XH-M609 DC12-36V Voltage Protection Module Solar Lithium Car Battery Undervoltage
XH-M609 DC12-36V Voltage Protection Module Solar Lithium Car Battery Undervoltage
brand: DIYTECH SKU:DT2528
Regular price
$3.79
![]()
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancyservice@diytech.cc
Parameter:
Product name: Battery over-discharge protection module
Product model: HCW-M635
Power supply voltage: DC12-36V
Output voltage: equal to the supply voltage
Control accuracy: 0.1V
Power consumption: <1.5W
Use range: various storage batteries / lithium batteries
Net weight: 28g
Product size: 57 x 42 x 19mm
Set to stop below 12.5V and start above 14V:
Set the protection value: press "+ 一次 once to display the protection value, double-click" + 〃 ", the decimal point flashes, and then press" +,-"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.
Set the hysteresis value: press "-〃 once to display the hysteresis value, double-click" -〃, the decimal point will flash, and press "+,-" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.
Set to stop below 10V and start above 15.5V:
Set the protection value: press "+ 一次 once to display the protection value, double-click" + 〃 ", the decimal point flashes, and then press" +,-"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.
Set the hysteresis value: press "-〃 once to display the hysteresis value, double-click" -〃, the decimal point will flash, and press "+,-" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.
Reset:
When the power is off, press and hold both buttons at the same time, and then power on. At this time, "888" is displayed on the screen to indicate that the factory reset is successful.
Factory set protection value: 12V, return difference: 2V
Scope of application:
Suitable for all electric two-wheel tricycle batteries in the applicable voltage range;
Car battery and new energy electric vehicle battery discharge protection;
Over-discharge protection of various batteries;
Solar, wind and other power supply systems.
Instructions:
When the new battery is used for the first time, the rated voltage value is close to the actual value, and the stop discharge voltage can be judged. A reasonable discharge voltage value can be obtained according to the normal voltage calculation method of the battery.
When the old battery is used, the actual voltage value and the rated voltage value are quite different. You need to measure the termination voltage value in actual use yourself.
Slow charging is usually used for battery charging (in the case of fast charging, the voltage and current are relatively large, but the battery is easily damaged.) The slow charging voltage is 1.2 times the rated voltage, and the charging current is adjusted to about 2/10 of the rated capacity current of the battery. For example, the charging voltage of a 6V50Ah battery is about 7.2 volts, and the charging current is adjusted to 10A.
Reference formula: charging voltage = rated voltage X1.2, charging current = rated current X0.2
Package includes:
1 x Battery over-discharge protection module
Other Customers also buy:
-
Translation missing: en.products.product.regular_price $0.06{"id":4619673239639,"title":"XH-M609 DC12-36V Voltage Protection Module Solar Lithium Car Battery Undervoltage","handle":"xh-m609-dc12-36v-voltage-protection-module-solar-lithium-car-battery-undervoltage","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eParameter:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct name: Battery over-discharge protection module\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct model: HCW-M635\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower supply voltage: DC12-36V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOutput voltage: equal to the supply voltage\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eControl accuracy: 0.1V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower consumption: \u0026lt;1.5W\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUse range: various storage batteries \/ lithium batteries\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight: 28g\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct size: 57 x 42 x 19mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 12.5V and start above 14V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 10V and start above 15.5V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReset:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the power is off, press and hold both buttons at the same time, and then power on. At this time, \"888\" is displayed on the screen to indicate that the factory reset is successful.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFactory set protection value: 12V, return difference: 2V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eScope of application:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSuitable for all electric two-wheel tricycle batteries in the applicable voltage range;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCar battery and new energy electric vehicle battery discharge protection;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOver-discharge protection of various batteries;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSolar, wind and other power supply systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the new battery is used for the first time, the rated voltage value is close to the actual value, and the stop discharge voltage can be judged. A reasonable discharge voltage value can be obtained according to the normal voltage calculation method of the battery.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the old battery is used, the actual voltage value and the rated voltage value are quite different. You need to measure the termination voltage value in actual use yourself.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSlow charging is usually used for battery charging (in the case of fast charging, the voltage and current are relatively large, but the battery is easily damaged.) The slow charging voltage is 1.2 times the rated voltage, and the charging current is adjusted to about 2\/10 of the rated capacity current of the battery. For example, the charging voltage of a 6V50Ah battery is about 7.2 volts, and the charging current is adjusted to 10A.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eReference formula: charging voltage = rated voltage X1.2, charging current = rated current X0.2\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage includes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e1 x Battery over-discharge protection module\u003c\/p\u003e","published_at":"2020-09-19T17:03:17+08:00","created_at":"2020-09-19T17:03:16+08:00","vendor":"DIYTECH","type":"Battery protection board","tags":[],"price":379,"price_min":379,"price_max":379,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32351398723671,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DT2528","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"XH-M609 DC12-36V Voltage Protection Module Solar Lithium Car Battery Undervoltage","public_title":null,"options":["Default Title"],"price":379,"weight":30,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197","\/\/diytech.cc\/cdn\/shop\/products\/Hbc52e3cd29d543ba9841993f276dcb6aD.jpg?v=1600506198","\/\/diytech.cc\/cdn\/shop\/products\/XH-M609-12-36V-Battery-Low-Voltage-Disconnect-Protection-Module-DC-Output.jpg?v=1600506198","\/\/diytech.cc\/cdn\/shop\/products\/H08caddf454084467a08823b89ee1044bs.jpg?v=1600506198"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197","options":["Title"],"media":[{"alt":null,"id":6758872940631,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1360,"width":1360,"src":"\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197"},"aspect_ratio":1.0,"height":1360,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197","width":1360},{"alt":null,"id":6758872973399,"position":2,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/diytech.cc\/cdn\/shop\/products\/Hbc52e3cd29d543ba9841993f276dcb6aD.jpg?v=1600506198"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/Hbc52e3cd29d543ba9841993f276dcb6aD.jpg?v=1600506198","width":750},{"alt":null,"id":6758873006167,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1360,"width":1360,"src":"\/\/diytech.cc\/cdn\/shop\/products\/XH-M609-12-36V-Battery-Low-Voltage-Disconnect-Protection-Module-DC-Output.jpg?v=1600506198"},"aspect_ratio":1.0,"height":1360,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/XH-M609-12-36V-Battery-Low-Voltage-Disconnect-Protection-Module-DC-Output.jpg?v=1600506198","width":1360},{"alt":null,"id":6758873038935,"position":4,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/diytech.cc\/cdn\/shop\/products\/H08caddf454084467a08823b89ee1044bs.jpg?v=1600506198"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/H08caddf454084467a08823b89ee1044bs.jpg?v=1600506198","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eParameter:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct name: Battery over-discharge protection module\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct model: HCW-M635\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower supply voltage: DC12-36V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOutput voltage: equal to the supply voltage\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eControl accuracy: 0.1V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower consumption: \u0026lt;1.5W\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUse range: various storage batteries \/ lithium batteries\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight: 28g\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct size: 57 x 42 x 19mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 12.5V and start above 14V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 10V and start above 15.5V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReset:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the power is off, press and hold both buttons at the same time, and then power on. At this time, \"888\" is displayed on the screen to indicate that the factory reset is successful.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFactory set protection value: 12V, return difference: 2V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eScope of application:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSuitable for all electric two-wheel tricycle batteries in the applicable voltage range;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCar battery and new energy electric vehicle battery discharge protection;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOver-discharge protection of various batteries;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSolar, wind and other power supply systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the new battery is used for the first time, the rated voltage value is close to the actual value, and the stop discharge voltage can be judged. A reasonable discharge voltage value can be obtained according to the normal voltage calculation method of the battery.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the old battery is used, the actual voltage value and the rated voltage value are quite different. You need to measure the termination voltage value in actual use yourself.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSlow charging is usually used for battery charging (in the case of fast charging, the voltage and current are relatively large, but the battery is easily damaged.) The slow charging voltage is 1.2 times the rated voltage, and the charging current is adjusted to about 2\/10 of the rated capacity current of the battery. For example, the charging voltage of a 6V50Ah battery is about 7.2 volts, and the charging current is adjusted to 10A.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eReference formula: charging voltage = rated voltage X1.2, charging current = rated current X0.2\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage includes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e1 x Battery over-discharge protection module\u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $0.06{"id":4619673239639,"title":"XH-M609 DC12-36V Voltage Protection Module Solar Lithium Car Battery Undervoltage","handle":"xh-m609-dc12-36v-voltage-protection-module-solar-lithium-car-battery-undervoltage","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eParameter:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct name: Battery over-discharge protection module\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct model: HCW-M635\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower supply voltage: DC12-36V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOutput voltage: equal to the supply voltage\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eControl accuracy: 0.1V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower consumption: \u0026lt;1.5W\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUse range: various storage batteries \/ lithium batteries\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight: 28g\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct size: 57 x 42 x 19mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 12.5V and start above 14V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 10V and start above 15.5V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReset:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the power is off, press and hold both buttons at the same time, and then power on. At this time, \"888\" is displayed on the screen to indicate that the factory reset is successful.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFactory set protection value: 12V, return difference: 2V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eScope of application:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSuitable for all electric two-wheel tricycle batteries in the applicable voltage range;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCar battery and new energy electric vehicle battery discharge protection;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOver-discharge protection of various batteries;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSolar, wind and other power supply systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the new battery is used for the first time, the rated voltage value is close to the actual value, and the stop discharge voltage can be judged. A reasonable discharge voltage value can be obtained according to the normal voltage calculation method of the battery.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the old battery is used, the actual voltage value and the rated voltage value are quite different. You need to measure the termination voltage value in actual use yourself.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSlow charging is usually used for battery charging (in the case of fast charging, the voltage and current are relatively large, but the battery is easily damaged.) The slow charging voltage is 1.2 times the rated voltage, and the charging current is adjusted to about 2\/10 of the rated capacity current of the battery. For example, the charging voltage of a 6V50Ah battery is about 7.2 volts, and the charging current is adjusted to 10A.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eReference formula: charging voltage = rated voltage X1.2, charging current = rated current X0.2\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage includes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e1 x Battery over-discharge protection module\u003c\/p\u003e","published_at":"2020-09-19T17:03:17+08:00","created_at":"2020-09-19T17:03:16+08:00","vendor":"DIYTECH","type":"Battery protection board","tags":[],"price":379,"price_min":379,"price_max":379,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32351398723671,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DT2528","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"XH-M609 DC12-36V Voltage Protection Module Solar Lithium Car Battery Undervoltage","public_title":null,"options":["Default Title"],"price":379,"weight":30,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197","\/\/diytech.cc\/cdn\/shop\/products\/Hbc52e3cd29d543ba9841993f276dcb6aD.jpg?v=1600506198","\/\/diytech.cc\/cdn\/shop\/products\/XH-M609-12-36V-Battery-Low-Voltage-Disconnect-Protection-Module-DC-Output.jpg?v=1600506198","\/\/diytech.cc\/cdn\/shop\/products\/H08caddf454084467a08823b89ee1044bs.jpg?v=1600506198"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197","options":["Title"],"media":[{"alt":null,"id":6758872940631,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1360,"width":1360,"src":"\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197"},"aspect_ratio":1.0,"height":1360,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197","width":1360},{"alt":null,"id":6758872973399,"position":2,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/diytech.cc\/cdn\/shop\/products\/Hbc52e3cd29d543ba9841993f276dcb6aD.jpg?v=1600506198"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/Hbc52e3cd29d543ba9841993f276dcb6aD.jpg?v=1600506198","width":750},{"alt":null,"id":6758873006167,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1360,"width":1360,"src":"\/\/diytech.cc\/cdn\/shop\/products\/XH-M609-12-36V-Battery-Low-Voltage-Disconnect-Protection-Module-DC-Output.jpg?v=1600506198"},"aspect_ratio":1.0,"height":1360,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/XH-M609-12-36V-Battery-Low-Voltage-Disconnect-Protection-Module-DC-Output.jpg?v=1600506198","width":1360},{"alt":null,"id":6758873038935,"position":4,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/diytech.cc\/cdn\/shop\/products\/H08caddf454084467a08823b89ee1044bs.jpg?v=1600506198"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/H08caddf454084467a08823b89ee1044bs.jpg?v=1600506198","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eParameter:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct name: Battery over-discharge protection module\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct model: HCW-M635\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower supply voltage: DC12-36V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOutput voltage: equal to the supply voltage\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eControl accuracy: 0.1V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower consumption: \u0026lt;1.5W\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUse range: various storage batteries \/ lithium batteries\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight: 28g\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct size: 57 x 42 x 19mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 12.5V and start above 14V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 10V and start above 15.5V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReset:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the power is off, press and hold both buttons at the same time, and then power on. At this time, \"888\" is displayed on the screen to indicate that the factory reset is successful.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFactory set protection value: 12V, return difference: 2V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eScope of application:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSuitable for all electric two-wheel tricycle batteries in the applicable voltage range;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCar battery and new energy electric vehicle battery discharge protection;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOver-discharge protection of various batteries;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSolar, wind and other power supply systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the new battery is used for the first time, the rated voltage value is close to the actual value, and the stop discharge voltage can be judged. A reasonable discharge voltage value can be obtained according to the normal voltage calculation method of the battery.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the old battery is used, the actual voltage value and the rated voltage value are quite different. You need to measure the termination voltage value in actual use yourself.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSlow charging is usually used for battery charging (in the case of fast charging, the voltage and current are relatively large, but the battery is easily damaged.) The slow charging voltage is 1.2 times the rated voltage, and the charging current is adjusted to about 2\/10 of the rated capacity current of the battery. For example, the charging voltage of a 6V50Ah battery is about 7.2 volts, and the charging current is adjusted to 10A.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eReference formula: charging voltage = rated voltage X1.2, charging current = rated current X0.2\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage includes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e1 x Battery over-discharge protection module\u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $0.09{"id":4619673239639,"title":"XH-M609 DC12-36V Voltage Protection Module Solar Lithium Car Battery Undervoltage","handle":"xh-m609-dc12-36v-voltage-protection-module-solar-lithium-car-battery-undervoltage","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eParameter:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct name: Battery over-discharge protection module\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct model: HCW-M635\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower supply voltage: DC12-36V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOutput voltage: equal to the supply voltage\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eControl accuracy: 0.1V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower consumption: \u0026lt;1.5W\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUse range: various storage batteries \/ lithium batteries\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight: 28g\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct size: 57 x 42 x 19mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 12.5V and start above 14V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 10V and start above 15.5V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReset:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the power is off, press and hold both buttons at the same time, and then power on. At this time, \"888\" is displayed on the screen to indicate that the factory reset is successful.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFactory set protection value: 12V, return difference: 2V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eScope of application:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSuitable for all electric two-wheel tricycle batteries in the applicable voltage range;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCar battery and new energy electric vehicle battery discharge protection;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOver-discharge protection of various batteries;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSolar, wind and other power supply systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the new battery is used for the first time, the rated voltage value is close to the actual value, and the stop discharge voltage can be judged. A reasonable discharge voltage value can be obtained according to the normal voltage calculation method of the battery.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the old battery is used, the actual voltage value and the rated voltage value are quite different. You need to measure the termination voltage value in actual use yourself.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSlow charging is usually used for battery charging (in the case of fast charging, the voltage and current are relatively large, but the battery is easily damaged.) The slow charging voltage is 1.2 times the rated voltage, and the charging current is adjusted to about 2\/10 of the rated capacity current of the battery. For example, the charging voltage of a 6V50Ah battery is about 7.2 volts, and the charging current is adjusted to 10A.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eReference formula: charging voltage = rated voltage X1.2, charging current = rated current X0.2\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage includes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e1 x Battery over-discharge protection module\u003c\/p\u003e","published_at":"2020-09-19T17:03:17+08:00","created_at":"2020-09-19T17:03:16+08:00","vendor":"DIYTECH","type":"Battery protection board","tags":[],"price":379,"price_min":379,"price_max":379,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32351398723671,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DT2528","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"XH-M609 DC12-36V Voltage Protection Module Solar Lithium Car Battery Undervoltage","public_title":null,"options":["Default Title"],"price":379,"weight":30,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197","\/\/diytech.cc\/cdn\/shop\/products\/Hbc52e3cd29d543ba9841993f276dcb6aD.jpg?v=1600506198","\/\/diytech.cc\/cdn\/shop\/products\/XH-M609-12-36V-Battery-Low-Voltage-Disconnect-Protection-Module-DC-Output.jpg?v=1600506198","\/\/diytech.cc\/cdn\/shop\/products\/H08caddf454084467a08823b89ee1044bs.jpg?v=1600506198"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197","options":["Title"],"media":[{"alt":null,"id":6758872940631,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1360,"width":1360,"src":"\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197"},"aspect_ratio":1.0,"height":1360,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197","width":1360},{"alt":null,"id":6758872973399,"position":2,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/diytech.cc\/cdn\/shop\/products\/Hbc52e3cd29d543ba9841993f276dcb6aD.jpg?v=1600506198"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/Hbc52e3cd29d543ba9841993f276dcb6aD.jpg?v=1600506198","width":750},{"alt":null,"id":6758873006167,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1360,"width":1360,"src":"\/\/diytech.cc\/cdn\/shop\/products\/XH-M609-12-36V-Battery-Low-Voltage-Disconnect-Protection-Module-DC-Output.jpg?v=1600506198"},"aspect_ratio":1.0,"height":1360,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/XH-M609-12-36V-Battery-Low-Voltage-Disconnect-Protection-Module-DC-Output.jpg?v=1600506198","width":1360},{"alt":null,"id":6758873038935,"position":4,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/diytech.cc\/cdn\/shop\/products\/H08caddf454084467a08823b89ee1044bs.jpg?v=1600506198"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/H08caddf454084467a08823b89ee1044bs.jpg?v=1600506198","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eParameter:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct name: Battery over-discharge protection module\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct model: HCW-M635\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower supply voltage: DC12-36V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOutput voltage: equal to the supply voltage\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eControl accuracy: 0.1V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower consumption: \u0026lt;1.5W\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUse range: various storage batteries \/ lithium batteries\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight: 28g\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct size: 57 x 42 x 19mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 12.5V and start above 14V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 10V and start above 15.5V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReset:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the power is off, press and hold both buttons at the same time, and then power on. At this time, \"888\" is displayed on the screen to indicate that the factory reset is successful.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFactory set protection value: 12V, return difference: 2V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eScope of application:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSuitable for all electric two-wheel tricycle batteries in the applicable voltage range;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCar battery and new energy electric vehicle battery discharge protection;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOver-discharge protection of various batteries;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSolar, wind and other power supply systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the new battery is used for the first time, the rated voltage value is close to the actual value, and the stop discharge voltage can be judged. A reasonable discharge voltage value can be obtained according to the normal voltage calculation method of the battery.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the old battery is used, the actual voltage value and the rated voltage value are quite different. You need to measure the termination voltage value in actual use yourself.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSlow charging is usually used for battery charging (in the case of fast charging, the voltage and current are relatively large, but the battery is easily damaged.) The slow charging voltage is 1.2 times the rated voltage, and the charging current is adjusted to about 2\/10 of the rated capacity current of the battery. For example, the charging voltage of a 6V50Ah battery is about 7.2 volts, and the charging current is adjusted to 10A.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eReference formula: charging voltage = rated voltage X1.2, charging current = rated current X0.2\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage includes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e1 x Battery over-discharge protection module\u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $0.11{"id":4619673239639,"title":"XH-M609 DC12-36V Voltage Protection Module Solar Lithium Car Battery Undervoltage","handle":"xh-m609-dc12-36v-voltage-protection-module-solar-lithium-car-battery-undervoltage","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eParameter:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct name: Battery over-discharge protection module\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct model: HCW-M635\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower supply voltage: DC12-36V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOutput voltage: equal to the supply voltage\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eControl accuracy: 0.1V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower consumption: \u0026lt;1.5W\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUse range: various storage batteries \/ lithium batteries\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight: 28g\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct size: 57 x 42 x 19mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 12.5V and start above 14V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 10V and start above 15.5V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReset:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the power is off, press and hold both buttons at the same time, and then power on. At this time, \"888\" is displayed on the screen to indicate that the factory reset is successful.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFactory set protection value: 12V, return difference: 2V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eScope of application:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSuitable for all electric two-wheel tricycle batteries in the applicable voltage range;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCar battery and new energy electric vehicle battery discharge protection;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOver-discharge protection of various batteries;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSolar, wind and other power supply systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the new battery is used for the first time, the rated voltage value is close to the actual value, and the stop discharge voltage can be judged. A reasonable discharge voltage value can be obtained according to the normal voltage calculation method of the battery.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the old battery is used, the actual voltage value and the rated voltage value are quite different. You need to measure the termination voltage value in actual use yourself.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSlow charging is usually used for battery charging (in the case of fast charging, the voltage and current are relatively large, but the battery is easily damaged.) The slow charging voltage is 1.2 times the rated voltage, and the charging current is adjusted to about 2\/10 of the rated capacity current of the battery. For example, the charging voltage of a 6V50Ah battery is about 7.2 volts, and the charging current is adjusted to 10A.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eReference formula: charging voltage = rated voltage X1.2, charging current = rated current X0.2\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage includes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e1 x Battery over-discharge protection module\u003c\/p\u003e","published_at":"2020-09-19T17:03:17+08:00","created_at":"2020-09-19T17:03:16+08:00","vendor":"DIYTECH","type":"Battery protection board","tags":[],"price":379,"price_min":379,"price_max":379,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32351398723671,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DT2528","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"XH-M609 DC12-36V Voltage Protection Module Solar Lithium Car Battery Undervoltage","public_title":null,"options":["Default Title"],"price":379,"weight":30,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197","\/\/diytech.cc\/cdn\/shop\/products\/Hbc52e3cd29d543ba9841993f276dcb6aD.jpg?v=1600506198","\/\/diytech.cc\/cdn\/shop\/products\/XH-M609-12-36V-Battery-Low-Voltage-Disconnect-Protection-Module-DC-Output.jpg?v=1600506198","\/\/diytech.cc\/cdn\/shop\/products\/H08caddf454084467a08823b89ee1044bs.jpg?v=1600506198"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197","options":["Title"],"media":[{"alt":null,"id":6758872940631,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1360,"width":1360,"src":"\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197"},"aspect_ratio":1.0,"height":1360,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197","width":1360},{"alt":null,"id":6758872973399,"position":2,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/diytech.cc\/cdn\/shop\/products\/Hbc52e3cd29d543ba9841993f276dcb6aD.jpg?v=1600506198"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/Hbc52e3cd29d543ba9841993f276dcb6aD.jpg?v=1600506198","width":750},{"alt":null,"id":6758873006167,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1360,"width":1360,"src":"\/\/diytech.cc\/cdn\/shop\/products\/XH-M609-12-36V-Battery-Low-Voltage-Disconnect-Protection-Module-DC-Output.jpg?v=1600506198"},"aspect_ratio":1.0,"height":1360,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/XH-M609-12-36V-Battery-Low-Voltage-Disconnect-Protection-Module-DC-Output.jpg?v=1600506198","width":1360},{"alt":null,"id":6758873038935,"position":4,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/diytech.cc\/cdn\/shop\/products\/H08caddf454084467a08823b89ee1044bs.jpg?v=1600506198"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/H08caddf454084467a08823b89ee1044bs.jpg?v=1600506198","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eParameter:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct name: Battery over-discharge protection module\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct model: HCW-M635\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower supply voltage: DC12-36V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOutput voltage: equal to the supply voltage\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eControl accuracy: 0.1V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower consumption: \u0026lt;1.5W\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUse range: various storage batteries \/ lithium batteries\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight: 28g\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct size: 57 x 42 x 19mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 12.5V and start above 14V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 10V and start above 15.5V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReset:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the power is off, press and hold both buttons at the same time, and then power on. At this time, \"888\" is displayed on the screen to indicate that the factory reset is successful.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFactory set protection value: 12V, return difference: 2V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eScope of application:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSuitable for all electric two-wheel tricycle batteries in the applicable voltage range;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCar battery and new energy electric vehicle battery discharge protection;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOver-discharge protection of various batteries;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSolar, wind and other power supply systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the new battery is used for the first time, the rated voltage value is close to the actual value, and the stop discharge voltage can be judged. A reasonable discharge voltage value can be obtained according to the normal voltage calculation method of the battery.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the old battery is used, the actual voltage value and the rated voltage value are quite different. You need to measure the termination voltage value in actual use yourself.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSlow charging is usually used for battery charging (in the case of fast charging, the voltage and current are relatively large, but the battery is easily damaged.) The slow charging voltage is 1.2 times the rated voltage, and the charging current is adjusted to about 2\/10 of the rated capacity current of the battery. For example, the charging voltage of a 6V50Ah battery is about 7.2 volts, and the charging current is adjusted to 10A.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eReference formula: charging voltage = rated voltage X1.2, charging current = rated current X0.2\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage includes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e1 x Battery over-discharge protection module\u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $0.11{"id":4619673239639,"title":"XH-M609 DC12-36V Voltage Protection Module Solar Lithium Car Battery Undervoltage","handle":"xh-m609-dc12-36v-voltage-protection-module-solar-lithium-car-battery-undervoltage","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eParameter:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct name: Battery over-discharge protection module\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct model: HCW-M635\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower supply voltage: DC12-36V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOutput voltage: equal to the supply voltage\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eControl accuracy: 0.1V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower consumption: \u0026lt;1.5W\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUse range: various storage batteries \/ lithium batteries\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight: 28g\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct size: 57 x 42 x 19mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 12.5V and start above 14V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 10V and start above 15.5V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReset:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the power is off, press and hold both buttons at the same time, and then power on. At this time, \"888\" is displayed on the screen to indicate that the factory reset is successful.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFactory set protection value: 12V, return difference: 2V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eScope of application:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSuitable for all electric two-wheel tricycle batteries in the applicable voltage range;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCar battery and new energy electric vehicle battery discharge protection;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOver-discharge protection of various batteries;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSolar, wind and other power supply systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the new battery is used for the first time, the rated voltage value is close to the actual value, and the stop discharge voltage can be judged. A reasonable discharge voltage value can be obtained according to the normal voltage calculation method of the battery.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the old battery is used, the actual voltage value and the rated voltage value are quite different. You need to measure the termination voltage value in actual use yourself.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSlow charging is usually used for battery charging (in the case of fast charging, the voltage and current are relatively large, but the battery is easily damaged.) The slow charging voltage is 1.2 times the rated voltage, and the charging current is adjusted to about 2\/10 of the rated capacity current of the battery. For example, the charging voltage of a 6V50Ah battery is about 7.2 volts, and the charging current is adjusted to 10A.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eReference formula: charging voltage = rated voltage X1.2, charging current = rated current X0.2\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage includes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e1 x Battery over-discharge protection module\u003c\/p\u003e","published_at":"2020-09-19T17:03:17+08:00","created_at":"2020-09-19T17:03:16+08:00","vendor":"DIYTECH","type":"Battery protection board","tags":[],"price":379,"price_min":379,"price_max":379,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32351398723671,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DT2528","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"XH-M609 DC12-36V Voltage Protection Module Solar Lithium Car Battery Undervoltage","public_title":null,"options":["Default Title"],"price":379,"weight":30,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197","\/\/diytech.cc\/cdn\/shop\/products\/Hbc52e3cd29d543ba9841993f276dcb6aD.jpg?v=1600506198","\/\/diytech.cc\/cdn\/shop\/products\/XH-M609-12-36V-Battery-Low-Voltage-Disconnect-Protection-Module-DC-Output.jpg?v=1600506198","\/\/diytech.cc\/cdn\/shop\/products\/H08caddf454084467a08823b89ee1044bs.jpg?v=1600506198"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197","options":["Title"],"media":[{"alt":null,"id":6758872940631,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1360,"width":1360,"src":"\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197"},"aspect_ratio":1.0,"height":1360,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197","width":1360},{"alt":null,"id":6758872973399,"position":2,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/diytech.cc\/cdn\/shop\/products\/Hbc52e3cd29d543ba9841993f276dcb6aD.jpg?v=1600506198"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/Hbc52e3cd29d543ba9841993f276dcb6aD.jpg?v=1600506198","width":750},{"alt":null,"id":6758873006167,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1360,"width":1360,"src":"\/\/diytech.cc\/cdn\/shop\/products\/XH-M609-12-36V-Battery-Low-Voltage-Disconnect-Protection-Module-DC-Output.jpg?v=1600506198"},"aspect_ratio":1.0,"height":1360,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/XH-M609-12-36V-Battery-Low-Voltage-Disconnect-Protection-Module-DC-Output.jpg?v=1600506198","width":1360},{"alt":null,"id":6758873038935,"position":4,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/diytech.cc\/cdn\/shop\/products\/H08caddf454084467a08823b89ee1044bs.jpg?v=1600506198"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/H08caddf454084467a08823b89ee1044bs.jpg?v=1600506198","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eParameter:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct name: Battery over-discharge protection module\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct model: HCW-M635\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower supply voltage: DC12-36V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOutput voltage: equal to the supply voltage\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eControl accuracy: 0.1V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower consumption: \u0026lt;1.5W\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUse range: various storage batteries \/ lithium batteries\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight: 28g\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct size: 57 x 42 x 19mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 12.5V and start above 14V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 10V and start above 15.5V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReset:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the power is off, press and hold both buttons at the same time, and then power on. At this time, \"888\" is displayed on the screen to indicate that the factory reset is successful.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFactory set protection value: 12V, return difference: 2V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eScope of application:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSuitable for all electric two-wheel tricycle batteries in the applicable voltage range;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCar battery and new energy electric vehicle battery discharge protection;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOver-discharge protection of various batteries;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSolar, wind and other power supply systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the new battery is used for the first time, the rated voltage value is close to the actual value, and the stop discharge voltage can be judged. A reasonable discharge voltage value can be obtained according to the normal voltage calculation method of the battery.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the old battery is used, the actual voltage value and the rated voltage value are quite different. You need to measure the termination voltage value in actual use yourself.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSlow charging is usually used for battery charging (in the case of fast charging, the voltage and current are relatively large, but the battery is easily damaged.) The slow charging voltage is 1.2 times the rated voltage, and the charging current is adjusted to about 2\/10 of the rated capacity current of the battery. For example, the charging voltage of a 6V50Ah battery is about 7.2 volts, and the charging current is adjusted to 10A.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eReference formula: charging voltage = rated voltage X1.2, charging current = rated current X0.2\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage includes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e1 x Battery over-discharge protection module\u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $0.11{"id":4619673239639,"title":"XH-M609 DC12-36V Voltage Protection Module Solar Lithium Car Battery Undervoltage","handle":"xh-m609-dc12-36v-voltage-protection-module-solar-lithium-car-battery-undervoltage","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eParameter:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct name: Battery over-discharge protection module\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct model: HCW-M635\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower supply voltage: DC12-36V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOutput voltage: equal to the supply voltage\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eControl accuracy: 0.1V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower consumption: \u0026lt;1.5W\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUse range: various storage batteries \/ lithium batteries\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight: 28g\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct size: 57 x 42 x 19mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 12.5V and start above 14V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 10V and start above 15.5V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReset:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the power is off, press and hold both buttons at the same time, and then power on. At this time, \"888\" is displayed on the screen to indicate that the factory reset is successful.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFactory set protection value: 12V, return difference: 2V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eScope of application:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSuitable for all electric two-wheel tricycle batteries in the applicable voltage range;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCar battery and new energy electric vehicle battery discharge protection;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOver-discharge protection of various batteries;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSolar, wind and other power supply systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the new battery is used for the first time, the rated voltage value is close to the actual value, and the stop discharge voltage can be judged. A reasonable discharge voltage value can be obtained according to the normal voltage calculation method of the battery.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the old battery is used, the actual voltage value and the rated voltage value are quite different. You need to measure the termination voltage value in actual use yourself.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSlow charging is usually used for battery charging (in the case of fast charging, the voltage and current are relatively large, but the battery is easily damaged.) The slow charging voltage is 1.2 times the rated voltage, and the charging current is adjusted to about 2\/10 of the rated capacity current of the battery. For example, the charging voltage of a 6V50Ah battery is about 7.2 volts, and the charging current is adjusted to 10A.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eReference formula: charging voltage = rated voltage X1.2, charging current = rated current X0.2\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage includes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e1 x Battery over-discharge protection module\u003c\/p\u003e","published_at":"2020-09-19T17:03:17+08:00","created_at":"2020-09-19T17:03:16+08:00","vendor":"DIYTECH","type":"Battery protection board","tags":[],"price":379,"price_min":379,"price_max":379,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32351398723671,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DT2528","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"XH-M609 DC12-36V Voltage Protection Module Solar Lithium Car Battery Undervoltage","public_title":null,"options":["Default Title"],"price":379,"weight":30,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197","\/\/diytech.cc\/cdn\/shop\/products\/Hbc52e3cd29d543ba9841993f276dcb6aD.jpg?v=1600506198","\/\/diytech.cc\/cdn\/shop\/products\/XH-M609-12-36V-Battery-Low-Voltage-Disconnect-Protection-Module-DC-Output.jpg?v=1600506198","\/\/diytech.cc\/cdn\/shop\/products\/H08caddf454084467a08823b89ee1044bs.jpg?v=1600506198"],"featured_image":"\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197","options":["Title"],"media":[{"alt":null,"id":6758872940631,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1360,"width":1360,"src":"\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197"},"aspect_ratio":1.0,"height":1360,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/H5bb8a217f9d04f9584f90348a24a49063.jpg?v=1600506197","width":1360},{"alt":null,"id":6758872973399,"position":2,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/diytech.cc\/cdn\/shop\/products\/Hbc52e3cd29d543ba9841993f276dcb6aD.jpg?v=1600506198"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/Hbc52e3cd29d543ba9841993f276dcb6aD.jpg?v=1600506198","width":750},{"alt":null,"id":6758873006167,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1360,"width":1360,"src":"\/\/diytech.cc\/cdn\/shop\/products\/XH-M609-12-36V-Battery-Low-Voltage-Disconnect-Protection-Module-DC-Output.jpg?v=1600506198"},"aspect_ratio":1.0,"height":1360,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/XH-M609-12-36V-Battery-Low-Voltage-Disconnect-Protection-Module-DC-Output.jpg?v=1600506198","width":1360},{"alt":null,"id":6758873038935,"position":4,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/diytech.cc\/cdn\/shop\/products\/H08caddf454084467a08823b89ee1044bs.jpg?v=1600506198"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/diytech.cc\/cdn\/shop\/products\/H08caddf454084467a08823b89ee1044bs.jpg?v=1600506198","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eParameter:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct name: Battery over-discharge protection module\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct model: HCW-M635\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower supply voltage: DC12-36V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOutput voltage: equal to the supply voltage\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eControl accuracy: 0.1V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower consumption: \u0026lt;1.5W\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUse range: various storage batteries \/ lithium batteries\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight: 28g\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct size: 57 x 42 x 19mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 12.5V and start above 14V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet to stop below 10V and start above 15.5V:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the protection value: press \"+ 一次 once to display the protection value, double-click\" + 〃 \", the decimal point flashes, and then press\" +,-\"to change the value to 12.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSet the hysteresis value: press \"-〃 once to display the hysteresis value, double-click\" -〃, the decimal point will flash, and press \"+,-\" to change the value to 1.5. After no operation for 3 seconds, the module will automatically save and exit the setting mode.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReset:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the power is off, press and hold both buttons at the same time, and then power on. At this time, \"888\" is displayed on the screen to indicate that the factory reset is successful.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFactory set protection value: 12V, return difference: 2V\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eScope of application:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSuitable for all electric two-wheel tricycle batteries in the applicable voltage range;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCar battery and new energy electric vehicle battery discharge protection;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOver-discharge protection of various batteries;\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSolar, wind and other power supply systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the new battery is used for the first time, the rated voltage value is close to the actual value, and the stop discharge voltage can be judged. A reasonable discharge voltage value can be obtained according to the normal voltage calculation method of the battery.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the old battery is used, the actual voltage value and the rated voltage value are quite different. You need to measure the termination voltage value in actual use yourself.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSlow charging is usually used for battery charging (in the case of fast charging, the voltage and current are relatively large, but the battery is easily damaged.) The slow charging voltage is 1.2 times the rated voltage, and the charging current is adjusted to about 2\/10 of the rated capacity current of the battery. For example, the charging voltage of a 6V50Ah battery is about 7.2 volts, and the charging current is adjusted to 10A.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eReference formula: charging voltage = rated voltage X1.2, charging current = rated current X0.2\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage includes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e1 x Battery over-discharge protection module\u003c\/p\u003e"}
