage is about 5V.\u003cbr\u003e2.It is a step down power supply module,So the output voltage must be lower than input voltage.Otherwise it will not working normally.\u003cbr\u003e3.Please press button ' - ' repeatedly if there is no output voltage.\u003cbr\u003e4.It is a DC power module,So it can not connect to AC power.\u003cbr\u003e5.Please don't short output.\u003cbr\u003e6.Input voltage must be 0.5V higher than output voltage.\u003cbr\u003e7.Please connect input before connect battery when use as charge and make sure output voltage is higher than battery voltage.It is recommended to serial a anti-backflow diode at input positive terminal.\u003cbr\u003e8.'IN-' and ‘OUT-' can not be connect together,otherwise module can not support constant current output.\u003cbr\u003e9.Please make sure input power is more than load power.\u003cbr\u003e10.Please step down output power if module is hot.\u003cbr\u003e11.The module's output voltage and current accuracy are 0.1V and 0.05A.\u003cbr\u003e12.Please read use manual and description before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7.Application:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Ordinary power supply;\u003cbr\u003e2.Battery charger;\u003cbr\u003e3.LED drive power;\u003cbr\u003e4.Instrument voltage display;\u003cbr\u003e5.Test meter;\u003cbr\u003e6.Circuit test;\u003cbr\u003e7.Power conversion.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1PC*DC-DC 5A CNC Step-down Module\u003cbr\u003e1PC*Shell\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H5ad2b60612bb478489a268788acb26e6M.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Hd124e1a6e1ec438387078541012b2a6er.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Ha5780c34dbf1414096b513d49ee81157Y.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/He5228a9f264442fe929fec6bb8a64185W.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H4ec195ebf02c4fa7ae252d6f2a642a51A.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H06bd932f2f8f4ca3854afc9b63768f7dJ.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H19a95ffb00b24b7887439209f2cecd0cj.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H13717b2c8e514f39bfb0728a92c6b03fl.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1yMJBXQ9E3KVjSZFGq6A19XXaz.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fnNzXL1H3KVjSZFHq6zKppXaf.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1kTJAXUGF3KVjSZFvq6z_nXXaQ.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H1b1ce425060940c580c345ab16725a4ez.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $5.80{"id":4521876848727,"title":"1.2-32V 5A Constant Voltage Current LCD Digital Voltage Current Display Adjustable Buck Step Down Power Supply Module With Case","handle":"1-2-32v-5a-constant-voltage-current-lcd-digital-voltage-current-display-adjustable-buck-step-down-power-supply-module-with-case","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eZK-J5X is a DC adjustable constant voltage constant current step down power supply module with LCD display.HD display input voltage and output voltage, current, power and display status.Adjustable stable output voltage and current.Set output current to meet the demand.It can be used as ordinary buck power supply module, charger and LED constant current driver.Simple and efficient, practical.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eHigh voltage resistant terminal;\u003cbr\u003eWith high quality acrylic shell;\u003cbr\u003eSupport complete disability output;\u003cbr\u003eSupport anti-reverse protection;\u003cbr\u003eSupport short circuit protection;\u003cbr\u003eSupport enable output;\u003cbr\u003eLCD screen HD display;\u003cbr\u003eSupport charging function;\u003cbr\u003eSupport select output;\u003cbr\u003eSupport display input voltage;\u003cbr\u003eSupport display output voltage, current, power;\u003cbr\u003eSupport working status indicator;\u003cbr\u003eMultiple parameters are displayed simultaneous;\u003cbr\u003eHigh current, low heat;\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eProduct Name: 5A Step Down Power Supply Module\u003cbr\u003e\u003cbr\u003eWorking Voltage:DC 6.5V-36V\u003cbr\u003eOutput Voltage:DC 1.2V-32V\u003cbr\u003eOutput Current:5A(4.5A need heat sink;3.5A is stable for long time)\u003cbr\u003eOutput Power:75W(75W need heat sink;50W is for 3.5A)\u003cbr\u003eVoltage Display Range:1.2~32V\u003cbr\u003eVoltage Display Precision:+\/-0.1V\u003cbr\u003eVoltage Display Resolution:0.05V\u003cbr\u003eCurrent Display Range:0~5A\u003cbr\u003eCurrent Display Precision:+\/-0.05A\u003cbr\u003eVoltage Display Resolution:0.005A\u003cbr\u003eConversion efficiency:About 94%\u003cbr\u003eWorking current:30mA\u003cbr\u003eSoft Starter:Yes(Failure at high power load)\u003cbr\u003eAnti-reverse Protection:Yes\u003cbr\u003eAnti-backflow Protection:No(It is recommended to connect a diode in series at the ‘OUT+')\u003cbr\u003eWorking Temperature range:-20°~85°\u003cbr\u003eWorking Humidity range:0%-95%RH\u003cbr\u003eSize with shell:70.5*48.4*30mm\u003cbr\u003eHeat Sink Size:20*14*6mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4.Button\/Potentiometer\/LED introduction:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1\u0026gt;.Long press means need keep press for more than 3second.\u003cbr\u003e2\u0026gt;.ON\/OFF:Short Press to select whether output voltage.Long press is used to restore default settings for next re-power.\u003cbr\u003e3\u0026gt;.IN\/OUT:Short Press to switch display input voltage or output voltage.Long press is used to switch display output current or output power.\u003cbr\u003e4\u0026gt;.'+' Button:It is used to regulate output voltage.Increase output voltage.Each time the button is pressed for short press,the output voltage is increased by 0.05V.Long press can continuously increase.Increase 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e5\u0026gt;.' - ' Button:It is used to regulate output voltage.Decrease output voltage.Each time the button is pressed for short press,the output voltage is decreased by 0.05V.Long press can continuously decrease.Decrease 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e6\u0026gt;.ADJ-I Potentiometer:Adjust output current.Increase the output current when rotating clockwise.Module enters constant current output state if load current reach the Set Current Value.Constant current Red LED indicator CC will turn ON.\u003cbr\u003e7\u0026gt;.ON LED:Green LED.Output indicator.It will turn ON when there is a output at output terminal.Otherwise it is OFF.\u003cbr\u003e8\u0026gt;.CC LED:Red LED.Constant current output indicator.It enters the constant current state when the load current reaches the set current and CC constant current indicator turns ON.\u003cbr\u003e9\u0026gt;.FULL LED:Green LED.Charged fully indicator.When battery is charged fully.It will turn ON.It will turn ON if output current is less than 0.2A when the Set Current is 2A.\u003cbr\u003e10\u0026gt;.CHAR LED:Charging indicator.It will turn ON when charging.\u003cbr\u003e\u003cbr\u003e5.Using Steps:\u003cbr\u003e\u003cbr\u003e1\u0026gt;.As a ordinary step down power module:\u003cbr\u003e1.1\u0026gt;.Connect right input voltage at input terminal;\u003cbr\u003e1.2\u0026gt;.Adjust '+' and ' - ' constant voltage buttons to set output voltage according to require.\u003cbr\u003e1.3\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e1.4\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e1.5\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require overcurrent protection value.\u003cbr\u003e1.6\u0026gt;.Test and using(E.g:Module's maximum output current is 2A if display 2A on multimeter.Then the maximum current can only be 2A when use this module.Red LED indicator will turn on if output reach to 2A.Otherwise LED is OFF.)\u003cbr\u003e1.7\u0026gt;.The output voltage will decrease due to the current sampling resistor at the output. The higher the current, the more the voltage is reduced.\u003cbr\u003e2\u0026gt;.As a charger:\u003cbr\u003e2.1\u0026gt;.Tops:Power module can not be used as charger module if it does not support constant current function.The voltage difference between the battery with insufficient voltage and the charger is very large.That causes excessive charging current even damage the battery.So it needs keep charging in constant current mode to reaching a certain level.Then automatically switch back to constant voltage charging.\u003cbr\u003e2.2\u0026gt;.Make sure floating charge voltage and charge current for battery.If the lithium battery's parameter is 3.7V\/2200mAh, then the float charge voltage is 4.2V, and the maximum charging current is 1C, which is 2200mA.\u003cbr\u003e2.3\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e2.4\u0026gt;.Test output voltage by multimeter and adjust '+' and ' - ' constant voltage buttons to make sure output voltage reach to require floating charge voltage.(If charge a 3.7V lithium battery, adjust the output voltage to 4.2V)\u003cbr\u003e2.5\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e2.6\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e2.7\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require charge current value.\u003cbr\u003e2.8\u0026gt;.Connect battery at output terminal and start to charging.\u003cbr\u003e3\u0026gt;.As a high power LED constant current driver:\u003cbr\u003e3.1\u0026gt;.Make sure LED's working current and maximum working voltage.\u003cbr\u003e3.2\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e3.3\u0026gt;.Test output voltage by multimeter at output terminal and adjust '+' and ' - ' buttons to set output voltage to LED's maximum working voltage.\u003cbr\u003e3.4\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns.\u003cbr\u003e3.5\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e3.6\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require LED working current.\u003cbr\u003e3.7\u0026gt;.Connect LED and test.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6.Note:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Default output voltage is about 5V.\u003cbr\u003e2.It is a step down power supply module,So the output voltage must be lower than input voltage.Otherwise it will not working normally.\u003cbr\u003e3.Please press button ' - ' repeatedly if there is no output voltage.\u003cbr\u003e4.It is a DC power module,So it can not connect to AC power.\u003cbr\u003e5.Please don't short output.\u003cbr\u003e6.Input voltage must be 0.5V higher than output voltage.\u003cbr\u003e7.Please connect input before connect battery when use as charge and make sure output voltage is higher than battery voltage.It is recommended to serial a anti-backflow diode at input positive terminal.\u003cbr\u003e8.'IN-' and ‘OUT-' can not be connect together,otherwise module can not support constant current output.\u003cbr\u003e9.Please make sure input power is more than load power.\u003cbr\u003e10.Please step down output power if module is hot.\u003cbr\u003e11.The module's output voltage and current accuracy are 0.1V and 0.05A.\u003cbr\u003e12.Please read use manual and description before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7.Application:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Ordinary power supply;\u003cbr\u003e2.Battery charger;\u003cbr\u003e3.LED drive power;\u003cbr\u003e4.Instrument voltage display;\u003cbr\u003e5.Test meter;\u003cbr\u003e6.Circuit test;\u003cbr\u003e7.Power conversion.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1PC*DC-DC 5A CNC Step-down Module\u003cbr\u003e1PC*Shell\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H5ad2b60612bb478489a268788acb26e6M.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Hd124e1a6e1ec438387078541012b2a6er.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Ha5780c34dbf1414096b513d49ee81157Y.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/He5228a9f264442fe929fec6bb8a64185W.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H4ec195ebf02c4fa7ae252d6f2a642a51A.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H06bd932f2f8f4ca3854afc9b63768f7dJ.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H19a95ffb00b24b7887439209f2cecd0cj.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H13717b2c8e514f39bfb0728a92c6b03fl.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1yMJBXQ9E3KVjSZFGq6A19XXaz.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fnNzXL1H3KVjSZFHq6zKppXaf.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1kTJAXUGF3KVjSZFvq6z_nXXaQ.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H1b1ce425060940c580c345ab16725a4ez.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-05-22T21:43:35+08:00","created_at":"2020-05-22T21:43:38+08:00","vendor":"DIYTECH","type":"Step Up\/Down Module","tags":["Display"],"price":474,"price_min":474,"price_max":474,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32030545117271,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DT2242","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"1.2-32V 5A Constant Voltage Current LCD Digital Voltage Current Display Adjustable Buck Step Down Power Supply Module With Case","public_title":null,"options":["Default Title"],"price":474,"weight":66,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_LYRik.jpg?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_m8KkK.jpg?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_Fnc78.jpg?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162829_666vZ.jpg?v=1590489807"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807","options":["Title"],"media":[{"alt":null,"id":6299818164311,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807","width":800},{"alt":null,"id":6299819507799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_LYRik.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_LYRik.jpg?v=1590489807","width":1000},{"alt":null,"id":6299821572183,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_m8KkK.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_m8KkK.jpg?v=1590489807","width":1000},{"alt":null,"id":6299821867095,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_Fnc78.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_Fnc78.jpg?v=1590489807","width":1000},{"alt":"1.2-32V 5A Constant Voltage Current Lcd Digital Display Adjustable Buck Step Down Power Supply","id":6276753293399,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162829_666vZ.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162829_666vZ.jpg?v=1590489807","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eZK-J5X is a DC adjustable constant voltage constant current step down power supply module with LCD display.HD display input voltage and output voltage, current, power and display status.Adjustable stable output voltage and current.Set output current to meet the demand.It can be used as ordinary buck power supply module, charger and LED constant current driver.Simple and efficient, practical.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eHigh voltage resistant terminal;\u003cbr\u003eWith high quality acrylic shell;\u003cbr\u003eSupport complete disability output;\u003cbr\u003eSupport anti-reverse protection;\u003cbr\u003eSupport short circuit protection;\u003cbr\u003eSupport enable output;\u003cbr\u003eLCD screen HD display;\u003cbr\u003eSupport charging function;\u003cbr\u003eSupport select output;\u003cbr\u003eSupport display input voltage;\u003cbr\u003eSupport display output voltage, current, power;\u003cbr\u003eSupport working status indicator;\u003cbr\u003eMultiple parameters are displayed simultaneous;\u003cbr\u003eHigh current, low heat;\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eProduct Name: 5A Step Down Power Supply Module\u003cbr\u003e\u003cbr\u003eWorking Voltage:DC 6.5V-36V\u003cbr\u003eOutput Voltage:DC 1.2V-32V\u003cbr\u003eOutput Current:5A(4.5A need heat sink;3.5A is stable for long time)\u003cbr\u003eOutput Power:75W(75W need heat sink;50W is for 3.5A)\u003cbr\u003eVoltage Display Range:1.2~32V\u003cbr\u003eVoltage Display Precision:+\/-0.1V\u003cbr\u003eVoltage Display Resolution:0.05V\u003cbr\u003eCurrent Display Range:0~5A\u003cbr\u003eCurrent Display Precision:+\/-0.05A\u003cbr\u003eVoltage Display Resolution:0.005A\u003cbr\u003eConversion efficiency:About 94%\u003cbr\u003eWorking current:30mA\u003cbr\u003eSoft Starter:Yes(Failure at high power load)\u003cbr\u003eAnti-reverse Protection:Yes\u003cbr\u003eAnti-backflow Protection:No(It is recommended to connect a diode in series at the ‘OUT+')\u003cbr\u003eWorking Temperature range:-20°~85°\u003cbr\u003eWorking Humidity range:0%-95%RH\u003cbr\u003eSize with shell:70.5*48.4*30mm\u003cbr\u003eHeat Sink Size:20*14*6mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4.Button\/Potentiometer\/LED introduction:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1\u0026gt;.Long press means need keep press for more than 3second.\u003cbr\u003e2\u0026gt;.ON\/OFF:Short Press to select whether output voltage.Long press is used to restore default settings for next re-power.\u003cbr\u003e3\u0026gt;.IN\/OUT:Short Press to switch display input voltage or output voltage.Long press is used to switch display output current or output power.\u003cbr\u003e4\u0026gt;.'+' Button:It is used to regulate output voltage.Increase output voltage.Each time the button is pressed for short press,the output voltage is increased by 0.05V.Long press can continuously increase.Increase 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e5\u0026gt;.' - ' Button:It is used to regulate output voltage.Decrease output voltage.Each time the button is pressed for short press,the output voltage is decreased by 0.05V.Long press can continuously decrease.Decrease 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e6\u0026gt;.ADJ-I Potentiometer:Adjust output current.Increase the output current when rotating clockwise.Module enters constant current output state if load current reach the Set Current Value.Constant current Red LED indicator CC will turn ON.\u003cbr\u003e7\u0026gt;.ON LED:Green LED.Output indicator.It will turn ON when there is a output at output terminal.Otherwise it is OFF.\u003cbr\u003e8\u0026gt;.CC LED:Red LED.Constant current output indicator.It enters the constant current state when the load current reaches the set current and CC constant current indicator turns ON.\u003cbr\u003e9\u0026gt;.FULL LED:Green LED.Charged fully indicator.When battery is charged fully.It will turn ON.It will turn ON if output current is less than 0.2A when the Set Current is 2A.\u003cbr\u003e10\u0026gt;.CHAR LED:Charging indicator.It will turn ON when charging.\u003cbr\u003e\u003cbr\u003e5.Using Steps:\u003cbr\u003e\u003cbr\u003e1\u0026gt;.As a ordinary step down power module:\u003cbr\u003e1.1\u0026gt;.Connect right input voltage at input terminal;\u003cbr\u003e1.2\u0026gt;.Adjust '+' and ' - ' constant voltage buttons to set output voltage according to require.\u003cbr\u003e1.3\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e1.4\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e1.5\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require overcurrent protection value.\u003cbr\u003e1.6\u0026gt;.Test and using(E.g:Module's maximum output current is 2A if display 2A on multimeter.Then the maximum current can only be 2A when use this module.Red LED indicator will turn on if output reach to 2A.Otherwise LED is OFF.)\u003cbr\u003e1.7\u0026gt;.The output voltage will decrease due to the current sampling resistor at the output. The higher the current, the more the voltage is reduced.\u003cbr\u003e2\u0026gt;.As a charger:\u003cbr\u003e2.1\u0026gt;.Tops:Power module can not be used as charger module if it does not support constant current function.The voltage difference between the battery with insufficient voltage and the charger is very large.That causes excessive charging current even damage the battery.So it needs keep charging in constant current mode to reaching a certain level.Then automatically switch back to constant voltage charging.\u003cbr\u003e2.2\u0026gt;.Make sure floating charge voltage and charge current for battery.If the lithium battery's parameter is 3.7V\/2200mAh, then the float charge voltage is 4.2V, and the maximum charging current is 1C, which is 2200mA.\u003cbr\u003e2.3\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e2.4\u0026gt;.Test output voltage by multimeter and adjust '+' and ' - ' constant voltage buttons to make sure output voltage reach to require floating charge voltage.(If charge a 3.7V lithium battery, adjust the output voltage to 4.2V)\u003cbr\u003e2.5\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e2.6\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e2.7\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require charge current value.\u003cbr\u003e2.8\u0026gt;.Connect battery at output terminal and start to charging.\u003cbr\u003e3\u0026gt;.As a high power LED constant current driver:\u003cbr\u003e3.1\u0026gt;.Make sure LED's working current and maximum working voltage.\u003cbr\u003e3.2\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e3.3\u0026gt;.Test output voltage by multimeter at output terminal and adjust '+' and ' - ' buttons to set output voltage to LED's maximum working voltage.\u003cbr\u003e3.4\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns.\u003cbr\u003e3.5\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e3.6\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require LED working current.\u003cbr\u003e3.7\u0026gt;.Connect LED and test.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6.Note:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Default output voltage is about 5V.\u003cbr\u003e2.It is a step down power supply module,So the output voltage must be lower than input voltage.Otherwise it will not working normally.\u003cbr\u003e3.Please press button ' - ' repeatedly if there is no output voltage.\u003cbr\u003e4.It is a DC power module,So it can not connect to AC power.\u003cbr\u003e5.Please don't short output.\u003cbr\u003e6.Input voltage must be 0.5V higher than output voltage.\u003cbr\u003e7.Please connect input before connect battery when use as charge and make sure output voltage is higher than battery voltage.It is recommended to serial a anti-backflow diode at input positive terminal.\u003cbr\u003e8.'IN-' and ‘OUT-' can not be connect together,otherwise module can not support constant current output.\u003cbr\u003e9.Please make sure input power is more than load power.\u003cbr\u003e10.Please step down output power if module is hot.\u003cbr\u003e11.The module's output voltage and current accuracy are 0.1V and 0.05A.\u003cbr\u003e12.Please read use manual and description before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7.Application:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Ordinary power supply;\u003cbr\u003e2.Battery charger;\u003cbr\u003e3.LED drive power;\u003cbr\u003e4.Instrument voltage display;\u003cbr\u003e5.Test meter;\u003cbr\u003e6.Circuit test;\u003cbr\u003e7.Power conversion.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1PC*DC-DC 5A CNC Step-down Module\u003cbr\u003e1PC*Shell\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H5ad2b60612bb478489a268788acb26e6M.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Hd124e1a6e1ec438387078541012b2a6er.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Ha5780c34dbf1414096b513d49ee81157Y.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/He5228a9f264442fe929fec6bb8a64185W.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H4ec195ebf02c4fa7ae252d6f2a642a51A.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H06bd932f2f8f4ca3854afc9b63768f7dJ.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H19a95ffb00b24b7887439209f2cecd0cj.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H13717b2c8e514f39bfb0728a92c6b03fl.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1yMJBXQ9E3KVjSZFGq6A19XXaz.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fnNzXL1H3KVjSZFHq6zKppXaf.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1kTJAXUGF3KVjSZFvq6z_nXXaQ.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H1b1ce425060940c580c345ab16725a4ez.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $3.80{"id":4521876848727,"title":"1.2-32V 5A Constant Voltage Current LCD Digital Voltage Current Display Adjustable Buck Step Down Power Supply Module With Case","handle":"1-2-32v-5a-constant-voltage-current-lcd-digital-voltage-current-display-adjustable-buck-step-down-power-supply-module-with-case","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eZK-J5X is a DC adjustable constant voltage constant current step down power supply module with LCD display.HD display input voltage and output voltage, current, power and display status.Adjustable stable output voltage and current.Set output current to meet the demand.It can be used as ordinary buck power supply module, charger and LED constant current driver.Simple and efficient, practical.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eHigh voltage resistant terminal;\u003cbr\u003eWith high quality acrylic shell;\u003cbr\u003eSupport complete disability output;\u003cbr\u003eSupport anti-reverse protection;\u003cbr\u003eSupport short circuit protection;\u003cbr\u003eSupport enable output;\u003cbr\u003eLCD screen HD display;\u003cbr\u003eSupport charging function;\u003cbr\u003eSupport select output;\u003cbr\u003eSupport display input voltage;\u003cbr\u003eSupport display output voltage, current, power;\u003cbr\u003eSupport working status indicator;\u003cbr\u003eMultiple parameters are displayed simultaneous;\u003cbr\u003eHigh current, low heat;\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eProduct Name: 5A Step Down Power Supply Module\u003cbr\u003e\u003cbr\u003eWorking Voltage:DC 6.5V-36V\u003cbr\u003eOutput Voltage:DC 1.2V-32V\u003cbr\u003eOutput Current:5A(4.5A need heat sink;3.5A is stable for long time)\u003cbr\u003eOutput Power:75W(75W need heat sink;50W is for 3.5A)\u003cbr\u003eVoltage Display Range:1.2~32V\u003cbr\u003eVoltage Display Precision:+\/-0.1V\u003cbr\u003eVoltage Display Resolution:0.05V\u003cbr\u003eCurrent Display Range:0~5A\u003cbr\u003eCurrent Display Precision:+\/-0.05A\u003cbr\u003eVoltage Display Resolution:0.005A\u003cbr\u003eConversion efficiency:About 94%\u003cbr\u003eWorking current:30mA\u003cbr\u003eSoft Starter:Yes(Failure at high power load)\u003cbr\u003eAnti-reverse Protection:Yes\u003cbr\u003eAnti-backflow Protection:No(It is recommended to connect a diode in series at the ‘OUT+')\u003cbr\u003eWorking Temperature range:-20°~85°\u003cbr\u003eWorking Humidity range:0%-95%RH\u003cbr\u003eSize with shell:70.5*48.4*30mm\u003cbr\u003eHeat Sink Size:20*14*6mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4.Button\/Potentiometer\/LED introduction:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1\u0026gt;.Long press means need keep press for more than 3second.\u003cbr\u003e2\u0026gt;.ON\/OFF:Short Press to select whether output voltage.Long press is used to restore default settings for next re-power.\u003cbr\u003e3\u0026gt;.IN\/OUT:Short Press to switch display input voltage or output voltage.Long press is used to switch display output current or output power.\u003cbr\u003e4\u0026gt;.'+' Button:It is used to regulate output voltage.Increase output voltage.Each time the button is pressed for short press,the output voltage is increased by 0.05V.Long press can continuously increase.Increase 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e5\u0026gt;.' - ' Button:It is used to regulate output voltage.Decrease output voltage.Each time the button is pressed for short press,the output voltage is decreased by 0.05V.Long press can continuously decrease.Decrease 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e6\u0026gt;.ADJ-I Potentiometer:Adjust output current.Increase the output current when rotating clockwise.Module enters constant current output state if load current reach the Set Current Value.Constant current Red LED indicator CC will turn ON.\u003cbr\u003e7\u0026gt;.ON LED:Green LED.Output indicator.It will turn ON when there is a output at output terminal.Otherwise it is OFF.\u003cbr\u003e8\u0026gt;.CC LED:Red LED.Constant current output indicator.It enters the constant current state when the load current reaches the set current and CC constant current indicator turns ON.\u003cbr\u003e9\u0026gt;.FULL LED:Green LED.Charged fully indicator.When battery is charged fully.It will turn ON.It will turn ON if output current is less than 0.2A when the Set Current is 2A.\u003cbr\u003e10\u0026gt;.CHAR LED:Charging indicator.It will turn ON when charging.\u003cbr\u003e\u003cbr\u003e5.Using Steps:\u003cbr\u003e\u003cbr\u003e1\u0026gt;.As a ordinary step down power module:\u003cbr\u003e1.1\u0026gt;.Connect right input voltage at input terminal;\u003cbr\u003e1.2\u0026gt;.Adjust '+' and ' - ' constant voltage buttons to set output voltage according to require.\u003cbr\u003e1.3\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e1.4\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e1.5\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require overcurrent protection value.\u003cbr\u003e1.6\u0026gt;.Test and using(E.g:Module's maximum output current is 2A if display 2A on multimeter.Then the maximum current can only be 2A when use this module.Red LED indicator will turn on if output reach to 2A.Otherwise LED is OFF.)\u003cbr\u003e1.7\u0026gt;.The output voltage will decrease due to the current sampling resistor at the output. The higher the current, the more the voltage is reduced.\u003cbr\u003e2\u0026gt;.As a charger:\u003cbr\u003e2.1\u0026gt;.Tops:Power module can not be used as charger module if it does not support constant current function.The voltage difference between the battery with insufficient voltage and the charger is very large.That causes excessive charging current even damage the battery.So it needs keep charging in constant current mode to reaching a certain level.Then automatically switch back to constant voltage charging.\u003cbr\u003e2.2\u0026gt;.Make sure floating charge voltage and charge current for battery.If the lithium battery's parameter is 3.7V\/2200mAh, then the float charge voltage is 4.2V, and the maximum charging current is 1C, which is 2200mA.\u003cbr\u003e2.3\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e2.4\u0026gt;.Test output voltage by multimeter and adjust '+' and ' - ' constant voltage buttons to make sure output voltage reach to require floating charge voltage.(If charge a 3.7V lithium battery, adjust the output voltage to 4.2V)\u003cbr\u003e2.5\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e2.6\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e2.7\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require charge current value.\u003cbr\u003e2.8\u0026gt;.Connect battery at output terminal and start to charging.\u003cbr\u003e3\u0026gt;.As a high power LED constant current driver:\u003cbr\u003e3.1\u0026gt;.Make sure LED's working current and maximum working voltage.\u003cbr\u003e3.2\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e3.3\u0026gt;.Test output voltage by multimeter at output terminal and adjust '+' and ' - ' buttons to set output voltage to LED's maximum working voltage.\u003cbr\u003e3.4\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns.\u003cbr\u003e3.5\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e3.6\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require LED working current.\u003cbr\u003e3.7\u0026gt;.Connect LED and test.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6.Note:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Default output voltage is about 5V.\u003cbr\u003e2.It is a step down power supply module,So the output voltage must be lower than input voltage.Otherwise it will not working normally.\u003cbr\u003e3.Please press button ' - ' repeatedly if there is no output voltage.\u003cbr\u003e4.It is a DC power module,So it can not connect to AC power.\u003cbr\u003e5.Please don't short output.\u003cbr\u003e6.Input voltage must be 0.5V higher than output voltage.\u003cbr\u003e7.Please connect input before connect battery when use as charge and make sure output voltage is higher than battery voltage.It is recommended to serial a anti-backflow diode at input positive terminal.\u003cbr\u003e8.'IN-' and ‘OUT-' can not be connect together,otherwise module can not support constant current output.\u003cbr\u003e9.Please make sure input power is more than load power.\u003cbr\u003e10.Please step down output power if module is hot.\u003cbr\u003e11.The module's output voltage and current accuracy are 0.1V and 0.05A.\u003cbr\u003e12.Please read use manual and description before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7.Application:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Ordinary power supply;\u003cbr\u003e2.Battery charger;\u003cbr\u003e3.LED drive power;\u003cbr\u003e4.Instrument voltage display;\u003cbr\u003e5.Test meter;\u003cbr\u003e6.Circuit test;\u003cbr\u003e7.Power conversion.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1PC*DC-DC 5A CNC Step-down Module\u003cbr\u003e1PC*Shell\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H5ad2b60612bb478489a268788acb26e6M.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Hd124e1a6e1ec438387078541012b2a6er.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Ha5780c34dbf1414096b513d49ee81157Y.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/He5228a9f264442fe929fec6bb8a64185W.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H4ec195ebf02c4fa7ae252d6f2a642a51A.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H06bd932f2f8f4ca3854afc9b63768f7dJ.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H19a95ffb00b24b7887439209f2cecd0cj.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H13717b2c8e514f39bfb0728a92c6b03fl.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1yMJBXQ9E3KVjSZFGq6A19XXaz.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fnNzXL1H3KVjSZFHq6zKppXaf.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1kTJAXUGF3KVjSZFvq6z_nXXaQ.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H1b1ce425060940c580c345ab16725a4ez.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-05-22T21:43:35+08:00","created_at":"2020-05-22T21:43:38+08:00","vendor":"DIYTECH","type":"Step Up\/Down Module","tags":["Display"],"price":474,"price_min":474,"price_max":474,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32030545117271,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DT2242","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"1.2-32V 5A Constant Voltage Current LCD Digital Voltage Current Display Adjustable Buck Step Down Power Supply Module With Case","public_title":null,"options":["Default Title"],"price":474,"weight":66,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_LYRik.jpg?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_m8KkK.jpg?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_Fnc78.jpg?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162829_666vZ.jpg?v=1590489807"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807","options":["Title"],"media":[{"alt":null,"id":6299818164311,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807","width":800},{"alt":null,"id":6299819507799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_LYRik.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_LYRik.jpg?v=1590489807","width":1000},{"alt":null,"id":6299821572183,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_m8KkK.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_m8KkK.jpg?v=1590489807","width":1000},{"alt":null,"id":6299821867095,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_Fnc78.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_Fnc78.jpg?v=1590489807","width":1000},{"alt":"1.2-32V 5A Constant Voltage Current Lcd Digital Display Adjustable Buck Step Down Power Supply","id":6276753293399,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162829_666vZ.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162829_666vZ.jpg?v=1590489807","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eZK-J5X is a DC adjustable constant voltage constant current step down power supply module with LCD display.HD display input voltage and output voltage, current, power and display status.Adjustable stable output voltage and current.Set output current to meet the demand.It can be used as ordinary buck power supply module, charger and LED constant current driver.Simple and efficient, practical.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eHigh voltage resistant terminal;\u003cbr\u003eWith high quality acrylic shell;\u003cbr\u003eSupport complete disability output;\u003cbr\u003eSupport anti-reverse protection;\u003cbr\u003eSupport short circuit protection;\u003cbr\u003eSupport enable output;\u003cbr\u003eLCD screen HD display;\u003cbr\u003eSupport charging function;\u003cbr\u003eSupport select output;\u003cbr\u003eSupport display input voltage;\u003cbr\u003eSupport display output voltage, current, power;\u003cbr\u003eSupport working status indicator;\u003cbr\u003eMultiple parameters are displayed simultaneous;\u003cbr\u003eHigh current, low heat;\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eProduct Name: 5A Step Down Power Supply Module\u003cbr\u003e\u003cbr\u003eWorking Voltage:DC 6.5V-36V\u003cbr\u003eOutput Voltage:DC 1.2V-32V\u003cbr\u003eOutput Current:5A(4.5A need heat sink;3.5A is stable for long time)\u003cbr\u003eOutput Power:75W(75W need heat sink;50W is for 3.5A)\u003cbr\u003eVoltage Display Range:1.2~32V\u003cbr\u003eVoltage Display Precision:+\/-0.1V\u003cbr\u003eVoltage Display Resolution:0.05V\u003cbr\u003eCurrent Display Range:0~5A\u003cbr\u003eCurrent Display Precision:+\/-0.05A\u003cbr\u003eVoltage Display Resolution:0.005A\u003cbr\u003eConversion efficiency:About 94%\u003cbr\u003eWorking current:30mA\u003cbr\u003eSoft Starter:Yes(Failure at high power load)\u003cbr\u003eAnti-reverse Protection:Yes\u003cbr\u003eAnti-backflow Protection:No(It is recommended to connect a diode in series at the ‘OUT+')\u003cbr\u003eWorking Temperature range:-20°~85°\u003cbr\u003eWorking Humidity range:0%-95%RH\u003cbr\u003eSize with shell:70.5*48.4*30mm\u003cbr\u003eHeat Sink Size:20*14*6mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4.Button\/Potentiometer\/LED introduction:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1\u0026gt;.Long press means need keep press for more than 3second.\u003cbr\u003e2\u0026gt;.ON\/OFF:Short Press to select whether output voltage.Long press is used to restore default settings for next re-power.\u003cbr\u003e3\u0026gt;.IN\/OUT:Short Press to switch display input voltage or output voltage.Long press is used to switch display output current or output power.\u003cbr\u003e4\u0026gt;.'+' Button:It is used to regulate output voltage.Increase output voltage.Each time the button is pressed for short press,the output voltage is increased by 0.05V.Long press can continuously increase.Increase 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e5\u0026gt;.' - ' Button:It is used to regulate output voltage.Decrease output voltage.Each time the button is pressed for short press,the output voltage is decreased by 0.05V.Long press can continuously decrease.Decrease 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e6\u0026gt;.ADJ-I Potentiometer:Adjust output current.Increase the output current when rotating clockwise.Module enters constant current output state if load current reach the Set Current Value.Constant current Red LED indicator CC will turn ON.\u003cbr\u003e7\u0026gt;.ON LED:Green LED.Output indicator.It will turn ON when there is a output at output terminal.Otherwise it is OFF.\u003cbr\u003e8\u0026gt;.CC LED:Red LED.Constant current output indicator.It enters the constant current state when the load current reaches the set current and CC constant current indicator turns ON.\u003cbr\u003e9\u0026gt;.FULL LED:Green LED.Charged fully indicator.When battery is charged fully.It will turn ON.It will turn ON if output current is less than 0.2A when the Set Current is 2A.\u003cbr\u003e10\u0026gt;.CHAR LED:Charging indicator.It will turn ON when charging.\u003cbr\u003e\u003cbr\u003e5.Using Steps:\u003cbr\u003e\u003cbr\u003e1\u0026gt;.As a ordinary step down power module:\u003cbr\u003e1.1\u0026gt;.Connect right input voltage at input terminal;\u003cbr\u003e1.2\u0026gt;.Adjust '+' and ' - ' constant voltage buttons to set output voltage according to require.\u003cbr\u003e1.3\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e1.4\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e1.5\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require overcurrent protection value.\u003cbr\u003e1.6\u0026gt;.Test and using(E.g:Module's maximum output current is 2A if display 2A on multimeter.Then the maximum current can only be 2A when use this module.Red LED indicator will turn on if output reach to 2A.Otherwise LED is OFF.)\u003cbr\u003e1.7\u0026gt;.The output voltage will decrease due to the current sampling resistor at the output. The higher the current, the more the voltage is reduced.\u003cbr\u003e2\u0026gt;.As a charger:\u003cbr\u003e2.1\u0026gt;.Tops:Power module can not be used as charger module if it does not support constant current function.The voltage difference between the battery with insufficient voltage and the charger is very large.That causes excessive charging current even damage the battery.So it needs keep charging in constant current mode to reaching a certain level.Then automatically switch back to constant voltage charging.\u003cbr\u003e2.2\u0026gt;.Make sure floating charge voltage and charge current for battery.If the lithium battery's parameter is 3.7V\/2200mAh, then the float charge voltage is 4.2V, and the maximum charging current is 1C, which is 2200mA.\u003cbr\u003e2.3\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e2.4\u0026gt;.Test output voltage by multimeter and adjust '+' and ' - ' constant voltage buttons to make sure output voltage reach to require floating charge voltage.(If charge a 3.7V lithium battery, adjust the output voltage to 4.2V)\u003cbr\u003e2.5\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e2.6\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e2.7\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require charge current value.\u003cbr\u003e2.8\u0026gt;.Connect battery at output terminal and start to charging.\u003cbr\u003e3\u0026gt;.As a high power LED constant current driver:\u003cbr\u003e3.1\u0026gt;.Make sure LED's working current and maximum working voltage.\u003cbr\u003e3.2\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e3.3\u0026gt;.Test output voltage by multimeter at output terminal and adjust '+' and ' - ' buttons to set output voltage to LED's maximum working voltage.\u003cbr\u003e3.4\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns.\u003cbr\u003e3.5\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e3.6\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require LED working current.\u003cbr\u003e3.7\u0026gt;.Connect LED and test.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6.Note:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Default output voltage is about 5V.\u003cbr\u003e2.It is a step down power supply module,So the output voltage must be lower than input voltage.Otherwise it will not working normally.\u003cbr\u003e3.Please press button ' - ' repeatedly if there is no output voltage.\u003cbr\u003e4.It is a DC power module,So it can not connect to AC power.\u003cbr\u003e5.Please don't short output.\u003cbr\u003e6.Input voltage must be 0.5V higher than output voltage.\u003cbr\u003e7.Please connect input before connect battery when use as charge and make sure output voltage is higher than battery voltage.It is recommended to serial a anti-backflow diode at input positive terminal.\u003cbr\u003e8.'IN-' and ‘OUT-' can not be connect together,otherwise module can not support constant current output.\u003cbr\u003e9.Please make sure input power is more than load power.\u003cbr\u003e10.Please step down output power if module is hot.\u003cbr\u003e11.The module's output voltage and current accuracy are 0.1V and 0.05A.\u003cbr\u003e12.Please read use manual and description before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7.Application:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Ordinary power supply;\u003cbr\u003e2.Battery charger;\u003cbr\u003e3.LED drive power;\u003cbr\u003e4.Instrument voltage display;\u003cbr\u003e5.Test meter;\u003cbr\u003e6.Circuit test;\u003cbr\u003e7.Power conversion.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1PC*DC-DC 5A CNC Step-down Module\u003cbr\u003e1PC*Shell\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H5ad2b60612bb478489a268788acb26e6M.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Hd124e1a6e1ec438387078541012b2a6er.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Ha5780c34dbf1414096b513d49ee81157Y.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/He5228a9f264442fe929fec6bb8a64185W.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H4ec195ebf02c4fa7ae252d6f2a642a51A.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H06bd932f2f8f4ca3854afc9b63768f7dJ.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H19a95ffb00b24b7887439209f2cecd0cj.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H13717b2c8e514f39bfb0728a92c6b03fl.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1yMJBXQ9E3KVjSZFGq6A19XXaz.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fnNzXL1H3KVjSZFHq6zKppXaf.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1kTJAXUGF3KVjSZFvq6z_nXXaQ.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H1b1ce425060940c580c345ab16725a4ez.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $2.89{"id":4521876848727,"title":"1.2-32V 5A Constant Voltage Current LCD Digital Voltage Current Display Adjustable Buck Step Down Power Supply Module With Case","handle":"1-2-32v-5a-constant-voltage-current-lcd-digital-voltage-current-display-adjustable-buck-step-down-power-supply-module-with-case","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eZK-J5X is a DC adjustable constant voltage constant current step down power supply module with LCD display.HD display input voltage and output voltage, current, power and display status.Adjustable stable output voltage and current.Set output current to meet the demand.It can be used as ordinary buck power supply module, charger and LED constant current driver.Simple and efficient, practical.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eHigh voltage resistant terminal;\u003cbr\u003eWith high quality acrylic shell;\u003cbr\u003eSupport complete disability output;\u003cbr\u003eSupport anti-reverse protection;\u003cbr\u003eSupport short circuit protection;\u003cbr\u003eSupport enable output;\u003cbr\u003eLCD screen HD display;\u003cbr\u003eSupport charging function;\u003cbr\u003eSupport select output;\u003cbr\u003eSupport display input voltage;\u003cbr\u003eSupport display output voltage, current, power;\u003cbr\u003eSupport working status indicator;\u003cbr\u003eMultiple parameters are displayed simultaneous;\u003cbr\u003eHigh current, low heat;\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eProduct Name: 5A Step Down Power Supply Module\u003cbr\u003e\u003cbr\u003eWorking Voltage:DC 6.5V-36V\u003cbr\u003eOutput Voltage:DC 1.2V-32V\u003cbr\u003eOutput Current:5A(4.5A need heat sink;3.5A is stable for long time)\u003cbr\u003eOutput Power:75W(75W need heat sink;50W is for 3.5A)\u003cbr\u003eVoltage Display Range:1.2~32V\u003cbr\u003eVoltage Display Precision:+\/-0.1V\u003cbr\u003eVoltage Display Resolution:0.05V\u003cbr\u003eCurrent Display Range:0~5A\u003cbr\u003eCurrent Display Precision:+\/-0.05A\u003cbr\u003eVoltage Display Resolution:0.005A\u003cbr\u003eConversion efficiency:About 94%\u003cbr\u003eWorking current:30mA\u003cbr\u003eSoft Starter:Yes(Failure at high power load)\u003cbr\u003eAnti-reverse Protection:Yes\u003cbr\u003eAnti-backflow Protection:No(It is recommended to connect a diode in series at the ‘OUT+')\u003cbr\u003eWorking Temperature range:-20°~85°\u003cbr\u003eWorking Humidity range:0%-95%RH\u003cbr\u003eSize with shell:70.5*48.4*30mm\u003cbr\u003eHeat Sink Size:20*14*6mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4.Button\/Potentiometer\/LED introduction:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1\u0026gt;.Long press means need keep press for more than 3second.\u003cbr\u003e2\u0026gt;.ON\/OFF:Short Press to select whether output voltage.Long press is used to restore default settings for next re-power.\u003cbr\u003e3\u0026gt;.IN\/OUT:Short Press to switch display input voltage or output voltage.Long press is used to switch display output current or output power.\u003cbr\u003e4\u0026gt;.'+' Button:It is used to regulate output voltage.Increase output voltage.Each time the button is pressed for short press,the output voltage is increased by 0.05V.Long press can continuously increase.Increase 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e5\u0026gt;.' - ' Button:It is used to regulate output voltage.Decrease output voltage.Each time the button is pressed for short press,the output voltage is decreased by 0.05V.Long press can continuously decrease.Decrease 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e6\u0026gt;.ADJ-I Potentiometer:Adjust output current.Increase the output current when rotating clockwise.Module enters constant current output state if load current reach the Set Current Value.Constant current Red LED indicator CC will turn ON.\u003cbr\u003e7\u0026gt;.ON LED:Green LED.Output indicator.It will turn ON when there is a output at output terminal.Otherwise it is OFF.\u003cbr\u003e8\u0026gt;.CC LED:Red LED.Constant current output indicator.It enters the constant current state when the load current reaches the set current and CC constant current indicator turns ON.\u003cbr\u003e9\u0026gt;.FULL LED:Green LED.Charged fully indicator.When battery is charged fully.It will turn ON.It will turn ON if output current is less than 0.2A when the Set Current is 2A.\u003cbr\u003e10\u0026gt;.CHAR LED:Charging indicator.It will turn ON when charging.\u003cbr\u003e\u003cbr\u003e5.Using Steps:\u003cbr\u003e\u003cbr\u003e1\u0026gt;.As a ordinary step down power module:\u003cbr\u003e1.1\u0026gt;.Connect right input voltage at input terminal;\u003cbr\u003e1.2\u0026gt;.Adjust '+' and ' - ' constant voltage buttons to set output voltage according to require.\u003cbr\u003e1.3\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e1.4\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e1.5\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require overcurrent protection value.\u003cbr\u003e1.6\u0026gt;.Test and using(E.g:Module's maximum output current is 2A if display 2A on multimeter.Then the maximum current can only be 2A when use this module.Red LED indicator will turn on if output reach to 2A.Otherwise LED is OFF.)\u003cbr\u003e1.7\u0026gt;.The output voltage will decrease due to the current sampling resistor at the output. The higher the current, the more the voltage is reduced.\u003cbr\u003e2\u0026gt;.As a charger:\u003cbr\u003e2.1\u0026gt;.Tops:Power module can not be used as charger module if it does not support constant current function.The voltage difference between the battery with insufficient voltage and the charger is very large.That causes excessive charging current even damage the battery.So it needs keep charging in constant current mode to reaching a certain level.Then automatically switch back to constant voltage charging.\u003cbr\u003e2.2\u0026gt;.Make sure floating charge voltage and charge current for battery.If the lithium battery's parameter is 3.7V\/2200mAh, then the float charge voltage is 4.2V, and the maximum charging current is 1C, which is 2200mA.\u003cbr\u003e2.3\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e2.4\u0026gt;.Test output voltage by multimeter and adjust '+' and ' - ' constant voltage buttons to make sure output voltage reach to require floating charge voltage.(If charge a 3.7V lithium battery, adjust the output voltage to 4.2V)\u003cbr\u003e2.5\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e2.6\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e2.7\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require charge current value.\u003cbr\u003e2.8\u0026gt;.Connect battery at output terminal and start to charging.\u003cbr\u003e3\u0026gt;.As a high power LED constant current driver:\u003cbr\u003e3.1\u0026gt;.Make sure LED's working current and maximum working voltage.\u003cbr\u003e3.2\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e3.3\u0026gt;.Test output voltage by multimeter at output terminal and adjust '+' and ' - ' buttons to set output voltage to LED's maximum working voltage.\u003cbr\u003e3.4\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns.\u003cbr\u003e3.5\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e3.6\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require LED working current.\u003cbr\u003e3.7\u0026gt;.Connect LED and test.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6.Note:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Default output voltage is about 5V.\u003cbr\u003e2.It is a step down power supply module,So the output voltage must be lower than input voltage.Otherwise it will not working normally.\u003cbr\u003e3.Please press button ' - ' repeatedly if there is no output voltage.\u003cbr\u003e4.It is a DC power module,So it can not connect to AC power.\u003cbr\u003e5.Please don't short output.\u003cbr\u003e6.Input voltage must be 0.5V higher than output voltage.\u003cbr\u003e7.Please connect input before connect battery when use as charge and make sure output voltage is higher than battery voltage.It is recommended to serial a anti-backflow diode at input positive terminal.\u003cbr\u003e8.'IN-' and ‘OUT-' can not be connect together,otherwise module can not support constant current output.\u003cbr\u003e9.Please make sure input power is more than load power.\u003cbr\u003e10.Please step down output power if module is hot.\u003cbr\u003e11.The module's output voltage and current accuracy are 0.1V and 0.05A.\u003cbr\u003e12.Please read use manual and description before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7.Application:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Ordinary power supply;\u003cbr\u003e2.Battery charger;\u003cbr\u003e3.LED drive power;\u003cbr\u003e4.Instrument voltage display;\u003cbr\u003e5.Test meter;\u003cbr\u003e6.Circuit test;\u003cbr\u003e7.Power conversion.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1PC*DC-DC 5A CNC Step-down Module\u003cbr\u003e1PC*Shell\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H5ad2b60612bb478489a268788acb26e6M.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Hd124e1a6e1ec438387078541012b2a6er.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Ha5780c34dbf1414096b513d49ee81157Y.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/He5228a9f264442fe929fec6bb8a64185W.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H4ec195ebf02c4fa7ae252d6f2a642a51A.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H06bd932f2f8f4ca3854afc9b63768f7dJ.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H19a95ffb00b24b7887439209f2cecd0cj.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H13717b2c8e514f39bfb0728a92c6b03fl.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1yMJBXQ9E3KVjSZFGq6A19XXaz.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fnNzXL1H3KVjSZFHq6zKppXaf.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1kTJAXUGF3KVjSZFvq6z_nXXaQ.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H1b1ce425060940c580c345ab16725a4ez.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-05-22T21:43:35+08:00","created_at":"2020-05-22T21:43:38+08:00","vendor":"DIYTECH","type":"Step Up\/Down Module","tags":["Display"],"price":474,"price_min":474,"price_max":474,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32030545117271,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DT2242","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"1.2-32V 5A Constant Voltage Current LCD Digital Voltage Current Display Adjustable Buck Step Down Power Supply Module With Case","public_title":null,"options":["Default Title"],"price":474,"weight":66,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_LYRik.jpg?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_m8KkK.jpg?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_Fnc78.jpg?v=1590489807","\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162829_666vZ.jpg?v=1590489807"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807","options":["Title"],"media":[{"alt":null,"id":6299818164311,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/H1b1ce425060940c580c345ab16725a4ez.png?v=1590489807","width":800},{"alt":null,"id":6299819507799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_LYRik.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_LYRik.jpg?v=1590489807","width":1000},{"alt":null,"id":6299821572183,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_m8KkK.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_m8KkK.jpg?v=1590489807","width":1000},{"alt":null,"id":6299821867095,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_Fnc78.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162830_Fnc78.jpg?v=1590489807","width":1000},{"alt":"1.2-32V 5A Constant Voltage Current Lcd Digital Display Adjustable Buck Step Down Power Supply","id":6276753293399,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162829_666vZ.jpg?v=1590489807"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/diymore_20190919162829_666vZ.jpg?v=1590489807","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eZK-J5X is a DC adjustable constant voltage constant current step down power supply module with LCD display.HD display input voltage and output voltage, current, power and display status.Adjustable stable output voltage and current.Set output current to meet the demand.It can be used as ordinary buck power supply module, charger and LED constant current driver.Simple and efficient, practical.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eHigh voltage resistant terminal;\u003cbr\u003eWith high quality acrylic shell;\u003cbr\u003eSupport complete disability output;\u003cbr\u003eSupport anti-reverse protection;\u003cbr\u003eSupport short circuit protection;\u003cbr\u003eSupport enable output;\u003cbr\u003eLCD screen HD display;\u003cbr\u003eSupport charging function;\u003cbr\u003eSupport select output;\u003cbr\u003eSupport display input voltage;\u003cbr\u003eSupport display output voltage, current, power;\u003cbr\u003eSupport working status indicator;\u003cbr\u003eMultiple parameters are displayed simultaneous;\u003cbr\u003eHigh current, low heat;\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eProduct Name: 5A Step Down Power Supply Module\u003cbr\u003e\u003cbr\u003eWorking Voltage:DC 6.5V-36V\u003cbr\u003eOutput Voltage:DC 1.2V-32V\u003cbr\u003eOutput Current:5A(4.5A need heat sink;3.5A is stable for long time)\u003cbr\u003eOutput Power:75W(75W need heat sink;50W is for 3.5A)\u003cbr\u003eVoltage Display Range:1.2~32V\u003cbr\u003eVoltage Display Precision:+\/-0.1V\u003cbr\u003eVoltage Display Resolution:0.05V\u003cbr\u003eCurrent Display Range:0~5A\u003cbr\u003eCurrent Display Precision:+\/-0.05A\u003cbr\u003eVoltage Display Resolution:0.005A\u003cbr\u003eConversion efficiency:About 94%\u003cbr\u003eWorking current:30mA\u003cbr\u003eSoft Starter:Yes(Failure at high power load)\u003cbr\u003eAnti-reverse Protection:Yes\u003cbr\u003eAnti-backflow Protection:No(It is recommended to connect a diode in series at the ‘OUT+')\u003cbr\u003eWorking Temperature range:-20°~85°\u003cbr\u003eWorking Humidity range:0%-95%RH\u003cbr\u003eSize with shell:70.5*48.4*30mm\u003cbr\u003eHeat Sink Size:20*14*6mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4.Button\/Potentiometer\/LED introduction:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1\u0026gt;.Long press means need keep press for more than 3second.\u003cbr\u003e2\u0026gt;.ON\/OFF:Short Press to select whether output voltage.Long press is used to restore default settings for next re-power.\u003cbr\u003e3\u0026gt;.IN\/OUT:Short Press to switch display input voltage or output voltage.Long press is used to switch display output current or output power.\u003cbr\u003e4\u0026gt;.'+' Button:It is used to regulate output voltage.Increase output voltage.Each time the button is pressed for short press,the output voltage is increased by 0.05V.Long press can continuously increase.Increase 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e5\u0026gt;.' - ' Button:It is used to regulate output voltage.Decrease output voltage.Each time the button is pressed for short press,the output voltage is decreased by 0.05V.Long press can continuously decrease.Decrease 0.1V, 1V in continuous if keep long press again.\u003cbr\u003e6\u0026gt;.ADJ-I Potentiometer:Adjust output current.Increase the output current when rotating clockwise.Module enters constant current output state if load current reach the Set Current Value.Constant current Red LED indicator CC will turn ON.\u003cbr\u003e7\u0026gt;.ON LED:Green LED.Output indicator.It will turn ON when there is a output at output terminal.Otherwise it is OFF.\u003cbr\u003e8\u0026gt;.CC LED:Red LED.Constant current output indicator.It enters the constant current state when the load current reaches the set current and CC constant current indicator turns ON.\u003cbr\u003e9\u0026gt;.FULL LED:Green LED.Charged fully indicator.When battery is charged fully.It will turn ON.It will turn ON if output current is less than 0.2A when the Set Current is 2A.\u003cbr\u003e10\u0026gt;.CHAR LED:Charging indicator.It will turn ON when charging.\u003cbr\u003e\u003cbr\u003e5.Using Steps:\u003cbr\u003e\u003cbr\u003e1\u0026gt;.As a ordinary step down power module:\u003cbr\u003e1.1\u0026gt;.Connect right input voltage at input terminal;\u003cbr\u003e1.2\u0026gt;.Adjust '+' and ' - ' constant voltage buttons to set output voltage according to require.\u003cbr\u003e1.3\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e1.4\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e1.5\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require overcurrent protection value.\u003cbr\u003e1.6\u0026gt;.Test and using(E.g:Module's maximum output current is 2A if display 2A on multimeter.Then the maximum current can only be 2A when use this module.Red LED indicator will turn on if output reach to 2A.Otherwise LED is OFF.)\u003cbr\u003e1.7\u0026gt;.The output voltage will decrease due to the current sampling resistor at the output. The higher the current, the more the voltage is reduced.\u003cbr\u003e2\u0026gt;.As a charger:\u003cbr\u003e2.1\u0026gt;.Tops:Power module can not be used as charger module if it does not support constant current function.The voltage difference between the battery with insufficient voltage and the charger is very large.That causes excessive charging current even damage the battery.So it needs keep charging in constant current mode to reaching a certain level.Then automatically switch back to constant voltage charging.\u003cbr\u003e2.2\u0026gt;.Make sure floating charge voltage and charge current for battery.If the lithium battery's parameter is 3.7V\/2200mAh, then the float charge voltage is 4.2V, and the maximum charging current is 1C, which is 2200mA.\u003cbr\u003e2.3\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e2.4\u0026gt;.Test output voltage by multimeter and adjust '+' and ' - ' constant voltage buttons to make sure output voltage reach to require floating charge voltage.(If charge a 3.7V lithium battery, adjust the output voltage to 4.2V)\u003cbr\u003e2.5\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns at first.\u003cbr\u003e2.6\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e2.7\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require charge current value.\u003cbr\u003e2.8\u0026gt;.Connect battery at output terminal and start to charging.\u003cbr\u003e3\u0026gt;.As a high power LED constant current driver:\u003cbr\u003e3.1\u0026gt;.Make sure LED's working current and maximum working voltage.\u003cbr\u003e3.2\u0026gt;.Connect right input voltage at input terminal.(Note:Please don't connect load during set parameter).\u003cbr\u003e3.3\u0026gt;.Test output voltage by multimeter at output terminal and adjust '+' and ' - ' buttons to set output voltage to LED's maximum working voltage.\u003cbr\u003e3.4\u0026gt;.Rotate ADJ-I potentiometer counterclockwise more than 10 turns.\u003cbr\u003e3.5\u0026gt;.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)\u003cbr\u003e3.6\u0026gt;.Rotate ADJ-I constant current potentiometer clockwise to set output current according to require LED working current.\u003cbr\u003e3.7\u0026gt;.Connect LED and test.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6.Note:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Default output voltage is about 5V.\u003cbr\u003e2.It is a step down power supply module,So the output voltage must be lower than input voltage.Otherwise it will not working normally.\u003cbr\u003e3.Please press button ' - ' repeatedly if there is no output voltage.\u003cbr\u003e4.It is a DC power module,So it can not connect to AC power.\u003cbr\u003e5.Please don't short output.\u003cbr\u003e6.Input voltage must be 0.5V higher than output voltage.\u003cbr\u003e7.Please connect input before connect battery when use as charge and make sure output voltage is higher than battery voltage.It is recommended to serial a anti-backflow diode at input positive terminal.\u003cbr\u003e8.'IN-' and ‘OUT-' can not be connect together,otherwise module can not support constant current output.\u003cbr\u003e9.Please make sure input power is more than load power.\u003cbr\u003e10.Please step down output power if module is hot.\u003cbr\u003e11.The module's output voltage and current accuracy are 0.1V and 0.05A.\u003cbr\u003e12.Please read use manual and description before use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7.Application:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1.Ordinary power supply;\u003cbr\u003e2.Battery charger;\u003cbr\u003e3.LED drive power;\u003cbr\u003e4.Instrument voltage display;\u003cbr\u003e5.Test meter;\u003cbr\u003e6.Circuit test;\u003cbr\u003e7.Power conversion.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1PC*DC-DC 5A CNC Step-down Module\u003cbr\u003e1PC*Shell\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H5ad2b60612bb478489a268788acb26e6M.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Hd124e1a6e1ec438387078541012b2a6er.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Ha5780c34dbf1414096b513d49ee81157Y.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/He5228a9f264442fe929fec6bb8a64185W.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H4ec195ebf02c4fa7ae252d6f2a642a51A.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H06bd932f2f8f4ca3854afc9b63768f7dJ.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H19a95ffb00b24b7887439209f2cecd0cj.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H13717b2c8e514f39bfb0728a92c6b03fl.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1yMJBXQ9E3KVjSZFGq6A19XXaz.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1fnNzXL1H3KVjSZFHq6zKppXaf.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1kTJAXUGF3KVjSZFvq6z_nXXaQ.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H1b1ce425060940c580c345ab16725a4ez.jpg\" class=\"detail-desc-decorate-image\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
